This document summarizes a presentation about drilling fluids. It defines drilling fluid as a mixture of clay and chemicals pumped through a drill bit to provide hydrostatic pressure, suspend cuttings, cool and lubricate the bit, and provide information from the wellbore. The presentation covers the types of drilling fluids, their functions, additives used, and rheological properties measured. It also describes the drilling fluid circulation system and discusses drilling fluid considerations and emergency remedies.
1.5 "Environmental Concern and QA/QC in Shale Gas Drilling and Fracturing" - ...
Drilling fluid: A mixture of clay and chemicals in a defined proportion
1. Abstract
Meaning of drilling fluid
Types of drilling fluid
Drilling fluid additives
Rheological properties of drilling fluid
The doctor of an oil well.
The circulation system.
References
Questions
2. Jacob Ebere ( petroleum engineering AUST.)
Date :Friday, March 30th
, 2012. Venue: Zenith Hall, AUST Campus. Time 6.00pm
Abstract.
Drilling fluid is a mixture of clay and chemicals at predetermined proportion,
used in oil and gas well drilling operations.
This presentation is aimed at explaining the meaning of drilling fluid, the types,
functions, the additives that make up the drilling fluid and the rheological
properties of a drilling fluid and why it is the “doctor” of an oil well.
The discussion will cover the complete circulation process from the suction pit to
the rotary hose to swivel to kelly hose, to the drill pipe to the bit nozzles through
the annulus back to the shale shakers and finally back to the suction pit carrying
bunch of information on the progress of the well as it performs so many functions.
3. mixture of clay and chemicals in a
defined proportion, pumped through
the bit nozzles to the wellbore to
provide hydrostatic pressure ,
suspend and lift cuttings, cool and
lubricate the bit and secure maximum
hole information.
4. Drilling fluid
Water base mudOil mud
Low solid
mud
Oil base
mud
Low toxicity
mud
Pseudo oil
base mud
Native
mud
Special
mud
Air base mud
5. •Suspend and lift drilled cuttings to
surface.
• provides hydrostatic pressure.
• Seal permeable formations.
• Cool, lubricate, and support the drilling
assembly.
• Transmit hydraulic energy to tools and bit.
6. •To prevent or recover stuck pipes.
• Minimize reservoir damage.
• Inhibits sloughing or swollen shale.
• Control corrosion.
• Serves as means of communication
with well.
8. Base oil
Calcium chloride(in form of brine)
Lime
Viscosifier
Primary and secondary emulsifier
Fluid loss agent (usually called FLG)
Barite (weighting agent)
9. Pre-hydrated bentonite.
Salt (KCL, NaCl, CaCl2).
Filtration Control Agent ( soltex).
Guar gum.(polymer).
sodiumcarboxymethyl cellulose
(polymer)
XC-polymer (polymer).
Custic soda (NaOH).
12. Θ600 minus Θ300 = plastic viscosity(cp)
Θ300 minus plastic viscosity =yield point (lb/100ft2
)
Θ600/2 = Apparent viscosity
Θ3 at 10 secs and 10mins = gel strength(lb/100ft2
)
13. remedy to kick.
remedy to blown well.
gas out measurement.
telemetry system.