Cummins calterm 3 http://www.1obd.com/cummins-calterm is created to modify fueling calibration parameters and feature settings in an engineering improvement and test environment.

1. Cummins Calterm 3
Cummins Calterm III is an engineering development device used to
monitor Electronic Control Modules for Cummins engine systems and to
alter the calibration data contained therein. Cummins Calterm III is
designed to change fueling calibration parameters and feature
settings in an engineering development and test environment.
Purpose
The development procedure for electronic engines requires PC support
equipment which interface to the electronic subsystem, and its
diverse feature sets. Cummins Calterm III is used to boost the
productivity of the engineers developing electronic engine features
by providing diagnostics, simulation, and value manipulation
capabilities for Electronic Control Modules (ECMs).
As is the case with most support equipment, Cummins Calterm 3 tries
to work with all of the features in the ECM. However, this superset
of functionality is not always feasible given the rapid growth and
change being experienced in Cummins’ electronic systems. As a way to
try to provide the most support to every electronic engine program,
this device will provide a base set of abilities which will work on
any ECM following the CORE Tools Interface standards. Customized or
unique capabilities will then be added, as they are needed.
The latest version Cummins Calterm 3 was initially designed to
support the Global Tool Interface Specification, GTIS, 4.5 and Core-
II based software. With the release of Cummins Calterm 3, version 3.0
, support for virtually all Cummins electronic engines is
supported.*CM300 is not supported.

2. http://www.1obd.com/cummins-calterm
New Functions supported in Cummins Calterm 3
·Default range-checking and order-checking to “None”
·Concurrent calibration edit and data monitor sessions
·Concurrently monitor tables and parameters
·Shortcut method to move between screens
·Persist all graphical data monitor settings
·Concurrent logging of multiple screens
·Edit parameters outside their group
·Enhancements to F1 search
·Multiple Logging Rates
·Persist editor settings
·Export from module
·Overlay to module
·Monitor tables
About Cummins Calterm 3 “Aconcagua”
Cummins Calterm 3 “Aconcagua” 3.0.0 is designed to support all
Cummins electronic control modules from Core-1/GTIS Pre-2 to Core
2/GTIS 4.5. Cummins Calterm 3 replaces the legacy tools: Calterm II,
NGET, Unlock and Engineering ESDN. Considering the amount of User
Interface and functional changes to the Cummins Calterm 3, version
3.x tool, it is fitting that these builds are connected with Mountain
range nicknames.