Classic Cars Nissan offers you excellent sales and service on new or used Nissan vehicles. Stop in and test drive a Nissan 2010 GT-R or any car or truck today! We're located Hainesport New Jersey between Cherry Hill and Mount Holly. Only 20 minutes from Philadelphia. Classic Cars Nissan 1513 Route 38 Hainesport, NJ 08036 866-CLASSIC or 866-252-7742
3. Black plate (2,1)
The NISSAN GT-R, introducing you
to a new genre of supercars
The legend of the GT-R began in May of 1964 in Japan when the affectionately termed “boxy” Skyline passed a Porsche 904 at a hairpin curve on the
Suzuka Circuit.
The GT-R legend continued on the Japanese racing circuits and in the sports car world when the GT-R was equipped with a powerful engine and state-of-
the-art all-wheel drive system in August of 1989.
A new legend is in the making for the 21st century. The “NISSAN GT-R” is now available worldwide.
During development, the NISSAN GT-R was taken to the Nurburgring in Germany, a racetrack used for performance evaluation benchmarking of
supercars. While being driven by a professional driver, the GT-R set a record time of 7 minutes 38 seconds even though the road surface of the most
difficult high-speed corner, the “kesselchen” was wet. The GT-R also handled an endurance test totaling approximately 3,000 miles (5,000 km), setting
the world’s fastest continuous driving lap time of 7 minutes 55 seconds. Additionally, to make sure the GT-R performs off the track as well as it does on the
track, the vehicle was designed to perform on many types of roads from a scorching freeway to snow swept country roads.
A new legend is born.
Model "R35-D" EDITED: 2008/ 12/ 22
5. Black plate (4,1)
Foreword
Welcome to the growing family of new NISSAN READ FIRST — THEN DRIVE SAFELY features to all occupants of the
owners. This vehicle is delivered to you with Before driving your vehicle, please read this vehicle.
confidence. It was produced using the latest Owner’s Manual carefully. This will ensure . ALWAYS review this Owner’s Man-
techniques and strict quality control. familiarity with controls and maintenance re-
ual for important safety information.
quirements, assisting you in the safe operation
This manual was prepared to help you under-
of your vehicle.
stand the operation and maintenance of your MODIFICATION OF YOUR VEHICLE
vehicle so that you may enjoy many miles
(kilometers) of driving pleasure. Please read WARNING This vehicle should not be modified. Mod-
ification could affect its performance,
through this manual before operating your
IMPORTANT SAFETY INFORMATION safety or durability, and may even violate
vehicle.
REMINDERS FOR SAFETY! governmental regulations. See the 2010
A separate Warranty Information Booklet NISSAN GT-R Warranty Information Book-
contains the warranties covering your Follow these important driving rules to let for details including applicable exclu-
vehicle (whose terms have control over help ensure a safe and comfortable trip sions.
this Owner’s Manual or any other docu- for you and your passengers!
ment or representation regarding warranty . NEVER drive under the influence of
WHEN READING THE MANUAL
coverage). The “NISSAN Service and Main- alcohol or drugs. This manual includes information for all
tenance Guide” explains details about options available on this model. Therefore,
. ALWAYS observe posted speed lim- you may find some information that does
maintaining and servicing your vehicle.
its and never drive too fast for not apply to your vehicle.
Additionally, a separate Customer Care/ conditions.
Lemon Law Booklet (U.S. only) will explain All information, specifications and illustrations in
. ALWAYS give your full attention to
how to resolve any concerns you may have this manual are those in effect at the time of
driving and avoid using vehicle printing. NISSAN reserves the right to change
with your vehicle, as well as clarify your
rights under your state’s lemon law. features or taking other actions that specifications or design at any time without
could distract you. notice.
Your NISSAN dealership knows your vehi-
. ALWAYS use your seat belts and
cle best. When you require any service or
have any questions, they will be glad to appropriate child restraint systems.
assist you with the extensive resources Pre-teen children should be seated
available to them. in the rear seat.
. ALWAYS provide information about
the proper use of vehicle safety
Model "R35-D" EDITED: 2008/ 12/ 22
6. Black plate (5,1)
IMPORTANT INFORMATION ABOUT Arrows in an illustration that are similar to those
THIS MANUAL above call attention to an item in the illustration.
You will see various symbols in this manual. They
are used in the following ways: This indicates the title and reference page.
WARNING CALIFORNIA PROPOSITION 65
WARNING
This is used to indicate a hazard that
could cause death or serious personal WARNING
injury. To avoid or reduce the risk,
follow the information and instructions Engine Exhaust, some of its constitu-
exactly. ents, and certain vehicle components
contain or emit chemicals known to the
State of California to cause cancer and
CAUTION birth defects or other reproductive
This is used to indicate a hazard that If you see the symbol above, it means “Do not harm. In addition, certain fluids con-
could cause minor or moderate perso- do this” or “Do not let this happen”. tained in vehicles and certain products
nal injury. To avoid or reduce the risk, of component wear contain or emit
follow the information and instructions chemicals known to the State of Cali-
carefully. fornia to cause cancer and birth defects
If you see a symbol similar to those above in an or other reproductive harm.
illustration, it means the arrow points to the front
NOTICE of the vehicle. CALIFORNIA PERCHLORATE ADVI-
This is used to indicate a hazard that SORY
could cause damage to property or your Some vehicle parts, such as lithium bat-
vehicle. To avoid or reduce the risk, teries, may contain perchlorate material.
Arrows in an illustration that are similar to those The following advisory is provided: “Per-
follow the information and instructions.
above indicate movement or action. chlorate Material - special handling may
apply, See www.dtsc.ca.gov/
hazardouswaste/perchlorate.”
Model "R35-D" EDITED: 2008/ 12/ 22
7. Black plate (6,1)
* 2009 NISSAN MOTOR CO., LTD.
C
All rights reserved. No part of this Owner’s
Manual may be reproduced or stored in a
retrieval system, or transmitted in any form, or
by any means, electronic, mechanical, photo-
copying, recording or otherwise, without the
prior written permission of NISSAN Motor Co.,
Ltd.
Model "R35-D" EDITED: 2009/ 3/ 11
8. Black plate (7,1)
NISSAN CUSTOMER CARE PROGRAM
NISSAN CARES ...
Both NISSAN and your GT-R certified NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your
GT-R certified NISSAN dealer are our primary concerns. Your GT-R certified NISSAN dealer is always available to assist you with all your automobile sales
and service needs.
However, if there is something that your GT-R The Consumer Affairs Department will ask for You can write to NISSAN with the information on
certified NISSAN dealer cannot assist you with the following information: the left at:
or you would like to provide NISSAN directly For U.S. customers
with comments or questions, please contact the — Your name, address, and telephone number
NISSAN North America, Inc.
NISSAN Consumer Affairs Department using — Vehicle identification number (attached to Consumer Affairs Department
our toll-free number: the top of the instrument panel on the P.O. Box 685003
For U.S. customers driver’s side) Franklin, TN 37068-5003
1-866-668-1GTR For Canadian customers
(1-866-668-1487) — Date of purchase
NISSAN Canada Inc.
For Canadian customers — Current odometer reading 5290 Orbitor Drive
1-800-387-0122 Mississauga, Ontario L4W 4Z5
— Your NISSAN dealer’s name
— Your comments or questions
OR
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
Model "R35-D" EDITED: 2008/ 12/ 22
10. Black plate (1,1)
Table of GT-R Overview GTR
Contents Illustrated table of contents 0
Safety — Seats, seat belts and supplemental restraint system 1
Instruments and controls 2
Pre-driving checks and adjustments 3
Display screen, heater, air conditioner and audio systems 4
Starting and driving 5
In case of emergency 6
Appearance and care 7
Maintenance and do-it-yourself 8
Technical and consumer information 9
Index 10
Model "R35-D" Edited: 2009/ 3/ 11
13. Black plate (4,1)
GT-R SPECIAL SPECIFICATION
GT-R SPECIFIC INFORMATION PARTS
The GT-R is NISSAN’s first supercar category . Deleting any or all stored information in any
vehicle. The GT-R is equipped with special computer, control unit or electronic module, NOTICE
systems. These systems are different than those
. Failure to have required Performance Opti- Only use the following required fluids
used on conventional vehicles to allow for the
mization Services performed. and parts in the GT-R to avoid possible
high performance driving characteristics of this
vehicle. Your vehicle should be maintained by a vehicle damage.
In addition, see your Dunlop/Goodyear and
GT-R certified NISSAN dealer. Special skills, Bridgestone tire warranties for specific limita-
knowledge and equipment are necessary to tions or exclusions for operating summer tires
ENGINE OIL
properly maintain your GT-R. below −208C (−48F). Mobil 1 (0W-40) (100% synthetic oil)
WARRANTY INFORMATION MAINTENANCE INFORMATION Mobil 1 (0W-40) (100% synthetic) is the factory
fill oil. The VR38 engine with its plasma-sprayed
Please read this Owner’s Manual carefully, . Special skills, knowledge and equipment are bores was developed using this oil. NISSAN
together with your Warranty Information Booklet necessary to properly inspect and adjust the cannot ensure proper engine operation and
which describes a number of express limitations, GT-R engine, transmission, suspension and durability if other 0W-40 synthetic oil is used.
exclusions and ways to void your warranty for brakes to maintain performance. A GT-R If Mobil 1 (0W-40) is not available, Mobil 1
failing to follow the instructions contained in this certified NISSAN dealer has the GT-R (10W-40) (100% synthetic) may be used;
Owner’s Manual, including, but not limited to: certified technical staff and the special however, some performance loss may be
. Failure to use proper parts, fuel and fluids, equipment to properly maintain your GT-R. noticed. The use of additives is prohibited.
. Driving with the VDC off, . NISSAN recommends maintenance items Replace the engine oil and engine oil filter at the
that require the replacement of parts, engine same time.
. Racing, oil, oil filters and air filters should be
performed by a GT-R certified dealer. Make TRANSMISSION OIL
. Any competitive driving of any sort whatso- sure the specified fluids and parts are used
ever, Genuine NISSAN Transmission Oil R35
when the maintenance is performed. Special (100% synthetic oil)
. Use on a track or driving on any airstrip, NISSAN also recommends the replacement
of parts such as brakes should be performed The GT-R uses a multiple-disc dual wet clutch
. Modifications, including adding/replacing, by a GT-R certified NISSAN dealer. transmission. The specially developed transmis-
reprogramming, attempting to reprogram, sion oil maximizes the friction characteristics of
altering, disconnecting any computer, con- the clutch and the lubrication of the gear
trol unit or electronic modules, bearings. The use of additives is prohibited.
GTR-2 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
14. Black plate (5,1)
DIFFERENTIAL OIL (front and rear) . Genuine GT-R tires and road wheels help BRAKE PAD AND DISC ROTOR
Castrol SAF-XJ 75W-140 (100% synthetic achieve: Genuine GT-R brake pads and disc rotors
oil) — maximum cornering and braking perfor- Use only genuine GT-R brake pads and disc
The GT-R uses a 1.5-Way mechanical Limited mance rotors.
Slip Differential (LSD) to maximize driving power — maximum tire durability during accelera-
under many operating conditions. Use the tion This vehicle is equipped with cross-drilled
specified differential oil to maximize the perfor- floating rotors and radial-mounted six-piston
— maximum handling capability during per- monoblock calipers. This helps to achieve
mance of the LSD. Also use the same oil for the formance driving
front differential. The use of additives is excellent stopping performance and fade-resis-
prohibited. . Genuine GT-R tires and road wheels help tance. Replace all four sets of brake pads and
provide road holding in the event of de- disc rotors at the same time to maintain
BRAKE FLUID creasing tire pressure and punctures. maximum brake performance.
Genuine NISSAN Brake Fluid R35 Special . Genuine GT-R tires and road wheels help EXHAUST MUFFLER
II prevent the decrease of straight-running
stability caused by uneven tire wear due to Genuine GT-R special exhaust muffler and
Genuine NISSAN Brake Fluid R35 Special II is trunk carpet.
the factory fill brake fluid. The Vehicle Dynamic high rigidity wheels and wide tires.
Control (VDC) unit and other related parts were Use only genuine GT-R special exhaust muffler
SUSPENSION
specially designed for this brake fluid. NISSAN and trunk carpet.
cannot ensure the best performance and proper Genuine GT-R special suspension
The GT-R has high exhaust gas temperatures. If
operation of the vehicle if other brake fluid is Use only genuine GT-R special suspension non-GT-R specification parts are used, it is
used. components. possible that the muffler will deform and cause
TIRES AND ROAD WHEELS damage to the underbody. Also do not remove
The suspension components, such as shock
the trunk carpet from the vehicle for any reason.
Genuine GT-R tires and road wheels absorbers, springs and stabilizer are specifically
The carpet insulates the vehicle interior from the
designed for the GT-R to provide good driva-
Use only genuine GT-R tires and road wheels. heat of the muffler and from the noise of the
bility on many road surfaces.
transmission.
The GT-R uses specially designed run-flat tires
and matching road wheels. Use of these
specially developed tires and wheels provides
the greatest potential for maximum performance.
GT-R Overview GTR-3
Model "R35-D" EDITED: 2009/ 3/ 11
15. Black plate (6,1)
GT-R PERFORMANCE
OPTIMIZATION SERVICES
EXTERIOR PARTS (spoiler, etc.) In addition to the regular maintenance recom- . Repairs and adjustments involving
Do not modify exterior parts. mended by NISSAN, the GT-R requires the parts replacement, etc. determined to
following special inspections: be necessary as a result of these
The GT-R was developed using a special wind inspections are performed at the cus-
tunnel to help make sure the vehicle is . Wheel alignment inspection and adjustment tomer’s expense.
aerodynamically balanced. Additionally, the wind (if necessary) (including tire pressure ad-
tunnel was used to help make sure cool air flows justment) . See the 2010 NISSAN GT-R Warranty
to the brakes, radiator and other components. Information Booklet for significant lim-
. Engine settings (balancing right and left air itations, exclusions and possible void-
Additions of non-GT-R specific accessory ex- flow)
terior parts can change the air flow over and ing of your warranty resulting from
around the body. This can affect vehicle balance . Transmission settings failure to have these necessary inspec-
and cooling of various systems. tions, repairs and/or adjustments per-
These inspections are required at the following
formed.
For example, if the front bumper is modified, intervals:
there is a possibility that brake cooling perfor- . See the 2010 NISSAN GT-R Service and
mance may be reduced due to the decrease of . 1,000 miles Maintenance Guide for a detailed ex-
the air flow to the brake system. . 12 months planation of the GT-R Performance
Optimization Services.
NOTICE . 24 months
Modifications to exterior parts may . 36 months WHEEL ALIGNMENT INSPECTION
affect engine and transmission cooling NOTE: AND ADJUSTMENT (if necessary)
performance which can increase the . These inspections will be performed (including tire pressure adjustment)
temperature in the engine compart- free of charge for labor at a GT-R This vehicle is equipped with a high perfor-
ment. This can affect the operation or certified NISSAN dealer only. Inspec- mance suspension. The vehicle’s wheel align-
damage parts located in the engine tions thereafter are recommended ment needs to be measured and adjusted (if
compartment. every 12 months or 12,000 miles necessary) by a GT-R certified NISSAN dealer
(whichever comes first) at the custo- as necessary as the vehicle is driven and the
suspension parts break-in.
mer’s expense. See the 2010 NISSAN
GT-R Warranty Information Booklet for
details.
GTR-4 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
16. Black plate (7,1)
PRECAUTIONS BEFORE DRIVING
ENGINE SETTINGS (balancing right VEHICLE DYNAMIC CONTROL (VDC) . Damage to the powertrain or any
and left air flow) OFF MODE drivetrain component(s) that occurs
Each cylinder bank of this engine operates Always make sure the VDC is ON before driving when there is a record in the Vehicle
independently due to the vehicle’s twin turbo- the vehicle by checking that the VDC OFF Status Data Recorder (VSDR) that
charger design. Each side of the engine must indicator lights on the meter and the VDC set-up the vehicle was driven with VDC off
operate at the same level of performance. The air switch are not illuminated. The GT-R is a high during the period when the damage
flow of each bank must be checked and performance vehicle and the VDC must be on/ was incurred is excluded from war-
adjusted as necessary by a GT-R certified activated to provide proper powertrain operation ranty coverage.
NISSAN dealer. and intended drivability.
TRANSMISSION SETTINGS See your 2010 Warranty Information Booklet for
WARNING important related information and warranty
The design of the clutch and transmission coverage exclusions. See also section 2 (page
requires inspection and adjustment of the clutch . The VDC OFF mode should ONLY be 2-28) and section 5 (page 5-42) of this Owner’s
and shift forks by a GT-R certified NISSAN used briefly to help free the vehicle Manual, “Transmission Clutch Temperature
dealer at the recommended intervals. Depend- if stuck in snow or mud by tempora- High” and “Vehicle Dynamic Control (VDC)
ing on the driving conditions, more frequent rily stopping operation of the VDC System” for important additional related informa-
adjustments may be necessary to help maximize to maintain wheel torque. tion.
vehicle performance.
. Driving the GT-R with the VDC off SUMMER TIRES
may lead to handling issues related
The GT-R summer tires are made from a
to steering maneuvers, acceleration, specially formulated rubber to maximize the
or deceleration. Moreover, driving vehicle’s performance capabilities. Performance
with the VDC off can result in an of summer tires is substantially reduced when
inoperative vehicle by causing ser- temperatures are less than 328F (08C) so you
ious damage to the powertrain, must drive carefully. NISSAN recommends the
including damage to the Transaxle use of winter or all-season tires on all four
Assembly including Transfer, Clutch, wheels if you plan to operate your vehicle in
Gears, Transaxle case and all of its snowy or icy conditions when temperatures are
components and other drivetrain less than 328F (08C).
component(s) by overheating or ex-
cessive force.
GT-R Overview GTR-5
Model "R35-D" EDITED: 2009/ 3/ 11
17. Black plate (8,1)
BODY REPAIR ADDITIONAL MAINTENANCE ITEMS
The body of the GT-R has been manufactured The information and specifications in this
WARNING on special fixtures utilizing a hybrid structure section apply only when engaging in
Never use summer tires when the with aluminum die cast parts for the frame work. performance driving.
temperature is below −48F (−208C) to Special skills, information and equipment are
required to correctly repair the body. Contact a The following information applies only if you
prevent permanent tread deformation engage in performance driving such as driving
which may cause tire damage or tire GT-R certified NISSAN dealer if the vehicle is
damaged, such as in a collision, and they will your GT-R for extended periods under the
failure. This may cause a loss of vehicle following conditions.
recommend an appropriate body shop.
control which can result in serious
Only certified body shops using CELETTE® . Higher-RPM (approaching redline) opera-
personal injury or death.
advanced collision repair equipment are ap- tion
ALL-SEASON TIRES proved by NISSAN for repairing structural body . Frequent high pedal force braking from
Do not exceed the speed rating of the tire that is damage. Contact a GT-R certified NISSAN moderate and higher speeds
dealer or NISSAN Consumer Affairs for a
installed on the vehicle. . Frequent throttle activation
referral or list of certified body shops.
. Fast revving throughout the RPM range
In such cases, the following additional main-
tenance guidelines apply.
However, you should also carefully read
your 2010 NISSAN GT-R Warranty Informa-
tion Booklet for important information
concerning warranty coverage, limitations
and exclusions.
We recommend that maintenance be performed
at a GT-R certified NISSAN dealer. NISSAN will
only pay for GT-R Performance Optimization
Services performed at a GT-R certified NISSAN
dealer.
GTR-6 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
18. Black plate (9,1)
FLUIDS er’s Manual.
The information and specifications in this
section apply only when engaging in
performance driving.
. Before driving, check the fluid levels and
adjust as necessary using the specified fluid
as described under the conditions listed in
ADDITIONAL MAINTENANCE ITEMS. If you
do not drive under the conditions listed, refer
to the 2010 Service Maintenance Guide.
. NISSAN recommends to adjust the engine
oil level to be 0.39 in (10 mm) below the H
mark on the engine oil dipstick. Before
checking the oil level, run the engine until it
reaches operating temperature and wait at . Adjust the power steering fluid level to the R
least 5 minutes after turning off the engine. mark * on the power steering dipstick
5
Make sure the oil level always remains above when the fluid temperature is hot or * 6
the L mark. when the fluid temperature is cold.
. Be sure to change the fluids with the Fluid temperature:
specified fluids after driving.
( “RECOMMENDED FLUIDS AND Hot: 122 to 1768F (50 to 808C): between
MAINTENANCE INTERVAL” page GTR-8). * and *
1 5
. Fluid temperature can be checked on the Cold: 32 to 868F (0 to 308C): between *
3
multi function display. and *6
— Engine Coolant Temperature
— Engine Oil Temperature
— Transmission Oil Temperature
See the separate Multi Function Display Own-
GT-R Overview GTR-7
Model "R35-D" EDITED: 2009/ 3/ 11
19. Black plate (10,1)
RECOMMENDED FLUIDS AND
MAINTENANCE INTERVAL
The information and specifications in this section apply only when engaging in
performance driving.
ITEMS Engine Oil
GT-R SPECI-
Mobil 1 (0W-40)*1
FIED FLUIDS
Change engine oil and engine oil filter at the same
. When the oil temperature stays
interval as Schedule 1 and 2 in the 2010 NISSAN
below 2308F (1108C) while driving
GT-R Service and Maintenance Guide section.
MAINTENANCE . When the oil temperature reaches
Change engine oil and engine oil filter every 1,800
INTERVAL between 2308F (1108C) and 2668F
miles (3,000 km).
(1308C) while driving
. When the oil temperature exceeds Change engine oil and engine oil filter immediately
2668F (1308C) while driving after stopping.
ITEMS Transmission Oil
GT-R SPECI-
Genuine NISSAN Transmission Oil R35 Special
FIED FLUIDS
Change transmission oil at the same interval as
. When the oil temperature stays
Schedule 1 and 2 in the 2010 NISSAN GT-R
below 2308F (1108C) while driving
Service and Maintenance Guide section.
. When the oil temperature reaches
MAINTENANCE Change transmission oil every 1,800 miles (3,000
between 2308F (1108C) and 2848F
INTERVAL km).
(1408C) while driving
Change both transmission oil and differential oil
. When the oil temperature exceeds
immediately after stopping. Differential oil tempera-
2848F (1408C) while driving
ture usually increases concurrently.
GTR-8 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
20. Black plate (11,1)
The information and specifications in this section apply only when engaging in INSPECTION AND ADJUSTMENTS
performance driving. OF TIRES, SUSPENSION, CLUTCH
AND BRAKES
ITEMS Differential Oil (front and rear)
The information and specifications in this
GT-R SPECIFIED FLUIDS Castrol SAF-XJ 75W-140
section apply only when engaging in
MAINTENANCE INTERVAL Change differential oil every 1,800 miles (3,000 km). performance driving.
. Measure and adjust the wheel alignment.
ITEMS Brake Fluid
. Check tire wear.
GT-R SPECIFIED FLUIDS Genuine NISSAN Brake Fluid R35 Special II*2
MAINTENANCE INTERVAL Change brake fluid every 3,000 miles (5,000 km). . Check the tire pressure and adjust the
pressure as necessary when the tires are
*1: Mobil 1 (0W-40) (100% synthetic) is the factory fill oil. The VR38 engine with its plasma-sprayed bores was cold. ( “Tire pressure” page GTR-11).
developed using this oil. NISSAN cannot ensure proper engine operation and durability if other 0W-40
synthetic oil is used. If Mobil 1 (0W-40) is not available, Mobil 1 (10W-40) (100% synthetic) may be used; . Make sure the tire valve stem cap is installed
however, some performance loss may be noticed. and that the valve stem is tight.
*2: Genuine NISSAN Brake Fluid R35 Special II is the factory fill brake fluid. The Vehicle Dynamic Control (VDC)
unit and other related parts were specially designed for this brake fluid and NISSAN cannot ensure the best . Make sure the wheel nuts are tight.
performance and proper operation of the vehicle if other brake fluid is used. ( “WHEELS AND TIRES” page 8-28).
. Make sure the drive shaft nuts are tight.
. Secure road wheel balance weights with
aluminum tape or equivalent.
GT-R Overview GTR-9
Model "R35-D" EDITED: 2009/ 3/ 11
21. Black plate (12,1)
should be bled before engaging in perfor-
mance driving and when replacing the brake
fluid. It is recommended that bleeding the
brake be performed when the brake calipers
are hot (about 2128F (1008C)).
. Check the engine, transmission, differential
and under the vehicle for oil and coolant
leaks.
. Before engaging in performance driving, the
clutch clearance may need to be adjusted.
See your GT-R certified NISSAN dealer for
information.
NOTICE
. Make sure the tire has not slipped on the Failure to have the clutch properly
wheel causing the assembly to be out of adjusted before performance driving
balance. The reference marks on the tire and may cause the transmission oil tem-
wheel should be aligned. If the reference perature to increase which may cause
marks are not aligned, the tire has slipped on
transmission damage.
the wheel. Have the wheels/tires reba-
lanced. Make sure the old reference marks . Check the steering and suspension system
are erased and new reference marks are and other links for loose and/or damaged
applied to the wheel and tire. When instal- parts before and after driving.
ling new tires on the wheels, make sure new
reference marks are applied to the wheels
and tires.
. Check for the heat deterioration of the
brakes and parts around the brakes.
. NISSAN recommends that the brakes
GTR-10 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
22. Black plate (13,1)
RECOMMENDED ADJUSTMENTS FOR MAXIMUM PERFORMANCE REPLENISHING COOLANT
The information and specifications in this section apply only when engaging in The information and specifications in this
performance driving. section apply only when engaging in
Tire pressure performance driving.
Condition Pressure PSI (kPa)
Check the coolant level in the pressurized
coolant reservoir. Adjust the level so that the
Starting to drive (Tires are cold) All: 29.0 (200) fluid is between the MAX and MIN markings. For
Increasing tire pressure (Tires are hot) Front: 39.2 (270), Rear: Not exceeding 37.7 (260) the coolant, use genuine NISSAN Long Life
coolant. (On delivery of new vehicle, the
reservoir is filled to the MIN level. Be sure to
replenish approximately 0.3 to 0.4 US quart (0.3
to 0.4 liter) of coolant.)
NOTICE
Do not overfill the coolant. This may
increase the pressure in the cooling
system and cause coolant leaks.
COOLANT MIXTURE RATIO
The information and specifications in this
section apply only when engaging in
performance driving.
To maximize vehicle performance, the coolant
mixture ratio should be a combination of 30%
antifreeze and 70% demineralized or distilled
water for maximum cooling system performance
regardless of ambient temperatures.
If ambient temperatures are anticipated below
58F (−158C), make sure a proper mixture ratio of
GT-R Overview GTR-11
Model "R35-D" EDITED: 2009/ 3/ 11
23. Black plate (14,1)
GT-R SPECIFIC VEHICLE
CHARACTERISTICS
50% antifreeze and 50% demineralized or REFUELING PRECAUTIONS
distilled water mix is used. NOTICE
At the completion of performance driv- WARNING
COOL DOWN
ing, all fluid and other adjustments
The information and specifications in this should be returned to the normal fluid Do not attempt to top off the fuel tank
section apply only when engaging in specifications as shown in the “Main- after the fuel pump nozzle shuts off
performance driving. automatically. Continued refueling may
tenance and do-it-yourself” section of
Cool down the vehicle to help extend the life of this manual. cause fuel overflow, resulting in fuel
the vehicle if coolant temperatures are extremely spray and possibly a fire. The fuel tank
high. Drive the vehicle at 37 to 50 MPH (60 to is full at the first automatic shutoff.
80 km/h), in 5th or 6th gear for 2 to 3 miles (3 to
5 km) and then stop the engine. To maximize vehicle performance, the fuel tank is
located as low as possible to lower the vehicle
BRAKE PAD BREAK-IN center of gravity. The tank is also divided into
The information and specifications in this two parts. This fuel tank design causes higher
section apply only when engaging in pressures inside the tank than other vehicles so
performance driving. fuel spillage is possible by trying to top off the
fuel tank after automatic shutoff.
Break-in procedure
NISSAN recommends that a special brake pad
REFUELING STOPS BEFORE THE
break in procedure be performed before enga- TANK IS FULL
ging in performance driving. Contact a GT-R The fuel tank pressure is higher when the vehicle
certified NISSAN dealer for details. is hot. If the vehicle is refueled when the vehicle
is hot, the fuel pump may automatically shut off
before the tank is full. This does not indicate that
there is a malfunction. Do not attempt to top off
the fuel tank after the fuel pump nozzle shuts off
automatically.
This will not happen after the vehicle has cooled.
GTR-12 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
24. Black plate (15,1)
GASOLINE SMELL ENGINE SPEED IS RESTRICTED UNEVEN WEAR OF TIRES
The fuel temperature is higher when the vehicle To help protect the engine, the maximum engine The GT-R is equipped with high performance,
is hot. This may cause a gasoline smell from the speed is automatically controlled in the following low profile, run-flat tires that are optimized for
vehicle. This does not indicate that there is a conditions: performance and handling. The life of these tires
malfunction. The smell will go away when the will be less than those of tires installed on a
fuel temperature has cooled. . Revving the engine with the shift lever in the typical vehicle, and you are likely to experience
& or & position: The maximum engine
P N uneven tire wear and tire noise regardless of the
OUTSIDE TEMPERATURE DISPLAY speed is 5,000 RPM type of tire used.
INDICATES HIGHER TEMPERATURE
. Revving the engine when the engine oil is at NOISES ARE HEARD WHILE DRIV-
Heat from the engine compartment, radiator and a low (below 378F (08C)) or extremely high
intercoolers can affect the outside temperature ING
(over 2758F (1358C)) temperature: The
display. The outside temperature display may maximum engine speed is 4,000 RPM (The . The GT-R brake pads use material that
indicate a higher than actual temperature while provides a high amount of braking power
driving or stopped. This is normal. & position will automatically change to the
M
even in high temperatures. This material can
& position.)
A cause an intermittent screeching noise just
IDLE SPEED IS NOT STEADY before the vehicle comes to a stop when the
BOOST PRESSURE IS RESTRICTED brakes are gently applied. The noise de-
The idle speed may not be steady when the
engine compartment is extremely hot. This is To help protect the engine, the boost pressure is creases as the brake pads wear.
normal. The engine speed will be steady when automatically controlled not to increase when
the engine coolant is at a low or extremely high . A screeching noise may be heard when the
the engine cools down.
temperature. brake pedal is depressed:
In this case, the Malfunction Indicator Light (MIL)
may come on. After a few driving trips, the MIL DISTORTION OF REAR WING — When driving the vehicle for the first time
in the morning,
should turn off. If the light remains on after a few When the vehicle is parked in direct sunlight on
driving trips, have the vehicle inspected by a a hot day, the center of the rear wing may — After leaving the vehicle parked for
GT-R certified NISSAN dealer. become distorted. This is normal. When the extended periods of time, or
surface temperature of the rear wing is reduced, — When the vehicle is damp following rain
the shape of the wing should return to normal. showers or washing the vehicle.
These sounds are normal. The noise is
caused when the brake pads absorb moist-
ure, and the noise stops after the brake is
applied several times.
GT-R Overview GTR-13
Model "R35-D" EDITED: 2009/ 3/ 11
25. Black plate (16,1)
. A screeching noise may also be heard when conditions. — If the brakes are wet when the vehicle is
the brake pedal is depressed: parked and the parking brake is applied
For the first 3,000 miles (5,000 km) of the for a long time.
— When repeatedly applying gentle brak- vehicle’s service life, and for the first 3,000
ing, especially on a curve at a low miles (5,000 km) after a brake replacement, Contact a GT-R certified NISSAN dealer if the
speed, or the brake pad to brake rotor clearance is brake pads and brake rotor have rusted
very small. When parking, apply the parking together.
— When the brake rotors have circular
scores with the brake temperature high. brake and move the shift lever to the & P . To maintain steady braking performance in
position. Idle the engine for more than 20 both extremely high and low temperatures,
seconds without depressing the brake
WARNING pedal. This allows the brake pads to move
the gap between the brake pad and caliper
is larger than normal and large-size brake
Follow the instructions below when away from the rotor so the pad does not pads are used. When driving over a bump, a
parking the vehicle to help prevent the contact the rotor. light rattling sound may be heard from the
brake rotor and brake pads from rust- Additionally, the brakes must be dry before brake pad. This does not indicate that there
ing together. Failure to follow the parking the vehicle after driving on wet roads is a malfunction.
instructions could cause the rotor and or after washing the vehicle. If the roads are . When the brake disc rotor undergoes
pads to rust together. If the rotor and wet, lightly apply the brakes for a short thermal expansion, a ticking noise may be
pads rust together, there may be a distance before parking the vehicle to dry heard from the engaging portion of the
popping noise and some vibration the brakes. After washing the vehicle, dry the wheel and the brake disc rotor. This does
when the vehicle is driven, a wheel brakes by driving on a dry road for a few not indicate that there is a malfunction. The
may not roll correctly, or the brake pads miles and apply the brakes normally based noise will reduce when the temperature
could be damaged. If the pads are on traffic and road conditions. decreases.
damaged, this may reduce the effec- The metallic brake pads and brake disc rotor . In addition to noise resulting from uneven
tiveness of the brake system which may rust together when the brakes are not tire wear discussed in the previous section,
could cause a collision, serious perso- applied: the GT-R tires are more rigid than a typical
nal injury or death. — If the vehicle is not idled for 20 seconds passenger car tire and are made from a
without the brakes applied, or if the specially formulated rubber to maximize the
. The GT-R uses brake pad materials that vehicle’s performance capabilities. These
brakes are applied when the vehicle is
have high metallic content. The brake pad characteristics cause the GT-R tires to have
shut off, the rotor and pads can rust
material helps maintain braking performance more road noise than a typical passenger
together, even when the brake pads are
in a wide range of weather and driving car tire. This road noise is normal.
dry.
GTR-14 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
26. Black plate (17,1)
DUAL CLUTCH TRANSMISSION
. Due to the performance capabilities and MECHANICAL LIMITED SLIP DIF- The GT-R dual clutch transmission is a newly-
requirements of the GT-R, the sequential 6- FERENTIAL (LSD) CHARACTERIS- developed system that uses an electronically
speed dual clutch transmission is unlike a TICS controlled multiple-disc wet clutch attached to
typical automatic transmission. You will likely The differential oil has a high viscosity and is the highly efficient manual transmission. This
hear mechanical sounds from the transmis- very thick when cold. If the vehicle accelerates transmission has two driving modes.
sion, particularly at slow speeds and at idle. from a stop with the steering wheel turned in
This condition is normal. . & position (Automatic gearshift):
A
cold temperatures, the inner wheel tire may slip allows automatic shifting of the manual
CRACKS ON BRAKE PAD and some noise or vibration may be heard. This transmission.
phenomenon is unique to vehicles equipped
The friction material of the GT-R disc brake pad with the Limited Slip Differential (LSD). When . & position (Manual gearshift):
M
is bonded to the pad backing plate more the steering wheel is returned to the straight- allows quick shifting of the manual transmis-
strongly than conventional brake pads to with- ahead position or the differential oil warms up, sion.
stand the high brake temperatures. The friction the noise and vibration decrease.
material and backing plate expand due to heat at NOTE:
different rates. Some cracks may be on the . & position driving is recommended
M
surface of the friction material due to the when driving up hills or accelerating
differences in expansion rates and the strong from a stop on a cold morning.
bond between the friction material and backing . & position driving is recommended if
M
plate. The cracks do not indicate the brake pads you feel shift shocks or jerkiness in the
need to be replaced.
& position in cold temperatures.
A
BRAKE DUST . When starting or driving on a steep
This vehicle is equipped with high performance uphill grade, shift to the & position
M
brakes, and the characteristics of the brake pad and operate the paddle shifter to shift
material may cause more brake dust than other down to 1st gear similar to a manual
vehicles. NISSAN recommends a wheel coating
transmission vehicle.
that helps prevent the brake dust from sticking
to the wheels. Contact a GT-R certified NISSAN
The GT-R dual clutch transmission was devel-
dealer for more details.
oped specifically to maximize vehicle perfor-
mance and driving enjoyment. The GT-R
transmission components were designed using
different engineering standards than typical
GT-R Overview GTR-15
Model "R35-D" EDITED: 2009/ 3/ 11
27. Black plate (18,1)
passenger car transmissions. Because of this,
the GT-R has different operating characteristics,
and various rattle noises may be heard during
some driving conditions because of the follow-
ing items:
. Gear clearances
. Ultralight flywheel
. Dry sump lubrication
These noises do not indicate that there is a
malfunction.
GTR-16 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
28. Black plate (19,1)
TRANSMISSION OPERATION CHARACTERISTICS
Mechanism Operation characteristics
. When the temperature of the transmission is high, the decreased friction from idling and driving at low speeds can cause rattling, shaking
Base Manual transmission and jarring noises. When the temperature of the transmission decreases, the noise will lessen.
. Clattering noises may be heard while shifting.
. When stopping the vehicle with the shift lever in the & or &↔& position, be sure to firmly depress the brake pedal. The vehicle may
R A M
slowly move if the brake pedal is not depressed.
. Never depress the brake and accelerator pedals at the same time. Depressing the brake and accelerator pedals at the same time could
cause:
— The engine to stall
Multiple disc wet clutch — The clutch to overheat
— Transmission damage
. To prevent stalling or transmission damage, start in first gear. The & position second gear can be used to start moving the vehicle only
M
when reduced torque is necessary on snowy roads or extremely slippery surfaces.
. When the vehicle is stopped on a hill, do not hold the vehicle in place by depressing the accelerator pedal. Doing so may cause the clutch
to overheat and result in transmission damage. Use the brakes to prevent the vehicle from moving.
The following conditions are caused due to changes in fluid viscosity as a result of temperature changes.
. When the transmission fluid is extremely cold or extremely hot, the transmission may feel like it is slipping during shifts or there may be hard
Electronic oil pressure shifts. This is normal. Transmission shifting should return to normal when the transmission fluid returns to normal operating temperatures.
control . When the transmission fluid temperature is extremely cold, the time required to run a system check may increase. During the system check,
the shift lever must stay in the & position. Move the shift lever after turning off the system check display. Also, it is normal to hear clicking
P
noises during the transmission systems check.
. The higher shift speeds in the & position may result in shift shock and jerkiness when starting or shifting.
M
Changing modes . Quick shifting in the R mode with the transmission in the & position is available when the engine speed is high. However, the transmission
M
may shift more slowly when the engine speed is low.
Appropriate gaps are provided between gears to achieve smooth gear rotation and steady tooth surface lubrication under the high-load driving
Gear clearances
condition. However, this causes a rattling noise.
GT-R Overview GTR-17
Model "R35-D" EDITED: 2009/ 3/ 11
29. Black plate (20,1)
Mechanism Operation characteristics
. An ultralight flywheel is provided to achieve rapid engine response to the accelerator pedal operation and quick shifting response to the
paddle shifter operation. These are essential for a supercar. However, you may notice a large rattling noise from gears because engine
rotation fluctuations become larger while idling.
Ultralight flywheel
. Due to changes in engine speed through the operation of the air conditioner, rattling, shaking or jarring noises may be heard when idling or
driving at low speeds.
. Rattling noises may be heard when the engine is started or stopped.
High-efficiency dry sump lubrication is provided to achieve low agitation resistance of lubricant oil and allows smooth transmission gear rotation
Dry sump lubrication that contribute to obtain a perfect balance between outstanding driving performance and improved environmental performance. However, you
may notice some rattling noise due to engine rotation fluctuations.
GTR-18 GT-R Overview
Model "R35-D" EDITED: 2009/ 3/ 11
31. Black plate (24,1)
SEATS, SEAT BELTS AND
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS)
FRONT 5. Seat belt pretensioner (P.1-43)
6. Front seat-mounted side-impact supplemental air
1. Seat belt (Page 1-6) bag system (P.1-32)
2. Rear seat walk-in lever (P.1-5)
7. Occupant classification sensor (pattern sensor)
3. Roof-mounted curtain side-impact supplemental (P.1-37)
air bag system (P.1-32)
8. Front seats (P.1-3)
4. Supplemental front-impact air bags (P.1-32)
0-2 Illustrated table of contents
Model "R35-D" EDITED: 2009/ 3/ 11
32. Black plate (25,1)
REAR
1. Rear seats
— Child restraint installation (P.1-14)
2. Child restraint anchor points (for top tether strap
child restraint) (P.1-17)
3. LATCH (Lower Anchors and Tethers for CHildren)
system (P.1-16)
Illustrated table of contents 0-3
Model "R35-D" EDITED: 2009/ 3/ 11
33. Black plate (26,1)
EXTERIOR
ITEMS GT-R SPECIFIED PARTS
Genuine road wheel specific to
Road wheel
GT-R
Tire*1 Genuine tire specific to GT-R
Genuine brake pad specific to
Brake pad*2
GT-R
Genuine brake disc rotor spe-
Brake disc rotor*2
cific to GT-R
*1: When tire replacement is required, replacing tires
as a set of four with new tires is recommended.
However, if a tire is punctured or damaged, it may
be possible to replace only the damaged tire.
Determining whether one tire or a complete set of
tires should be replaced is based on a number of
factors including tire wear and condition. Contact
your GT-R certified NISSAN dealer. They can
recommend if an individual tire or a complete set
should be replaced.
*2: The brake pad and the brake disc rotor must be
replaced as a set of four with new ones.
Genuine NISSAN Brake Fluid R35 Special II is the
factory fill brake fluid. The Vehicle Dynamic Control
(VDC) unit and other related parts were specially
designed for this brake fluid. NISSAN cannot
6. Headlight and turn signal (P.2-47, P.8-25) ensure the best performance and proper operation
FRONT
7. Tires and wheels (P.5-3, P.6-2, P.8-28, P.9-7) of the vehicle if other brake fluid is used.
1. Hood (P.3-17)
2. Windshield wiper and washer (P.2-45, P.8-19)
3. Doors (P.3-2, P.3-4, P.3-8)
4. Outside mirrors (P.3-27)
5. Power windows (P.2-56)
0-4 Illustrated table of contents
Model "R35-D" EDITED: 2009/ 3/ 11
34. Black plate (27,1)
ITEMS GT-R SPECIFIED FUEL
Unleaded premium gasoline with an
octane rating of at least 93 AKI (Anti-
Fuel
Knock Index) number (Research octane
number 98)*1
*1: Use unleaded premium gasoline with an octane
rating of at least 93 AKI (Anti- Knock Index) number
(Research octane number 98) to maximize vehicle
performance. If 93 AKI number (Research octane
number 98) premium gasoline is not available, you
may use unleaded premium gasoline with an
octane rating of at least 91 AKI number (Research
octane number 96), but you may notice a decrease
in performance.
REAR 6. Fuel-filler door (P.3-22, P.9-3)
1. High-mounted stop light (P.8-25) *: Refer to the separate Multi Function Display
Owner’s Manual.
2. Trunk (P.3-8, P.3-19)
3. Rear window defroster (P.2-46)
4. Satellite antenna*
5. Rear combination light (P.8-25)
Illustrated table of contents 0-5
Model "R35-D" EDITED: 2009/ 3/ 11