With the launch of the DY-2 Family (http://www.proceq.com/en/non-destructive-test-equipment/concrete-testing/pull-off-testing/dy-2-family.html), Proceq introduces new automated pull-off testers which cover the complete range of pull-off applications. DY-2 has an integrated, feedback controlled motor which guarantees a constant load rate. The unique features offer a complete record of the pull-off test, proving that the test was carried out in accordance with the applicable standard. All models are calibrated according to EN ISO 7500-1 Class 1 and thereby exceed the accuracy requirements specified in all major standards.
Pull-off testing is one of the most widely used test methods in the construction industry. It is indispensable for the diagnosis of structural damage to buildings as well as for checking complete renovation work.
Today, Proceq announces an expansion to its existing Dyna pull-off tester portfolio with the DY-2 Family (DY-206, DY-216 and DY-225), a new generation of automated pull-off tester.
Complete range of applications covered
The three models of the DY-2 Family differentiate by a maximum pulling force. While DY-216 (15.5 kN, 3485 lbf) is covering most applications, DY-206 (6 kN, 1349 lbf) has an increased accuracy for low strength applications such as testing adhesive strength of mortars and renders. DY-225 (25 kN, 5620 lbf) can be used for very high strength applications such as testing of fibre reinforced polymers bonded to concrete structures or testing the bond strength of repair and overlay materials.
Constant load rate
One of the major influences on the result of a pull-off test is the operator influence in the application of a constant load rate. The newly introduced DY-2 models with their integrated, feedback controlled motors remove this variable completely, by providing a fully automated test at a constant load rate which can be verified.
Contact Proceq Asia Pte Ltd or visit http://www.proceq.com for more information, or to place the order
Proceq Asia Pte Ltd | 12 New Industrial Road #02-02A Morningstar Centre | Singapore 536202 | Phone +65-6382-3966
Website: http://www.proceq.com
Phone: +65 6382 3966
Fax: +65 6382 3307
Email: info-asia@proceq.com
Unlocking the Power of ChatGPT and AI in Testing - A Real-World Look, present...
DY-2 Fully-Automated Pull-Off Tester Launched by Proceq
1. Press Release
Proceq Launches New DY-2 Fully-Automated Pull-Off Tester
Schwerzenbach/Switzerland, February 2013 – With the launch of the DY-2 Family, Proceq introduces
new automated pull-off testers which cover the complete range of pull-off applications. DY-2 has an
integrated, feedback controlled motor which guarantees a constant load rate. The unique features offer
a complete record of the pull-off test, proving that the test was carried out in accordance with the
applicable standard. All models are calibrated according to EN ISO 7500-1 Class 1 and thereby exceed
the accuracy requirements specified in all major standards.
Pull-off testing is one of the most widely used test methods in the construction industry. It is indispensable for
the diagnosis of structural damage to buildings as well as for checking complete renovation work.
Today, Proceq announces an expansion to its existing Dyna pull-off tester portfolio with the DY-2 Family (DY-
206, DY-216 and DY-225), a new generation of automated pull-off tester.
Complete range of applications covered
The three models of the DY-2 Family differentiate by a maximum pulling force. While DY-216 (15.5 kN, 3485
lbf) is covering most applications, DY-206 (6 kN, 1349 lbf) has an increased accuracy for low strength
applications such as testing adhesive strength of mortars and renders. DY-225 (25 kN, 5620 lbf) can be used
for very high strength applications such as testing of fibre reinforced polymers bonded to concrete structures
or testing the bond strength of repair and overlay materials.
Constant load rate
One of the major influences on the result of a pull-off test is the operator influence in the application of a
constant load rate. The newly introduced DY-2 models with their integrated, feedback controlled motors
remove this variable completely, by providing a fully automated test at a constant load rate which can be
verified.
Unique in parameter setting
The DY-2 is further unique in that it records every single test parameter required by the specification: Time and
date of the test, test disc size, maximum load applied, automatic calculation of bond strength, applied load
rate with graphical record, complete time of test as well as the failure mode.
For the very first time, the operator is able to provide a complete record of the pull-off test, proving that the
test was carried out in accordance with the applicable standard.
Wide range of applicable standards
DY-2 conforms to all of the following standards: EN 1542, EN 1015, EN 1348, ISO 4624, BS 1881 Part 207,
ASTM D4541, ASTM C1583, ASTM D7234, ASTM D7522, ZTV-SIB 90. Additionally, most standards state an
accuracy requirement. The DY-2 is calibrated according to EN ISO 7500-1 Class 1 and thereby exceeds the
accuracy requirements specified in any of the standards listed above.
About Proceq SA
Proceq SA, established 1954 in Zurich Switzerland, is committed to the manufacturing of quality nondestructive portable
testing instruments for concrete properties and structural parameters, metal hardness and paper roll hardness. The
company’s strong research and development team continues to create products that set standards in these industries.
Proceq provides its international customers with local support through subsidiaries in Asia (Singapore), China (Shanghai),
Europe (London, Zurich), the Middle East (Dubai), Russia (St. Petersburg), South America (São Paulo), the USA (Chicago,
Pittsburgh) and through a global network of agents and partners.
For additional information about Proceq and its products, please contact your Proceq sales representative or visit
www.proceq.com.