Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia)

Find Industry reports, Company profiles
ReportLinker and Market Statistics

>> Get this Report Now by email!

Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices
2010 (South Korea, Japan and Australia)
Published on December 2009

Report Summary

In 2008, the Asia-Pacific market for dental prosthetics (crowns, bridges and dentures) was valued at over US$6 billion. The
Asia-Pacific market includes Australia, Japan and South Korea. The aging population and greater demand for aesthetic dentistry are
driving forces in the prosthetics market. The global economic crisis, which began in 2008, has led to a slowdown in the overall market;
however, the market is expected to grow over the forecast period, reaching US$7.2 billion by 2015.

This market includes:

- Crowns and bridges
- Dentures
- Dental alloys and porcelain powder
- Computer aided design/computer aided manufacture (CAD/CAM) systems

The Japanese market for dental prosthetics was the largest in terms of both unit volume and market value, as it accounted for
approximately 80% of the total Asia-Pacific market.

All-ceramic prosthetic devices made using CAD/CAM technology are quickly gaining market share at the expense of conventionally
fabricated devices. Although the economic recession has constrained patients' discretionary incomes and limited the crowns and
bridges market, the market for all-ceramic restorations is expected to quickly re-establish growth following the economic recovery.

The Asia-Pacific dental prosthetics market includes many local players such as: Addens, Ceracys, Dentaim and Renis in South
Korea; GC in Japan; and Stoneglass in Australia. This report provides a comprehensive and detailed analysis of market revenues by
device type, market forecasts through 2015, unit sales, average selling prices, market drivers and limiters and a detailed competitive
analysis, including manufacturer market shares and product portfolios.

Table of Content

TABLE OF CONTENTS.......I

LIST OF FIGURES VII

LIST OF CHARTS..... 1

EXECUTIVE SUMMARY... 1

1.1 OVERVIEW: ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS....... 1
1.2 TREND ANALYSIS BY COUNTRY 2

Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia) Page 1/13


1.3MARKET FOR CROWNS AND BRIDGES .. 3
1.4MARKET FOR DENTURES 4
1.5MARKET FOR CAD/CAMSYSTEMS ..... 5
1.6 LEADING COMPETITORS IN THE DENTAL CAD/CAMMARKET 6

RESEARCH METHODOLOGY...... 7

2.1 RESEARCH SCOPE ......... 7
2.2 IDATA'S 9-STEP METHODOLOGY ......... 7
Step 1: Project Initiation & Team Selection ...... 8
Step 2: Prepare Data Systems and Perform Secondary Research........ 9
Step 3: Preparation for Interviews & Questionnaire Design .. 10
Step 4: Performing Primary Research 11
Step 5: Research Analysis: Establishing Baseline Estimates .. 13
Step 6: Market Forecast and Analysis 13
Step 7: Identify Strategic Opportunities .......... 15
Step 8: Final Review and Market Release ....... 16
Step 9: Customer Feedback and Market Monitoring.. 17

INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS........ 18

3.1 INTRODUCTION 18
3.2 CROWNS AND BRIDGES. 18
3.2.1 Crowns....... 18
3.2.2 Bridges....... 19
3.2.3 Material Types ...... 19
3.2.3.1 Full-Cast Crowns and Bridges 19
3.2.3.2 Porcelain-Fused-to-Metal: Semi-Precious and Precious Alloys..........19
3.2.3.3 Porcelain-Fused-to-Metal: Non-Precious Alloys.........20
3.2.3.4 All-Ceramic Devices.....20
3.2.3.5 Hard-Resin Material.....20
3.3 INLAYS AND ONLAYS . 20
3.3.1 Material Types ...... 21
3.3.1.1 Gold ......21
3.3.1.2 Porcelain .........21
3.3.1.3 Composite Resin 21
3.4 DENTURES........ 21
3.4.1 Full Dentures ........ 21
3.4.2 Partial Dentures ... 22
3.5MANUFACTURING PROCESS AND TECHNOLOGICAL DEVELOPMENTS 22
3.5.1 Conventional Fabrication.. 22
3.5.2 CAD/CAM Technology ...... 22
3.5.3 Three-Dimensional Printing ......... 23
3.5.4 Digital Impression-Taking. 23

ASIA-PACIFIC MARKETS FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS.... 25

4.1 INTRODUCTION 25
4.2 CURRENCY EXCHANGE RATE.. 26



4.3MARKET ANALYSIS AND FORECAST .. 27
4.4MARKET BY SEGMENT 29
4.4.1 Market for Crowns and Bridges ... 29
4.4.2 Market for Dentures 35
4.4.3 Market for CAD/CAM Systems ..... 38
4.4.3.1 Market for Full In-Lab CAD/CAM System......41
4.4.3.2 Market for Standalone In-Lab Scanner CAD/CAM Systems ...43
4.4.3.3 Market for Chairside Systems..45
4.5 DRIVERS AND LIMITERS .......... 47
4.5.1 Drivers and Limiters for Dental Prosthetics ........ 47
4.5.1.1 Market Drivers.47
4.5.1.2 Market Limiters .48
4.5.2 Drivers and Limiters for CAD/CAM Systems ....... 49
4.5.2.2 Market Limiters .50
4.6 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS.. 52
4.7MERGERS AND ACQUISITIONS . 56
4.7.1 3M Acquired Brontes Technologies Inc..... 56
4.7.2 Straumann Acquired etkon AG ..... 57
4.8MARKET HIGHLIGHTS. 58
4.8.1 Nobel Biocare's Debut of NobelProcera® Scanner 58
4.8.2 Wieland's Introduction of ZENOTEC® T1 Milling System 58
4.8.3 Sirona Releases Digital Impression Taking System ' CEREC® Bluecam . 58
4.8.4 3M's Lava' Chairside Oral Scanner (C.O.S.).... 58

COUNTRY PROFILES...... 60

5.1 INTRODUCTION 60
5.1.1 Population.. 60
5.1.2 Median Age 60
5.1.3 GDP Per Capita.... 60
5.1.4 Crowns and Bridges Placed Per 10,000 Inhabitants......... 61
5.1.5 Price Index. 61
5.2 SOUTH KOREA . 62
5.3 JAPAN.. 63
5.4 AUSTRALIA ...... 64
5.5 DENTISTS PER CAPITA BY COUNTRY.. 65

SOUTH KOREAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS.... 66

6.1 INTRODUCTION 66
6.2 TOTAL MARKET FOR DENTAL PROSTHETICS .. 68
6.2.1 Market Analysis and Forecast ...... 68
6.3MARKET FOR CROWNS AND BRIDGES 72
6.3.1.1 Market for Porcelain-Fused-To-Metal Devices.75
6.3.1.2 Market for Full-Cast Devices ..80
6.3.1.3 Market for All-Ceramic Devices81
6.4MARKET FOR DENTURES ......... 83



6.4.1.1 Market for Full Dentures.........86
6.4.1.2 Market for Partial Dentures ....86
6.5 TOTAL MARKET FOR CAD/CAM SYSTEMS .... 88
6.5.1.1 Market for Full In-Lab CAD/CAM Systems ....91
6.5.1.2 Market for Standalone Scanner In-Lab CAD/CAM Systems ...95
6.5.1.3 Market for Chairside Systems..98
6.6 DRIVERS AND LIMITERS ........ 101
6.6.1 Drivers and Limiters for Dental Prosthetics ...... 101
6.6.1.2 Market Limiters ..........103
6.6.2 Drivers and Limiters for CAD/CAM Systems ..... 104
6.6.2.2 Market Limiters ..........105
6.7 COMPETITIVE ANALYSIS FOR CAD/CAM SYSTEMS 107
6.7.1 Competitive Analysis for Full In-Lab CAD/CAM Systems ......... 111
6.7.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM Systems ........ 113

JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAM SYSTEMS115

7.1 INTRODUCTION ......... 115
7.2 TOTAL MARKET FOR DENTAL PROSTHETICS 117
7.2.1 Market Analysis and Forecast .... 117
7.3.1.1 Market for Porcelain-Fused-To-Metal Devices..........124
7.3.1.2 Market for Full-Cast Devices 129
7.3.1.3 Market for All-Ceramic Devices.........130
7.3.1.4 Market for Hard-Resin Devices..........132
7.4MARKET FOR DENTURES ....... 134
7.4.1.1 Market for Full Dentures.......137
7.4.1.2 Market for Partial Dentures ..137
7.5 TOTAL MARKET FOR CAD/CAM SYSTEMS .. 139
7.5.2 Full In-Lab CAD/CAM Systems.. 142
7.5.3 Standalone Scanner In-Lab CAD/CAM Systems 145
7.5.4 Chairside Systems . 148
7.6.1.2 Market Limiters ..........152
7.6.2.2 Market Limiters ..........154
7.7.1 Competitive Analysis for Full In-Lab CAD/CAM Systems ......... 161
7.7.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM Systems ........ 163



AUSTRALIAN MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS.. 165

8.1 INTRODUCTION ......... 165
8.2 TOTAL MARKET FOR DENTAL PROSTHETICS 167
8.3.1.1 Market for Porcelain-Fused-To-Metal Devices..........174
8.3.1.2 Market for Full-Cast Devices 179
8.3.1.3 Market for All-Ceramic Devices.........181
8.4MARKET FOR DENTURES ....... 183
8.4.1.1 Market for Full Dentures.......186
8.4.1.2 Market for Partial Dentures ..186
8.5 TOTAL MARKET FOR CAD/CAM SYSTEMS .. 188
8.5.2 Full In-Lab CAD/CAM Systems.. 190
8.5.3 Standalone Scanner In-Lab CAD/CAM Systems 193
8.5.4 Chairside Systems . 196
8.6.1.2 Market Limiters ..........201
8.6.2.2 Market Limiters ..........203
8.7.1.1 Competitive Analysis for Full In-Lab CAD/CAM Systems ....210
8.7.1.2 Competitive Analysis for Standalone Scanner In-Lab CAD/CAM System ....212
8.7.1.3 Competitive Analysis for Chairside CAD/CAM systems .......214

ABBREVIATIONS. 216

LIST OF FIGURES

EXECUTIVE SUMMARY. 1
RESEARCH METHODOLOGY.... 7
INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS.... 18
SYSTEMS ..... 25
Figure 4-1: Exchanges Rates for the U.S. Dollar, 2008..... 26
Figure 4-2: Asia-Pacific Markets for Dental Prosthetics, 2005 ' 2015 (US$) ....... 28
Figure 4-3: Crowns and Bridges Segmented by Material Type, Asia-Pacific,
2005 ' 2015... 30
Figure 4-4: Crown and Bridge Units Segmented by Material Type, Asia-Pacific,
2005 ' 2015... 31
Figure 4-5: Asia-Pacific Market for Crowns and Bridges, 2005 ' 2015 (US$) ...... 33
Figure 4-6: Dentures Segmented by Type, Asia-Pacific, 2005 ' 2015 ....... 35
Figure 4-7: Market for Dentures Segmented by Type, Asia-Pacific, 2005 ' 2015 36



Figure 4-8: Market for Dentures, Asia-Pacific, 2005 ' 2015 (US$) 36
Figure 4-9: Market for CAD/CAM Systems, Asia-Pacific, 2005 ' 2015 (US$) ..... 39
Figure 4-10: Market for Full In-Lab CAD/CAM Systems, Asia-Pacific,
2005 ' 2015 (US$)...... 42
Figure 4-11: Market for Standalone Scanner In-Lab CAD/CAM Systems, Asia-
Pacific, 2005 ' 2015 (US$) .... 44
Figure 4-12: Market for Chairside CAD/CAM Systems, Asia-Pacific,
2005 ' 2015 (US$)...... 46
Figure 4-13: Market Drivers and Limiters for Dental Prosthetics, South Korea,
2008 ... 49
Figure 4-14: Market Drivers and Limiters for CAD/CAM Systems, 2008.. 51
Figure 4-15: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific,
2008 ... 54
Figure 4-16: Leading Competitors, CAD/CAM Systems, Asia-Pacific, 2008 ........ 55
COUNTRY PROFILES ... 60
Figure 5-1: Price Index, Asia-Pacific, 2008 ........ 61
Figure 5-2: Country Indicators, Asia-Pacific, 2008 .......... 61
Figure 5-3: Dentists Per Capita by Country, Asia-Pacific, 2008... 65
SYSTEMS ..... 66
Figure 6-1: Total Market for Dental Prosthetics, South Korea, 2005 ' 2015
(US$) . 69
Figure 6-2: Total Market for Dental Prosthetics, South Korea, 2005 ' 2015
(KRN') ........ 70
Figure 6-3: Market for Crowns and Bridges, South Korea, 2005 ' 2015 (US$)..... 72
Figure 6-4: Market for Crowns and Bridges, South Korea, 2005 ' 2015 (KRN') 73
Figure 6-5: Crowns and Bridges Segmented by Material Type, South Korea,
2005 ' 2015... 76
Figure 6-6: Market for PFM Devices, South Korea, 2005 ' 2015 (US$) .... 78
Figure 6-7: Market for PFM Devices, South Korea, 2005 ' 2015 (KRN') 78
Figure 6-8: Market for Full-Cast Devices, South Korea, 2005 ' 2015 (US$) ........ 80
Figure 6-9: Market for Full-Cast Devices, South Korea, 2005 ' 2015 (KRN') .... 81
Figure 6-10: Market for All-Ceramic Devices, South Korea, 2005 ' 2015 (US$).. 82
Figure 6-11: Market for All-Ceramic Devices, South Korea, 2005 ' 2015
(KRN') ........ 82
Figure 6-12: Dentures Segmented by Type, South Korea, 2005 ' 2015 ..... 84
Figure 6-13: Market for Dentures, South Korea, 2005 ' 2015 (US$) ......... 85
Figure 6-14: Market for Dentures, South Korea, 2005 ' 2015 (KRN') .... 85
Figure 6-15: Market for Dentures Segmented by Type, South Korea,
2005 ' 2015... 87
Figure 6-16: Market for CAD/CAM Systems, South Korea, 2005 ' 2015
(KRN' and US$) ....... 89
Figure 6-17: Market for Full In-Lab CAD/CAM Systems, South Korea,
2005 ' 2015 (US$)...... 93
Figure 6-18: Market for Full In-Lab CAD/CAM Systems, South Korea,
2005 ' 2015 (KRN') . 93
Figure 6-19: Market for Standalone Scanner In-Lab CAD/CAM Systems,
South Korea, 2005 ' 2015 (US$)......... 96
South Korea, 2005 ' 2015 (KRN') .... 96



Figure 6-21: Market for Chairside CAD/CAM Systems, South Korea,
2005 ' 2015 (US$)...... 99
Figure 6-22: Market for Chairside CAD/CAM Systems, South Korea,
2005 ' 2015 (KRN') . 99
Figure 6-23: Market Drivers and Limiters for Dental Prosthetics, South Korea,
2008 . 103
Figure 6-24: Market Drivers and Limiters for CAD/CAM Systems, 2008 106
Figure 6-25: Leading Competitors, In-Lab CAD/CAM Systems, South Korea,
2008 . 108
Figure 6-26: Leading Competitors, CAD/CAM Systems, South Korea, 2008...... 110
Figure 6-27: Leading Competitors, Full In-Lab CAD/CAM Systems,
South Korea, 2008 .... 112
Figure 6-28: Leading Competitors, Standalone Scanner In-Lab CAD/CAM
Systems, South Korea, 2008. 114
JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS ... 115
Figure 7-1: Total Market for Dental Prosthetics, Japan, 2005 ' 2015 (US$) ....... 119
Figure 7-2: Total Market for Dental Prosthetics, Japan, 2005 ' 2015 (JPY¥) ..... 120
Figure 7-3: Market for Crowns and Bridges, Japan, 2005 ' 2015 (US$) .. 122
Figure 7-4: Market for Crowns and Bridges, Japan, 2005 ' 2015 (JPY¥) 122
Figure 7-5: Crowns and Bridges Segmented by Material Type, Japan,
2005 ' 2015. 125
Figure 7-6: Market for PFM Devices, Japan, 2005 ' 2015 (US$) . 127
Figure 7-7: Market for PFM Devices, Japan, 2005 ' 2015 (JPY¥) 127
Figure 7-8: Market for Full-Cast Devices, Japan, 2005 ' 2015 (US$) ..... 129
Figure 7-9: Market for Full-Cast Devices, Japan, 2005 ' 2015 (JPY¥) .... 130
Figure 7-10: Market for All-Ceramic Devices, Japan, 2005 ' 2015 (US$) .......... 131
Figure 7-11: Market for All-Ceramic Devices, Japan, 2005 ' 2015 (JPY¥) ........ 131
Figure 7-12: Market for Hard-Resin Devices, Japan, 2005 ' 2015 (US$) 132
Figure 7-13: Market for Hard-Resin, Japan, 2005 ' 2015 (JPY¥) . 133
Figure 7-14: Market for Dentures, Japan, 2005 ' 2015 (US$) .... 135
Figure 7-15: Market for Dentures, Japan, 2005 ' 2015 (JPY¥)... 135
Figure 7-16: Market for Dentures by Type, Japan, 2005 ' 2015. 136
Figure 7-17: Market for Dentures Segmented by Type, Japan, 2005 ' 2015 ....... 138
Figure 7-18: CAD/CAM Systems, Japan, 2005 ' 2015 (JPY¥ and US$) .. 140
Figure 7-19: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 ' 2015
(US$) .......... 143
Figure 7-20: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 ' 2015
(JPY¥)......... 143
Figure 7-21: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,
2005 ' 2015 (US$).... 146
Figure 7-22: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,
2005 ' 2015 (JPY¥) .. 146
Figure 7-23: Market for Chairside CAD/CAM Systems, Japan, 2005 ' 2015
(US$) .......... 149
Figure 7-24: Market for Chairside CAD/CAM Systems, Japan, 2005 ' 2015
(JPY¥)......... 149
Figure 7-25: Market Drivers and Limiters for Dental Prosthetics, Japan, 2008 ... 153
Figure 7-26: Market Drivers and Limiters for CAD/CAM Systems, 2008 156
Figure 7-27: Leading Competitors, In-Lab CAD/CAM Systems, Japan, 2008 ..... 159



Figure 7-28: Leading Competitors, CAD/CAM Systems, Japan, 2008 ..... 160
Figure 7-29: Leading Competitors, Full In-Lab CAD/CAM Systems, Japan,
2008 . 162
Systems, Japan, 2008 164
SYSTEMS ... 165
Figure 8-1: Market for Dental Prosthetics, Australia, 2005 ' 2015 (US$) .......... 169
Figure 8-2: Market for Dental Prosthetics, Australia, 2005 ' 2015 (AUD$) ....... 170
Figure 8-3: Market for Crowns and Bridges, Australia, 2005 ' 2015 (US$)........ 172
Figure 8-4: Market for Crowns and Bridges, Australia, 2005 ' 2015 (AUD$) .... 172
Figure 8-5: Crowns and Bridges Segmented by Material Type, Australia,
2005 ' 2015. 175
Figure 8-6: Market for PFM Devices, Australia, 2005 ' 2015 (US$) ....... 177
Figure 8-7: Market for PFM Devices, Australia, 2005 ' 2015 (AUD$).... 177
Figure 8-8: Market for Full-Cast Devices, Australia, 2005 ' 2015 (US$) 179
Figure 8-9: Market for Full-Cast Devices, Australia, 2005 ' 2015 (AUD$) ........ 180
Figure 8-10: Market for All-Ceramic Devices, Australia, 2005 ' 2015 (US$)..... 181
Figure 8-11: Market for All-Ceramic Devices, Australia, 2005 ' 2015 (AUD$) . 182
Figure 8-12: Market for Dentures, Australia, 2005 ' 2015 (US$). 184
Figure 8-13: Market for Dentures, Australia, 2005 ' 2015 (AUD$)......... 184
Figure 8-14: Dentures Segmented by Type, Australia, 2005 ' 2015 ........ 185
Figure 8-15: Market for Dentures Segmented by Type, Australia, 2005 ' 2015 . 187
Figure 8-16: Market for CAD/CAM Systems, Australia, 2005 ' 2015
(AUD$ and US$) ...... 189
Figure 8-17: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 ' 2015
(US$) .......... 191
Figure 8-18: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 ' 2015
(AUD$) ....... 191
Australia, 2005 ' 2015 (US$). 194
Australia, 2005 ' 2015 (AUD$)......... 194
Figure 8-21: Market for Chairside CAD/CAM Systems, Australia, 2005 ' 2015
(US$) .......... 197
Figure 8-22: Market for Chairside CAD/CAM Systems, Australia, 2005 ' 2015
(AUD$) ....... 197
Figure 8-23: Market Drivers and Limiters for Dental Prosthetics, Australia,
2008 . 202
Figure 8-24: Market Drivers and Limiters for CAD/CAM System, 2008 . 205
Figure 8-25: Leading Competitors, In-Lab CAD/CAM Systems, Australia,
2008 . 208
Figure 8-26: Leading Competitors, CAD/CAM Systems, Australia, 2008 209
Figure 8-27: Leading Competitors, Full In-Lab CAD/CAM Systems, Australia,
2008 . 211
Systems, Australia, 2008...... 213
Figure 8-29: Leading Competitors, Chairside CAD/CAM Systems, Australia,
2008 . 214
ABBREVIATIONS ....... 216



LIST OF CHART S

EXECUTIVE SUMMARY. 1
Chart 1-1: Market for Dental Prosthetics, Asia-Pacific, 2005 ' 2015 (US$) 1
Chart 1-2: Market Value of Dental Prosthetics by Country, 2008... 2
Chart 1-3: Unit Share by Material Type for Crowns and Bridges, Asia-Pacific,
2005 ' 2015..... 3
Chart 1-4: Market for Dentures, Asia-Pacific, 2005 ' 2015 (US$) . 4
Chart 1-5: Market for CAD/CAM Systems, Asia-Pacific, 2005 ' 2015 (US$) ........ 5
Chart 1-6: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific, 2008 .. 6
RESEARCH METHODOLOGY.... 7
INTRODUCTION TO DENTAL PROSTHETICS AND CAD/CAM SYSTEMS.... 18
SYSTEMS ..... 25
Chart 4-1: Combined Markets for Dental Prosthetics, Asia-Pacific, 2005 ' 2015
(US$) . 27
Chart 4-2: Crown and Bridge Units Segmented by Material Type, Asia-Pacific,
2005 ' 2015... 32
Chart 4-3: Market for Crowns and Bridges, Asia-Pacific, 2005 ' 2015, (US$) ..... 34
Chart 4-4: Market for Dentures, Asia-Pacific, 2005 ' 2015 (US$) . 37
Chart 4-5: Overall Market for CAD/CAM, Asia-Pacific, 2005 ' 2015 (US$)........ 40
Chart 4-6: Market for Full In-Lab CAD/CAM Systems, Asia-Pacific,
2005 ' 2015 (US$)...... 42
Chart 4-7: Market for Standalone Scanner In-Lab CAD/CAM Systems,
Asia-Pacific, 2005 ' 2015 (US$) ......... 44
Chart 4-8: Market for Chairside CAD/CAM Systems, Asia-Pacific, 2005 ' 2015
(US$) . 46
Chart 4-9: Leading Competitors, In-Lab CAD/CAM Systems, Asia-Pacific, 2008 54
Chart 4-10: Leading Competitors, CAD/CAM Systems, Asia-Pacific, 2008 ......... 55
COUNTRY PROFILES ... 60
Chart 5-1: Country Statistics, South Korea, 2008 62
Chart 5-2: Country Statistics, Japan, 2008 .......... 63
Chart 5-3: Country Statistics, Australia, 2008 ..... 64
SYSTEMS ..... 66
Chart 6-1: Total Market for Dental Prosthetics, South Korea, 2005 ' 2015 (US$) 71
Chart 6-2: Market for Crowns and Bridges, South Korea, 2005 ' 2015 (US$) ...... 74
Chart 6-3: Crowns and Bridges Segmented by Material Type, South Korea,
2008 .. 77
Chart 6-4: Crowns and Bridges Unit Share by Material Type, South Korea, 2005
' 2015 79
Chart 6-5: Market for Dentures, South Korea, 2005 ' 2015 (US$) . 84
Chart 6-6: Market for Dentures Segmented by Type, South Korea, 2005 ' 2015 . 87
Chart 6-7: Total Market for CAD/CAM Systems, South Korea, 2005 ' 2015
(US$) . 90
Chart 6-8: Market for Full In-Lab CAD/CAM Systems, South Korea,
2005 ' 2015 (US$)...... 94
Chart 6-9: Market for Standalone Scanner In-Lab CAD/CAM Systems,
South Korea, 2005 ' 2015 (US$) ......... 97
Chart 6-10: Market for Chairside CAD/CAM Systems, South Korea, 2005 ' 2015



(US$) .......... 100
Chart 6-11: Leading Competitors, In-Lab CAD/CAM Systems, South Korea,
2008 109
Chart 6-12: Leading Competitors, CAD/CAM Systems, South Korea, 2008 ....... 110
Chart 6-13: Leading Competitors, Full In-Lab CAD/CAM System Units,
South Korea, 2008 .... 112
Chart 6-14: Leading Competitors, Standalone Scanner In-Lab CAD/CAM System
Units, South Korea, 2008 ..... 114
JAPANESE MARKET FOR DENTAL PROSTHETICS AND CAD/CAM
SYSTEMS ... 115
Chart 7-1: Total Market for Dental Prosthetics, Japan, 2005 ' 2015 (US$) ........ 118
Chart 7-2: Market for Crowns and Bridges, Japan, 2005 ' 2015 (US$) ... 123
Chart 7-3: Crowns and Bridges Segmented by Material Type, Japan, 2008 ....... 126
Chart 7-4: Crowns and Bridges Unit Share by Material Type, Japan,
2005 ' 2015 128
Chart 7-5: Market for Dentures, Japan, 2005 ' 2015 (US$) ....... 136
Chart 7-6: Market for Dentures Segmented by Type, Japan, 2005 ' 2015 138
Chart 7-7: Market for CAD/CAM Systems, Japan, 2005 ' 2015 (US$).... 141
Chart 7-8: Market for Full In-Lab CAD/CAM Systems, Japan, 2005 ' 2015
(US$) .......... 144
Chart 7-9: Market for Standalone Scanner In-Lab CAD/CAM Systems, Japan,
2005 ' 2015 (US$).... 147
Chart 7-10: Market for Chairside CAD/CAM Systems, Japan, 2005 ' 2015
(US$) .......... 150
Chart 7-11: Leading Competitors, In-Lab CAD/CAM Systems, Japan, 2008 ...... 159
Chart 7-12: Leading Competitors, CAD/CAM Systems, Japan, 2008....... 160
Chart 7-13: Leading Competitors, Full In-Lab CAD/CAM System Units, Japan,
2008 . 162
Units, Japan, 2008 .... 164
SYSTEMS ... 165
Chart 8-1: Market for Dental Prosthetics, Australia, 2005 ' 2015 (US$) . 168
Chart 8-2: Market for Crowns and Bridges, Australia, 2005 ' 2015 (US$) ......... 173
Chart 8-3: Market for Crowns and Bridges Segmented by Material Type, 2008 . 176
Chart 8-4: Crowns and Bridges by Material Type, Australia, 2005 ' 2015 ........ 178
Chart 8-5: Market for Dentures, Australia, 2005 ' 2015 (US$) .. 185
Chart 8-6: Market for Dentures Segmented by Type, Australia, 2005 ' 2015 ..... 187
Chart 8-7: Market for CAD/CAM Systems, Australia, 2005 ' 2015 (US$) ........ 189
Chart 8-8: Market for Full In-Lab CAD/CAM Systems, Australia, 2005 ' 2015
(US$) .......... 192
Chart 8-9: Market for Standalone Scanner In-Lab CAD/CAM Systems, Australia,
2005 ' 2015 (US$).... 195
Chart 8-10: Market for Chairside CAD/CAM Systems, Australia, 2005 ' 2015
(US$) .......... 198
Chart 8-11: Leading Competitors, In-Lab CAD/CAM Systems, Australia, 2008 . 208
Chart 8-12: Leading Competitors, CAD/CAM Systems, Australia, 2008 . 209
Chart 8-13: Leading Competitors, Full In-Lab CAD/CAM System Units,
Australia, 2008 ......... 211



Units, Australia, 2008 .......... 213
Chart 8-15: Leading Competitors, Chairside CAD/CAM System Units, Australia,
2008 215
ABBREVIATIONS ....... 216



Fax Order Form
To place an order via fax simply print this form, fill in the information below and fax the completed form to:
Europe, Middle East and Africa : + 33 4 37 37 15 56
Asia, Oceania and America : + 1 (805) 617 17 93
If you have any questions please visit http://www.reportlinker.com/notify/contact

Order Information
Please verify that the product information is correct and select the format(s) you require.

Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia)

Product Formats
Please select the product formats and the quantity you require.

Hard Copy--USD 7 995.00 Quantity: _____

1 User License--USD 8 495.00 Quantity: _____

Corporate License--USD 9 995.00 Quantity: _____

Contact Information
Please enter all the information below in BLOCK CAPITALS

Title: Mr Mrs Dr Miss Ms Prof

First Name: _____________________________ Last Name: __________________________________

Email Address: __________________________________________________________________________

Job Title: __________________________________________________________________________

Organization: __________________________________________________________________________

Address: __________________________________________________________________________

City: __________________________________________________________________________

Postal / Zip Code: __________________________________________________________________________

Country: __________________________________________________________________________

Phone Number: __________________________________________________________________________

Fax Number: __________________________________________________________________________



Payment Information
Please indicate the payment method, you would like to use by selecting the appropriate box.

Payment by credit card Card Number: ______________________________________________

Expiry Date __________ / _________

CVV Number _____________________

Card Type (ex: Visa, Amex…) _________________________________

Payment by wire transfer Crédit Mutuel
RIB : 10278 07314 00020257701 89
BIC : CMCIFR2A
IBAN : FR76 1027 8073 1400 0202 5770 189

Payment by check UBIQUICK SAS
16 rue Grenette – 69002 LYON, FRANCE

Customer signature:

Please note that by ordering from Reportlinker you are agreeing to our Terms and Conditions at
http://www.reportlinker.com/index/terms

Please fax this form to:

Europe, Middle East and Africa : + 33 4 37 37 15 56

Asia, Oceania and America : + 1 (805) 617 17 93


Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia)

Recommandé

Recommandé

Contenu connexe

Plus de ReportLinker.com

Plus de ReportLinker.com (20)

Dernier

Dernier (20)

Asia-Pacific Markets for Dental Prosthetics and CAD/CAM Devices 2010 (South Korea, Japan and Australia)