1. Christian G. Vallejo 713-416-6121
7543 Brush Wood DR. Houston TX. 77088 oxign@yahoo.com
ProfessionalProfile
My main goal at any company for me is to achieve the highest level of satisfaction and execute company policies either while being
supervised or unsupervised. Maximize customer satisfaction in turn produce more work for the company to produce more profit. Qua
has always been my greatest asset because I believe in no room for error
• Carried a weapon for 7 years on the
job (gun permit).
• I have driven a company vehicle for
7 years on the job accident free.
• I have knowledge of OSHA
standards and DOT regulations.
• I have 5S experience.
• I have numerous certificates for safety in transportation.
• Every year I receive a safety bonus.
• Executed numerous tasks at once (multitasking).
• 280 hour NCCER certification through Sparc Academy
• AWS D1.1 certification for plate through Sparc
Academy.
• GMAW, FCAW,SMAW, TIG, SAW,and plasma
torch, carbonarc gouging,oxyfueltorch.
WORK HISTORY
Trinity Meyer Structural Steel (DBA THOMAS and BETTS, DBA ABB) Houston Texas 10/2012-
11/2015
• Weld per Wps and D1.1 codes on structural towers base plates and flanges
• Duties included but not limited to updating lead personalon status ofmy current status of work
in place at my station.
• documented all paperwork of base plates and flange plates that I would work on for heat travlers
for future company audits.
• I corrected and detailed all of my visual welds.
• Performed all job duties with respect and executed all to be done in a timely and safe manner.
• Show current welders tips and tricks to perfom better welds with less time under the welding
hood.
• I performed all the stainless steelwelds in my department using E309L 1/8" electrodes using a
Miller or Fronius welding power supply.
• I did field work repair all over the southwestern United States using the SMAW process some
ground work and some work in the 200 feet in the air wearing a body harness and connected to
the cranes boom with the umbilical cord.
• I did some fitting using engineered blue prints for current assingments.
• I had to maintain my company credit card(American Express) in my name expense account using
the Concur program and the company spreadsheet for my expense on my field repair.
• Plenty of knowledge using plasma arc cutters,oxy-fuel torch cutting, and Carbon-arc gouging

2. cutting.
One Source Reel (Houston, Texas) 8/12-10/12
• My job duties included supervising 35 employees.
• Assisted in obtaining work for the company (sales).
• I was in charge of ordering supplies and material for everyday duties assigned by the company
owner.
• I made sure all employees followed safety guidelines per OSHA and company safety rules.
• I would assist welders and fitters with thier daily assingments when needed to keep up with the
daily orders.
• I would mentor welders and showthem how they can benefit from my knowledge and skill.
MetalSkills-(Houston, Texas) 6/12-8/12
• I prepared test plates and test pipe to be welded on for future job candidates to be hired.
• preperation included cutting test pieces to test size with a Oxy/Fuel Torch creating a 45 degree bevel
and refining the edge with a grinder.
• I would also prepare pipe the similiar preperation. I would leave a 1/8" gap in all test pieces for a
complete root pass penetration.
• Also I assisted and I would inspect all welders to be using the correct WPS provided by the future
employers. I would inspect that all welding process were followed and that all the weld passes were
to D1.1 code per AWS for all the weld process.(MIG,FCAW,SMAW,TIG,SAW)
• Finally after any welder would finish their test piece I would inspect for good visual welds (cap
passes width and hieght). I would take the test piece and cut two pieces from each test piece
7"Lx3/8"W and I would bend each piece for any cracks within the weld and I would document the
results for the employer looking to hire the testing welder.
• I would perform visual and parameter welding audits at random on all welders testing from all weld
positions.(1GF,2GF,3GF,4GF,5G,6G, and 6GR
GARDA-ATM service and cash handler (Chicago, IL-transferred-Houston, TX) 6/05 -1/12
• I was in charge of communicating problems on the field to supervisors and solved the issues while on
the field resulting in satisfactory results.
• I was in charge of distributing money for 7 routes for a whole year. I also was a coordinator for the
ATM department.
• Finally I became in charge of a route executed assingments in a timely manner with very minimal
overtime with no room for error.

3. • I worked in a military law enforecment enviorment.
Crescent cardboard- Order picker (Wheeling, IL) 01/05,6/05
• I was in charge of fulfilling customer orders
• I used a pallet jack and a forklift to do my job duties
• I worked in a warehouse atmosphere.
RCS-Record Copy Technician (Chicago, IL) 8/01,01/05
• I documented notes and furbished records for attorneys for all of Illinois
• I drove a company vehicle unsupervised.
• Knowledge of HIPAA regulations.
Education
NCCER AWS
Certification
H.S. diploma
Sparc Academy
Houston,Texas
Morton East High School,
Cicero, IL
2012
1999
References
References are available upon request.