tank top plant

1. TANK TOP PLANT
(SUITABLE FOR HOT CLEANING)
Tank top plant from Lehui consists of weight loaded safety
valve, weight loaded vacuum valve, CIP/CO2
separating
valve, and it can be used for Fermenters, BBTs, Yeast tanks
and buffer tanks.
The spray ball or jet cleaner is supplied according to
customer’s requirement.
The pneumatic lifting devices used for opening of safety
valve and vacuum valve during CIP, for the cleaning of
valve seals.
Tank top plant without this fuction then will fail to clean the
dead end of sealing surface of the valve.
Pressure transmitter can be installed for monitoring of tank
pressure. Safety valve and vacuum valve can be opened
according to tank pressure.Sight glass and pocket of sensor
are equipped.
A heating device will be installed on the tank top plant if it
is used in cold area to avoid the safety valve and vacuum
valve cannot be opened because of frozen.

2. TANK TOP PLANT (SUITABLE FOR HOT CLEANING)
Two pneumatic cylinders installed
for lifting safety valve and vacuum
valve during CIP process. The valve
seat can be cleaned completely.
Name
Pressure safety valve
Vacuum-proof valve
CIP valve
Gas-liquid separating valve
CIP pipe
(mm)
Nominal
Diameter
(mm)
(Mpa）
Working
Pressure
(Mpa）
0.07-0.35
-
0.15-0.2
-
0.3-0.6
(H2
Omm）
Vacuum
Degree
(H2
Omm）
-
100-250
-
-
-
Xiangxi Industrial Zone, Xiangshan County,
Zhejiang 315722, P.R.China
Tel.+86-574-6583 3333 Fax.+86-574 6583 6111
E.mail: weixin@lehui.com
www.lehui.com