Market Place SEIMED/EEN: exposición de ofertas, demandas tecnológicas y búsquedas de socios para proyectos europeos.

1. MARKET PLACE
¡Encuentra tus socios!
Envíanos las referencias que te interesen y te ponemos en contacto: seimed@redit.es
La Enterprise Europe Network (EEN) es una red apoyada por la Comisión Europea y a la que pertenecen cerca de 600 entidades agrupadas en regiones.
Está presente en más de 50 países y proporciona servicios gratuitos a las pymes para mejorar su competitividad mediante la innovación, internacionalización y cooperación tecnológica y empresarial.
SEIMED es la sub-red de la EEN que proporciona estos servicios a las empresas de la Comunidad Valenciana y Región de Murcia.
Si quieres que publiquemos tu perfil tecnológico en nuestra base de datos, para que sea accesible a todas las entidades de la EEN y así sus empresas clientes puedan interesarse en colaborar contigo, dínoslo y te indicaremos el procedimiento.
Más información en: www.enterprise-europe-network.ec.europa.eu / www.seimed.eu

2. EXPERTISE IN CROP RESEARCH AND SUSTAINABLE PRODUCTION OF PLANT-BASED RAW MATERIALS FOR A BIOBASED ECONOMY SUBSTITUTING FOSSIL RESOURCES
13 DE 1380 3RRH
A small German research and consultancy enterprise provides expertise in sustainable agriculture and alternative crops for plant-based raw materials to substitute fossil resources. They offer crop research and support in business development. The SME is mainly looking for technical or commercial co operations with need for technical assistance.
BIODEGRADABLE MATERIALS FOR THE SEA
TRDE20140129001
A German University aims at re-establishing natural seagrass meadows by installing an artificial one that creates suitable hydrodynamic conditions for seagrass settlement. The artificial seagrass should biodegrade after a given time as the long term aim is to have a purely natural seagrass meadow. The project will be a joint effort of ecologists, hydrodynamicists and material developers. The sought partner should be interested to devolop the required material and/or explore new business avenues.
SEPARATION AND RECOVERY OF PLASTIC FOILS AND OTHER THIN LIGHTWEIGHT MATERIALS FROM RECYCLING WASTE STREAMS
13 DE 1067 3RXK
A German university together with an engineering company has developed the fully automated technology. Based on the principal of low and excess pressure it is realized by a unit of two rotating drums, each with one sucking and one blowing zone and a gap between them. It can easily be added to existing waste sorting plants. Partners in waste sorting/recycling are sought for technical cooperation.
AN INNOVATIVE TECHNOLOGY/PROCESS IS SOUGHT FOR RECYCLING POLLUTED EXPANDED POLYSTYRENE
12 FR 37M3 3QOH
A French company, regional key player on environmental activities (household garbage, industrial waste collection and treatment) wants to develop new ways of valorization of polystyrene waste.
The objective is to obtain at the end of the process crystal polystyrene with the highest purity and with the highest transparency.
Partners (industrial or academics ones) with proven expertise and technology ready-to-use are sought through a commercial agreement with technical assistance.

3. ECO FRIENDLY BUILDING MATERIALS WITH MINERAL WASTE
12 RO 662C 3RHD
A Technical University from Romania is looking for research partners in the field of Waste Management. The research involves the reuse of industrial wastes in the development “green” building materials. Blended cements with low carbon footprint and with no negative impact on the environment will be designed and manufactured. The partners sought are SMEs and R&D performers in the field of Waste Management for Technical cooperation or interested in European/International R&D Programs.
SEEKING TECHNOLOGY FOR THREE-LAYER PLASTIC CONTAINER PRODUCTION
12 LT 57AB 3R9T
SME from Lithuania working in the field of various plastic products production is looking for technology for three-layer plastic containers production. The company wants to implement the searched technology in its production process.
EXPERTISE IN SUPPLYING AND FABRICATING PRODUCTS USING ADVANCED FLEXIBLE LOW DENSITY PLASTIC MATERIAL
TRUK20130829001
A UK SME is seeking a supplier and/or manufacturer of advanced low density plastic material.
The material should be suitable for the production of lightweight, waterproof insulation garments.
A TECHNOLOGY TO PRODUCE SMALL TRANSPARENT CYLINDRICAL BOX MADE OF PLASTIC MULTILAYERED MATERIAL IS REQUESTED
11 IL 80ER 3MIY
An Israeli company is looking for a technology to produce cylindrical box of transparent plastic material. Ideally, the box should both prevent from oxygen penetration inside and to be composed of several (min. 4) layers. The box volume should be less than 1 Litre. The technology requested can either be at the laboratory stage or fully developed.

4. ADVANCED DECAPSULATION OF PLASTIC DEVICE PACKAGES WITH COPPER BOND WIRES
13 GB 77dz 3S30
An Israeli company is looking for a technology to produce cylindrical box of transparent plastic material. Ideally, the box should both prevent from oxygen penetration inside and to be composed of several (min. 4) layers. The box volume should be less than 1 Litre. The technology requested can either be at the laboratory stage or fully developed.
ECO-FRIENDLY PLASTICIZER (NON-PHTHALATE PLASTICIZER) DEVELOPMENT
TRKR20130916001
A Korean company manufacturing Plasticizers, Amino Acid for fertilizers, Surfactants/Emulsifiers for agrochemicals and pesticides is looking for eco-friendly plasticizer development that have excellent reactivity, plasticity and characteristic(cold resistance, heat resistance) than existing phthalate plasticizer.
SEEKING ECO-FRIENDLY PLASTIC MANUFACTURER FOR MEDICINAL TOOTHPASTE PACKAGING
TRUK20140303002
A UK start-up is seeking manufacturing partners that can provide BPA-free toothpaste tubes for the development of a biologically active herbal toothpaste. The parnter should be able to deliver eco-friendly plastic packaging that is Bisphenol A (BPA) free and will not harm the active compounds in the medicinal toothpaste. Preferably the partner would have experience of, or be currently producing, similar tubes.
COMPLEX TECHNOLOGY OF METALISED PLASTIC ELEMENTS PRODUCTION
TRPL20130805001
The SME from North-East Poland producing high quality solvents, paints and varnishes for coating plastics and furniture, looks for a complex technology of metalised plastic elements production. The searched solution should improve the quality and resistance to wear of manufactured elements, reduce the production time, material use and costs. The company is interested in technical cooperation.
SEEKING FOR A NEW COMPOSITE PIPE THAT CAN BEAR THE INNER PRESSURE LARGER THAN 50 MP
TRCN20140107001
A medium-sized Chinese pipe manufacturer is looking for a type of composite pipe that can bear the internal pressure larger than 5MP used in water, gas and oil transportation. The corporation can be realized by introduction of team with technology or license or product.

5. NOVEL MATERIALS OR SURFACE TECHNOLOGIES THAT CAN SIGNIFICANTLY LOWER THE COEFFICIENT OF FRICTION BETWEEN THE SKIN SURFACE AND A PERSONAL CARE DEVICE
13 GB 4103 3SOX
An East of England based company working on behalf of a multinational is seeks the materials. They are interested in early stage developments as well as solutions that are close to entering or already in the market. Assistance would involve collaborative research and development and a joint route to market.
LOOKING FOR A STRATEGIC PARTNER TO MANUFACTURE AN INNOVATIVE SLIDER PACKAGING FOR MEDICINES WITH CHILD RESISTANT SYSTEM
11 FR 33j6 3NL9
A French SME specialised in medical packaging has developed and patented a child-resistant and senior friendly packaging for medicine blisters. The packaging received the highest child protection level from a famous US laboratory. The SME is looking for a partner operating in the production of customized packaging for the pharmaceutical industry. This partner must be interested in the design and development of a packaging line dedicated to the production and blister filling of this packaging.
NEW MATERIAL TO REPLACE BRASS WIRE
TRFR20131010001
A South West France SME is looking for a partner which could provide or develop a new wire responding to specific characteristics to replace brass wire. The company is ready for all kinds of cooperation that would allow it to obtain such new wire: research, technical cooperation, license agreement…
NOVEL PLASTICS AND BIO-BASED MATERIALS SOUGHT FOR THE DESIGNER INDUSTRY
13 NL 60AH 3SSA
A Dutch company is specialized in the implementation of recyclable and sustainable plastics and ecological friendly bio-based materials. Its ambition is to optimize the use of these novel materials for a variety of innovative processes and designer projects. The company is looking for new materials (e.g. novel plastics, polymers and bio-based materials) as well as processing techniques.

6. EQUIPMENT FOR PLASTIC FORMING OF METALS
TRPL20131121002
Manufacturer from North-East Poland specialised in the production of post boxes and cable boxes is looking for innovative technology for cutting special shapes from the thin sheet metal. The technology should be fully developed and ready to use. Company is interested in license agreement.
IMPROVING THE DRYING AND CURING PROCESS OF LATEX BASED FINISHING COATINGS ON THERMOPLASTIC BASED SUBSTRATES
TRUK20131119003
The UK branch of a manufacturing business of commercial products is looking for ways to improve the drying and curing of latex based finishing on temperature sensitive thermoplastics. Various energy transfer, heating and protection from heating solutions will be considered. The company has capacity for joint further development, incl under license.
GLASS FIBER REINFORCEMENTS POST MAKING PROCESS CUTTINGS
12 LT 57AB 3R4K
Lithuanian SME, manufacturer of glass fiber reinforcements, is looking for the solution of utilization or further appliance of the postmaking process’s cuttings. It has glass fiber reinforcement’s strips of different width (20 – 100 mm) and length (1 – 10 m). The SME is interested in license agreement, technical cooperation and/or commercial agreement.
MODIFICATION OF MECHANICAL AND HEAT PROPERTIES OF SOFTENED PVC
TRCZ20130701002
A Czech SME is looking for new technology to modify mechanical and heat properties of softened PVC produced from recycled cables. Modified PVC will be used for the production of drain covers or other mechanically loading products. The company is interested in commercial agreement with technical assistance.
PUNCHING OF COMPOSITE AEROGEL INSULATION MATERIAL INTO BEAD-LIKE PARTICLES SUITABLE FOR BLOWING
TRUK20130718001
A large Scottish SME specialist in insulation materials requires their composite aerogel material to be converted into bead-like particles suitable for installation via blowing, as is the case with conventional cavity fill insulation. They are seeking partners involved in manufacturing, recycling, chipping/shredding, punching or cut outs for technical cooperation, license or manufacturing agreements.

7. SEEKING INNOVATIVE PACKAGING FILMS FOR THE FOOD INDUSTRY
TRIE20130902001
An Irish manufacturing company, printing, laminating and converting for mainly the food industry is sourcing new innovative products or technologies. Selling films into meat/ cheese/frozen foods and ready-made meals. It can print flavoured coatings and heat seal coatings onto flexible films. The company is looking for partners interested in licensing agreements.
COEXTRUSION LINE – TECHNOLOGY FOR HIGHLY FILLED POLYMER COMPOSITE DEVELOPMENT
13 CZ 0744 3RP5
A Czech company focused on research and development of membrane technologies is looking for a combined line to use for a research, development and preparing samples or prototypes of highly filled composites or polymers in flat sheet and tubular form, by monolayer or multilayer extrusion or in combination with lamination. The company is looking for partners for commercial agreement with technical assistance.