The Warmline insulating laminates are designed to simply and effectively improve thermal efficiency in walls and roofs. They are made of extruded poly, expanded poly, PIR, or phenolic foam bonded to plasterboard. The document provides installation instructions, product specifications, and benefits such as being readily available, quick to install, and helping to meet building regulations.
Isokern Celsius stove system installation instructions
Warmline range Data Sheets
1. Warmline XPS
Extruded Poly Bonded to Plasterboard
The Warmline insulating laminates are designed as a simple
effective way to improve the thermal efficiency in both walls
and roof applications. They are fully applicable with Part L
of the building regulations.
Insulation and
Drywall Products
2. Fixing instructions for Dot and dab
For bonding Warmline range to a wall use a proprietary
gypsum based adhesive.
Please follow the manufacturers instructions. As per
manufacturers recommendations apply a continuous
ribbon of adhesive around any openings.
Apply 3 vertical rows of adhesive dabs to the walls at
300mm centres. Also insure that there is a continuous
bead at the bottom and top.
After the adhesive has set fix a minimum of 2 insulation
anchors through the board into the wall. They must go
into the masonry by a minimum of 30mm.
Fixing instructions for mechanical fixing
Fix to the wall treated batons 50mm x 25mm at a
maximum of 600mm centres. Also fit horizontal batons at
both floor and ceiling level.
Then fit the Warmline board using drywall screws at
150mm centres. Always insure that they penetrate the
batons by 25mm.
When installing boards to rafters fix them at right angles
to the timbers. To ensure a solid finish bridging pieces are
to used in-between the rafters.
Insulation Manufacturers & Distributors
For more details you can contact our technical team
Unit 6, Coopers Point, Coopers Lane, Knowsley Industrial Park, Liverpool L33 7UB
Sales: 07872 989689 Main Depot: 01515 463260 Fax: 0151 5484543
Product Description Overall Foam Plasterboard Sheets m2
per Thermal U-value U-value
Code & Size Thickness Thickness Thickness per Pallet Board Resistance Fixed Batons Dot & Dab
R-value (W/m2
K) (W/m2
K)
27mm 17.5mm 9.5mm 78 2.88 0.560 0.838 0.884
30mm 17.5mm 12.5mm 70 2.88 0.575 0.827 0.873
35mm 25.5mm 9.5mm 60 2.88 0.795 0.700 0.732
38mm 25.5mm 12.5mm 55 2.88 0.810 0.693 0.724
40mm 30.5mm 9.5mm 53 2.88 0.942 0.635 0.661
43mm 30.5mm 12.5mm 50 2.88 0.957 0.629 0.654
45mm 35.5mm 9.5mm 47 2.88 1.089 0.580 0.602
48mm 35.5mm 12.5mm 44 2.88 1.104 0.575 0.597
55mm 45.5mm 9.5mm 38 2.88 1.383 0.496 0.512
Warmline
XPS
1.2 x 2.4
Extruded
Poly
Bonded to
Plasterboard
Calculations are based on a 215mm thick solid brickwork wall and includes a 2mm plaster skim coat. Timber battens are 25x50mm at 600mm Centres
Extruded Poly Bonded to Plasterboard Benefits
G All thicknesses readily available
G Simple solution to upgrading walls and roofs
G Quick and easy to install
G Can be used for both newbuild and refurb
G A simple way to meet building regulations
G Cost effective return
Technical Specifications
3. WWarmline EPS
Polystyrene Bonded to Plasterboard
The Warmline insulating laminates are designed as a simple
effective way to improve the thermal efficiency in both walls
and roof applications. They are fully applicable with Part L
of the building regulations.
Insulation and
Drywall Products
4. Fixing instructions for Dot and dab
For bonding Warmline range to a wall use a proprietary
gypsum based adhesive.
Please follow the manufacturers instructions. As per
manufacturers recommendations apply a continuous
ribbon of adhesive around any openings.
Apply 3 vertical rows of adhesive dabs to the walls at
300mm centres. Also insure that there is a continuous
bead at the bottom and top.
After the adhesive has set fix a minimum of 2 insulation
anchors through the board into the wall. They must go
into the masonry by a minimum of 30mm.
Fixing instructions for mechanical fixing
Fix to the wall treated batons 50mm x 25mm at a
maximum of 600mm centres. Also fit horizontal batons at
both floor and ceiling level.
Then fit the Warmline board using drywall screws at
150mm centres. Always insure that they penetrate the
batons by 25mm.
When installing boards to rafters fix them at right angles
to the timbers. To ensure a solid finish bridging pieces are
to used in-between the rafters.
Insulation Manufacturers & Distributors
For more details you can contact our technical team
Unit 6, Coopers Point, Coopers Lane, Knowsley Industrial Park, Liverpool L33 7UB
Sales: 07872 989689 Main Depot: 01515 463260 Fax: 0151 5484543
Calculations are based on a 215mm thick solid brickwork wall and includes a 2mm plaster skim coat. Timber battens are 25x50mm at 600mm Centres
Expanded Poly Bonded to Plasterboard Benefits
G All thicknesses readily available
G Simple solution to upgrading walls and roofs
G Quick and easy to install
G Can be used for both newbuild and refurb
G A simple way to meet building regulations
G Cost effective return
Technical Specifications
Product Description Overall Foam Plasterboard Sheets m2
per Thermal U-value U-value
Code & Size Thickness Thickness Thickness per Pallet Board Resistance Fixed Batons Dot & Dab
R-value (W/m2
K) (W/m2
K)
22mm 12.5mm 9.5mm 95 2.88 0.374 0.992 1.059
30mm 20.5mm 9.5mm 70 2.88 0.584 0.821 0.866
40mm 30.5mm 9.5mm 53 2.88 0.720 0.739 0.775
50mm 40.5mm 9.5mm 42 2.88 1.111 0.573 0.594
60mm 50.5mm 9.5mm 35 2.88 1.374 0.498 0.514
Warmline
EPS
1.2 x 2.4
Expanded
Poly
Bonded to
Plasterboard
5. Warmline PIR
PIR Bonded to Plasterboard
The Warmline insulating laminates are designed as a simple
effective way to improve the thermal efficiency in both walls
and roof applications. They are fully applicable with Part L
of the building regulations.
Insulation and
Drywall Products
6. Fixing instructions for Dot and dab
For bonding Warmline range to a wall use a proprietary
gypsum based adhesive.
Please follow the manufacturers instructions. As per
manufacturers recommendations apply a continuous
ribbon of adhesive around any openings.
Apply 3 vertical rows of adhesive dabs to the walls at
300mm centres. Also insure that there is a continuous
bead at the bottom and top.
After the adhesive has set fix a minimum of 2 insulation
anchors through the board into the wall. They must go
into the masonry by a minimum of 30mm.
Fixing instructions for mechanical fixing
Fix to the wall treated batons 50mm x 25mm at a
maximum of 600mm centres. Also fit horizontal batons at
both floor and ceiling level.
Then fit the warmline board using drywall screws at
150mm centres. Always insure that they penetrate the
batons by 25mm.
When installing boards to rafters fix them at right angles
to the timbers. To ensure a solid finish bridging pieces are
to used in-between the rafters.
Insulation Manufacturers & Distributors
For more details you can contact our technical team
Unit 6, Coopers Point, Coopers Lane, Knowsley Industrial Park, Liverpool L33 7UB
Sales: 07872 989689 Main Depot: 01515 463260 Fax: 0151 5484543
Calculations are based on a 215mm thick solid brickwork wall and includes a 2mm plaster skim coat. Timber battens are 25x50mm at 600mm Centres
Polyisocyanurate Foam Bonded to Plasterboard
Benefits
G All thicknesses readily available
G Simple solution to upgrading walls and roofs
G Quick and easy to install
G Can be used for both newbuild and refurb
G A simple way to meet building regulations
G Cost effective return
Technical Specifications
Product Description Overall Foam Plasterboard Sheets m2
per Thermal U-value U-value
Code & Size Thickness Thickness Thickness per Pallet Board Resistance Fixed Batons Dot & Dab
R-value (W/m2
K) (W/m2
K)
27mm 17mm 9.5mm 78 2.88 0.840 0.679 0.709
29mm 17mm 12.5mm 74 2.88 0.855 0.672 0.701
35mm 25mm 9.5mm 60 2.88 1.181 0.551 0.571
38mm 25mm 12.5mm 55 2.88 1.196 0.547 0.566
48mm 38mm 9.5mm 44 2.88 1.772 0.416 0.427
50mm 38mm 12.5mm 42 2.88 1.787 0.413 0.424
60mm 50mm 9.5mm 35 2.88 2.318 0.339 0.346
62.5mm 50mm 12.5mm 34 2.88 2.333 0.337 0.344
70mm 60mm 9.5mm 30 2.88 2.772 0.294 0.299
72.5mm 60mm 12.5mm 29 2.88 2.787 0.292 0.298
80mm 70mm 9.5mm 26 2.88 3.227 0.259 0.263
82.5mm 70mm 12.5mm 25 2.88 3.242 0.258 0.262
90mm 80mm 9.5mm 23 2.88 3.681 0.232 0.235
92.5mm 80mm 12.5mm 22 2.88 3.696 0.231 0.234
102mm 90mm 12.5mm 21 2.88 4.152 0.209 0.212
Warmline
PIR
1.2 x 2.4
PIR
Bonded to
Plasterboard
7. Warmline PHE
Phenolic Bonded to Plasterboard
The Warmline insulating laminates are designed as a simple
effective way to improve the thermal efficiency in both walls
and roof applications. They are fully applicable with Part L
of the building regulations.
Insulation and
Drywall Products
8. Fixing instructions for Dot and dab
For bonding Warmline range to a wall use a proprietary
gypsum based adhesive.
Please follow the manufacturers instructions. As per
manufacturers recommendations apply a continuous
ribbon of adhesive around any openings.
Apply 3 vertical rows of adhesive dabs to the walls at
300mm centres. Also insure that there is a continuous
bead at the bottom and top.
After the adhesive has set fix a minimum of 2 insulation
anchors through the board into the wall. They must go
into the masonry by a minimum of 30mm.
Fixing instructions for mechanical fixing
Fix to the wall treated batons 50mm x 25mm at a
maximum of 600mm centres. Also fit horizontal batons at
both floor and ceiling level.
Then fit the Warmline board using drywall screws at
150mm centres. Always insure that they penetrate the
batons by 25mm.
When installing boards to rafters fix them at right angles
to the timbers. To ensure a solid finish bridging pieces are
to used in-between the rafters.
Insulation Manufacturers & Distributors
For more details you can contact our technical team
Unit 6, Coopers Point, Coopers Lane, Knowsley Industrial Park, Liverpool L33 7UB
Sales: 07872 989689 Main Depot: 01515 463260 Fax: 0151 5484543
Calculations are based on a 215mm thick solid brickwork wall and includes a 2mm plaster skim coat. Timber battens are 25x50mm at 600mm Centres
Phenolic Foam Bonded to Plasterboard Benefits
G All thicknesses readily available
G Simple solution to upgrading walls and roofs
G Quick and easy to install
G Can be used for both newbuild and refurb
G A simple way to meet building regulations
G Cost effective return
Technical Specifications
Product Description Overall Foam Plasterboard Sheets m2
per Thermal U-value U-value
Code & Size Thickness Thickness Thickness per Pallet Board Resistance Fixed Batons Dot & Dab
R-value (W/m2
K) (W/m2
K)
30mm 20mm 9.5mm 74 2.88 0.997 0.613 0.638
35mm 25mm 9.5mm 66 2.88 1.235 0.535 0.554
37.5mm 25mm 12.5mm 58 2.88 1.250 0.531 0.549
40mm 30mm 9.5mm 55 2.88 1.474 0.474 0.489
42.5mm 30mm 12.5mm 52 2.88 1.489 0.471 0.485
50mm 40mm 9.5mm 44 2.88 1.950 0.387 0.397
52.5mm 40mm 12.5mm 42 2.88 1.965 0.385 0.394
60mm 50mm 9.5mm 36 2.88 2.426 0.327 0.334
62.5mm 50mm 12.5mm 35 2.88 2.441 0.325 0.332
70mm 60mm 9.5mm 32 2.88 2.902 0.283 0.288
72.5mm 70mm 12.5mm 30 2.88 3.393 0.248 0.252
80mm 70mm 9.5mm 28 2.88 3.378 0.249 0.253
90mm 80mm 9.5mm 24 2.88 3.855 0.223 0.224
Warmline
PHE
1.2 x 2.4
Phenolic
Bonded to
Plasterboard
Insulation facing can either be foil or paper, please specify when ordering.