FAGERHULT E-SENSE Added intelligence Fagerhult e-Sense – lighting control made simple Some forms of technology have been steeped in mystery to the extent that they negate the purpose for which they were designed. Light control is such an example. A technology that was born from our need of ergonomic and energy-saving lighting. Obvious, yet too diffi cult to understand. Both to those planning, the person installing, and to the person who has to use it. At last the technology has fi nally matured and Fagerhult can now introduce a unique concept. e-Sense – added intelligence. All you need to do is to connect the luminaire and press a button. Our aim has been to eliminate all the hidden costs of installation, operation and maintenance. To avoid switches and complicated settings. You install a normal luminaire, but get a complete control system.

1. fagerhult e-sense
Added intelligence

2. Some forms of technology have been steeped in
mystery to the extent that they negate the purpose
for which they were designed.
Light control is such an example. A technology
that was born from our need of ergonomic and
energy-saving lighting. Obvious, yet too difficult
to understand. Both to those planning, the person
installing, and to the person who has to use it.
At last the technology has finally matured and Fa-
gerhult can now introduce a unique concept. e-Sense
– added intelligence. All you need to do is to connect
the luminaire and press a button.
Our aim has been to eliminate all the hidden costs
of installation, operation and maintenance. To avoid
switches and complicated settings. You install a nor-
mal luminaire, but get a complete control system.
With e-Sense each luminaire in the room can
think for itself, or as one system. The luminaires
have a newly developed multisensor that detects
movement in the room, measures the daylight and
and adapts the output accordingly. You determine
its level of intelligence by selecting from two system
models, the fully featured e-Sense ActiLume or the
basic model e-Sense SmartSwitch. No matter what
you choose the luminaire takes care of itself.
On the other hand, there is nothing more frustra-
ting than inflexible technology. If you want to you
can control the light yourself, with the help of a pull
switch. And if you want to refurnish your office, it's
not a problem as the luminaire is an independent
working unit. Time consuming and costly repro-
gramming is no longer needed.
e-Sense represents ease of use, efficiency, energy
and economy. Easy to install and use. Effective with
regard to light treatment and energy consumption
– you save up to 75 per cent. Ergonomic as you look
after visual and psychological needs. Economy is the
sum of all parts. We have integrated light control
into the system, so you can divert your energies
elsewhere. A smart move we think.
Fagerhult e-Sense – lighting control made simple

3. Fagerhult e-Sense – you control the design
Fagerhult e-Sense is the smart way to save energy.
One of the most difficult choices you have to make is between form
and function. This has been the case for a long time within light control.
Choosing a light control function limited the number of luminaire models
available, while those who gave priority to design had to cope with com-
plicated control systems – or no control at all. This was an insult to all the
architects, light planners and interior designers that applied a holistic ap-
proach to their work. Consequently, we now offer e-Sense on virtually all
luminaires in our product range. Which reflects the growing importance
we attach to integrated lighting control.
Initially we will offer various leading products in an e-Sense design with
ready-to-install order numbers. Install, connect and start experiencing the
benefits of control.
We also offer e-Sense MLS, with a range of existing luminaires incorpo-
rating the new miniaturized sensor from Ex-Or, the DH sensor.
Further details available on request.
Fagerhult e-sense is the easiest, quickest
way to install light control. All you have to
do is to connect it. And the system is up and
running. If you want to make personal set-
tings, you can do this by pressing the service
button and selecting between the two most
common operating functions. It couldn’t be
easier.

4. BA
Fagerhult e-Sense luminaires are equipped with integrated
light control. An attractive, easy installation without the need
of add-on or external sensors. No connections – no problems.
e-Sense ActiLume
ActiLume is a control system based on
the DALI protocol. The system consists of
a detector and a controller. The sensor
has three different parts: a detector for
presence, a sensor for daylight control and
an IR receiver should you want to use a
remote control.
e-Sense ActiLume offers maximum
comfort and energy savings up to 75 %.
The immense energy saving potential gives
the possibility of repaying the investment
quickly.
The system also offers the user the
chance to adjust the lighting to his/her
personal level with the help of a retractable
switch, pull cord or a remote control.
The master luminaire can control ten
others (11 HF-ballasts). The system has two
channels, A and B. Channel B has a 30 %
offset, which means that Channel B starts
to be regulated when channel A drops to
70 %. When channel A is regulated to 10 %,
channel B is then set to 40 %.
In recessed installations channel A can
control the luminaires close to the window
where there is more incoming daylight, and
channel B control luminaires away from
the windows.
In pendant three lamp luminaires (with
two ballasts) we use the system to control
the direct and indirect light separately with
channel B controlling the indirect light.
Fagerhult e-Sense – two systems, same simplicity

5. e-Sense SmartSwitch
SmartSwitch is an on/off-sensor that con-
trols the connected luminaire via the mains
voltage. There is also a model with pull dim
for individual setting of the lighting level
available. SmartSwitch gives automatic ig-
nition/extinguishing controlled by presence
and the ambient light. The presence detec-
tion can be set with a delay of between 1
to 30 minutes.
When the amount of ambient light
(daylight) is sufficient the lighting is swit-
ched off, the lighting level that activates
switching off can be set between 50–2000
lux. This function can be omitted.
e-Sense SmartSwitch absence dimming
A control function adapted to a room in an
office which is used sparingly, for example,
a copying room, stockroom, corridors or
a cloakroom. The lighting level is set at a
constant low level to counteract the im-
pression of a darkened room. Any presence
is detected and the lighting is adjusted to
100 %. The time delay to return to the low
level (10 %) can be short unlike control with
a switch off function where you need to av-
oid unnecessary starting of the fluorescent
lamp. If you wish to switch off the lumin-
aire completely, this can be done centrally
once working hours are over.
In addition, with the setting for lux
on/off you can prevent control if there is
already sufficient light in the room. Adjust-
ment of the time and lux level are made on
the rear of the sensor.
Fagerhult e-Sense – two systems, same simplicity

6. BA
e-Sense ActiLume
Functions offered by e-Sense luminaires equipped with ActiLume
Presence detection
Presence control switches the lighting on and off auto-
matically. After the last presence detection the lighting
is switched off with a 15 minutes delay.
Daylight control
A sensor adapts the lighting output to the amount of
incidental light (natural light). If there is no daylight,
this function regulates the light output to maintain
the required illumination level.
IR-receiver
To control and programme using the remote control if
required. The remote control is an accessory.
Manual control (touch)
Full manual control via pull dim in the luminaire or
retractive switch on the wall.
Channel B 30 % offset
Channel B has a 30 % offset, which means that channel
B starts to be regulated when channel A drops to 70 %.
When channel A is regulated to 10 %, channel B is then
set to 40 %.
ActiLume offers maximum comfort and au-
tomatic energy saving. ActiLume adapts the
level of light to the surrounding environ-
ment and when the room is not in use the
light is switched off.
When the sensor detects presence, the
system automatically switches the light
on. If there is sufficient daylight in a room
the level is automatically dampened. The
light is switched off when the room has
been empty for some time. As light is only
on when needed, the system can give the
energy savings up to 75 %.
Night: The office is in darkness. 07:56 The luminaire is switched
on with presence as the daylight
does not satisfy the lighting need.
Daylight reduces the luminaire
light accordingly, also known as
daylight control.
Adjustment is performed slowly
and constantly according to a set
value. When dimmed, the uplight
is 30% higher than the downlight.
The series of pictures shows what happens in the room. The curve shows how the luminaire's energy use varies throughout the day.

7. e-Sense ActiLume – pendant 2-lamp luminaires
Choices for presence detection:
Automatic ON Automatic OFF (delay 15 minutes)
Manual ON (with a light level over 600 lux) Automatic OFF (delay 15 minutes)
(Always adjustment to low level before OFF).
Choices for daylight sensor:
Automatic setting to 600 lux.
Manual setting adjustment.
Choices for manual control:
Pull dim (only pendant luminaires) or retractive switch on/off and control.
IR-transmitter on/off and control (accessory).
e-Sense ActiLume
Functions offered by e-Sense luminaires equipped with ActiLume
e-Sense ActiLume – pendant 3-lamp luminaires
Choices for presence detection:
Automatic ON Automatic OFF (delay 15 minutes).
Manual ON (with a light level over 600 lux) Automatic OFF (delay 15 minutes).
(Always adjustment to low level before OFF).
Choices for daylight sensor:
Automatic setting to 600 lux.
Manual setting adjustment.
Choices for manual control:
Pull dim (only pendant luminaires) or retractive switch on/off and common
control of downlight/uplight.
IR-transmitter on/off and control (accessory).
Special functions, pendant or recessed installations:
30 % offset, uplight adjusted to 30 % above the downlight with dimming.
In recessed installations channel A can control the luminaires close to the win-
dow where there is more incoming daylight, and channel B controls luminaires
away from the windows.
Lunch: After the last presence, the
light is softened and switched off
after 15 minutes.
The luminaire is not switched by
presence as the light requirement
is provided by incidental daylight.
Manual or automatic control to
satisfy the lighting requirement.
After the last presence, the light
is dimmed and switched off after
15 minutes.

8. e-Sense SmartSwitch
Functions offered by e-Sense luminaires equipped with SmartSwitch
Presence detection
Presence control switches the lighting on and off. After
the last presence detection the light is automatically
switched off. The time between detection and swit-
ching off is adjustable, 1–30 minutes.
Lux level setting
Setting the threshold value prevents the presence de-
tector reacting when daylight is sufficient.
Manual control
Icons suggest that retractable switch operation
is also possible.
Absence dimming
The presence detector adjusts to a high light level on
detection and returns to a low level after a short period
of time. No switch off function.
Night: The office is in darkness 07:56 Automatic ignition. Manual control of uplights and
downlights.
The light is switched off according
to the time set on the sensor,
approximately 15 minutes.
Night: The light is set to a low
basic level.
The light switches to a higher
level when presence is detected.
The delay after the last presence
is short, approx. 5 minutes.
After 5 minutes the light is
adjusted down to the basic level.
The series of pictures show two SmartSwitch models. The upper series of pictures shows a combination with manual control, e-Sense
SmartSwitch ensures that the light in the room is switched off when not in use. The lower series of pictures shows how energy usage
reduces considerably with the use of absence dimming.

9. e-Sense SmartSwitch On/Off – luminaires without dim-
mable HF ballasts
Choices for presence detection:
Automatic ON/OFF (set time 1–30 minutes).
Not ON (when the lux level is above the set value) Automatic OFF.
Choices for the Lux sensor:
Not ON with high lux level.
Manual modification of the setting for the lux level (50–2000 lux).
Note:
The luminaire does not have a dimmable HF-ballast, the function is only
ON/OFF.
e-Sense SmartSwitch – pendant luminaire with dimma-
ble HF-ballast
Choices for presence detection:
Automatic ON/OFF (set time 1–30 minutes).
Choices for manual control:
Pull dim ON/OFF and dimming.
Special functions:
The luminaire is equipped with an ECO-lp HF-ballast with memory function
when switched off.
Note:
Do not use a lux level setting. If the room is bright and the sensor does not
ignite, the cord will not work.
e-Sense SmartSwitch
Functions offered by e-Sense luminaires equipped with a Tridonic SmartSwitch
e-Sense SmartSwitch with absence dimming – with
dimmable HF-ballast
Choices for presence detection:
Automatic HIGH/LOW (set time 1–30 minutes).
If the lux level is above the set value light remains on low level.
Choices for manual control:
None.
Special functions:
The luminaire is equipped with an ECO-lp HF-ballast that automatically repli-
cates the Absence dimming function after five minutes.
Note:
No OFF function, the level is permanently set to 10 % value if no presence is
detected.

10. Loop Light is a well-designed
classic from Fagerhult. The lu-
minaire has white or alu-grey
body of extruded aluminium
and ends of cast metal.
The sensor unit is located in
the luminaire's end cap.
Loop Light Beta ActiLume SmartSwitch SmartSwitch SmartSwitch
Pull dim On/Off Pull dim Absence
dimm.
FDH Finish
2x28 W White 19248 -217 -219 -220 -218
2x28 W Grey 19268 -217 -219 -220 -218
2x35 W White 19249 -217 -219 -220 -218
2x35 W Grey 19269 -217 -219 -220 -218
Loop Light Beta e-Sense

11. Ten° Line offers an excellent indirect
light contribution which gives high
lighting comfort, ideal when working
with a computer monitor.
Body of sheet steel in a white or
alu-grey structured enamelled finish.
e-Sense luminaires are available with
both alu-grey cross-blade louvre or
with double parabolic, Beta-louvre in
satin matt metallized aluminium.
The sensor in the cross-blade design
is placed in the body and in the Beta
design in the louvre’s first cell.
Ten° Line e-Sense
Ten° Line ActiLume SmartSwitch SmartSwitch SmartSwitch
Pull dim On/Off Pull dim Absence
dimm.
FDH Finish
Lamell
3x28 W White 26115 -217 -219 -220 -218
3x28 W Grey 26116 -217 -219 -220 -218
2x35 W White 26123 -217 -219 -220 -218
2x35 W Grey 26124 -217 -219 -220 -218
Beta
3x28 W White 26235 -308 -314 -315 -309
3x28 W Grey 26236 -308 -314 -315 -309

12. Above is Indigo Combo 1-cell presented wth e-Sense suffix codes. Indigo Combo is also available with
two louvre cells, see main catalogue.
The uncomplicated and clean
recessed design combined with
high efficiency and technical
performance allows Indigo
Combo to create comfortable
environments.
Combo is available in square
or rectangular designs and in
two sizes with one or two louv-
re cells with up to four light
sources. The active Beta louvre
is combined with indirect light
distribution in the luminaire’s
secondary reflector. The sensor
unit is placed in the first cell.
Indigo Combo e-Sense
Indigo Combo, 1-cell, for visible T-bars ActiLume SmartSwitch
FDH Absence dimm.
300x1200
1x28 W 24855 -308 -309
2x28 W 24856 -308 -309
1x54 W 24857 -308 -309
600x600
2x14 W 24862 -308 -309
600x1200
1x28 W 24871 -308 -309
2x28 W 24872 -308 -309
1x54 W 24873 -308 -309

13. Tigris, a luminaire with a clean
design and compact footprint
represents design united with
technology. Developed for office
environments and conference
rooms where a luminaire with
its own style is sought.
Body of sheet steel in white
or alu-grey structured enamel-
led finish. Tigris Beta has two
fluorescent lamps for the up-
light and the third is placed in
a double parabolic, Beta-louvre
in satin matt metallized alumi-
nium. In Tigris the sensor unit is
mounted in the body.
Tigris e-Sense
Tigris Beta ActiLume SmartSwitch SmartSwitch SmartSwitch
FDH Pull dim On/Off Pull dim Absence dimm.
3x28 W 26810 -217 -219 -220 -218
3x35 W 26811 -217 -219 -220 -218
3x54 W 26812 -217 -219 -220 -218

14. Manual control
Any retractable switch can be connected to the manual light
control, quickly pressing for on/off. While pressing and holding
gives a dimmer function. Pull switch not required for the UK.
IR remote controls IRT 8010 and IRT 8050
A basic remote control for
general use. The units have
only two buttons, one to
switch on/increase the light
level and one to switch off/
reduce the light level. Aim
the transmitter towards the
ActiLume sensor in the lu-
minaire and adjust the light
level. A holder is provided
so that the remote control
is always kept in the same place. The same control functions are
offered by the transmitter IRT 8050 for fixed wall installation
(small picture). Handheld remote control Cat. no 86153.
Wall mounted remote control Cat. no 86151.
Programming of additional functions with IRT 8099
The simplicity of the
ActiLume system is based
on the ability to start the
system by pressing the
service button on the sen-
sor. Should you require a
modified function, several
modes can be programmed
with the help of the remote
control IRT 8099. The system
comes with nine pre-pro-
grammed modes for e.g. schools, corridors, etc. The first two are
accessed using the service button, see the left-hand column. Cat.
no 86155.
Detection over a larger area with IRT 8118
An ActiLume sensor placed
in a luminaire approxi-
mately 2.3 m above the floor
has a presence detector
with a detection range of
about 5 x 6 metres. If you
wish to detect presence over
a greater area, one or more
detectors type IRT 8118
can be connected to one of
the DALI terminals in the
luminaire. No programming or commissioning is necessary. IRT
8118 is ideally placed in the ceiling, and has a detection area of
approximately 7 x 7 metres. IRT 8118 is only a presence detec-
tor. Cat. no 86152.
Product description
The system consists of
a small, compact sensor
unit and a controller de-
signed for assembly in
the luminaire. ActiLume
is a simple system
produced for “plug and
play” lighting solutions
in office areas. The
combination presence
detector – light sensor
– dimmable HF-ballasts gives a vast range of choices. With
the experience of knowing which combinations are used
the most, you can easily attain the perfect solution for light
control in an office.
To start an ActiLume installation is easy – just connect it!
ActiLume has a factory
setting that automati-
cally sets the lighting
level. However, you
should make your own
setting for the room in
question. NOTE! Avoid
the influence of daylight
when doing this.
Press in the service
button for longer than
3 seconds (the fluorescent lamp flashes once). After 30
seconds the adjustment is made (the fluorescent lamp
flashes again). A delay of 30 seconds is used to give time to
move away a ladder or anything else that may obstruct the
normal reading of the work surface with a sensor. ActiLume
adjusts the light level automatically to approximately 80 %
of the new light value. This corresponds to about 600 lux
(500 lux + 0.8 maintenance factor) on the work surface
in an office with the normal placement of the luminaire.
Adjustment to 80% is as the new, maintained, light level
is usually higher than the normal value. You already make
savings with this setting.
You can easily choose one of two standard functions by
pressing the sensor unit's service button (press less than
3 seconds). When the button is released the fluorescent
lamp indicates by flashing once or twice:
Flashing once = “Mode 1” Office (the light is switched off
approximately 15 minutes after last presence detection).
Flashing twice = “Mode 2” Landscape office solution (the
light is adjusted down to a low level after the last presence
detection and is completely switched off 2 hours later).
ActiLume functionality and commissioning

15. SmartSwitch functionality and commissioning
Product description
SmartSwitch consists of a
small sensor unit and the
combined relay/power sup-
ply. The capacity of the relay
is 200 VA, which means you
can connect one or two HF-
ballasts for ignition/switch-
ing off.
The sensor is a PIR-unit
(Passive Infra Red) with a
detection area of approxi-
mately 4 x 3 metres when the
luminaire is placed at a height of 2.1 metres. Within this area the
sensor detects IR radiation from the body whereby the relay closes
and the lamp in the luminaire comes on.
At the rear of the sensor unit
on SmartSwitch there is also
a setting for the lux level.
This is a threshold value that
prevents the sensor from re-
acting to presence if there is
already sufficient light in the
room. This setting has been
removed in luminaires with
Pull dim, so that you can al-
ways manually switch on and
switch off in a bright room.
The lux level is more usable with absence dimming. A luminaire
with SmartSwitch only needs to be connected to the mains supply
– it's then ready.
Application areas
SmartSwitch has been developed to suit most office buildings,
individual rooms as well as open office landscapes. SmartSwitch is
also ideal for entrances, corridors and small meeting rooms.
SmartSwitch ON/OFF
After the last detection the sensor switches off automati-
cally. The delay can be adjusted between 1 to 30 minutes. You
should not have a shorter switching off delay than 15 minutes.
If the luminaire switches on and off too often, this affects the
life of the fluorescent lamp.
SmartSwitch ON/OFF has a setting for the lux level, if the
light is sufficient the lamp is not switched on. e-Sense SmartS-
witch ON/OFF does not feature dimmable HF-ballasts.
SmartSwitch pull dim
Using the pull switch you can easily adjust the light level as
well as switch on and off. This is an advantage especially when
using adjustable desks. In the highest position the light level on
the work surface can be double that of when in sitting position.
The luminaire has a memory for the last setting, which with
detection means that it reignites at the level it was previously
switched off at. The setting for the lux level has been removed
so that you can always switch on and switch off the luminaire
manually using the pull cord even in a bright room.
e-Sense SmartSwitch pull dim is equipped with an ECO lp
device for dimming via the pull switch, one or two switches
depending on the luminaire. The switch provides switching on
and switching off functions as well as manual dimming.
SmartSwitch absence dimming
Control between high/low levels. This function is very much
in demand. there is still a need to adequately light areas of
low presence these include copying rooms, cloakrooms, paper
stores, etc. Frequently switching a luminaire on and off has a
negative affect on the life of the fluorescent lamp, however,
adjusting between two levels is perfectly acceptable. The
minimum level in the function is set to approximately 10 %,
which gives basic light in the room. When presence is detected
the level is adjusted directly to 100 %. The time delay back to
the low level can be short, about 1-2 minutes. This function
provides the opportunity of major energy savings in rooms with
short periods of presence without jeopardizing the life of the
fluorescent lamp. Switching off should be controlled centrally
in the system, for example, via a time switch.
The absence dimming function also features a setting for the
lux level, if the light is sufficient the level is not adjusted.
e-Sense functions ActiLume SmartSwitch SmartSwitch SmartSwitch
On/Off Pull dim Absense dimming
Presence detection
Absense dimming (high/low)
Fixed absense time (15 min)
Adjustable absense time (1–30 min)
Constant light
Automatic setting of lighting level (600 lx)
Lux level setting (50 – 2000 lx)
IR-receiver
Possibility to choose more settings (Modes)
1 pull dim in 2-lamp luminaires
1 pull dim in 3-lamp luminaires
2 pull dim in 3-lamp luminaires (separate direct/indirect)
Offset function 30%
Possibility to control more luminaires (master function)

16. Fagerhult develops, manufactures and markets
professional lighting systems for public environ-
ments such as offices, schools, industries and
hospitals. Our operations are run with a constant
focus on design, function, flexibility and energy
saving solutions.
Fagerhult is a member of the Fagerhult Group, the
largest lighting group in the Nordic region and a
leading company in Europe. We have sales com-
panies in more than 15 countries and production
units in Europe, China and Australia. In 2007 the
group had sales of SEK 2.5 billion and is listed on
the OMX Nordic Exchange in Stockholm,
Mid Cap list
fagerhult head office sweden
Fagerhults Belysning AB
566 80 Habo
Sweden
Tel +46 36 10 85 00
Fax +46 36 10 86 99
info@fagerhult.se
www.fagerhult.com
UNITED KINGDOM
Fagerhult Lighting Ltd
50 Southwark Street
London, SE1 1UN
Tel +44 (0) 207 403 4123
Fax +44 (0) 207 378 0906
light@fagerhult.co.uk
www.fagerhult.co.uk
743.EXP.1.08.23.3