2. Metallic shaving (irony and notirony, various length and
dimension)
Material to be vacuumed
Lubricant/cooling liquid
Processing waste (grinding
powder, sheet cutting scrap , etc)
Presence of large size machinery
Frequent handling (manual and assisted)
including bulky loads
Steady presence of oily mist, mainly near
the machinery during processing stage.
Work environment features
3. Main applications:
Cleaning of machining cab / worktop
Cleaning of workpiece before/after processing
(eventually joint to compressed air)
Cleaning of the surface close to the working/
preparing area
Emptying of residual oil/sludge tank
Collecting of the vacuumed
recovering/disposal operations.
material
for
4. Critical points:
Mechanical abrasion by shavings.
Chemical attack by oil/oily mist.
Impact on the machine by the moving loads.
RIBO fore points:
Full steel/aluminium execution, NO PLASTIC
PARTS
High resistance to the chemical/mechanical
action of the vacuumed material (same
execution even on the accessories).
Specific oil/abrasion proof compound on the
hosiery.
Contact between the vacuumed material and
the filter.
Full-shield cyclone separator (fully built in the
machine body), avoiding any contact between
solid/liquid material and filter.
High Specific Gravity of the vacuumed
material (accumulation of heavy material into
the collection container).
Reinforced structure
weight-resistance)
Limited time to carry maintenance operations
out
(usually
within
machinery
setup
operations).
Use in narrow spaces.
(higher
impact
and
High reliability and performance keeping over
the time: full schedule respect of the required
vacuuming operations.
Compact size: suitable to be positioned close
to the machine without exceeding the
compulsory Operator’s platform size (80cm as
per EEC regulations)