2. Electric Signals Press Ctrl + B to open up the building tool. Click the magic wand icon to create. Choose the sphere prim. Figure 5.1
3. Electric Signals Click the wand onto the ground to create the sphere. Change the properties according to Figure 5.2 Figure 5.2
4. Electric Signals Go to http://www.cottonnoveltyfabrics.com/fabric/ye_lightning.jpg and save the image. Click Build at the top of the navigation bar and press Upload>Image (L$10). Select the image that was just saved. Click Upload when the upload screen pops up as shown in Figure 5.3. Figure 5.3
5. Electric Signals In the building tool, go to the Texture tab and click the box on top of texture. Click “My Inventory”>Texture>ye_lightning. Click color and select the color yellow as shown in Figure 5.4
7. Electric Signals Set “glow” to 1.00 and check “Full Bright”. While in editing mode, press Ctrl + D to make a copy of the balls that was made.
8. Electric Signals 15) Position the two balls in front of the leads holder and slightly above the leads so it is clickable as shown in Figure 5.5. Figure 5.5