2. How a nitro glow plug works
One of the most important parts of a radio controlled Nitro
vehicle is the glow plug. It is used to start the engine of your RC
vehicle by sparking the transmitter and allow it to drive and run
smoothly from the receiver’s signal.
Equipping yourself with sufficient knowledge about glow plugs for
your nitro-powered RC cars, helicopters or boats can help you find
the right plug for your engine and make a huge difference in its
overall performance.
http://www.rcmodelswiz.co.uk
3. How a nitro glow plug works
Nitro engine, sometimes called gas engine or glow engine, for RC
models such as cars, helicopters, or boats runs on a
special mix of fuel that contains nitromethane, methanol and
oil. To run, it is ignited by a glow plug that makes it start and
provides it with a continuous heat and keeps the glow engine
running.
http://www.rcmodelswiz.co.uk
4. What to consider when buying
•
•
•
•
•
engine type
fuel mix
nitro percentage
temperature in your area
(and other factors)
Keep a range of glow plugs with you. It helps you fine-tune your engine
under all conditions and enjoy maximum performance.
http://www.rcmodelswiz.co.uk
5. What to consider when buying
Turbo vs. Standard
• A turbo glow plug is a perfect choice for a turbo RC vehicle engine.
However, you can’t use this type of glow plug in a standard engine.
Standard glow plugs are available for that.
Hot vs. Cold
• Knowing how and when to apply a hot plug or a cold plug
is also very crucial. Generally, cold plugs produce more power and even
improve overall performance of your RC engine when it runs hot. But it
may also idle more roughly and can be harder to fine-tune. Hot plugs, on
the other hand, provide better idle and speed than cold plugs.
http://www.rcmodelswiz.co.uk
6. More tips on glow plugs
•
•
•
•
•
•
•
•
•
Safeguard your RC nitro engine by buying quality glow plugs only.
Don’t touch the filament as it breaks easily.
Always store your glow plugs in a cool dry place.
Follow the proper procedures when breaking in your engine to avoid ruining your glow
plug.
Fine-tune your engine properly.
Don’t use too much force when tightening your glow plug.
Watch out for nitro detonation which means the engine needs more fine-tuning
or you’re using the wrong plug.
Always use the right glow starter
Ask advice from experienced RC hobbyists.
http://www.rcmodelswiz.co.uk
7. Learn more on RCModelsWiz
Find out more about Nitro RC Models, Electric RC Models, and Brushless RC
Models. Browse our wide array of affordable RC vehicles. If you have
questions, don’t hesitate to give us a hoot! Visit us at:
http://www.rcmodelswiz.co.uk