4. I N N OVAT I V E TECHNOLOGIES
Tyco Electronics Ltd. is a leading global provider of engineered electronic components, network
solutions and undersea telecommunication systems. We design, manufacture and market
products for customers in industries from automotive, appliance and aerospace and defense to
telecommunications, computers and consumer electronics. The automotive division follows
the globalization goals of our customers, speeds up the integration of new technologies and
enables our customers access to our vast product portfolio and services.
TERMINALS & CONNECTORS
Tyco Electronics offers a broad range of high quality terminals and connectors.
Our electrical/electronic interconnection products and solutions are used to electrically
and mechanically join wires and cables, printed circuit boards, integrated circuit
packages and batteries. Tyco Electronics expanding capabilities include new copper
and fiber-optic connectors, wires, cables/cable management systems that are designed
to meet automotive industry demands. Our brands encompass the broadest range of
connectors in the world, including high-density, high-speed designs for leading-edge
communications equipment.
SENSORS
Contact-less measuring eliminates interference effects, wear and tear, and provides
increased reliability. Tyco Electronics, one of the largest technology providers for the
automobile industry, offers contact-less sensors for a variety of applications.
As sensor manufacturer and processing partner, Tyco Electronics also provides
project planning support for new sensor applications, assistance in the selection of
the appropriate sensor technology for the respective application, and assistance with
defining the corresponding mechanical, electrical and magnetic interface.
Tyco Electronics has a broad electro-mechanical portfolio that includes robust housing technologies,
connector systems, and temperature stable designs based on foil and cable networks. This combi-
nation of technologies and experience ensures that reliable and cost effective sensor solutions are
available for all application types.
II
5. C A B L E A S S E M B LY S Y S T E M S
Tyco Electronics is your partner for special cable assemblies.
We offer research and development capabilities, prototyping, samples as well as
manufacturing facilities for special cable assemblies. This includes overmold
technology, semi/fully automatic manufacturing, testing equipment and appliances
for handling of high volume production.
I N D U C T I V E SYST E M S
The Automotive Division is your source for interconnection technologies for
automotive, truck and off-highway OEMs and Tier 1 suppliers. With the design
competency center in Oostkamp (Belgium), and strategic production centers in Evora
(Portugal), Bangalore (India), Shuzhou (China), Oostkamp (Belgium), and others,
Tyco Electronics’ Inductive Systems group is ready to offer you any coil module
required in the automotive industry.
The Inductive System group focus lies on the customer requirement, in order to design
to the exact demand. This is achieved by highly technical, intelligent and cost-efficient engineering.
In order to be a leader in design, Tyco Electronics’ Inductive Systems group has a vast product
portfolio, which consists out of antennas, actuators, resolvers, and integrated coil modules.
Next to that, several specific applications are designed.
M E C H AT R O N I C S
A variety of technical products are designed today by integrating mechanical
components and electronic hardware into one packaging unit thus creating true
mechatronic solutions. Mechatronic applications offer amazing and versatile potentials
related to functionality, cost, space requirements and quality. Tyco Electronics
contributes to those applications with its wide range of innovative and cost-effective
product and process technologies.
Advanced stamping, injection molding and assembly techniques are applied along with
highly selective surface plating methods.
III
6. H I G H S P E E D DATA N E T W O R K I N G
High speed data networking within the automobile is becoming more predominant.
What was till now restricted to the high end of the market utilizing system such as the
MOST network, high speed data transmission based on optical fibers, now with the
introduction of MP3 player, display screens and cameras results in the need for high
speed networking throughout all platforms.
MOST IS A TRADEMARK
A LT E R N AT I V E P O W E R S Y S T E M S
CO M P O N E N TS F O R H Y B R I D, E L E C T R I C A N D FUEL CELL TECHNOLOGY
Tyco Electronics is a leader in next-generation transportation technologies and
products for hybrid and electric vehicles. The Automotive Division is your source for
high voltage power distribution, high current contacts, high voltage connectors and
cables, high voltage relays, sensors and temperature protection devices for hybrid and
other alternative powered vehicles.
T YCO E L E C T R O N I C S
O U R C O M M I T M E N T. Y O U R A D VA N TA G E .
Tyco Electronics’ businesses operate in thousands of different areas of industry.
The products and services we deliver all have one thing in common. They are
vital to everyday living. Individuals and companies worldwide have critical needs.
And every minute of every day, we satisfy them.
IV
7. R E S T R I C T I O N O N T H E U S E O F H A Z A R D O U S S U B S TA N C E S ( R O H S )
At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end
items/components for RoHS compliance, and issued new part numbers where any change was required to
eliminate the restricted materials. Part numbers in this catalog are identified as:
RoHS Compliant
Part numbers in this catalog are RoHS Compliant, unless marked otherwise.
These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts
the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic
products sold into the EU as of 1 July 2006.
Note: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly
“Out of Scope” of the RoHS Directive such as hand tools and other non-electrical accessories.
Non-RoHS Compliant
These part numbers are identified with a “ ” symbol. These products do not comply with the material restrictions
of the European Union Directive 2002/95/EC.
5 of 6 Compliant
A “ ” symbol identifies these part numbers. These products do not fully comply with the European Union
Directive 2002/95/EC because they contain lead in solderable interfaces (they do not contain any of the other
five restricted substances above allowable limits). However, these products may be suitable for use in RoHS
applications where there is an application-based exception for lead in solders, such as the server, storage, or
networking infrastructure exemption.
Note: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and
represents our current actual knowledge based on the information provided by our suppliers. This information
is subject to change. For latest compliance status, refer to our website referenced below.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and
support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed
information. You can also submit RoHS questions and receive a response within 24 hours during a normal work
week. The Support Center also provides:
■ Cross-Reference from Non-compliant to Compliant Products
■ Ability to browse RoHS Compliant Products in our on-line catalog: RoHS
http://ecommas.tycoelectronics.com/commerce/alt/RohsAltHome.do
Customer
■ Downloadable Technical Data Customer Information Presentation
Support
■ More detailed information regarding the definitions used above
Center
So whatever your questions when it comes to RoHS, we’ve got the
answers at www.tycoelectronics.com/leadfree
V
8. “AT YO U R S E RV I C E ”
Tyco Electronics Online
The Tyco Electronics website is an innovative and
interactive source for application information,
product updates and technical solutions.
Our step-by-step software makes our website
intuitive and user-friendly to better serve you!
Please contact us at:
www.tycoelectronics.com/automotive
Internet
www.tycoelectronics.com
www.tycoelectronics.com/automotive
www.tycoelectronics.com/automotive/sensors
www.tycoelectronicsmost.com
Electronic Internet Catalog
www.tycoelectronics.com/components
www.tycoelectronics.com/automotive
www.tycoelectronics.com/automotive/sensors
www.tycoelectronicsmost.com
VI
9. “AT YO U R S E RV I C E ”
Product and Machine Literature
Tyco Electronics offers a variety of product specific
catalogs, brochures and high impact flyers to help better
serve you!
For more information on literature for Tyco Electronics’
Automotive Division, please contact your local
Tyco Electronics organization or go to
www.tycoelectronics.com/automotive
Product Information Center
(PIC)
You can rely on Tyco Electronics’ PIC Team to
provide you support for answers to your
general information or technical questions
in an efficient and effective manner.
To reach our PIC staff, please contact your
local Tyco Electronics organization.
See our Global Contacts page.
VII
10. AU TO M OT I V E D I V I S I O N
Page
Alternative Power Systems (APS)
Creating “A Green Advantage” 12-10 ✓
Introduction 12-20 ✓
2 Position HVA 280 Connector System 12-30 ✓
3 Position HVA 280 Connector System 12-40 ✓
2 Position HVA 400 Connector System 12-50 ✓
2 Position Auxiliary Power Terminal (APT) 12-60 ✓
2 Position Low Voltage (LV) 800 Connector 12-70 ✓
2 Position High Voltage (HV) 800 Connector 12-80 ✓
3 Position High Voltage (HV) 800 Connector 12-90 ✓
1 Position IPT Shielded Ring Tongue 12-10 ✓
EV 200 Contactor 12-12 ✓
LEV 100 Contactor 12-13 ✓
Power Resistor 12-14 ✓
Typical Make / Break Application 12-15 ✓
High Current Relay (HCR) 200 12-16 ✓
High Current Relay (HCR) 150 12-17 ✓
Battery Disconnect Switch (BDS)-A 12-18 ✓
High Voltage Cable Assemblies 12-19 ✓
Multi-Coil Resolver (MCR) 12-20 ✓
Clutch Position Sensor 12-21 ✓
Dual Clutch Position Sensor 12-22 ✓
Neutral Position Sensor 12-23 ✓
Brake Pedal Position Sensor 12-24 ✓
Thermal Indicator 12-25 ✓
HFT 5000 12-26 ✓
Application Tooling 12-27 ✓
Numerical Index 12-28 ✓
VIII
12. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Engineering Notes
X All specifications subject to change. Consult Tyco Electronics for latest specifications.
13. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Creating “A Green Advantage”
Tyco Electronics Ltd. is a We design, manufacture With worldwide engineering, Global Automotive Division
leading global provider of and market products for manufacturing, sales and
engineered electronic com- customers in a broad array customer service capabilities, ALTERNATIVE
ponents, network solutions, of industries including auto- Tyco Electronics’ commit- POWER SYSTEMS
specialty products and motive; data communication ment is our customers’ (APS)
undersea telecommunication systems and consumer elec- advantage.
systems, with customers in tronics; telecommunications; Tyco Electronics is a leader
more than 150 countries. aerospace, defense and in next-generation trans-
marine; medical; energy; portation technologies and
and lighting. products for hybrid and
electric vehicles. The Global
Automotive Division is your
source for high voltage power
distribution, high current
contacts, high voltage
connectors and cables,
high voltage relays, sensors
and temperature protection
devices for hybrid and other
alternative powered vehicles.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-1
14. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Introduction
High-Power Automotive
Electrical Systems
for Hybrid and Electrical
Vehicles
Alternative powered vehicles, Electrical systems on conven- Tyco Electronics offers a wide
such as hybrid electric tional vehicles are typically range of components and
vehicles (HEV’s), can reduce designed for 12 volts, with subsystems for HEV’s,
harmful pollutants and exhaust the majority of loads less than including:
emissions. Recent interest in 30 amps. In contrast, hybrid ■ High power electrical
alternative powered vehicles and electric vehicles have connectors and cables,
creates a new challenge for electrical systems with voltage
vehicle electrical systems levels between 300–800 volts ■ High power contactors
because of the need for and currents from 200–1000 for battery switching and
high power electrical system amps. High power environ- control,
technology. ments require design and ■ Circuit protection devices,
packaging solutions for power like Raychem PolySwitch™
The demand for high power
switching, circuit protection, PPTC’s,
electrical components has
electrical power distribution ■ Power Distribution Units.
accelerated due to the
and interconnection systems.
constant development of
alternative powered vehicles,
high power electrical com-
ponents for “drive by wire”
electromechanical systems
and high-power systems on
vehicles with conventional
voltage levels.
12-2 All specifications subject to change. Consult Tyco Electronics for latest specifications.
15. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
2 Position HVA 280 Connector System
2 Position HVA 280
Connector System
Application
■ High voltage accessory (HVA) /
device interconnect
Description
■ Sealed
■ Touch safe
■ 2.8 mm AMP MCP Box/
Blade Contact System
■ Wire Range: 2.0–4.0 mm2
■ Individually Shielded Cable
■ Wire-to-device
■ Internal safety interlock
■ 360° EMC shielding
■ Finger actuated
two-stage latch
■ Multiple indexes available
Performance
■ Rated Voltage:
600 V DC
■ Current Carrying Capacity:
40 A continuous @ +85 °C on Ordering Information
4.0 mm2 wire in connector
Connector No. of Product Overview
27 A continuous @ +125 °C on Type Positions Description Part Number
4.0 mm2 wire in connector
Plug Housing 1587819-x
■ Operating Temperature: HVA 280 2
Header Housing 1587831-x
–40 °C to +125 °C
■ Degree of Protection:
IP6K9K, IPX7 mated,
IP2XB unmated
■ Vibration Profile:
USCAR-2 (Body Profile)
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-3
16. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
3 Position HVA 280 Connector System
3 Position HVA 280
Connector System
Application
■ High voltage accessory (HVA) /
device interconnect
Description
■ Sealed
■ Touch Safe
■ 2.8 mm AMP MCP Box/
Blade Contact System
■ Multicore shielded cable
■ Wire Range: 2 x 2.5–4.0 mm2,
3 x 2.5–3.0 mm2
■ Wire-to-device
■ 360° EMC shielding
■ Tool actuated latch
■ Multiple indexes available
Performance
■ Rated Voltage:
600 V DC
■ Current Carrying Capacity:
30 A continuous @ +125 °C on Ordering Information
3 x 2.5 mm2 wire in connector
Connector No. of Product Overview
■ Operating Temperature: Type Positions Description Part Number
–40 °C to +125 °C
Plug Housing 1587715-x
■ Degree of Protection: HVA 280 3
IP6K9K, IPX7 mated, Header Housing 1587727-x
IP2XB unmated
■ Vibration Profile:
USCAR-2 (Body Profile)
12-4 All specifications subject to change. Consult Tyco Electronics for latest specifications.
17. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
2 Position HVA 400 Connector System
2 Position HVA 400
Connector System
Application
■ High voltage accessory (HVA) /
device interconnect
Description
■ Sealed
■ Touch safe
■ 4.0 mm pin/socket contact
system
■ Wire Range: 3.0–6.0 mm2
■ Individually shielded cable
■ Wire-to-wire
■ External safety interlock
■ 360° EMC shielding
■ Tool actuated latch
Performance
■ Rated Voltage:
600 V DC
■ Current Carrying Capacity:
33 A continuous @ +125 °C on
3.0 mm2 Wire (free in air)
■ Operating Temperature: Ordering Information
–40 °C to +125 °C
Connector No. of Product Overview
■ Degree of Protection: Type Positions Description Part Number
IP6K9K, IPX7 mated,
IP2XB unmated Plug Housing 1587517-x
HVA 400 2
■ Vibration Profile: Cap Housing 1587777-x
USCAR-2 (Body Profile)
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-5
18. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
2 Position Auxiliary Power Terminal (APT)
2 Position Auxiliary
Power Terminal (APT)
Application
■ High voltage accessory (HVA) /
device interconnect
Description
■ Auxiliary pigtail system
■ Sealed
■ Touch safe
■ Wire Range: 2.5–6.0 mm2
■ Individually shielded cable
■ Wire-to-device
■ Non-serviceable fixed device
interface
■ 360° EMC shielding
Performance
■ Rated Voltage:
600 V DC
■ Current Carrying Capacity:
30 A continuous @ +125 °C
on 4.0 mm2 Wire
■ Operating Temperature: Ordering Information
–40 °C to +125 °C
Connector No. of Product Overview
■ Degree of Protection: Type Positions Description Part Number
IP6K9K
APT 2 Kit 1587833-x
■ Vibration Profile:
USCAR-2 (on Engine)
12-6 All specifications subject to change. Consult Tyco Electronics for latest specifications.
19. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
2 Position LV 800 Connector
2 Position Low Voltage
(LV) 800 Connector
Application
■ Accessory/main interconnect
Description
■ 2 positions
■ Sealed
■ 8.0 mm socket contact system
■ Wire Range: 25.0–50.0 mm2
■ Wire-to-device
Performance
■ Rated Voltage:
12 V DC
■ Current Carrying Capacity:
210 A continuous @ +85 °C
on 50.0 mm2 wire
■ Operating Temperature:
–40 °C to +130 °C
■ Degree of Protection:
IP6K9K, IPX7 mated
Ordering Information
Connector No. of Product Overview
Type Positions Description Part Number
Plug Housing 1670564-x
LV 800 2
Pin Header 1670559-x
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-7
20. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
2 Position HV 800 Connector
2 Position High Voltage
(HV) 800 Connector
Application
■ Accessory/main interconnect
Description
■ 2 positions
■ Sealed
■ Touch safe
■ 8.0 mm socket contact system
■ Wire Range: 25.0–50.0 mm2
■ Wire-to-device
■ Full integrated interlock
■ 360° EMC shielding
Performance
■ Rated Voltage:
800 V DC
■ Current Carrying Capacity:
210 A continuous @ +85 °C
on 50.0 mm2 wire
■ Operating Temperature:
–40 °C to +130 °C
■ Degree of Protection:
IP6K9K, IPX7 mated, Ordering Information
IP2XB unmated
Connector No. of Product Overview
Type Positions Description Part Number
Plug Housing 1719822-x
HV 800 2
Pin Header 1719833-x
12-8 All specifications subject to change. Consult Tyco Electronics for latest specifications.
21. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
3 Position HV 800 Connector
3 Position High Voltage
(HV) 800 Connector
Application
■ Accessory/main interconnect
Description
■ 3 positions
■ Sealed
■ Touch safe
■ 8.0 mm socket contact system
■ Wire Range: 25.0–50.0 mm2
■ Wire-to-device
■ Full integrated interlock
■ 360° EMC shielding
Performance
■ Rated Voltage:
800 V DC
■ Current Carrying Capacity:
210 A continuous @ +85 °C
on 50.0 mm2 wire
■ Operating Temperature:
–40 °C to +130 °C
■ Degree of Protection:
IP6K9K, IPX7 mated, Ordering Information
IP2XB unmated
Connector No. of Product Overview
Type Positions Description Part Number
Plug Housing 1563425-x
HV 800 3
Pin Header 1563315-x
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-9
22. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
1 Position IPT Shielded Ring Tongue
1 Position IPT Shielded
Terminal, Screwed,
25.0–50.0 mm2
Application
■ Accessory/main interconnect
Description
■ 1 position
■ Sealed
■ Ring tongue
■ Wire Range: 25.0–50.0 mm2
■ Wire-to-device
■ 360° EMC shielding
Performance
■ Rated Voltage:
800 V DC
■ Current Carrying Capacity:
200 A continuous @ +105 °C
on 50.0 mm2 wire
■ Operating Temperature:
–40 °C to +130 °C
■ Degree of Protection:
IP6K9K, IPX7 mated
Ordering Information
Connector Wire Size Range Product Overview
Type (mm2) Description Part Number
IPT 20.0– 50.0 IPT Shielded Terminal 1991227-x
12-10 All specifications subject to change. Consult Tyco Electronics for latest specifications.
23. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
1 Position IPT Shielded Ring Tongue
1 Position IPT Shielded
Terminal, Screwed,
70.0–120.0 mm2
Application
■ Accessory/main interconnect
Description
■ 1 position
■ Sealed
■ Ring tongue
■ Wire Range: 70.0–120.0 mm2
■ Wire-to-device
■ 360° EMC shielding
Performance
■ Rated Voltage:
800 V DC
■ Current Carrying Capacity:
420 A continuous @ +105 °C
on 120.0 mm2 wire
■ Operating Temperature:
–40 °C to +130 °C
■ Degree of Protection:
IP6K9K, IPX7 mated
Ordering Information
Connector Wire Size Range Product Overview
Type (mm2) Description Part Number
IPT 70.0–120.0 IPT Shielded Terminal 1670904-x
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-11
24. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Make / Break
EV 200 Contactor
Application
■ Main relay
■ Accessory relay
■ High speed pre-charge relay
Description
■ Form X
■ Available with and
without Economizer
(see application note)
■ Hermetically sealed
Performance
■ 500 A DC continuous carry
■ 2,000 A, 320 V DC emergency
interrupt
■ 900 V DC contact maximum
■ Capacitive make switching
• 50,000 cycles,
360 amps peak
• 50 Cycles, 650 amps Peak
■ 9 to 95 V DC coil voltage
■ 1.6 watts coil power Ordering Information
Product Description Part Number
✱✱
EV200AAANA- (with Economizer) 2098190-1
EV200A1ANA-✱✱ (without Economizer) 2098372-1
12-12 All specifications subject to change. Consult Tyco Electronics for latest specifications.
25. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Make / Break
LEV 100 Contactor
Application
■ Low cost 135 A sealed
contactor
■ Side or bottom mount –
not position sensitive
■ Multiple coil options available
Application
■ Main relay
■ Accessory relay
■ High speed pre-charge relay
Description
■ SPST – no form X
■ Hermetically sealed
Performance
■ 135 A DC continuous carry
■ 200 A DC (>3 minutes carry)
■ 1000 A, 400 V DC emergency Ordering Information
Interrupt Product Description Part Number
■ 900 V DC contact maximum
LEV100A4BNG01 5-1618389-5
■ 12, 24 and 48 V DC coil voltage
■ 5.5 watts coil power
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-13
26. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Make / Break
Power Resistor
Application
■ Filter capacitor pre-charge
Description
■ Thick film isotop (shown)
■ Cement encased wirewound
■ Aluminum housed
■ Ceramic housed
Performance
■ Typical 700 joules
(360 V, 7 mF)
■ 3 charges at
5 second intervals
■ 500 V DC
■ 2000 V AC flash tested
Available up to 5000 joules
Terminals:
Faston, screw
Mounting:
Screw, clip
Ordering Information
Product Description Part Number
Power Resistor SQBW40 1879068-x
12-14 All specifications subject to change. Consult Tyco Electronics for latest specifications.
27. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Make / Break
Typical
Make / Break
Application
Pre-Charge Relay and Resistor
Motor Controller
B+
+A1 –A2
Main Relay Filter Caps
From Source
(Fuel cell, batteries, generator etc.)
–A2 +A1 To Load
B–
Vehicle Start Sequence
■ Pre-charge relay closes into resistor ■ Positive main propulsion relay closes into partially
■ Capacitors charge under current-limit conditions charged capacitors
■ Contact welds are prevented ■ In-rush current is limited due to pre-charge conditions
Capacitive Switching Test Protocols
Test Protocol 1 Test Protocol 2
Make/break life capacitive and resistive loads at 320 V DC 1), 2) Make/break life capacitive and resistive loads at 320 V DC 1), 2)
Cycles Cycles
@ 90% capacitive pre-charge (make only) see charts below 50,000 @ 90% capacitive pre-charge (make only) see charts below 50,000
@ 80% capacitive pre-charge (make only) see charts below 50 @ 70% capacitive pre-charge (make only) see charts below 50
@ 200 A make/break 2 consecutive, reverse polarity 1) 12 @ 250 A, 320 V make/break 2 consecutive, reverse polarity 1) 10
@ 2000 A break only (1700 A for auxiliary contact model 1) 1✱ @ Interrupt current maximum, 320 V break only 4✱
(1700 A for auxiliary contact model) 1)
Capacitive Make Test Curves for Pre-Charged Capacitive Make Test Curves for Pre-Charged
Motor Controller (Test Protocol 1) Motor Controller (Test Protocol 2)
80% Pre-Charge
80% Pre-Charge
Current (Amps)
Current (Amps)
90% Pre-Charge
90% Pre-Charge
Time (ms) Time (ms)
1) 2)
Resistive load includes inductance L = 25 µH. Load @ 2500 A tested @ 200 µH. Life based on projected Weibull Life with 95% Reliability.
✱) Does not meet dielectric and IR after test.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-15
28. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Carry / Break
High Current Relay
(HCR) 200
Features
■ Normally closed contact
■ Limiting continuous current
120 A @ +110 °C
Customized Versions on Request
■ Integrated components
(e.g. resistor, diode)
■ Special marking
Typical Applications
■ Energy management
■ Battery coupling
■ Start-stop
Design
■ ELV/RoHS/WEEE compliant
■ Splash-water and dust-tight;
protection class IP64 to
ISO 20653 (DIN 40050-9)
Ordering Information
■ Weight: approx. 230 g
Product Description Part Number
■ Nominal voltage: 12 V
■ Terminals HCR 200 V23230-D2001-B200 1-1414995-0
Quick connect terminals
(coil)
Screw terminals (load)
Conditions
All parametric, environmental and
endurance tests are performed
according to EIA Standard
RS-407-A at standard test con-
ditions unless otherwise noted:
23 °C ambient temperature,
20–50 % RH, 29.5 ±1.0 Hg
(998.9 ±33.9 hPa).
12-16 All specifications subject to change. Consult Tyco Electronics for latest specifications.
29. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Make / Break
High Current Relay
(HCR) 150
Application
Main relay
Accessory relay
High speed pre-charge relay
Description
Form A, X, C
Sealed
Performance
200 A DC continuous carry
300 A DC emergency interrupt
To 200 V DC contact maximum
12 V DC, 24 V DC coil voltage
3.3 watts coil power
Ordering Information
Product Description Part Number
HCR 150 V23132-A2001-A100 1416010-1
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-17
30. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Make / Break
Battery Disconnect Switch
(BDS)-A
Application
■ High current loads
(heaters, pumps)
■ Dual power network
■ Dual battery systems
■ Energy management
Description
■ Compact high current relay
for multivalent applications,
sealed, mono and bi-stable
Performance
■ 190 A DC continuous current
@85 °C
■ 40 mOhm voltage drop
at 100 A (Initial)
■ 1500 A interrupt
■ 15 ms operating time
(approx. @14 V)
■ Up to 60 V contact voltage
Ordering Information
Product Description Part Number
BDS-A V23130-C2021-A412 1-1414939-4
12-18 All specifications subject to change. Consult Tyco Electronics for latest specifications.
31. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
High Voltage Cable Assemblies
High Voltage
Cable Assemblies
High voltage cable assemblies
for connections of high voltage
systems that provide reliability
and robustness to meet the safety
requirements of the electric
vehicle market.
■ System integration of high
voltage harnesses from
Battery Power Distribution
Systems Contactor Boxes
Inverters to E-machines
■ Multi-core and individually
shielded cable capability
■ Capability to process cables
from 2.5 mm2 to 120 mm2
in conductor size
■ Design and process
competence in contact and
shield crimp technology
■ Capable of end of line
reliability testing
For ordering information
please contact your
local sales representative.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-19
32. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Position Sensors
Multi-Coil Resolver
(MCR)
Application
■ Rotary position sensor
for E-Motor
Description
■ Analog output
■ Platform product based on
speed numbers
Performance
Wide Temperature Range:
–40 °C to +130 °C
Robust for harsh environments
High rotational speed
Connection technology
delivered in package
High reliability, low number of
components
Sensing absolute position and
velocity
By connecting the MCR to an
AVD converter analog output
signals are converted to digital
position signals.
For ordering information please contact your local sales representative.
12-20 All specifications subject to change. Consult Tyco Electronics for latest specifications.
33. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Sensor Solutions for Alternative Powered Vehicles
Clutch
Position Sensor
Application
■ Alternative powertrain
solutions
Function
■ Measuring piston position
at concentric slave cylinder
Technology
■ Permanent magnetic linear
contact-less displacement
sensor (PLCD)
Product Features
■ Small design in
■ Measurement Range:
22.0 mm absolute
■ Highly temperature stable
(up to +180 °C)
■ Redundancy possible
For ordering information please contact your local sales representative.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-21
34. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Sensor Solutions for Alternative Powered Vehicles
Dual Clutch
Position Sensor
Application
■ Dual clutch transmission
for hybrid cars
Function
■ Measuring the position of
the clutch actuators
Technology
■ Permanent magnetic linear
contact-less displacement
sensor (PLCD)
Product Features
■ Two PLCD in one housing
concept
■ PWM interface
■ Small, very flat design
For ordering information please contact your local sales representative.
12-22 All specifications subject to change. Consult Tyco Electronics for latest specifications.
35. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Sensor Solutions for Alternative Powered Vehicles
Neutral
Position Sensor
Application
■ Start-stop application
(mild hybrid)
Function
■ Measuring neutral position
of the transmission
Technology
■ Active permanent magnetic
linear contact-less
displacement (PLCD) sensor
(moving magnet)
Product Features
■ Contact-less measurement
through transmission wall
■ Measurement Range:
28 mm absolute
■ Neutral position <2% over
travel, temperature, life time,
etc.
■ Optional redundancy possible
For ordering information please contact your local sales representative.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-23
36. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Sensor Solutions for Alternative Powered Vehicles
Brake Pedal
Position Sensor
Application
■ Regenerative brake
for hybrid cars
Function
■ Brake pedal position detection
Technology
■ Permanent magnetic linear
contact-less displacement
sensor (PLCD)
Product Features
■ Optional travel or rotational
measurement possible
■ PWM or analogue output
■ Optional redundancy possible
■ High linearity (<2% over travel,
temperature, life time, etc.)
■ Optional sensor location pedal
works or brake master cylinder
For ordering information please contact your local sales representative.
12-24 All specifications subject to change. Consult Tyco Electronics for latest specifications.
37. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Make / Break
Thermal Indicator
Thermal Indicator for
Over-Temperature Detection
Thermal indicator with very
steep R-T curve
“Close to digital” resistance
response
Direct input into FET of BJT
No comparator necessary
Built-in hysteresis to avoid
cycling
Different temperatures possible
from 70 °C up to 165 °C
Flexible Design:
can be located wherever the
potential heat might appear
Can be put in series to protect
several cells or places with
one controller
Tyco Electronics’s thermal They also feature a temperature Finally, the “near digital”
indicators (RTI’s) are used for hysteresis response that can resistance response allows for
over-temperature (OT) signaling. minimize signal oscillation multiple devices to be placed
They provide “silicon-like” traditionally achieved using in series on the same circuit
performance (in a passive active components. without significant dilution in
component), reduce footprint The steep resistance response system measurement accuracy.
needs and support simple and hysteresis also allow for This allows for a simple, low
distributed monitoring. a reduction in support com- cost implementation of multi-
In contrast to ceramic PTC ponents. RTI devices require point distributed monitoring.
devices, RTI devices provide only one ballasting resistor to
clear, “near digital”, OT signals directly control power FET’s and
due to a steep resistance BJT’s. Solutions using ceramic
change with temperature (~10 x PTC’s might require a resistor
resistance change per 2 °C). network and comparator to
offer similar functionality. This
reduction in support com-
ponents translates directly to
lower system cost and reduced
board area requirements.
For ordering information please contact your local sales representative.
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-25
38. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Mechanical Protection for Power Cables
HFT 5000
Description
■ Heat Shrinkable Fabric Tubing
(HFT)
■ Polyester/polyethylene
construction
Features
■ Temperature rating 125 °C
(3000 h), 150 °C (1000 h)
■ 2:1 shrink ratio
■ High performance polyester
fibers
■ Highly flexible
■ Halogen free
■ Available in many sizes
■ Low shrink temperature
Benefits
■ Excellent mechanical
protection for power cables
even at high temperatures
■ Fits perfectly to all cables
therefore minimum space
consumption
■ Highly flexible thus no
constraints regarding routing
of power cables
For ordering information please contact your local sales representative.
12-26 All specifications subject to change. Consult Tyco Electronics for latest specifications.
39. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Application Tooling
Tyco Electronics Tooling
for the Automotive Industry
Tyco Electronics’ Global Application Tooling Division (GATD) is dedicated to providing high
quality equipment options to meet all levels of your connector product specifications.
We are also able to provide a broad range of equipment for other manufacturer’s products.
Our equipment range is vast and unmatched by others operating in the same industry
segments, as is our global presence and support network in the form of field service
engineers and product managers. You will see from browsing this catalog; we supply
everything from simple hand tools to the most complex automated systems – you name it,
we supply it!
Equipment is segregated into two categories:
Generic Equipment
Where we can supply you with sufficient information referenced by Part Number such that you
can identify and order what you need yourself.
Specialized Equipment
Where you will need help from our specialist product managers to identify what’s just right for
your application.
Finding Equipment Online
Powerful search functions are available to identify appropriate tooling:
● Applicators — www.tooling.tycoelectronics.com/europe/applicator.asp
● Hand Tools — www.tooling.tycoelectronics.com/europe/handtools.asp
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-27
40. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Numerical Index
Part Number Page Part Number Page Part Number Page
1-1414939-4 12-18
1-1414995-0 12-16
0-1416010-1 12-17
5-1618389-5 12-13
0-2098190-1 12-12
0-2098372-1 12-12
Disclaimer
While Tyco Electronics and its affiliates referenced herein have made every reasonable effort to ensure
the accuracy of the information contained in this catalog, Tyco Electronics cannot assure that this
information is error free. For this reason, Tyco Electronics does not make any representation or offer any
guarantee that such information is accurate, correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information at any time. Tyco Electronics expressly disclaims any
implied warranty regarding the information contained herein, including, but not limited to, the implied
warranties of merchantability or fitness for a particular purpose. Tyco Electronics' only obligations are
those stated in Tyco Electronics’ Standard Terms and Conditions of Sale. Tyco Electronics will in no
case be liable for any incidental, indirect or consequential damages arising from or in connection with,
including, but not limited to, the sale, resale, use or misuse of its products. Users should rely on their
own judgment to evaluate the suitability of a product for a certain purpose and test each product for
its intended application.
In case of any potential ambiguities or questions, please don’t hesitate to contact us for clarification.
www.tycoelectronics.com
www.tycoelectronics.com/automotive
AMP, AMP MCP, KILOVAC, POLYSWITCH, RAYCHEM, TE (logo) and Tyco Electronics are trademarks
of the Tyco Electronics group of companies and its licensors.
USCAR is a trademark of United States Council for Automotive Research. Other product names, logos,
and company names mentioned herein may be trademarks of their respective owners.
12-28 All specifications subject to change. Consult Tyco Electronics for latest specifications.
41. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Engineering Notes
All specifications subject to change. Consult Tyco Electronics for latest specifications. 12-29
42. Section Catalog 1654294-3.
Revised 5-2010.
Alternative Power Systems (APS) Main Catalog 1654400-1
for the Automotive Industry Chapter 12 – Issued 4-2010.
Engineering Notes
12-30 All specifications subject to change. Consult Tyco Electronics for latest specifications.
43. Global Contacts
Americas
Argentina – Buenos Aires Canada – Toronto Mexico – Mexico City United States
Phone: +54-11-4733-2202 Phone: +1-905-475-6222 Phone: +52-55-1106-0800 Harrisburg, PA
Fax: +54-11-4733-2250 Fax: +1-905-474-5520 +01-800-733-8926 Phone: +1-717-564-0100
Product Information Center: Fax: +52-55-1106-0910 Fax: +1-717-986-7575
Brasil – São Paulo Phone: +1-905-470-4425 Product Information Center:
Phone: +55-11-2103-6105 Fax: +1-905-474-5525 Phone: +1-800-522-6752
Fax: +55-11-2103-6204 For Latin/South American
Colombia – Bogotá Countries not shown Fax: +1-717-986-7575
Chile – Santiago (Venezuela /Ecuador) Phone: +54-11-4733-2015
Phone: +56-2-345-0300 Phone: +57-1-319-8999 Fax: +54-11-4733-2083
Fax: +56-2-223-1477 Fax: +57-1-319-8989
Asia/Pacific
Australia – Sydney Korea – Seoul People’s Republic of China Taiwan – Taipei
Phone: +61-2-9554-2600 Phone: +82-2-3415-4500 Hong Kong Phone: +886-2-8768-2788
Fax: +61-2-9502-2556 Fax: +82-2-3486-3810 Phone: +852-2738-8731 Fax: +886-2-8768-2268
Product Information Center: Malaysia – Kuala Lumpur Fax: +852-2735-0243 Thailand – Bangkok
Phone: +61-2-9840-8200 Phone: +60-3-7805-3055 Shanghai Phone: +66-2-955-0500
Fax: +61-2-9634-6188 Fax: +60-3-7805-3066 Phone: +86-21-2407-1588 Fax: +66-2-955-0505
Indonesia – Jakarta New Zealand – Auckland Fax: +86-21-2407-1599 Vietnam – Ho Chi Minh City
Phone: +65-6482-0311 Phone: +64-9-634-4580 Singapore – Singapore Phone: +84-8-930-5546
Fax: +65-6482-1012 Fax: +64-9-634-4586 Phone: +65-6482-0311 Fax: +84-8-930-3443
Japan – Kawasaki, Kanagawa Philippines – Makati City Fax: +65-6482-1012
Phone: +81-44-844-8111 Phone: +632-848-0171
Fax: +81-44-812-3207 Fax: +632-867-8661
Europe/Middle East /Africa
Austria – Vienna Finland – Helsinki Lithuania and Latvia South Africa – Port Elizabeth
Phone: +43-1-905-60-0 Phone: +358-95-12-34-20 Lithuania – Vilnius Phone: +27-41-503-4500
Fax: +43-1-905-60-1333 Fax: +46-8-50-72-50-01 Phone: +370-5-213-1402 Fax: +27-41-581-0440
Product Information Center: Product Information Center: Fax: +370-5-213-1403
atpic@tycoelectronics.com pic.nordic@tycoelectronics.com Spain – Barcelona
Phone: +43-1-905-60-1228 Phone: +46-8-50-72-50-20 Netherlands – ’s-Hertogenbosch Phone: +34-93-291-0330
Fax: +43-1-905-60-1333 Fax: +46-8-50-72-52-20 Phone: +31-73-6246-246 Fax: +34-93-201-7879
Fax: +31-73-6212-365 Product Information Center:
Belarus – Minsk France – Cergy-Pontoise Cedex Product Information Center: espic@tycoelectronics.com
Phone: +375-17-237-47-94 Phone: +33-1-3420-8888 picbenelux@tycoelectronics.com Phone: +34-93-291-0366
Fax: +375-17-237-47-94 Fax: +33-1-3420-8800 Phone: +31-73-6246-999 Fax: +34-93-209-1030
Product Information Center: Product Information Center: Fax: +31-73-6246-998
rupic@tycoelectronics.com francepic@tycoelectronics.com Sweden – Upplands Väsby
Phone: +7-495-790-7902 Phone: +33-1-3420-8686 Norway – Nesbru (Switchboard)
Fax: +7-495-721-1893 Fax: +33-1-3420-8623 Phone: +47-66-77-88-50 Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01 Fax: +46-8-50-72-50-01
Belgium – Kessel-Lo France Export Divisions – Product Information Center: Product Information Center:
Phone: +31-73-6246-246 Cergy-Pontoise Cedex pic.nordic@tycoelectronics.com pic.nordic@tycoelectronics.com
Fax: +31-73-6212-365 Phone: +33-1-3420-8866 Phone: +46-8-50-72-50-20 Phone: +46-8-50-72-50-20
Product Information Center: Fax: +33-1-3420-8300 Fax: +46-8-50-72-52-20 Fax: +46-8-50-72-52-20
picbenelux@tycoelectronics.com
Phone: +31-73-6246-999 Germany – Bensheim Poland – Warsaw Switzerland – Steinach
Fax: +31-73-6246-998 Phone: +49-6251-133-0 Phone: +48-22-4576-700 Phone: +41-71-447-0447
Fax: +49-6251-133-1600 Fax: +48-22-4576-720 Fax: +41-71-447-0444
Bulgaria – Sofia Product Information Center: Product Information Center: Product Information Center:
Phone: +359-2-971-2152 Germany-PIC@tycoelectronics.com plpic@tycoelectronics.com chpic@tycoelectronics.com
Fax: +359-2-971-2153 Phone: +49-6251-133-1999 Phone: +48-22-4576-704 Phone: +41-71-447-0447
Fax: +49-6251-133-1988 Fax: +48-22-4576-720 Fax: +41-71-447-0400
Czech Republic and Slovakia
Czech Republic – Kurim Greece – Athens Romania – Bucharest Turkey – Istanbul
Phone: +420-541-162-108 Phone: +30-210-9370-396/397 Phone: +40-21-311-3479/3596 Phone: +90-212-281-8181/2/3
Fax: +420-541-162-104 Fax: +30-210-9370-655 Fax: +40-21-312-0574 +90-212-282-5130/5430
Product Information Center: Fax: +90-212-281-8184
czpic@tycoelectronics.com Hungary – Budapest Russia – Moscow
Phone: +420-541-162-113 Phone: +36-1-289-1000 Phone: +7-495-790-7902 Ukraine – Kiev
Fax: +420-541-162-104 Fax: +36-1-289-1010 Fax: +7-495-721-1893 Phone: +380-44-206-2265
Product Information Center: Product Information Center: Fax: +380-44-206-2264
Denmark – Glostrup Phone: +36-1-289-1016 rupic@tycoelectronics.com Product Information Center:
Phone: +45-43-48-04-00 Fax: +36-1-289-1017 Phone: +7-495-790-7902 uapic@tycoelectronics.com
Fax: +46-8-50-72-50-01 Fax: +7-495-721-1893 Phone: +380-44-206-2265
Product Information Center: India – Bangalore Fax: +380-44-206-2264
pic.nordic@tycoelectronics.com Phone: +91-80-2854-0800 Russia – Yekaterinburg
Phone: +46-8-50-72-50-20 Fax: +91-80-2854-0814 Phone: +7-343-2531-153 United Kingdom and
Fax: +46-8-50-72-52-20 Fax: +7-343-2531-152 Ireland – Swindon
Italy – Collegno (Torino) Phone: +44-8706-080208
Egypt – Cairo Phone: +39-011-4012-111 Russia – Nizhniy Novgorod Fax: +44-208-954-6234
Phone: +20-2417-7647 Fax: +39-011-4031-116 Phone: +7-831-220-33-05/-06 Product Information Center:
Fax: +20-2419-2334 Product Information Center: Fax: +7-831-220-33-39/-40 picuk@tycoelectronics.com
itpic@tycolectronics.com Phone: +44-800-267-666
Estonia – Tartu Phone: +39-011-4012-632 Slovenia – Ljubljana
Phone: +386-1561-3270 Fax: +44-208-420-8095
Phone: +372-5138-274 Fax: +39-011-4028-7632
Fax: +372-7400-779 Fax: +386-1561-3240
http://www.tycoelectronics.com/help www.tycoelectronics.com/automotive
www.tycoelectronics.com/automotive/sensors • www.tycoelectronicsmost.com