3. P E R I M E T E R S E C U R I T Y
PERIMETER
INDEX
INVISIBLE PROTECTION 4
e first Catalogue of GPS PLUS, operation, versions, components, characteristics, features 6
“This document is th
Technologies.
Perimeter Security used by our company
PPS, operation, versions, components, characteristics, features 10
We introd uce the technologies the
th special reference to RFC, operation, versions, components, characteristics, features 14
for perimeter security, wi rams
s, the connection diag
more technical aspect
DPS, operation, versions, components, characteristics, features 18
e products have been
and th e configurations. Thes ion has DPP, operation, versions, components, characteristics, features 22
Since 1974, our miss
sold over many years.
most demanding MILES, operation, versions, components, characteristics, features 26
been to satisfy the our
e world. Thanks to
cu stomers around th curity,
eet all requests for se
experience, we can m ars,
d delicate. Over the ye FENCE MOUNTED
even the most extreme an quired
lopment staff have ac PROTECTION 30
our research and deve to
which have allowed us
knowledge and skills, market.
CPS PLUS, operation, versions, components, characteristics, features 32
er in the security
become a world lead broadest outdoor SNAKE, operation, versions, components, characteristics, features 36
Today, ou r company offers the in
product portfolio
peri meter protection
FREE-STANDING
the world.”
PROTECTION 40
WPS, operation, versions, components, characteristics, features 42
Pietro Capula
dard SpA TPS, operation, versions, components, characteristics, featuresl 46
President of GPS Stan
IPS, operation, versions, components, characteristics, features 50
SUN, operation, versions, components, characteristics, features 54
CONFIGURATION SYSTEMS 56
MULTIPLEX2000 58
2 3
4. PERIMETER
N
INVISIBLE PROTECTIO they
nd level and therefore
ection systems are installed below grou
Invisible perimeter prot seen, nor be tampered
with.
can not be sabota ged, as they cannot be etic appearance of the
site.
n wi thout altering the aesth
They ensure protectio
Main characteristics: ;
ent- and building-friendly
d installation is environm shape, it recognizes sm
all animals,
INVISIBLE, undergroun e perimeter and ground
follows th
FLEXIBLE, the system
alarms; , it is weather-resistant;
thus avoiding unwanted r every type of ground
installed unde
ADAPTABLE, it can be d all over the world;
RELIABLE, thou sands of systems installe
low.
MAINTENANCE, very
5. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S G P S P L U S
andar
St
d
GPS
D
N TE
TE
PA
T
C
P
R O D U
GPS Plus PRESSURE DIFFERENCE-BASED system
GPS Plus, Ground Perimeter System, is the ideal solution for sites
at high risk of intrusion.
GPS Plus is designed with DSP microprocessor technology (Digital
Signal Processing). The signal from the sensor is digitized and
analysed in time and frequency domains, providing extremely
accurate processing.
In addition to high immunity to weather related interference, typical
of the underground tube system, the sensor can also identify signals
to be ignored, such as those with a repetitive frequency (rail, road
2-tube compensation valve.
with high traffic density, etc.) and only consider signals generated
during the crossing of the sensititve area by intruders.
The system is passive and, therefore, not detectable.
Versions. GPS Plus is
available in 2- and 4-tube
Operation. GPS Plus is based on the detection of a versions. Both versions are
difference in pressure between two tubes laid down and buried available in Stand-Alone and
along the perimeter to be protected, then filled with a liquid that Multiplex. The Stand-Alone
allows operation even at low temperatures (antifreeze) and properly version, 2- or 4-tube with DSP
pressurized. Crossing the sensitive strip generates a pressure analyser for outdoor use,
difference in the tubes; this is detected by a special transducer and ensures maximum protection of
the signal thus obtained is analysed by the processor, which will 200mt per system.
identify the alarm conditions and send them to the control centre. Multiplex ensures maximum
The system can also store signals generated immediately before and protection of 12.8 Km with a
after the event that can be reviewed later. single perimeter control unit
The ability to calibrate the sensitivity of each section independen- (MIND). The architecture allows
tly allows the system to be adapted to the particular characteri- interconnection of up to 64
stics of each individual installation. MIND units.
GPS Plus intelligent components are self-protected by a "watch dog"
system; in case of shutdown, this will automatically restore normal
operation.
This system can be combined with other protection systems
(perimeter, indoor sensors, CCTV, access control, fire systems) and it
can be centralized with flexible solutions for any requirement and
application.
7
6. P E R I M E T E R S E C U R I T Y
P ROT E Z I O N I I N V I S I B I L I
PERIMETER
GPSPLUS
System configuration.
Components. The system is divided into 3 main parts: the
field, the DSP signal analyser and the central unit.
The field is of the "sensitive" part of the system and it can detect the
events generated during a violation of the protected perimeter.
Characteristics.
It includes: sensors, valves and tubes with the pressurized fluid, which,
Signal processing in the time
if placed in parallel at a distance of 1.2-1.5 mt, form a 3mt-wide sen-
domain.
sitive strip for 2-tube version, and about 6m for the 4-tube version;
this area is up to 200mt long (100mt each zone).
Signal processing in the
The DSP analyser processes the signals generated by sensors.
frequency domain.
The central unit consists of the power supply unit, MIND unit and
relay boards.
Combined frequency-time
MIND unit can handle up to 64 peripheral devices (analysers)
processing.
connected on a single cable (data and power). The connection
between the MIND and the peripherals is via a serial high-speed
Use of masks to characterize
BUS (115,000 bps) and it can reach perimeter lengths of up to 5 km,
and recognize signals sent by
Features. GPS Plus is intrusion attempts, simulated Maintenance: the only
without signal regeneration. MIND can handle a maximum of 16 patented by GPS Standard; the during the calibration. maintenance required is periodic
sensors. system is based on detection of inspection of tube pressure; any
different types of peripheral (GPSPLUS, PPS, RFC, DPS, DPP, SNAKE,
WPS, TPSE and IPS). Using the relay boards alarms from sensors are a difference in pressure Invisible: the installation does reduction is automatically
Detection of signal energy between two parallel rubber not compromise the appearance reported by the system.
made available via voltage-free relay contacts.
levels (spectrum analysis). tubes, buried along the of the site.
With the control software (MPX2000) it is possible to set system
parameters, display the signals and store them in a file, for later perimeter to be protected. Cost effective: half price
Listing per category of signal Passive: it is not detectable by compared to RF systems.
analysis.
energy matrixes. GPS Plus is resistant to weather any instrument (metal detector
conditions, such as rain, snow, or other). Local interface with other
2 local inputs and 2 relay hail, etc., because it works using systems via serial data port, e.g.
outputs available differential signal analysis. Flexible: the system can follow to speed dome, sirens, lights, etc.
(underground version). the contours and shape of the
GP.S sensor is the core Very low percentage of false site. It allows connection, via auxiliary
of GPS Plus perimeter 8 local inputs and 8 relay alarms due to unwanted inputs, of other stand-alone
protection system, outputs available (optional)
patented by vibrations (a train passing by, Adaptable: it works under sensors installed nearby.
GPS in the outdoor analyser highway in the vicinity, etc ...) virtually any surface, so there
Standard. version. thanks to: is no need for any physical It can be integrated with other
-analysis of signals in the time barrier. perimeter protection
Local recording, self- and frequency domain, technologies, by using the same
calibration. eliminating background noise. Reliable: thousands of systems communication BUS, creating
-system self-learning: the system installed all over the world in mixed systems from the various
can be "trained" to recognize over 30 years. perimeter solutions provided by
certain behaviour, such as GPS Standard.
GPS Plus can not be sabotaged, as it is fully invisible.
8 9
7. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S P P S
andar
St
d
GPS
D
N TE
TE
PA
T
C
P
R O D U
PPS System with DETECTION of the crossing POINT
PPS, Perimeter Position System, represents the evolution of the
traditional GPS Plus system. This is also based on pressure
difference detection. The innovative feature of PPS system is the
ability to determine the crossing point of the protected strip with
a maximum resolution of ± 5 mt, giving detection of a maximum of
20 crossing zones, distributed over 200 mt of protection, obtained
with a pair of sensors. The length and number of zones can be
configured using the management software. The pair of GPS sensors are at the heart of
PPS can be easily interfaced with an integrated video surveillance the PPS security system.
system with mobile cameras that automatically display the crossing
point for video-monitoring of the event. The system electronics is
designed with a DSP microprocessor with exceptional processing Versions. PPS is available
and signal analysis power. The signal from the sensor is analysed in as a Stand-Alone version, for
the time and frequency domains, distinguishing common events from maximum protection of 200 mt,
real alarms. and in Multiplex version, for
The signals from sensors are stored in an archive with a time interval maximum protection of 12.8
before and after the alarm. The type of analysis carried out on signals Km, with a single perimeter
from sensors ensures high immunity to environmental and control unit (MIND).
atmospheric events, making this system suitable for installation in The architecture allows
sites subject to particular interference, such as proximity to railways, interconnection of up to 64
roads with heavy traffic or high traffic density. MIND units.
The system is passive and, therefore, not detectable.
Operation. PPS is based on the detection of a difference in pressure between two tubes laid
down and buried along the perimeter to be protected, then filled with a liquid that allows operation
even at low temperatures (antifreeze) and properly pressurized. Crossing the sensitive strip generates a
pressure difference between the tubes; this is detected by a special transducer and the signal thus
obtained is analysed; any alarm condition is sent to the control centre. At the same time, the DSP
analyser processes the signals coming from the two sensors located at the ends of the sensitive area, and
defines the exact crossing point. Furthermore, the system can store signals generated before and after
the event and then review them later. The ability to calibrate the sensitivity of each section independently
allows the system to be adapted to the particular characteristics of each individual installation.
PPS intelligent components are self-protected by a "watch dog" system; in case of shutdown, this will
automatically restore normal operation. This system can be combined with other protection systems
(perimeter, indoor sensors, CCTV, access control, fire systems) and it can be centralized with flexible
solutions for any requirement and application.
11
8. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S P P S
PERIMETER
System configuration.
Components. The system is divided into 3 main parts:
the field sensors, the DSP signal analyser and the central unit.
The field consists of the "sensitive" part of the system, it can detect
the events generated in the course of a violation of the protected Characteristics.
perimeter. It includes: sensors, valves and tubes with the pressurized
fluid, which, if placed in parallel at a distance of 1.2-1.5 mt, form a Signal processing in the time
3mt-wide and max 200mt-long sensitive strip, which can be divided domain.
in a maximum of 20 zones of 10mt each.
The DSP analyser processes the signals generated by the 2 sensors. Signal processing in the no need for any physical barrier.
The central unit consists of the power supply unit, MIND unit and frequency domain.
relay boards. MIND unit can handle up to 64 peripheral devices Reliable: thousands of systems
(analysers) connected on a single cable (data and power). Combined frequency-time installed all over the world in
The connection between the MIND and the peripherals is via a processing. over 30 years.
serial high-speed BUS (115,000 bps) and it can reach perimeter
lengths of up to 5 km, without signal regeneration. MIND can handle Use of masks to characterize Features. PPS is based on Detection of the crossing point Maintenance: the only
a maximum of 16 different types of peripheral (GPSPLUS, PPS, RFC, and recognize signals sent by detection of a difference in with an accuracy of ± 5mt using maintenance required is periodic
DPS, DPP, SNAKE, WPS, TPSE and IPS). Using the relay boards alarms sensors. pressure between two parallel software subdivision of the inspection of tube pressure; any
from sensors are made available via voltage-free relay contacts. rubber tubes, buried along the perimeter into different zones; reduction is automatically
With the control software (MPX2000) it is possible to set system Detection of signal energy perimeter to be protected. this feature allows activation of reported by the system.
parameters, display the signals and store them in a file, for later levels (spectrum analysis). other devices such as, for
analysis. PPS is resistant to weather example, speed dome cameras Cost effective: half price
Listing per category of signal conditions, such as rain, snow, to view, with precision, the compared to RF systems.
energy matrixes. hail, etc., because it works using alarmed zone.
differential signal analysis. Local interface with other
2 local inputs and 2 relay Invisible: the installation does systems via serial data port, e.g.
outputs available Very low percentage of false not compromise the appearance to speed dome, sirens, lights, etc.
(underground version). alarms due to unwanted of the site.
vibrations (a train passing by, It allows connection, via auxiliary
Identification of the crossing highway in the vicinity, etc ...) Passive: it is not detectable by inputs, of other stand-alone
PPS and all security systems by GPS Standard point. thanks to: any instrument (metal detector sensors installed nearby.
can be integrated with each other in a simple and
intuitive way thanks to the new SCS
-analysis of signals in the time or other).
Supervision and Control Local recording. and frequency domain, It can be integrated with other
software. eliminating background noise. Flexible: the system can follow perimeter protection
Self-calibration. -system self-learning: the system the contours and shape of the technologies, by using the same
can be "trained" to recognize site. communication BUS, creating
certain behaviour, such as mixed systems from the various
intrusion attempts, simulated Adaptable: it works under perimeter solutions provided by
during the calibration. virtually any surface, so there is GPS Standard.
PPS can detect the exact crossing point within the protected area.
12 13
9. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S R F C
RFC RADIOFREQUENCY System
RFC is an invisible radiofrequency security system; using two cables
buried at 15-20 cm depth, one of which is the receiver and the
other the transmitter, 1.10-1.20 mt apart, it creates an
electromagnetic field sensitive to target movement in the protected
area.
The system is modular and allows the protection of perimeters
of any length; it is particularly suitable for sites that require a high
levels of protection.
The system electronics contains a DSP microprocessor with
exceptional processing and signal analysis power. The signal from the
RFC mixer is analysed in the time and frequency domain, MIND Control unit.
distinguishing common events from real alarms. The signals from The products, in Multiplex version are real
centralization networks, integrating and
sensors are stored in an archive with a time interval before and after controlling different types of anti-intrusion
the alarm. It can detect a person or a vehicle crossing the sensitive systems, even if manufactured by other
companies.
area and it is insensitive to ground vibrations.
Operation. RFC detects the change of the electromagnetic
field generated by people or objects crossing the sensitive area. Versions. RFC is available
The change of the electromagnetic field recorded by the mixer, by in Stand-Alone version, for
comparing the transmitted and received electromagnetic energy, protection of max 300 mt, and
generates signals that, properly processed and analysed, allow in Multiplex version, for
correct determination of system alarm conditions. protection of max 19.2 Km, with
The real alarm signals are then sent to the control centre. a single perimeter control unit
(MIND). The architecture allows
connecting up to 64 MIND
units.
The picture on the left shows RFC system,
selected as perimeter security system on
occasion of G8 in Heilingendamm, Germany,
in 2007.
15
10. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S R F C
PERIMETER
System configuration.
Components. The system is divided into 3 main parts: the
field sensor, the DSP signal analyser and the central unit.
The first consists of the "sensitive" part of the system which can
detect the events generated in the course of a violation of the
protected perimeter. It includes: Mixer, analyser, Tx and Rx cables.
Each Mixer is connected, via 4 non-sensitive cables, to 4 sensitive
cables (2 transmitters and 2 receivers), generating the sensitive area Characteristics.
of approx. 3mt wide and 300mt-long (150mt per channel). Signal processing in the time
The DSP analyser processes the signals generated by the mixer, domain.
caused by the changes in the electromagnetic field in the sensitive
area. Signal processing in the
The central unit consists of the power supply unit, MIND unit and frequency domain.
relay boards. MIND unit can handle up to 64 peripheral devices
(analysers) connected on a single cable (data and power). Combined frequency-time
The connection between the MIND and the peripherals is via a processing. Features. Interchangeable Very low percentage of false Local interface with other
serial high-speed BUS (115,000 bps) and it can reach perimeter sensors: all sensors work with alarms due to unwanted systems via serial data port, e.g.
lengths of up to 5 km, without signal regeneration. MIND can handle Use of masks to characterize the same frequency as they use vibrations, thanks to: to speed dome, sirens, lights, etc.
a maximum of 16 different types of peripheral (GPSPLUS, PPS, RFC, and recognize signals sent by transmission time multiplexing, -analysis of signals in the time
DPS, DPP, SNAKE, WPS, TPSE and IPS). Using the relay boards alarms sensors. which allows all the sensors to and frequency domain, It allows connection, via auxiliary
from sensors are made available via voltage-free relay contacts. be programmed the same way, eliminating background noise. inputs, of other stand-alone
With the control software (MPX2000) it is possible to set system Detection of signal energy but they can be used on -system self-learning: the system sensors installed nearby.
parameters, display the signals and store them in a file, for later levels (spectrum analysis). different zones. can be "trained" to recognize
analysis. certain behaviour, such as It can be integrated with other
Listing per category of signal Flexibility in cable installation intrusion attempts, simulated perimeter protection
energy matrixes. and maintenance, because: during the calibration. technologies, by using the same
-The sensitive cable is of fixed communication BUS, creating
8 local inputs and 8 relay geometry and it can be used, Invisible: the installation does mixed systems from the various
outputs available (optional). replaced, extended anywhere. not compromise the appearance perimeter solutions provided by
-The cables used to connect the of the site. GPS Standard.
Local recording, self- sensitive cables to the mixer are
calibration. of a standard type and of any Flexible: the system can follow
RFC protection system cable.
Its shape and components allow length. the contours and shape of the
generating an electromagnetic field site.
used to detect dangerous situations Resistant to weather conditions
in the protected areas.
such as rain, snow, hail. Works Adaptable: it works under
with differential analysis of virtually any surface.
signals.
R F C g e n e r a t e s a n e l e c t ro m a g n e t i c f i e l d a ro u n d t h e p ro t e c t e d p e r i m e t e r.
16 17
11. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S D P S
andar
St
d
GPS
D
N TE
TE
PA
T
C
P
R O D U
DPS Dual-technology System
DPS, Dual-Technology Perimeter System, is a dual-technology system
created by the combination of two invisible systems: “GPS PLUS”,
detecting pressure difference, and ”RFC” detecting changes in an
electromagnetic field. Using a DSP microprocessor, DPS allows the
processing of a large number of signals received in a very short time.
The changes in pressure and electromagnetic field generate signals
that, properly processed and analysed, allow the correct
determination of system alarm conditions. The alarm signals
obtained this way are then sent to the control centre.
The system is modular and allows protection of extended RFC cable, combined with GPS Plus security
system, creates a dual-technology perimeter
perimeters. It can generate the alarm event when the signal comes protection system.
separately from the two technologies (OR), or only when the
detection comes from both sensors (AND).
Operation. DPS is based on two different technologies:
GPS Plus and RFC, enhancing their main characteristics. Versions. DPS is available
GPS Plus is based on the detection of the difference in pressure as a Stand-Alone version, for
generated by people or objects on the ground, passing over the maximum protection of 200 mt,
sensitive area. RFC detects changes in the electromagnetic field and in Multiplex version, for
generated by people or objects crossing the sensitive area; it then maximum protection of 12.82
makes a comparison between the radiofrequency energy that is Km, with a single perimeter
transmitted and received. control unit (MIND).
The signals obtained from two sensors are sent to the analyser, The architecture allows
that analyzes and transmits warning or alarm signals to the control interconnection of up to 64
unit. Crossing of the sensitive strip generates a significant change of MIND units.
pressure in the tubes, which is detected by an appropriate
transducer. It also generates a change of the electromagnetic field,
which is detected by the RCF system Mixer.
The signals thus obtained are analysed by the DSP and translated
into warning or alarm signals.
The possibility to calibrate the sensitivity of each leg allows the
system to adapt to the particular characteristics required for each
installation.
19
12. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S D P S
PERIMETER
System configuration.
Components. The system is divided into 3 main parts: the
field, the DSP signal analyser and the central unit.
The first consists of the "sensitive" part of the system, it can detect
the events generated in the course of a violation of the protected
perimeter. It includes: RFC (Mixer) sensor with associated sensitive Flexible: the system can follow
cables and two GPS sensors, with associated tubes and valves. Characteristics. the contours and shape of the
Each Mixer is connected, via 4 non-sensitive cables, to 4 sensitive site.
cables (2 transmitters and 2 receivers). Each GPS sensor is Signal processing in the time
connected to the tubes containing liquid under pressure. domain. Adaptable: it works under
The sensitive area created is approx. 3mt-wide, and a maximum of virtually any surface, so there is
200mt-long (100mt per zone). Signal processing in the no need for any physical barrier.
The DSP analyser processes the signals generated by RFC cables, frequency domain.
provided by the mixer, and GPS sensors. Reliable: thousands of systems
The central unit consists of the power supply unit, MIND unit and Combined frequency-time installed all over the world in
relay boards. MIND unit can handle up to 64 peripheral devices processing. Features. DPS uses two Non-sensitive cables used to over 30 years.
(analysers) connected on a single cable (data and power). perimeter control technologies, connect the sensitive cables to
The connection between the MIND and the peripherals is via a Use of masks to characterize thus ensuring high sensitivity the mixer are of standard type Maintenance: the only
serial high-speed BUS (115,000 bps) and it can reach perimeter and recognize signals sent by and minimizing the percentage and of any length. maintenance required is periodic
lengths of up to 5 km, without signal regeneration. MIND can handle sensors. of unwanted alarms. inspection of tube pressure; any
a maximum of 16 different types of peripheral (GPSPLUS, PPS, RFC, It is resistant to weather reduction is automatically
DPS, DPP, SNAKE, WPS, TPSE and IPS). Using the relay boards alarms Detection of signal energy DPS is based on detection of conditions, such as rain, snow, reported by the system.
from sensors are made available via voltage-free relay contacts. levels (spectrum analysis). the difference in pressure hail, etc., because it works using
With the control software (MPX2000) it is possible to set system between two parallel tubes in differential signal analysis. Cost effective: half price
parameters, display the signals and store them in a file, for later Listing per category of signal rubber, buried along the compared to RF systems.
analysis. energy matrixes. perimeter to be protected. Very low percentage of false
alarms thanks to: Local interface with other
8 local inputs and 8 relay Interchangeable RFC sensors: -analysis of signals in the time systems via serial data port, e.g.
outputs available (optional). sensors work with the same and frequency domain, to speed dome, sirens, lights, etc.
Analysis of data received by frequency as they use the eliminating background noise. It allows connection, via auxiliary
the system in the field
using specific algorithms. Local recording, self- transmission time scanning, -system self-learning: the system inputs, of other stand-alone
calibration. which allows programming the can be "trained" to recognize sensors installed nearby.
same way the sensors and use certain behaviour, such as
them on different legs. intrusion attempts, simulated It can be integrated with other
during the calibration. perimeter protection
The sensitive cable is of fixed technologies, by using the same
geometry and it guarantees easy Invisible: the installation does communication BUS, creating
installation and maintenance; it not compromise the appearance mixed systems from the various
can be used, replaced, extended of the site. perimeter solutions provided by
anywhere. GPS Standard.
DPS uses two perimeter detection technologies.
20 21
13. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S D P P
andar
St
d
GPS
D
N TE
TE
PA
T
C
P
R O D U
Dual-technology System with detection of the
DPP crossing point
DPP, Dual-Technology Perimeter Position System, is a
dual-technology system created by the combination of invisible
systems: PPS, detecting the pressure difference with identification
of the crossing point, and RFC detecting changes in an
electromagnetic field. Through the use of a DSP microprocessor,
this system allows processing a large number of signals received in a
very short time. The change of pressure and electromagnetic field
generate signals that, properly processed and analysed, allow the
correct determination of system alarm conditions. The alarm signals
obtained this way are then sent to the control centre. The system is
modular and allows the protection of extended perimeters. All invisible perimeter protection systems do
not modify the external appearance of the
It can generate the alarm event when the signal comes separately site.
from the two technologies (OR), or only when the detection comes
from both sensors (AND).
Versions. DPP is available
Operation. DPP is based on two technologies, and it uses as a Stand-Alone version, for
their main characteristics according to the type of installation: PPS maximum protection of 200 mt,
and RFC. and in Multiplex version, for
PPS detects the pressure differences created by people or objects maximum protection of 12.82
on the ground, passing over the sensitive area. RFC detects the Km, with a single perimeter
changes in the electromagnetic field generated by people or control unit (MIND).
objects crossing the sensitive area; it then makes a comparison The architecture allows
between the radiofrequency energy that is transmitted and received. interconnection of up to 64
The signals obtained from the two sensors are sent to the analyser, MIND units.
which analyzes and transmits warning or alarm signals to the control
unit. PPS is based on the detection of a difference in pressure
between two tubes laid down and buried along the perimeter to be
protected, then filled with a liquid that allows operation even at low
temperatures (antifreeze) and properly pressurized. Crossing the
sensitive strip generates a pressure difference between the tubes;
this is detected by a special transducer and the signal thus obtained
is analysed; any alarm condition is sent to the control centre.
This system identifies the crossing point. The possibility to calibrate
the sensitivity of each leg allows the system to adapt to the
particular characteristics required for each installation.
23
14. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S D P P
PERIMETER
System configuration.
Components. The system is divided into 3 main parts: the
field, the DSP signal analyser and the central unit.
The first consists of the "sensitive" part of the system, it can detect
the events generated in the course of a violation of the protected
perimeter. It includes: RFC (Mixer) sensor with associated sensitive
cables and two GPS sensors, with associated tubes and valves. Characteristics.
Each Mixer is connected, via 4 non-sensitive cables, to 4 sensitive Invisible: the installation does
cables (2 transmitters and 2 receivers). Each GPS sensor is not compromise the appearance
Signal processing in the time
connected to the tubes containing liquid under pressure.The sensitive of the site.
domain.
area created is approx. 3mt-wide, and a maximum of 200mt-long.
The DSP analyser processes the signals generated by RFC cables, Flexible: the system can follow
Signal processing in the
provided by the mixer, and GPS sensors. the contours and shape of the
frequency domain.
The central unit consists of the power supply unit, MIND unit and site.
relay boards. MIND unit can handle up to 64 peripherals (analysers) Combined frequency-time
connected on a single cable (data and power). The connection processing. Features. DPP uses two can be used, replaced, extended Adaptable: it works under
between the MIND and the peripherals is via a serial high speed perimeter detection anywhere. virtually any surface, so there is
BUS (115.000 bps) MIND allows handling peripherals of 16 different technologies, thus ensuring high no need for any physical barrier.
Use of masks to characterize
types (GPSPLUS, PPS, RFC, DPS, DPP, SNAKE, WPS, TPSE and IPS). and recognize signals sent by sensitivity and minimizing the Non-sensitive cables used to
Using the relay boards alarms from sensors are made available via percentage of unwanted alarms. connect the different cables to Maintenance: the only
sensors.
voltage-free relay contacts. the control unit are of standard maintenance required is periodic
With the control software (MPX2000) it is possible to set system DPP is based on detection of type and of any length. inspection of tube pressure; any
Detection of signal energy
parameters, display the signals and store them in a file, for later the difference in pressure reduction is automatically
levels (spectrum analysis).
analysis. between two parallel rubber It is resistant to weather reported by the system.
Listing per category of signal tubes, buried along the conditions, such as rain, snow,
perimeter to be protected. hail, etc., because it works using Local interface with other
energy matrixes.
differential signal analysis. systems via serial data port, e.g.
Interchangeable sensors: all to speed dome, sirens, lights, etc.
8 local inputs and 8 relay
sensors work with the same Very low percentage of false It allows connection, via auxiliary
outputs available (optional).
frequency as they use alarms thanks to: inputs, of other stand-alone
transmission time multiplexing, -analysis of signals in the time sensors installed nearby.
Local recording, self-
Alarm signals received calibration. which allows all the sensors to and frequency domain,
by GPS sensors and be programmed the same way, eliminating background noise. It can be integrated with other
RFC cables are transmitted perimeter protection
to the control centre
but they can be used on -system self-learning: the system
and different zones. can be "trained" to recognize technologies, by using the same
analysed. certain behaviour, such as communication BUS, creating
The sensitive cable is of fixed intrusion attempts, simulated mixed systems from the various
geometry and guarantees easy during the calibration. perimeter solutions provided by
installation and maintenance; it GPS Standard.
Thanks to 2 technologies, DPP can identify the exact crossing point.
24 25
15. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S M I L E S
MILES FIBRE OPTIC FOR PIPELINE System
MILES is a protection system for ducts and pipelines.
It uses a fibre optic cable and has a very high detection capability,
being totally immune to electromagnetic interference and
atmospheric conditions.
The fibre optic cable requires no power in the field and, therefore,
power supply units along the protected perimeter protected are not
required.
The system allows the protection of very long pipelines (gas, oil
pipelines, etc.), up to 50 km, and the area where the sabotage is
taking is identified to the nearest few hundred meters. Fibre optic is The fibre optic is the sensitive part of the
MILES system, as it is particularly sensitive to
installed over the pipe to be protected, whether it is visible or mechanical stress produced during
underground. Modular up to thousands of kilometres, with power attempted sabotage. MILES can use an
supply points every 50 km. existing fibre optic.
Operation. The fibre optic cable is subjected to mechanical
stress caused by stimuli, such as pressure, vibration and motion,
which changes the transmission characteristics of the light inside
the fibre. The change is minimal, but with a source of coherent light
obtained with laser diodes and sophisticated amplifier and processing
systems, a signal that can be processed can be obtained.
The careful analysis of the signal and the ability to change, using a
calibration and monitoring software, specific parameters that
determine the system operation, give this product excellent
performance characteristics.
27
16. P E R I M E T E R S E C U R I T Y
I N V I S I B L E P ROT E C T I O N S M I L E S
PERIMETER
System configuration.
Components. The system is divided into 2 main parts:
fibre optic in the field and PC-based signal analyser in a control
room. The fibre optic is the system “sensor” and it is sensitive to
mechanical stress produced during attempted sabotage (digging the
ground, explosion, hammering, etc.).
The analyser processes the signals generated by the differences
between the transmitted and received light beams using
sophisticated software algorithms. It consists of the laser light Characteristics.
generator, the light reception components and the PC-based signal
analyser. Via a LAN interface port, using priority protocol, it Signal processing in the time
generates the alarm signals coming from various parts of the system. domain.
MILES is resistant
With dedicated control software it is possible to set system to weather conditions such as rain,
parameters, display the signals and store them in a file for later Signal processing in the snow, hail.
analysis. frequency domain.
Combined frequency-time
processing. MILES does not need
Features. MILES is can be "trained" to recognize any power supplies
resistant to weather conditions, certain behaviour, such as in field.
Use of masks to characterize such as rain, snow, hail, etc., attempted sabotage, simulated
and recognize signals sent by because it works with spectrum during the calibration.
sensors. analysis of signals.
Immune to electromagnetic
Detection of signal energy Very low percentage of false disturbances.
MILES is resistant
The MILES analyser processes the signals generated by to electromagnetic
the differences between the transmitted and received levels (spectrum analysis). alarms due to disturbances such interference.
light beams using sophisticated software algorithms.
as wind, vibration caused by Calibration is carried out when
Listing per category of signal heavy loads passing nearby, etc. the system is installed (in real
energy matrixes. This is thanks to: operating conditions), to
-analysis of signals in the time “simulate” the type of detection
Local recording, self- and frequency domain, thus desired, thus ensuring very high
calibration. eliminating background noise. immunity to any interference.
-system self-learning: the system
MILES can use fibre optic already installed on the pipeline.
28 29
17. PERIMETER
ION
FENCE MOUNTED PROTECT
re; they
ire a supporting structu
n systems asso ciated with fences requ intrusion.
The perimeter protectio used by an attempted
ped in the supporting structure ca
detect the stress develo s.
nic cable and fibre optic
n are associate d with fences, micropho s as
Two types of protectio l with audio frequencie
rates an electrical signa
coaxial cable that gene signals are then proces
sed to
The first consists of a tempted intrusion. The
al stress of an at
a result of the mechanic
on.
verify the alarm conditi
sion
en the attempted intru
eanwhile, gene rate an alarm signal wh sity is transformed into
an
Fibre optic systems, m the received light inten
e fibre; the change of
produces a stress on th
alarm.