Forty years of evolution in HVAC controls have created highly sophisticated Building Automation Systems (BAS) which, when coupled with well designed mechanical systems, are capable of minimizing energy use while maximizing occupant comfort. However, their complexity creates many opportunities to improve energy efficiency through simple maintenance procedures and common program modifications.
This webinar was presented by James Smith, Pulse Energy’s BAS Specialist, and included six simple tips that will save energy and increase the life of system components by helping your BAS run your building more efficiently.
James has 18 years of experience as a factory trained controls technician working on installation and service of BAS systems for Siemens and Johnson Controls in office towers, universities, and hospitals.
Go for Rakhi Bazaar and Pick the Latest Bhaiya Bhabhi Rakhi.pptx
Energy tips for HVAC controls systems
1. HVAC Controls Energy Saving Tips
Presenter:
James Smith
Building Automation System Specialist
2. 3 Things You Want to Know About
This Presentation
1. The presentation will be 45
minutes including Q&A
2. You can send your questions
to us via the GoToWebinar
control panel at any time
3. We will send out a link to the
recording after the presentation
3. 5 Energy Saving Tips for HVAC Controls
• Basic maintenance tips to
reduce energy use
– Mechanical inspection of
moving parts
– Software controls optimization
4. Inspect Air Handling Unit (AHU) Valves
• Heating & cooling valves
should be inspected annually
• The effect of a passing valve
can be hidden by the
response of the other valve
• Protects against
simultaneous cooling &
heating
5. Inspect Mixing Dampers
• Mixing dampers should be
checked seasonally
• Protects against
simultaneous cooling &
heating as well as incorrect
building pressure
• The effect of damper failure
can be hidden by the
response of the coil valves
6. Add Fresh Air Control
• Automatically calculate the
fresh air requirements
• Protects against excess
heating or cooling
• Can be hidden by the action
of heating and cooling valves
7. Set AHU Supply Temperatures by Zone
Zone A
Boiler
Air Handling
Unit (AHU) Zone B
Chiller
Zone C
• Calculate demand from zone devices to set the AHU temperature
• Eliminates over-cooling
• Effect of too much cooling can be hidden by re-heat valves
8. Set Boiler and Chiller Resets by Demand
Zone A
Boiler
Air Handling
Unit (AHU) Zone B
Chiller
Zone C
• Reset boiler and chiller temperatures based on AHU valve positions
• Protects against excessively hot or cold water, and machine cycling
9. Bonus Tip: Night Ventilation
• Save energy by pre-cooling
the building using outside air
at night
28. What is Pulse™ compatible with?
DDC/BAS Energy Meters Database
• Any meter or system that is Modbus or BACnet compatible.
• Any meter or system that can produce a KYZ pulse.
• Any data source that can transfer data through the internet.
29. Summary of Hints and Tips
• Inspect heating and cooling valves annually
• Check mixing dampers seasonally
• Calculate fresh air requirements automatically
• Calculate demand from zone devices to set the AHU temperature
• Reset boiler and chiller temperatures based on AHU valve positions
• Save energy by pre-cooling the building using outside air at night
30. Add Fresh Air Control
• Automatically calculate the
fresh air requirements
• Protects against excess
heating or cooling
• Can be hidden by the action
of heating and cooling valves
31. Set AHU Supply Temperatures by Zone
Zone A
Boiler
Air Handling
Unit (AHU) Zone B
Chiller
Zone C
• Calculate demand from zone devices to set the AHU temperature
• Eliminates over-cooling
• Effect of too much cooling can be hidden by re-heat valves
36. Set AHU Supply Temperatures by Zone
Zone A
Boiler
Air Handling
Unit (AHU) Zone B
Chiller
Zone C
• Calculate demand from zone devices to set the AHU temperature
• Eliminates over-cooling
• Effect of too much cooling can be hidden by re-heat valves
39. Thank you!
Additional questions?
Contact Pulse Energy at: 1-877-331-0530 or at
info@pulseenergy.com
Look for future and archived webinars on our website:
www.pulseenergy.com/resources/webinars