1. MUHAMMAD SAAD KHAN
R-869, Sector 15-A-3 Buffer Zone, Date of Birth: 11/07/1987
Karachi. Phone: +92-21-36992959
Email: saad.khan20432@gmail.com Mobile: +92-3417611759
Objective:
To become a responsible, challenging and competitive intellect by meeting the challenges in a
progressive organization.
SKILL & EXPERTIES:
About 5 years of industrial experience in the field of electrical, instrumentation, and control systems in
commissioning, development, co-ordination, and detailed maintenance of instruments and control
systems of different vendors.
Management
Skills:
-Capable to lead an
in experience team.
-Competent written
and spoken English.
-Highly capable to work in
an intense environment.
- Infatuated to learning and
brisk in analysis.
-Ardor to achieve novelty
in market place.
Technical
Skills:
-Configuration of
PLCs (AC800m,
ABB PEC800
PPD113)
-Trouble shooting
through PLCs
(AC800m,PEC800
PPD113 & S7300)
through
logics(FBD &
Ladder)
-Program modification
through (AC800m &
PEC800 PPD113) (Kaizen)
if required.
-VFDs troubleshooting and
programming of ABB
ACS800 drives based on
DTC.
-ABB ACS800 VFDs
controlling &
parameterization through
Drive Window software.
-capable of maintaining
(R8i,R7i,R5i,R4i,R3i,R2i)
module.
-DCS by ABB PEC series.
WORK EXPERIENCE:
Working in Aisha Steel Mill limited as Assistant Manager. Dated:18th
April 2012
DESCRIPTION:
Aisha steel mill limited incorporated in 2005 is the state of the art cold roll complex and is
engaged in producing 220,000 metric ton per year.
Responsibilities:
Involved in the Commissioning phase of the industry under the supervision of ABB China
Experts especially CRSM (ABB Controlling and Drives) and RGL.
In-charge of CRSM.
Responsible for controlling and troubleshooting of ABB ACS800 Drives based on DTC (Direct
Torque Control) through Drive Window Software which is a tool for monitoring, controlling
and parameterizing of main motors.
Troubleshooting through Control Builder M Professional which is an engineering tool
facilitating the ABB PLC (AC 800PEC) in developing and configuring the logics to be used in
the process of CRSM.
Troubleshooting through Siemens PLC S7300 for smooth running of the controlling in RGL.
Good knowledge of Siemens Vector Control Master Drives.
Observing and analyzing data for Root Cause Analysis through IBA Analyzer when required.
2.
Checking and observing the behavior of Instruments and also take round to check the physical
condition of Instruments installed in different areas of Plant.
Responsible for maintaining the Mill through different Maintenance techniques which include
(Reactive Maintenance, Preventive Maintenance, Predictive Maintenance and Reliability
Centered Maintenance).
Maintain and manage all the cable schedules, manuals and related Technical information
regarding Instruments so that technical conversation can be carried out when raising the MPRs of
any instruments.
Coordination with the ABB expert from China when required.
Responsibilities:
Monitoring the Plant which includes Main crusher, Raw Mill I, II & III, kiln I & II, Coal
Mill, Cement Mill I, II & III through ABB PLC DCS (Distributive Control System).
Attend the complaints and arrange to remove instrument faults at Plant in different areas as
mentioned above.
Coordination with the Production and Mechanical Maintenance team when required.
Routine Checking / Calibration / Replacement Instruments which includes Thermocouples,
RTDs, Pressure Transmitters, Proximity Sensors, Limit switches, Gas analyzers, Weigh
feeders and Pneumatic devices.
Ensure the adherence to the safety standards and take necessary steps for the safety of
equipments to avoid personal incident.
Any other assignment given by H.O.D/Superior authority from time to time.
Education:
[2010] Sir Syed University of Engineering & Technology Karachi. BS Electronic Engineering
[2005] Aga Khan Higher Secondary School, Karachi. Intermediate
[2003] Hamdard Public School, Karachi. Matriculation
Training & Achievements:
Drive window software Training completed under the supervision of ABB
China team during commissioning.
Thickness gauge Training completed under the supervision of Thermo
References:
Will be furnished on demand.
Worked in Power Cement Industry Private limited formerly known as Essa Cement as Trainee
Instrumentation Engineer from December 2010 till April 2012.