Five in Five
5 Tips for Using Shielding Bags
A basic principle of ESD control in an manufacturing environment is that ESD susceptible items should only be removed from ESD Protective packaging when they are in an ESD protected area (EPA). Most EPAs are made up of “Islands” of control, the packaging / materials handling system must provide proper protection for ESD susceptible items during transport and storage outside those “islands” of control. When moving ESD susceptible items outside an EPA, it is necessary for the product to be packaged in closed ESD Shielding Packaging.
TIP# 1 – NOT A WORKSURFACE
Do not use a shielding bag as an ESD worksurface. Although a shielding is safe to use around a ESD susceptible products is not intended to be a worksurface for product and should set aside or discarded after removing the product from the bag.
TIP# 2 – NO POTHOLDERS OR TACOS
Do not use a shielding bag as an “ESD potholder” or
“ESD taco.”
This type of use offers no ESD protection to the product.
TIP# 3 - ENCLOSE PRODUCT
Shielding bags should be large enough to enclose the entire product and closed with a label or zipper style bag.
TIP# 4 – REMOVE CHARGES
Place closed bag on an ESD worksurface before removing product to remove any charge that might have accumulated on the surface of the bag.
TIP# 5 – DON’T OVER-USE
Re-using shielding bags is acceptable so long as there is no damage to the shielding layer. Bags with holes, tears, or excessive wrinkles should be discarded.
Good Stuff Happens in 1:1 Meetings: Why you need them and how to do them well
Five in Five - Proper ESD Shielding Bag Use
1. Five in Five
5 Tips for Using Shielding Bags
Made in the
United Stated
www.Desco.com
of America
2. A basic principle of ESD control in an manufacturing environment is that
ESD susceptible items should only be removed from ESD Protective
packaging when they are in an ESD protected area (EPA). Most EPAs are
made up of “Islands” of control, the packaging / materials handling
system must provide proper protection for ESD susceptible items during
transport and storage outside those “islands” of control. When moving
ESD susceptible items outside an EPA, it is necessary for the product to be
packaged in closed ESD Shielding Packaging.
Made in the
United Stated
www.Desco.com
of America
3. TIP# 1 – NOT A WORKSURFACE
Do not use a shielding bag as an ESD worksurface. Although a
shielding is safe to use around a ESD susceptible products is not
intended to be a worksurface for product and should set aside
or discarded after removing the product from the bag.
Made in the
United Stated
www.Desco.com
of America
4. TIP# 2 – NO POTHOLDERS OR TACOS
Do not use a shielding bag as an “ESD potholder” or
“ESD taco.”
This type of use offers no ESD protection to the product.
Made in the
United Stated
www.Desco.com
of America
5. TIP# 3 - ENCLOSE PRODUCT
WRONG CORRECT
Shielding bags should be large enough to enclose the
entire product and closed with a label or zipper style bag.
To Determine the Correct Size Bag for your
Made in the
Application, click HERE. www.Desco.com
United Stated
of America
6. TIP# 4 – REMOVE CHARGES
Place closed bag on an ESD worksurface before removing
product to remove any charge that might have
accumulated on the surface of the bag.
Made in the
United Stated
www.Desco.com
of America
7. TIP# 5 – DON’T OVER-USE
Re‐using shielding bags is acceptable so long as there is
no damage to the shielding layer. Bags with holes, tears,
or excessive wrinkles should be discarded.
Made in the
United Stated
www.Desco.com
of America
8. Click for more information on
these products.
Metal‐In Shielding Bags
ESD Packaging Labels
If you have questions regarding shielding bags or
ESD Control please click HERE.
Made in the
United Stated
www.Desco.com
of America