1. John F. Hoyt
166 Little Mill Rd.
Sandown, NH, 03873
Cell 603-490-1211
jhoyt85001@aol.com
Updated: 01-12-2016
OBJECTIVE: Test Engineer (R&D and Production)
(Elect./Optics/Mechanical/Thermal/Materials Etc.)
STATUS: Currently Employed with GSI Corp. in Bedford Ma.
Medical Thermal Printers Division
Position: Device Verification Test Engineer
Summary:
• Experience in Electronics/Optics/Mechanical & Thermal technologies.
• Environmental Testing: Temp/Humidity, ESD, Shock/Vibration, Altitude,
EMI, EMC and EFT: Testing to IEC 61000 Standards.
• Equipment knowledge/experience: O_Scopes, Prog PS, DVM’s, PC’s etc.
• Assembly and Testing experience with System and Sub Level components
• Designing small test fixtures/adapters and test ckts for in-house testing
• Expert in soldering/extraction, Through Hole, SMT fine pitch, White wire
changes (lead/ lead free).
• Parts ordering, Part substitution, BOM updating
• Microsoft Office Word, Excel, PDF’s, Record keeping, Inventory, Final
Reports
• Equipment Maintenance, Purchasing, Renting, Calibration/Cal CERTS
• Lab Organization, Ordering tools, setting up bench work areas/ESD mats
• Maintaining CERTS, RoHS, China RoHS and REACH.
EDUCATION: Merrimack College and In-house courses
Courses acquired include:
Digital Integrated Circuits HPVEE
A-C Power Systems Analog Circuits
Digital Signal Processing Modern Photonics
Sonet Mentagraphics
System Grounding Techniques ESD awareness/Certification
ISO 9001 Awareness/Cert. OSHA Training
2. EXPERIENCE: Test Technician Nov 2004 – Nov 2005
Continuum Photonics Manning Rd Billerica Ma. 01821
Assembled/Terminated Optical Fibers
Tested 64 Port Optical Switch (New Technology)
Test Technician, August 2002 – Oct 2004
Advanced Thermal Solutions 27 Access rd, Norwood Ma, 02062
• Ordered Parts/Assembled and Tested Thermal Test Equipment
Lab Technician, March 1980 – June 2002
Lucent Technologies 1600 Osgood St. No. Andover Ma. 01845
• Supported Transmission Division, developing and testing proto-types and
final production circuit packs/systems.
• Tested new products for ISO 9001 compliance.
• Provided extensive Environmental Testing at both System and Board levels.
• Knowledge of Environmental Test Chambers (Tenny, Espec, Thermotron
2800 programmer etc.)
• Experience in Test Automation using National Inst. GPIB
hardware/Software.
• Experience in PC-System handshaking protocols
• Very strong component level skills: Soldering/De-soldering TH, SMT, White
Wire repair, Track repair. Thermal Analysis, Selecting alternate parts for
substitution, Board Parts ordering.
• Strong Optics Background: Fiber End Termination, repairing (splicing),
Long and Short Wave Parameter testing. Ribbon splicing. Expert using
Ericsson Splicing machines. Fiber Management.
• Some System Board Monitoring and Impedance adapter design.
• Test Equipment experience: Configured and Operated Test Bays containing
DUT’s, BERTS, Oscope. Opt Lasers, Spect. Analyz, Opt. Attn., Opt Pwr
Meter. Opt. Switch, Opt Splitters, Ret. Loss Meter, Polarization Cntrl.
