Phase 1 and Phase II These project are meant for use the knowledge acquired by the students during the coursework and should contribute to the needs of the society. These projects aims to provide an opportunity of designing and building complete system or subsystems in an area where the student like to acquire specialized skills. Maximum Number of Projects per academic year is 50 Numbers - Including Funded Projects. Selection Process will on first come first serve basis. We Guide projects in the following fields SCADA For Power Systems Automation Wind energy generation and storage system Computation of electric field distribution in a power apparatus. Controller design for grid tie inverter. Grid synchronisation in wind power harnessing. Analysing the needs and options of transmission for renewable energy Analysing Risk in Electricity Market Modelling the impact of electricity price tariffs and smart grids on customer demand Experimental setup of a Microgrid A power flow analysis model for microgrid A control scheme for grid connected wind energy generator Load frequency control of systems. Investigation of DFIG in a Microgrid Study on small signal stability of microgrids Developing techniques for transmission planning. Determination of efficiency of the Permanent Magnet Motors Modeling of wind turbine system for an Interior Permanent magnet generator Condition Monitoring of Power System Equipment Electrical insulation for high-voltage DC systems Congestion management in deregulated power system by optimal choice and allocation of FACTS controllers Dynamic Interaction of Power Plants and Power System in Deregulated Energy Markets ANALYSIS OF REAL POWER ALLOCATION FOR DEREGULATED POWER SYSTEM Analysis of stand – alone operation of single phase induction generator with energy storage system Optimal Relay coordination with Distributed generation Relay coordination with distributed generation Control of Double fed Induction Generator facing grid interruptions Stability improvement of a grid connected Wind energy system Study on grid connected wind driven induction generator under various fault conditions Energy optimized control of induction machines Voltage control of the parallel operated micro hydro synchronous generator and wind driven Induction generator with energy storage On-Line Tape Changing Power Transformer and reduced line voltage disturbance Design & Implementation of digital phase sequence indicator

1. This document contains text automatically extracted from a PDF or image file. Formatting may have
been lost and not all text may have been recognized.
To remove this note, right-click and select "Delete table".

2. EXPERTSYSTEMSANDSOLUTIONS

3. 48, North Street, Aranarai, Perambalur, Tamil Nadu, India.
Email ID: expertsyssol@yahoo.com,
Website: www.researchprojects.info
Phone: 9952749533,
INDUSTRIAL AUTOMATION THROUGH SMS
This project is aimed at developing control of equipments connected to a PC
through SMS. Usually switch control is used to control the electrical equipments. It is
a manual task and a person has to go to the distant place in order to control the
equipment when switch control is located far from easy reach. This inconvenience
can be minimized by using wireless communication developed in our project. This
system has been developed using a PC & a mobile. The former acts as a command
initiator and the latter acts as a command receiver. Both are capable of
communicating serially. The PC is equipped with buffers to the relays through
parallel port. The operation to be performed is sent by mobile as SMS to PC. The PC
on receiving the SMS, controls the equipments connected to it appropriately.
Software has been developed in C to TX/RX serial data. Serial port software
routines are used to configure and communicate. ON/OFF controls of relays are done
by parallel port software routines. Specific software commands are used to control
each equipment