With production in the Permian increasing by 93,000 barrels a day year on year and accounting for 68% of overall production in Texas, the basin is without doubt re-establishing itself as one of the most prolific areas within North America for oil & gas exploration. While high liquid rich reserves, horizontal drilling and completions techniques have played a key part in this success, the continued high ultimate recoveries being seen in the basin by and large are driven by the selection and execution of the correct artificial lift and production optimization techniques. OPTIMIZING ARTIFICIAL LIFT AND PRODUCTION TECHNIQUES IN HORIZONTAL WELLS Billions of dollars are spent yearly on artificial lift technologies and tackling obstructive scale and deposition within the wellbore, so the successful application of chemical treatment programs and mitigation of scale, ashphaltene, paraffin and corrosion has become paramount to reducing well failures within the field and reducing costly workover rates. We are therefore very pleased to announce the Permian Artificial Lift & Production Optimization Congress 2014 held on the 26th and 27th of March at The Westin Galleria Houston, Texas ; the first congress designed specifically for production professionals in the Permian. The congress will focus heavily on the assessment and application of artificial lift optimization, also examining tried and tested chemical treatment programs as well as hearing case studies from leading E&P companies on how to optimize gas separation technologies, sand management and saltwater disposal. DAY 1: ARTIFICIAL LIFT AND CHEMICAL TREATMENTS Day one will focus on identification and application of the correct individual artificial lift technologies for different formations including rod pumps, gas lift, and ESP and jet pumps. Optimal chemical treatment methodologies to handle H2S will then be investigated based on case studies showing how operators have successfully managed paraffin, scale and corrosion to minimize well failures. Best practices for gas separation downhole will also be examined. DAY 2: SAND MANAGEMENT, AUTOMATION, EOR, GAS HANDLING AND WATER MANAGEMENT Day two will start with a presentation examining time and cost-effective intervention practices to minimize downtime, reduce workover rates and maximize return on capital. Speakers will then go on to deliver presentations on sand management, water and CO2 flooding and ensuring electricity supply is available for production as well as examining the effectiveness of automation software for monitoring wells and reducing failures. Optimum methods for well spacing, gas and water handling will also be discussed. For more information please visit: http://www.permian-production-2014.com/

1. The F ir s t C o n g r e s s D e si g n e d Speci f i cal l y F o r
Pr od u ction P r o f e ss i o n a l s I n T h e P erm i an Bas i n
SAVE
$400
Register By Friday
January 31, 2014
March 26-27, 2014 | Houston | Texas
Increasing The Efficiency Of
Artificial Lift Design, Chemical
Treatment Programs And Gas
Separation In Permian Basin Plays
To Extend Run Life, Minimize Well Failures And Drive
Down Workover Costs In Horizontal Wells
Key Issues To Be Discussed Include:
• ARTIFICIAL LIFT SELECTION AND OPTIMIZATION: Comparing rod pumps,
ESPs, gas lift, jet pumps to determine which yields the highest recovery with
the lowest failure rate in different areas of the Permian
• CHEMICAL TREATMENTS: Investigating the most cost-effective treatments for
asphaltene, scale, paraffin, H2S and corrosion to reduce chemical failures in
Hear From Leading EP Permian Basin
Production Experts, Including:
Alan Barksdale
CEO
Red Mountain Resources
Rick Lester
CEO
Opal Resources
Tommy Folsom
EVP Director Of Exploration Production
Permian wells
Red Mountain Resources
• GAS HANDLING: Examining optimal gas separation techniques downhole
and gas gathering solutions to identify cost-effective methods for handling
unwanted volumes of gas in the Permian
• CONFORMANCE: Evaluating key strategies for ensuring accurate zonal injection
to isolate shut off to excess water and gas and avoid shutting off oil
• WATER CO2 FLOODING: Designing optimal water and CO2 flooding
strategies to optimize reservoir draw down
• OPTIMIZING WORKOVER RATES: Examining time and cost-effective
intervention practices to minimize downtime, reduce workover rates and
maximize the return on every Permian well
Stephen Lindsey
Senior Director - Government Community
Affairs
Quicksilver Resources
Stan Cullick
Director Corporate Technology
LINN Energy
John Allred
VP Production Completions
Opal Resources
Ben Bloys
Manager - Los Alamos Technology
Alliance
Chevron
David Smith
Senior Fellow - Conformance Advisor
ConocoPhillips
Greg Wilkes
Organized By:
Manager Of Permian Basin Operations
M Follow us @UnconventOilGas #Permian_P14
Broad Oak Energy II
www.permian-production-2014.com

2. SAVE
$400
With production in the Permian increasing
by 93,000 barrels a day year on year and
accounting for 68% of overall production
in Texas, the basin is without doubt reestablishing itself as one of the most
prolific areas within North America for
oil and gas exploration. High liquids-rich
reserves, horizontal drilling and completions
techniques have played a key part in this
success, the continued high ultimate
recoveries being seen in the basin by
and large are driven by the selection and
execution of the correct artificial lift and
production optimization techniques.
OPTIMIZING ARTIFICIAL LIFT
PRODUCTION TECHNIQUES IN
HORIZONTAL WELLS
Billions of dollars are spent yearly on
artificial lift technologies and tackling
obstructive scale and deposition within
the wellbore, so the successful application
of chemical treatment programs and
mitigation of scale, ashphaltene, paraffin
and corrosion has become paramount to
reducing well failures within the field and
reducing costly workover rates.
We are therefore very pleased to announce
the Permian Artificial Lift Production
Optimization 2014; the first congress
designed specifically for production
professionals in the Permian. The
congress will focus heavily on the
assessment and optimal application of
artificial lift optimization, examining tried
and tested chemical treatment programs as
well as hearing case studies from leading
EP companies on how to optimize gas
separation technologies, gas handling and
saltwater disposal.
DAY 1: ARTIFICIAL LIFT CHEMICAL
TREATMENTS
Day one will focus on identification and
application of the correct individual artificial
lift technologies for different formations
including rod pumps, gas lift, ESP and
Register By Friday
January 31, 2014
jet pumps. Optimal chemical treatment
methodologies to handle H2S will then
be investigated based on case studies
showing how operators have successfully
managed paraffin, scale and corrosion
to minimize well failures. Optimal techniques
for gas separation downhole will also be
examined.
DAY 2: AUTOMATION, CONFORMANCE,
GAS HANDLING WATER MANAGEMENT
Day two will start with a presentation
examining time and cost-effective
intervention practices to minimize
downtime, reduce workover rates and
maximize return on capital. Speakers will
then go on to deliver presentations on
conformance and ensuring electricity
supply is available for production as
well as examining the effectiveness of
automation software for monitoring wells
and reducing failures. Optimum methods for
well spacing, gas and water handling will
also be discussed.
Sponsorship And Exhibition Opportunities Available At The Congress
Need to generate new sales leads, launch a new product, engage key decision makers, build new future business relationships
in key markets, or simply educate the industry about a new product? Then you need to exhibit at the Permian Artificial Lift
Production Optimization 2014. Our busy exhibit area is an integral part of the congress and is of genuine practical value
to delegates, who are looking for new solutions and technologies. Exhibiting at the congress will help you position yourself as a
market leader and centre of excellence to the key decision makers in the industry.
For further information, please contact us at: info@american-business-conferences.com or + (1) 800 721 3915
Venue Information:
The Congress Will Be Held At:
The Westin Galleria Houston
Woodway Room Fourth Floor
5060 West Alabama
Houston Texas 77056
Tel: (713) 960-8100
Web: Please click to view the venue website
www.permian-production-2014.com (1) 800 721 3915 info@american-business-conferences.com

3. Day 1
Wednesday March 26, 2014
8.30 Chair’s Opening Remarks
Alan Barksdale, CEO, Red Mountain Resources
KEYNOTE ADDRESS: REDUCING FAILURE RATES
8.40 Optimizing Artificial Lift And Chemical Programs To
Reduce Failure Rates And Minimize Costly Workovers
• Evaluating strategies for optimizing artificial lift selection,
sizing and design to ensure longevity of equipment and
continued production
• Determining the most effective method of producing from
deviated wellbores to avoid well failures
• Monitoring gas locking and gas breakouts to reduce
workover rate
• Minimizing pressure drop in flowlines to separators to
reduce failures due to friction or changes in pipe diameter
• Preventing liquid loading to prolong the life cycle of the well
Tommy Folsom, Executive Vice President Director Of EP, Red
Mountain Resources
9.10 Question Answer Session
ARTIFICIAL LIFT SELECTION AND OPTIMIZATION
OPTIMIZING ARTIFICIAL LIFTS RELATIVE TO THE WELL TO
REDUCE FAILURE RATE AND INCREASE WELL LIFE
PANEL DISCUSSION: ARTIFICIAL LIFT SELECTION
9.20 Correlating Artificial Lift Selection To Well
Performance: Optimizing Pump Design Based On
Reservoir Type, Run Time, Failure Rate And Cost
• Marrying the range of the pump and the turndown
capability with the expected productivity of the well to
maximize well life
• Understanding the criteria used to vet different artificial lift
mechanisms and determine the optimal selection relative
to a particular well
• Assessing the IP rates and decline curves to determine how
to adapt pump designs throughout the lifecycle of the well
• Examining how to design a pump to accommodate
for high GORs and minimize primary failures due to
compression or gas locking
Greg Wilkes, Permian Manager, Broad Oak Energy II
Jason Vining, Operations Engineer, Legend Natural Gas
Youness El Fadili, Production Engineer, Oxy
9.50 Morning Refreshments In Exhibition Showcase Area
POOR BOY GAS LIFT
10.20 Defining The Minimal Injection Rates Required
For An Effective Gas Lift To Optimize MCF Per Barrel In
The Permian
• Assessing facilities upgrades, changes in surface
equipment, well heads and flowlines necessary to operate
an efficient gas lift system
• Identifying common operational issues with gas lift to
determine the optimum methods for troubleshooting once
failure has occurred
• Examining the type of belt and run life of a gas lift application
to evaluate its viability as an alternative to rod pumps
• Establishing the optimum injection rate while maintaining
and prolonging compressor reliability to effectively lift from
the toe of the well
• Understanding whether it is more beneficial to run gas
lifts on higher or lower producing wells
Youness El Fadili, Production Engineer, Oxy
10.50 Question Answer Session
ESP
11.00 Examining The Use Of ESP Technology During A
Drilling Development Program To Determine Optimum
Drawdown In A High Water Cut Formation
• Investigating how the wellbore can be optimized to allow
proper artificial lift installation
• Identifying an ESP design able to handle high volumes of
water and oil and gas
• Evaluating ESP performance to optimize artificial lift in a
proactive manner
• Examining the various setting depths to optimize
drawdown
• Optimizing production time by proactively planning
ARTIFICIAL LIFT AND CHEMICAL TREATMENTS
Day one will identify the correct selection and application of individual artificial lift technologies for different formations and
investigate ideal chemical treatment methodologies to handle H2S, paraffin, scale and corrosion. It will also determine
optimal techniques for gas separation downhole.
GAS LIFT VS. ESP
11.40 Comparing The Economics And Recoveries Of
ESPs Vs. Gas Lift On Horizontal Bone Springs Wells
In Eddy County, NM, And Analyzing The Optimum
Drawdown With ESPs To Maximize Oil Deliverability
CHEMICAL INJECTION
• Analyzing well and LOE data to quantify the economic
and seats or sight glass just pulsed chemical injection via
solenoid to eliminate the need for chemical pumps and
treater trucks
• Providing integrated flush from flowline and eliminating
outsourced commingled water transfers through a closed
loop system
• Customizing chemical injection and flush to each well’s
individual requirements to optimize performance,
minimize maintenance and lower total lifecycle costs
• Preventing chemical fumes from leaving the container to
eliminate moisture intrusion and minimize environmental
impact
• Examining the efficiency of instantaneous satellite feedback
of the treating program to enhance communication and
identify failures
• Using the system telemetry to increase dependability of
remote or critical applications
gains of ESPs versus gas lift
• Examining rate/cum data and total well performance to
find the effects on recoveries of ESP and gas lift wells
• Using rate/time and bottomhole flowing pressure data to
determine the optimum drawdown to minimizer water cut
• Looking at the operational pros/cons of ESP and gas lift
wells in relation to the reservoir and surface conditions
Jason Vining, Operations Engineer, Legend Natural Gas
12.10 Question Answer Session
12.20 Lunch In Exhibition Showcase Area
JET PUMP
1.20 Discussing How An Operator Is Varying Material
Selection, Design And Applications Of Jet Pumps Across
Different Wells To Determine Impact On Production
• Examining new technologies and materials required to get
jet pumps around the curve and into the lateral
• Evaluating the success different operators have had with
various depths in the Permian to identify to optimum
depth for jet pump applications
• Optimum sizing and selection based on reservoir type to
optimize production performance
• Assessing if increased depth and tolerance to high
volumes of gas and solids justifies the expense
Greg Wilkes, Manager Permian Basin Operations, Broad Oak Energy II
ROD PUMP
2.00 Optimizing Rod Pump Design, Configuration, Depth
And Sizing To Minimize Gas Locking And Rod And
Tubing Wear When Pumping A Horizontal In The Permian
• Identifying optimum sizing, stroke length, depth and angle
within the lateral to maximize production capacity
• Reducing pump failures and treating rod and tubing wear
to minimize operational costs
• Using modeling programs to design rod string bore in
deviated wellbores
• Examining methods of handling gas with rod pumps in the
Permian to avoid gas locking
• Determining the optimal rod configuration: effective
grades, coupling types and methods for guiding rods in
accordance with the deviation
• Examining pump cards and determining the correct
efficiency to run them at to extend run life of the rod pump
• Optimizing pump placement: between top vs. bottom of
perfs - weighing up a reduction in hydrostatic pressure vs.
sand production
Greg Wilkes, Manager Permian Basin Operations, Broad Oak Energy II
2.20 Question Answer Session
CHEMICAL TREATMENTS
IDENTIFYING THE MOST COST-EFFECTIVE TREATMENTS
FOR SCALE, PARAFFIN, H2S AND CORROSION TO REDUCE
CHEMICAL FAILURES IN PERMIAN WELLS
CHEMICAL EFFICIENCY: STRATEGIC OVERVIEW
2.30 Increasing Margins And Efficiency: Turning Leading
Edge Practices And Technology Into Economic Value
• Balancing production costs with recovery factors to ensure
return on investment
• Identifying the optimum chemical program to minimize
downtime
• Capital allocation: examining the key criteria used to
determine the best capital allocation
• Determining the point of diminishing returns:
understanding the point at which additional expenditure
no longer justifies cost
• Defining expectations: establishing base lines and key
parameters to measure performance
3.40 Understanding The Benefits Of Using Pressurized
Chemical Injection Systems To Optimize Chemical
Injection And Improve Well Performance
• Examining how a pressurized system requires no balls
John Allred, VP Production Completions, Opal Resources
Bobby Ayres, Chemical Advisor, Opal Resources
Greg Darby, Chemical Advisor, Opal Resources
H2S, PARAFFIN, SCALE: TREATMENT CASE STUDY
4.10 Outlining Key Preventative Chemical Programs
To Remediate H2S And Paraffin To Prevent Corrosive
Damages To The Well
• Examining the results from using pressurized chemical
injections in Permian wells in combating paraffin and H2S
to determine their effectiveness
• Comparing gas treating, continuous injection, batch
and truck treating to pressurized chemical injection to
determine the most successful application
• Examining techniques to successfully inject chemicals in
a flowing well
• Identifying optimal scale inhibitors to ensure functionality
of artificial lift systems
• Combating challenges of high fluid levels to allow for the
application of solvents where needed downhole
• Identifying the most effective methods for removing sulfur
without spending huge amounts of capital on processing
facilities
John Allred, VP Production Completions, Opal Resources
Bobby Ayres, Chemical Advisor, Opal Resources
Greg Darby, Chemical Advisor, Opal Resources
4.40 Question Answer Session
GAS SEPARATION DOWNHOLE
EXPLORING OPTIMUM OIL AND GAS SEPARATION
TECHNOLOGIES TO REDUCE DAMAGE TO EQUIPMENT
DOWNHOLE
GAS SEPARATION DOWNHOLE
4.50 Examining Operational Strategies For Separating
Gas Downhole To Prevent Gas Locking And Damage To
Downhole Equipment
• Assessing different gas separation technologies and
tools being used to prevent gas locking and reduce
maintenance costs
• Evaluating different gas separators and their angle and
placement in the well to determine optimal selection for
varying GORs
• Determining the optimum angle and placement of gas
separators in the well to handle high GOR wells
• Examining downhole tools including gas separators,
pump and tubing string configurations to manage high
GOR wells
5.20 Question Answer Session
Rick Lester, CEO, Opal Resources
5.30 Chair’s Closing Remarks
Jason Edwards, Operations Engineering Advisor, Forge Energy
3.00 Question Answer Session
11.30 Question Answer Session
3.10 Afternoon Refreshments In Exhibition Showcase Area
5.40 - 6.40 Networking Drinks Reception In Exhibition
Showcase Area
artificial lift methods for the life of the well
www.permian-production-2014.com (1) 800 721 3915 info@american-business-conferences.com

4. Day 2
Thursday March 27, 2014
8.30 Chair’s Opening Remarks
Alan Barksdale, CEO, Red Mountain Resources
KEYNOTE PANEL: OPTIMIZING WORKOVER RATES
8.40 Examining Time And Cost-Effective Intervention
Practices To Minimize Downtime, Reduce Workover
Rates And Maximize Return On Investment
• Comparing the effectiveness of jointed pipe vs. coil tubing
to determine the most cost-effective methology for
cleaning the well
• Examining the techniques an operator is using to
optimize time taken to change pumps, fix rods and pull
tubing on a well
• Balancing engineering success with economic failure to
ensure that workovers are always within budget
• Evaluating production gained from workover against costs
to determine the point where well intervention cannot be
economically justified
John Allred, VP Production Completions, Opal Resources
9.10 Question Answer Session
AUTOMATION
DETERMINING THE EFFECTIVENESS OF AUTOMATION
SOFTWARES FOR FIELD SURVEILLANCE AND
DIAGNOSING OPERATIONAL ISSUES
SURVEILLANCE AND AUTOMATION
9.20 Utilizing Pump Surveillance Technology And
Automation Systems To Monitor Wells Remotely And
Decrease Failure Rates
• Examining the impact of automation and surveillance
systems on failure rates and cost to determine if it is
worth the investment
• Demonstrating a case study where utilizing latest
automation software has led to pumping wells off more
effectively
• Analyzing data surveillance and pattern surveillance to
determine if a well is underperforming
• Understanding pump unit surveillance - fluid levels and
effective reading of pump cards to provide optimum data
systems
• Exploring benefits of connecting producer with the
injector to monitor fluid patterns and decrease risk of
zonal migration
Stan Cullick, Director Corporate Technology, LINN Energy
9.50 Question Answer Session
10.00 Morning Refreshments In Exhibition Showcase Area
RESERVOIR MANAGEMENT AND WELL SPACING
ANALYZING THE ABILITY OF NEW RESERVOIR
TECHNOLOGIES AND OPTIMUM WELL SPACING TO
INCREASE PRODUCTION AND ENHANCE RECOVERY
RESERVOIR MANAGEMENT TECHNOLOGIES
10.30 Using Production Results Seen From Three New
Reservoir Technologies To Understand Their Ability To
Enhance Daily Production And Ultimate Recovery
• Examining how a new oil/water multiphase flow meter
provides accurate, cost-effective real-time data on liquids
production from every well
• Evaluating the ability of wireless, unpowered data systems
to give real-time downhole pressure and temperature data
• Exploring inexpensive wireless systems to determine their
effectiveness in giving real-time liquid level data from any
well to protect pumps, maximise flow rate and provide
pressure build-up data
Ben Bloys, Manager - Los Alamos Technology Alliance, Chevron
Corporation
11.00 Question Answer Session
WELL SPACING
11.10 Correlating Well Spacing To Production Rate
To Identify The Optimal Frac Radius To Prevent Well
Interference And Offsetting Wells
• Examining two different well spacing types to
understand the impact on the drainage radius being
seen by associated fracs
• Understanding the impacts a certain type of well
spacing can have on an individual wells frac radius and
initial production
AUTOMATION, EOR, GAS HANDLING AND WATER MANAGEMENT
Day two will evaluate strategies for optimizing workover rates, EOR and ensuring electricity supply as well as examining
the effectiveness of automation softwares for monitoring wells and reducing failures. Optimum methods for well spacing,
gas and water handling will also be discussed.
• Outlining the best practice of wells per pad to compare the
effect on wellheads and tubing pressure
• Learning the parameters and criteria that are used
to determine well spacing based on the geological
characteristics in place
11.40 Question Answer Session
11.50 Lunch In Exhibition Showcase Area
EOR
ASSESSING STRATEGIES TO ENSURE ACCURATE ZONAL
INJECTION
CONFORMANCE
12.50 Evaluating Key Strategies For Ensuring Accurate
Zonal Injection To Isolate Shut Off To Excess Water And
Gas And Avoid Shutting Off Oil
• Comparing results from expandable casing, gel polymers
and cement squeezers to determine improvement of
conformance in thePermian
• Examining how to prevent losing injection in a situation of
high streaks and high channel flows from one injector to
producer
• Examining the regularity of treatment required to ensure
optimum results
• Identifying optimum concentrations of polymer, sizes,
volumes and mixtures of cement slurries that are being
pumped
• Examining the integrity of installing an expandable liner to
understand if it is corrosion resistant
David Smith, Sr. Fellow - Conformance Engineering Advisor,
ConocoPhillips
1.20 Question Answer Session
POWER
INVESTIGATING SOLUTIONS TO POWER SUPPLY
CONSTRAINTS TO FACILITATE CONTINUED PRODUCTION
POWER AVAILABILITY
1.30 Evaluating How Permian Operators Are Obtaining
Sufficient Power To Ensure Sustained Artificial Lift
Applications And Continued Production
• Evaluating what operators are doing to gain access to
UTILIZING GAS
3.20 Identifying Cost-Effective Methods Of Re-Using
Surplus Gas In Future Operations To Ensure The
Commerciality Of Natural Gas Production
• Examining methods to utilize surplus gas for re-injection
to maintain bottom hole pressure
• Exploring the potential processing gas for self power gas
generation to alleviate power constraints
• Discussing the economic saving that would be made
through powering rigs through natural gas to determine
the return on capital investment
• Learning how to maximize volumes of natural gas
gathered to enable savings and maximize overall profits
Steven Ilkay, Oil Gas Advisor, UTEP - CREIE
3.50 Question Answer Session
SALTWATER HANDLING
EXAMINING METHODS FOR THE DISPOSAL AND
UTILIZATION OF SALTWATER TO MAXIMIZE PRODUCTIVITY
SALTWATER DISPOSAL
4.00 Examining Efficient Methodologies For Handling
Saltwater To Minimize Disposal Costs While Remaining
Compliant With Regulations
• Justifying
optimum saltwater injection ratio in regards
to pressure, depth, temperature and the rock being
disposed into
• Understanding how operators are cost-effectively handling
wastewater disposal in large volumes
• Identifying optimum zones for injection and most
effective injection intervals for maximum water
disposition capacities
• Distinguishing methods of treating water and treatment
levels required to enhance potential for re-use in future
fracs
• Providing a cost-benefit analysis of disposal vs.
re-injection to determine the optimal disposal method
in the Permian
Stephen Lindsey, Senior Director - Government Community Affairs,
Quicksilver Resources
4.30 Question Answer Session
4.40 Chair’s Closing Remarks And End Of Conference
power supplies to avoid reliance on generators
• Examining how an operator is planning for sub stations
and bigger lines to facilitate increased production
• Identifying generators that can put 10mb of power through
generation to determine the most suitable for long-term
production
• Exploring natural or produced gas powered generators to
ascertain the effectiveness of this power source relative
to cost
John Bick, Power Advisor, Linn Energy
2.00 Question Answer Session
GAS HANDLING
IDENTIFYING COST-EFFECTIVE METHODS FOR
GATHERING AND UTILIZING GAS TO PREVENT FLARING
GAS GATHERING FACILITIES
2.10 Evaluating Cost-Effective Systems In Place To
Enable The Gathering And Processing Of Gas To
Reduce Flaring In The Permian Basin
• Identifying the available capacity on current gas pipeline
projects to clarify gas takeaway options
• Identifying new pipelines projects and compression plants
that are coming online to determine the capacity of these
to handle volumes of gas being produced
• Understanding how an operator has cost-effectively
gathered their gas to ensure gas reaches necessary
processing facilities
• Evaluating the costs of installing on-site gas gathering
systems against the value lost from flaring gas to
determine if the investment costs are justified
• Discussing future strategies for ensuring that natural gas
production can be capitalized upon
“The conference puts
into perspective what
the industry leaders are
doing in the Basin”
ConocoPhillips
“Time well spent...Good
takeaways to be applied
in daily work activities”
Broad Oak Energy
Doug Coleman, VP New Ventures, Prism Midstream
2.40 Question Answer Session
2.50 Afternoon Refreshments In Exhibition Showcase Area
www.permian-production-2014.com (1) 800 721 3915 info@american-business-conferences.com

5. Yes P
I would like to register the delegate(s) below for the 2 day conference
Permian Artificial Lift Production Optimization 2014
Details PLEASE USE CAPITALS - PHOTOCOPY FOR MULTIPLE DELEGATES
Delegate 1
Delegate 2
* Mr
* Mr
* Dr * Miss * Ms * Mrs * Other:
* Dr * Miss * Ms * Mrs * Other:
Name
Name
Position
Position
Organization
Organization
Email
Email
Telephone
Telephone
SAVE UP TO 20% ON
GROUP DISCOUNTS
Address For Invoice Purposes
Zip/Postal Code
Country
Call for rates: (1) 800 721 3915
Delegate Rates GUESTS ARE RESPONSIBLE FOR THEIR OWN TRAVEL AND ACCOMMODATION ARRANGEMENTS
Super Early Booking Discount
Early Booking Discount
Standard Rate
Book And Pay By Friday January 31, 2014
Book And Pay By Friday February 14, 2014
From February 15, 2014
* $1399 USD SAVE $400
* $1599 USD SAVE $200
2 Day Conference Pass
Add Audio Video Materials
* $1799 USD
* $399 USD
Payment PLEASE TICK APPROPRIATE BOXES AND COMPLETE DETAILS
Payment must be received in full prior to the event.
* 1. CREDIT CARD
Option
Please charge my
* VISA
* AMERICAN EXPRESS
Amount $ USD
Expiry date
Card number
Security Code / CVV (required)
Name on card
* MASTERCARD
Signature of card holder
* 2. INVOICE
Option
An invoice containing payment instructions will be sent electronically upon receipt of the completed registration form.
How To Finalize Your Registration
Terms Conditions
The conference is being organized by American Business
Conferences, a division of London Business Conferences
Ltd, a limited liability company formed under English
company law and registered in the UK no. 5090859.
Cancellations received 30 days prior to the start of the event
will be eligible for a refund less $150 administration fee, after
this point no refund will be given. Cancellations must be made
in writing, if you are unable to attend you may nominate a
colleague to attend in your place at no additional cost.
Receipt of this registration form, inclusive or exclusive
of payment constitutes formal agreement to attend and
acceptance of the terms and conditions stated.
All outstanding fees must be paid within our standard
payment period of 7 days. Any outstanding invoices will
remain valid should cancellation of attendance be received
outside of the aforementioned cancellation period.
*If you are claiming the early booking discount this may
not be used in conjunction with other discounts advertised
elsewhere. All discount codes and offers must be claimed at
the time of registration.
American Business Conferences reserves the right to alter
or cancel the speakers or program.
American Business Conferences reserve the right to refuse
admission.
We would like to keep you informed of other American
Business Conferences products and services. This will be
carried out in accordance with the Data Protection Act.
Please write to the Head of Marketing, American Business
Conferences at the address below if you specifically do not
want to receive this information.
American Business Conferences. City Center One. 800
Town Country Blvd. Suite 300. Houston. Texas. 77024
American Business Conferences will not accept liability for
any individual transport delays and in such circumstances
the normal cancellation restrictions apply.
American Business Conferences is a Division of London
Business Conferences Limited, Registered in England No.
5090859 EIN. no: 98-0514924
Now that your details are completed please send your registration form to
our Customer Service Team using one of the following options:
Option 1. Email: info@american-business-conferences.com
Option 2. Fax: (1) 800 714 1359
Enquiries And More Information
Should you have any enquiries or if you would like to request more
information please contact our friendly Customer Service Team on
(1) 800 721 3915 or visit the conference website at:
www.permian-production-2014.com
www.permian-production-2014.com (1) 800 721 3915 info@american-business-conferences.com