3. Introduction
1
SERVYECO aims to contribute through an efficient and committed use of
our knowledge and technology to preserving nature, improving productive
processes and guaranteeing the environmental health of our clients.
Our main activity is focused on integral
wastewater management.
Current facilities are extended through
7000 m2 in Alcora (Castellón).
SERVYECO was constituted in 1998.
Most Valuable Points
Reach
Customers
Demand
Permanent
Improvement
Costs
Optimization
Confidence
and
Efficiency
8. Equipments and Plants.
2
Industrial Water Treatment.
Reverse Osmosis, Nanofiltration
Advance Photo - Oxidation
Sand Filters, Rings, etc
Demineralization
Pilot Plants
9. Environmental Services
2
Microbiological and Physic-Chemical Laboratory
• Water Analysis.
• Sludge and Ground Analysis.
• Atmospheres and Surfaces Analysis.
• Food Analysis.
10. 2
Environmental Services
Preservation and maintenance.
• Global management of wastewater treatment plants, cooling circuits and process
wastewater.
• Technical support based on wastewater treatment, including process and dumping
wastewater.
• Research projects focused on start up and optimization procedures of wastewater
treatment.
Environmental Hygiene.
• Integrated programs for prevention and control of Legionellosis.
• Analysis and control of surfaces and ambient.
11. R&D Projects
3
Development and implementation of innovative biotechnology
focused on integrated Legionella prevention.
A novel biocide reagent was fruitfully synthesized. It combined an oxidant and non-oxidant
compounds, synergistically improving advantages offered by them.
Increased biocide efficiency compared to widely used common chemicals.
Synergistic interaction, extending the biocide activity.
Decrease of required dosage quantities. This way, containers and generated
waste are also greatly reduced.
12. R&D Projects
3
LIFE07 ENV/E/000794
Risk reduction to public health from environmental sources using
biotechnology in the textile sector.
The
project aims to resolve the Legionella
pneumophila bacteria problem in the textile sector.
Biotechnology will be used in order to test pilot
purification and disinfection schemes on standing
water
that
normally
feeds
these
at-risk
installations.
Complete
wastewater
treatment
system,
including control and prevention.
Oxidative techniques combination, enhancing the
biocide efficiency.
Heavy costs reduction, related to the system
maintenance.
Environmentally friendly technique, limiting the
chemical products addition.
13. R&D Projects
3
Bio-monitoring and Automatic Microbiological Contamination Control System of Industrial Hydraulic Circuits
BIOMOMI - LIFE11 ENV/ES/552
Main Objective.
Industrial-scale prototype construction in order to validate and demonstrate a new
technology that allows real time monitoring and quantifying of aerobic
microorganisms present in hydraulic system water, including subsequent correct dosage
and constant optimisation of biocide treatment.
Environmental and Technical Advantages.
Systematic storage of collected analytical data.
Biocide Chemicals
Optimal dose of oxidizing and non-oxidizing
Data Storage
Prototype
biocides.
Experimental quantification of aerobic
Dosage
Unit
microorganisms.
Control
Unit
Communication Software
Chemicals
Sampling
Dose
Hydraulic Circuit
14. ADNATUR
3
LIFE12 ENV/ES/000265
R&D Projects
Demonstration of natural coagulant use advantages in physical & chemical treatments in industry and urban waste water
Main Objective.
Validation,
assessment
and
industrial
demonstration
of
a
new
environmentally friendly technology, based on natural products, in primary
treatment of wastewaters, at urban and industrial level. Two wastewater
treatment industrial-scale prototype plants will be designed, assembled,
and tuned in order to put it into operation in different real end-users facilities.
Environmental and Technical Advantages.
Owing to its strong cationic character, present an improved coagulating
action.
It does not consume the alkalinity of the water system. Presents very high
efficiency through a wide range of pH, between 4.5 and 9.0.
It is not corrosive or toxic, favouring biological processes and protecting
against corrosion of metallic parts, not increasing the conductivity.
Eliminates or reduces almost completely the use of alkalizing agents such as
sodium or calcium hydroxide.
By not providing toxic elements, promotes sludge dehydration and reuse
15. ECOTAN Series
3
Natural organic polymer with cationic
character.
Extract from the bark of Black Acacia (Acácia
mearnsii de wild).
Coagulating action treating colloidal systems,
neutralizing the charges and bringing together
the particles in suspension.
Do not affect the pH of the system and has an
effective range of 4.5 to 9.0.
Do not consume the alkalinity of the medium.
Its coagulant efficiency is always optimal
because does not suffer hydrolysis in solution.
16. ECOTAN Series
3
Competitive advantages.
Rapid flocculation and decantation. Greatly reduces flocculants
consumption.
Protects against corrosion of metallic parts, not increasing the
conductivity.
It is liquid, ready to use, not requiring previous dilution or
mixtures.
Improves the cost / benefit respect to other inorganic or
synthetic coagulants.
It is an organic based polymer, environmentally friendly. Not
corrosive nor toxic, favors biological processes.
Eliminates or reduces almost completely the use of alkalizing
agents such as sodium or calcium hydroxide.
By not providing toxic elements, promotes sludge dehydration
and reuse.