1. Judith Lievens

2. parts

3. Parts Shell

4. Parts Shell -Handle

5. Shell – Switch&Options Parts Stop – Reheat – Defrost – Bagel

6. Parts Shell - Slots

7. Parts Bottom and cord

8. Parts CrumbTray

9. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB The lever is connected to the handleon the outside of the shell

10. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB Whenpusheddownwards, the plastic tab closes the contacts of the electrical circuit because of itsshape.

11. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB The contacts are closedwhen the plastic tab is pushed down. They close the electrical circuit and launch the toasting process.

12. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB The metal tab, when down, is attracted to anelectromagnet and keepseverythingbelowduring the toastingprocess.

13. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB When the electrical circuit is activated, the electromagnet is charged and attracts the metal tab.

14. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB There are twosprings, onethat is undertensionwhen the lever is lowered and pulls everything back up. The otheroneworks as a bumper

15. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB Whenpushed down, thisselfpositioning system clamps the breadsoit’spositioned in the middle of the slot.

16. Parts Inside Lever Plastic tab Contacts Metal tab Electromagnet Springs Selfpositioning slot PCB The Printed Circuit Board thatbringseverything in motion.