4. 1 (step) Pasta
BILL OF MATERIAL
- 1 Inox Cooking Bowl.
- 2 Handles.
- 4 Medium Rivets.
- 1 Large Strainer.
- 3 Large Rivets.
- 1 Handle Holder.
- 3 Small Rivets.
- 1 Handle.
- 1 Cover/Handle
Since everything is assambled by Rivets, the
only things needed are a Rivel Tool and a Drill.
All parts are Stadarized and Bought from a
retailer.
Only the moving mechanism has been made
tailored.
5. 1 1 (step) Pasta
DESCRIPTION The main component
of the 1 (step) Pasta is the cooking bowl. It’s a
regular stainless steel bown which can already
be found with the two handles attatched to it.
Is in this step when all the bores are made. If the
bowl already has a pair of handles, the ammount
of bores are 5: Two in opposite sides on top for
the strainer, one in the middle top to hold the
strainers movement, and two more on one side
of the bown to place the handle.
15 Minutes
Rivet Tool
Driller
The Bowl and the Handles are standard parts
6 parts
€20
6. 2 1 (step) Pasta
DESCRIPTION We then placed the
strainer inside the pot and hold it with two
rivets.
As you can see, the strainer is just slightly
smaller than the main bowl. This is to provide
the maximum amount of efficiency regarding
volume. This way the amunt of water needed is
the same as oif there were no strainer.
40 Minutes
Rivet tool
Driller
The strainer is bought and standard.
3 Parts
€5.00
7. 3 1 (step) Pasta
DESCRIPTION The rivets are placed
in opposite sides to ensure the movement of the
strainer from one axis.
The purpose of these rivets are to guide the
movement of the strainer, or on a more specific
way, to hold the strainer still while the pot
moves.
The weight of the pasta will make sure the
strainer is always paralel to the floor, which then
allows the bowl to move freely to empty the
water.
10 Minutes
Rivet tool
Driller
The rivets are bought and standard.
1 Part
€0.10
8. 4 1 (step) Pasta
DESCRIPTION Now we placed the
mechanism thats in charge of holding the handle
with the pot. This part is also placed with two
rivets and it is were the rest of the handle will be
placed.
This part wil be the on ein charge to place the
handle in a downward angle with the purpose of
making the product’s usage more ergonomic.
This way the hand and arm are in a more natural
state and causes less effort.
10 Minutes
Rivet tool
Driller
The rivets are bought and standard.
3 Part
€1.00
9. 5 1 (step) Pasta
DESCRIPTION The handle holding
mechanism is hidden with a small aluminium
strip that, besides protecting the mechanism
itself, it provides an aesthetic added value.
It also helps reinforce the holding mechanism
since it offers support on the whole edge of the
strip, increasing the surface area where the
weight of the pot can rest.
10 Minutes
Driller
Screwdriver
The screws and the handle cover are
bought and standard.
3 Part
€12.00
10. 6 1 (step) Pasta
DESCRIPTION Overall, the production
of the 1 (step) Pasta is quite simple and
economic. Fortunately all of the parts are
existing standarized parts so the viability to
manufacture and introduce to the market is
really high.
14. BEN.CAMARILLO@GMAIL.COM
TEL +32 0478.08.03.98
CHAVO_ORTIZ@HOTMAIL.COM
TEL +32 0474.11.31.96
INES.MERVEILLIE@HOWEST.BE
TEL +32 0498.36.16.55
GRIMONPREZ.BART@HOWEST.BE
TEL +32 0456.24.12.11
http://designforeveryone.howest.be/