2. Some Projects from CM
Workforce
Top left Pile sleeve BW II
TopRight picture Amplemann
Deck for Offshore Transport
vessel.
Bottom left Central cluster Bard I.
Bottom right Repair on Aluminium
Boat ( Fred Olsen )
3. CM Offshore with there QM Handbook
Tries to demonstrate its ability to
consistently provide a product that meets
customer and applicable statutory and
regulatory requirements, and.
Aims to enhance customer satisfaction
through the effective application of the
system, including processes for continual
improvement of the system and the
assurance of conformity to customer and
applicable statutory and regulatory
requirements.
5. Meeting with company representative for kick off meeting
Checking all possible hazards, issues etc. associated with the project
involved
Working with full safety requirements
Every worker must do initial safety introduction before contract begin
Planning of safety meetings during the project
Nominating safety representatives for the duration of the contract
Look at minimising scaffold requirements, reducing the need for working
at height
HSE Control
6. Workshops
Hall 25
Length: 120 m
Width: 23 m
Sqm: 2.760 m²
10 ton gantry crane (3 pieces) hook height: 6 m
Plasma burning machine Co. Messer „Plasma Multi Therm 4000“
One-to-one burning machine Co. Messer „Burny“
3-drums rotund bending machine Co. Faccin, type „OP3 3134“
Frame bending machine Co. Faccin, type „GNC 400“
CM Offshore and partners
7. Workshops
Hall 14
Length: 50 m
Width: 30 m
Sqm: 150 m²
35 ton crane hook height: 13,6 m
17 ton crane hook height: 14,5 m
CM Offshore and partners
8. Workshops
Hall 8 (smithery)
Length: 32,5 m
Width: 18 m
Sqm: 585 m²
3,2 ton crane hook height: 5,5 m
5,0 ton crane (2 pieces) hook height: 6 m
Plate shear Co. Parat, type „GVX-2030“
CM Offshore and partners
9. Workshops
Hall 8.1 (smithery)
Length: 16,5 m
Width: 18 m
Sqm: 297 m²
Rotund bending machine Co. Schafer KG, type „SRMASY“
Turning machine Co. Labor, type „1805“
Moulding cutter Co. Wewag, type „Starmill“
Band saw Co. Flott, type „HBS 300 H“
Bending machine 1 (old) Co. Schröder „fabr. no. 190116“
Bending machine 2 (new) Co. Haco, type „PPH 36 135“
CM Offshore and partners
10. Workshops
Hall 8.2 (press machine)
Length: 18 m
Width: 18 m
Sqm: 324 m²
5 ton crane hook height: 5,5 m
3,2 ton crane hook height: 5,5 m
1,5 ton crane hook height: 5,5 m
Shipbuilding press machine Co. Hollmann Werke, type „BSP JVG BSP 22.2.00A01“
Plate shear Co. Kramer, type „TMIIIHG 3000“
CM Offshore and partners
11. Automobiles and trucks
Trucks and transporters
4 Mercedes transporters total approved volume: 3,5 ton
1 M.A.N. truck total approved volume: 3,35 ton
Forklifters
1 forklifter Co. Linde, type „H60 D“ (diesel fuel)
1 forklifter Co. Linde, type „H40 D“ (diesel fuel)
1 forklifter type „E 16 C“ (electronical)
CM Offshore and partners