Ten Organizational Design Models to align structure and operations to busines...
Wml15105 eng
1. Washing Machine WML 15105 D
WML 15085 D
WML 15065 D
Automatická pračka
2. 1 Warnings by classifying according to waste
directives.
General Safety
• Never place your machine on a Intended use
carpet covered floor. Otherwise, • This product has been designed for
lack of airflow from below of your home use.
machine may cause electrical parts to • The appliance may only be used for
overheat. This may cause problems washing and rinsing of textiles that
with your washing machine. are marked accordingly.
• If the power cable or mains plug is Safety instructions
damaged you must call Authorized • This appliance must be connected to
Service for repair. an earthed outlet protected by a fuse
• Fit the drain hose into the discharge of suitable capacity.
housing securely to prevent any • The supply and draining hoses must
water leakage and to allow machine always be securely fastened and
to take in and discharge water as remain in an undamaged state.
required. It is very important that the • Fit the draining hose to a washbasin
water intake and drain hoses are not or bathtub securely before starting up
folded, squeezed, or broken when your machine. There may be a risk of
the appliance is pushed into place being scalded due to high washing
after it is installed or cleaned. temperatures!
• Your washing machine is designed • Never open the loading door or
to continue operating in the event of remove the filter while there is still
a power interruption. Your machine water in the drum.
will not resume its program when • Unplug the machine when it is not in
the power restores. Press the use.
“Start/Pause/Cancel” button for 3 • Never wash down the appliance with
seconds to cancel the program (See, a water hose! There is the risk of
Canceling a Program) electric shock!
• There may be some water in your • Never touch the plug with wet hands.
machine when you receive it. This is Do not operate the machine if the
from the quality control process and power cord or plug is damaged.
is normal. It is not harmful to your • For malfunctions that cannot be
machine. solved by information in the operating
• Some problems you may encounter manual:
may be caused by the infrastructure. • Turn off the machine, unplug it,
Press "Start/Pause/Cancel" button turn off the water tap and contact
for 3 seconds to cancel the program an authorized service agent. You
set in your machine before calling the may refer to your local agent or
authorized service. solid waste collection center in your
First Use municipality to learn how to dispose
• Carry out your first washing process of your machine.
without loading your machine and If there are children in your
with detergent under “Cottons 90°C” house...
program. • Keep children away from the machine
• Ensure that the cold and hot water when it is operating. Do not let them
connections are made correctly when tamper with the machine.
installing your machine. • Close the loading door when you
• If the current fuse or circuit breaker is leave the area where the machine is
less than 16 Amperes, please have located.
a qualified electrician install a 16
Ampere fuse or circuit breaker.
• While using with or without a
transformer, do not neglect to have
the grounding installation laid by a
qualified electrician. Our company
shall not be liable for any damages
that may arise when the machine is
used on a line without grounding.
• Keep the packaging materials out
of reach of children or dispose them
2 - EN
3. 2 Installation
Removing packaging
reinforcement
Tilt the machine to remove the packaging
reinforcement. Remove the packaging
reinforcement by pulling the ribbon.
Opening the transportation locks there are rubber seals (4 seals for the
Transportation safety bolts must models with double water inlet and
be removed before operating the 2 seals for other models) attached
washing machine! Otherwise, the to the hoses. These seals should
machine will be damaged! be used at the tap and machine
1. Loosen all the bolts with a spanner connection ends of the hoses. The
until they rotate freely (“C”) plain end of the hose fitted with a
2. Remove transportation safety bolts filter must be attached to the tap and
by turning them gently. the elbowed end must be attached
3. Fit the covers (supplied in the bag to the machine. Tighten the nuts of
with the Operation Manual) into the the hose well by hand; never use
holes on the rear panel. (“P”) wrenches to tighten the nuts.
• Models with a single water inlet
should not be connected to the hot
water tap.
When returning the appliance to its place
after maintenance or cleaning, care should
be taken not to fold, squeeze or block the
Keep the transportation safety bolts hoses.
in a safe place to reuse when the
washing machine needs to be moved Connecting to the drain
again in the future. The water discharge hose can be attached
Never move the appliance without to the edge of a washbasin or bathtub. The
the transportation safety bolts drain hose should be firmly fitted into the
properly fixed in place! drain as to not get out of its housing.
Important:
Adjusting the feet • The end of the drain hose must be
Do not use any tools to loosen the directly connected to the wastewater
lock nuts. Otherwise, they can be drain or to the washbasin.
damaged. • The hose should be attached to a
1. Manually (by hand) loosen the lock height of at least 40 cm, and 100 cm
nuts on the feet. at most.
2. Adjust them until the machine stands • In case the hose is elevated after
level and firmly. laying it on the floor level or close
3. Important: Tighten all lock nuts up to the ground (less than 40 cm
again. above the ground), water discharge
Connecting to the water supply.
Important:
• The water supply pressure required
to run the machine must be 1-10 bar
(0,1 – 1 MPa).
• Connect the special hoses supplied becomes more difficult and the
with the machine to the water intake laundry may come out wet.
valves on the machine. • The hose should be pushed into the
• In order to prevent water leakage that drainage for more than 15 cm. If it is
may occur at the connection points, too long you may have it shortened.
3 - EN
4. • The maximum length of the Correct load capacity
combined hoses must not be longer Please follow the information in the
than 3.2 m. “Program Selection Table”. Washing
results will degrade when the
Electrical connection machine is overloaded.
Connect the machine to an earthed outlet Loading door
protected by a fuse of suitable capacity. The door locks during program operation
Important: and the Door Locked Symbol (Figure 3-13i)
• Connection should comply with lights up. The door can be opened when
national regulations. the symbol fades out.
• The voltage and the allowed fuse
protection are specified in the section Detergents and softeners
“Technical Specifications”. Detergent Drawer
• The specified voltage must be equal The detergent drawer is composed of three
to your mains voltage. compartments:
• Connection via extension cords or The detergent dispenser may be in two
multi-plugs should not be made. different types according to the model of
A damaged power cable must be your machine.
replaced by a qualified electrician.
The appliance must not be operated – (I) for prewash
unless it is repaired! There is the risk – (II) for main wash
of electric shock! - (III) siphon
– ( ) for softener
3 Initial preparations for
washing
Preparing clothes for washing
Laundry items with metal attachments such
as, bras, belt buckles and metal buttons
will damage the machine. Remove metal Detergent, softener and other cleaning
attachments or place the items in a clothing agents
bag, pillow case, or something similar. Add detergent and softener before starting
• Sort the laundry according to type the washing program.
of fabric, color, and degree of soiling Never open the detergent dispenser drawer
and permissible water temperature. while the washing program is running!
Always follow the advice on the When using a program without pre-wash,
garment labels. no detergent should be put into the pre-
• Place small items like infants’ socks wash compartment (Compartment no. I).
and nylon stockings, etc. in a laundry
bag, pillow case or something similar. Detergent quantity
This will also save your laundry from The amount of washing detergent to be
getting lost. used depends on the amount of laundry, the
• Wash “machine washable” or “hand degree of soiling and water hardness.
washable” labeled products only with
an appropriate program. • Do not use amounts exceeding
• Do not wash colors and whites the quantities recommended on
together. New, dark colored cottons the package to avoid problems of
may release a lot of dye. Wash them excessive foam, poor rinsing, financial
separately. savings and finally, environmental
• Use only dyes/color changers and protection.
lime removers suitable for machine • Never exceed the (> max <) level
wash. Always follow the instructions marking; otherwise, the softener will
on the packaging. be wasted without being used.
• Wash trousers and delicate clothes • Do not use liquid detergent if you
turned inside out. want to wash using the time delay
feature.
4 - EN
5. 4 Selecting a program and operating your machine
Control panel
5 3 4
90°
60° 60°
1000
40° 40° 500
30°
30° 3’’
Reset
30°
40°
7 6
1- Spin Speed Adjustment Knob * 6 - On/Off Button
2- Temperature Adjustment Button * 7 - Program Follow-up Indicators
3- Start/Pause/Cancel Button 8 - Child-proof Lock Indicator *
4- Auxiliary Function Keys
5- Program Selection Knob * According to your machine’s model
Normally soiled, fade proof
Turning the machine on 60˚C colored linens, cottons or
You can prepare the machine for program synthetic clothes and lightly
selection by pressing the “On/Off” button. soiled white linens
When the “On/Off” button is pressed, the
“Ready” light illuminates indicating that the 40˚C- Blended clothes including
door is ulocked. Press the “On/Off” button 30°C- synthetics and woolens as
again to shut down the machine. Cold well as delicate clothes.
Programs are limited with the highest
Program selection spin speed appropriate for that
Select the appropriate program from the particular type of cloth.
program table and the following washing
temperature table according to type, Main programs
amount and degree of soiling of the laundry. Depending on the type of textile, the
Select the desired program with the following main programs are available:
program selection button.
•Cottons
Each of these programs consist of a You can wash your durable clothes with
complete washing process, including this program. Your laundry will be washed
wash, rinse and, if required, spin with vigorous washing movements during a
cycles. longer washing cycle.
•Synthetics
Normally soiled, white You can wash your less durable clothes on
90˚C cottons and linens. this program. Gentler washing movements
and a shorter washing cycle is used
5 - EN
6. compared to the “Cottons” program. It is
recommended for your synthetic clothes Spin Speed selection
(such as shirts, blouses, synthetic/cotton You can have your clothes spun at the
blended garments, etc.). For curtains and maximum rpm selection on your machine
lace, the “Synthetic 40” program with pre- by using the selection knob in models
wash and anti-creasing functions selected is equipped with an rpm selection knob. In
recommended. order to protect your clothes, your machine
•Delicates will not spin above 800 rpm on synthetic
You can wash your delicate clothes programs and 600 rpm on woolens
on this program. It has more sensitive program. Furthermore, if you want to skip
washing movements and does not make the spin cycle and take your clothes out,
intermediate spinning compared to turn the rpm selection knob to “no spin”
“Synthetic” program. position.
•Woolens In machines not equipped with a spin speed
You can wash your machine-washable selection knob, the machine will spin in the
woolen garments on this program. Wash maximum possible rpm in the default setting
by selecting the proper temperature of the selected program.
according to the labels of your clothes.
It is recommended to use appropriate
detergents for woolens.
•Hand Wash
You can wash your woolen/delicate clothes
that bear “not machine- washable” labels
for which hand wash is recommended on
this program. It washes the laundry with
very tender washing movements without
damaging your clothes.
Additional programs
For special cases, there are also extra
programs available:
Additional programs may differ
according to the model of your
machine.
• Super
This program washes for a longer period
at 40°C and gives the same result as the
"Cottons 60°C" program, thus it saves
energy. It is suitable for clothes for which
you cannot use the "Cotton 60°C" program.
• Mini
This program is used to quickly wash (30
minutes) a small amount of lightly soiled
cotton garments.
Special programs
For specific applications, you can select any
of the following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
• Pump + Spin
This program spins with maximum possible
rpm in the default setting after the water
drains from the machine.
You should use a lower spin speed
for delicate laundries.
6 - EN
7. Program selection and consumption table
Programme Duration (~min)
Energy Consumption (kWh)
Water Consumption (l)
Spin speed reduction
Max. Load (kg)
Programme
Rinse Hold
Rinse Plus
Prewash
No Heat
No Spin
Cottons 90 5 133 45 1.65 • • • • • •
Cottons 60** 5 140 45 0.95 • • • • • •
Cottons 40 5 142 45 0.69 • • • • • •
Super 40 5 182 45 0.78 • • •
Synthetics 60 2.5 113 52 0.92 • • • • • •
Synthetics 40 2.5 104 52 0.56 • • • • • •
Synthetics 30 2.5 95 52 0.30 • • • • • •
Delicate 30 2 77 45 0.36 • • • • •
Woollens 40 1.5 70 45 0.36 • • • • •
Hand wash 30 1 45 32 0.21 • • •
Mini 30 2.5 30 43 0.17 • • •
• : Selectable
* : Automatically selected, not cancellable.
**: Energy Label programme (EN 60456)
Water and power consumption and programme duration may differ from the table
shown, subject to changes in water pressure, water hardness and temperature, ambient
temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in
the supply voltage.
The auxiliary functions in the table may differ according to the model of your
machine.
7 - EN
8. Auxiliary functions Reducing Speed
Auxiliary function selection keys You may use the speed reduction button
Select the required auxiliary functions before whenever you wish to spin your clothes
starting the program. below the maximum spin speed. When
Auxiliary function buttons may differ speed reduction button is pressed, spin
according to the model of your speed will be at the minimum rpm given on
machine. the panel.
No spin
Auxiliary function selection You may use this program if you do not
If an auxiliary function that should not be want to spin your clothes at the end of
selected together with a previously selected cottons, synthetics, woolen or delicate
function is chosen, the first selected programs.
function will be cancelled and the last Cold Washing
auxiliary function selection will remain active. If you wish to wash your clothes in cold
For example: If you want to select pre-wash water, you can use this program.
first and then quick wash, pre-wash will be
cancelled and quick wash will remain active. Starting the Program
Auxiliary function that is not compatible Press “Start/Pause/Cancel” button to start
with the program cannot be selected. (see the program. “Start/Pause/Cancel” button
“Program Selection Table”) will light up to indicate that the program has
started. The door is locked and the “Lid”
Pre-wash light fades.
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save Progressing a program
energy, water, detergent and time. Pre- Progress of a running program is shown
wash without detergent is recommended for through the program follow-up indicator. At
lace and curtains. the beginning of every program step, the
Rinse Plus relevant indicator lamp will light up and light
With this function, you can increase the of the completed step will turn off.
number of current rinsing steps. Thus, If the machine is not spinning, the
sensitive skins’ risk of being affected by the program may be in rinse hold mode
remainder detergent on the clothes will be or the automatic spin correction
decreased. system has been activated because
Rinse hold of excessive unbalanced distribution
If you do not want to unload your clothes of laundry in the machine.
immediately after the cotton, synthetics,
woolen and delicate fabrics program, you Changing the selections after the
may release your clothes inside the machine
in the last rinsing water by pressing the rinse program has started
hold button in order to prevent your clothes You can use this feature after your machine
become wrinkled. After this process you has started to wash different textile groups
may spin your laundry by pressing “Start/ in the same batch of clothes under higher
Pause/Cancel” button or you may end the or lower temperatures. You must cancel
program by pressing “Start/Pause/Cancel” the ongoing program in order to change the
button for 3 sec. washing program.
• In the machines equipped with spin For example, press and hold the “Start/
speed selection knob or button, you Pause/Cancel” button for 3 seconds to
can spin by selecting the desired “Cancel” the program in order to select
spin speed and press "Start/Pause/ “Cottons 40” program instead of “Cottons
Cancel" button. 60” program. Select the “Cottons 40”
• As for machines not equipped with a program by rotating the program knob.
spin speed selection knob, you can Press "Start/Pause/Cancel" button to start
end the program without a spin cycle the program.
by pressing the “Start/Pause/Cancel”
button and draining the water. If you Switching the machine to standby
wish your clothes be spun, you can mode
spin them by selecting “pump+spin” Press “Start/Pause/Cancel” button
program. momentarily to switch your machine to the
standby mode. Auxiliary functions can be
8 - EN
9. cancelled or selected in accordance with 5 Maintenance and cleaning
the step the program is at. The door can be
opened if the water level is suitable. Laundry Detergent Drawer
may be added / taken out by opening the Remove any powder residue buildup in the
door. drawer. To do this;
1. Press the dotted point on the siphon
in the softener compartment and pull
Child-proof lock towards you until the compartment is
You can protect the appliance from being removed from the machine.
tampered by children by means of the child-
proof lock. In this case, no change can be
made in the running program.
The machine is switched to child-lock by
pressing the 1st and 2nd auxiliary functions
from the left for 3 sec. 1st auxiliary function
light will flash continuously. To deactivate
the child-proof lock, press the same buttons
for 3 sec. If more than a normal amount of
water and softener mixture starts to
Ending the program through gather in the softener compartment,
the siphon must be cleaned.
canceling 2. Wash the dispenser drawer and the
In order to cancel the selected program, siphon with plenty of lukewarm water
press the "Start/Pause/Cancel" button for 3 in a washbasin.
seconds. The machine starts to discharge 3. Replace the drawer into its housing
the water. “Wash” and “Program Finished” after cleaning. Check if the siphon is
lights will light up. "Start/Pause/Cancel" and in its original location.
“Wash” lights will go off after discharging
process is over and the “Lid” light will start
flashing. “Lid” lamp will light up continuously Inlet water filters
when the door is unlocked. There is a filter at the end of each water
intake valve at the back side of the machine
If the program is cancelled in the middle and also at the end of each water intake
of the process, “Wash” and “Program hose where they are connected to the tap.
Finished” lights will light up. The machine These filters prevent the foreign substances
can drain all the water or can take in water and dirt in the water to enter into the
for 3 times at most to cool down the clothes machine. Filters should be cleaned as they
and complete draining process. When the get dirty.
water discharging process is completed,
the “Wash” light will go off, the “Program
Finished” light will light up and the “Lid”
light will continuously flash until the door is
unlocked.
End of program
The “Program Finished” lamp on the
program follow-up indicator will light up
when the program comes to an end. The lid
is unlocked 2 minutes later, the “Program • Close the taps.
Finished” and “Lid” lamps will light up • Remove the nuts of the water intake
continuously. The machine is now ready for hoses to clean the surfaces of the
a second cycle. filters on the water intake valves with
If any key is pressed when the machine is an appropriate brush.
at the end of the program or if the position • If the filters are very dirty, you can
of the selection knob is changed, the pull them out by means of pliers and
“Program Finished” light will go off and only clean them.
the “Lid” lamp will remain as lit. If the door • Take out the filters on the flat ends of
is still locked, the “Lid” light will continue the water intake hoses together with
flashing until the door is unlocked. the gaskets and clean thoroughly
Press the “On/Off” button to shut down the under streaming water.
machine. • Replace the gaskets and filters
9 - EN
10. carefully to their places and tighten
the hose nuts by hand.
Draining any remaining water and
cleaning the pump filter
Your product is equipped with a filter
system which ensures a cleaner water • Place a large container at the end of
discharge that extends pump life by the hose. Drain the water off into the
preventing solid items such as buttons, container by pulling out the plug at
coins and fabric fibers from clogging the the end of the hose. If the amount of
pump propeller during discharge of the water to be drained off is greater than
washing water. the volume of the container, replace
• If your machine fails to drain the the plug, pour the water out, then
water, the pump filter may be resume the draining process.
clogged. You may have to clean • After draining process is completed,
it every 2 years or whenever it is replace the plug into the end of the
plugged. Water must be drained off hose and fit the hose back into its
to clean the pump filter. place.
In addition, water may have to be drained
off completely in the following cases: If your product is not supplied with an
• before transporting the machine (e.g. emergency drain hose, do the following as
when moving house) shown in the figure below:
• when there is the danger of frost
In order to clean the dirty filter and
discharge the water;
1- Unplug the machine to cut off the supply
power.
There may be water at 90°C in the
machine. Therefore, the filter must • Place a large container in front of the
be cleaned only after the inside water filter to receive water flowing from the
is cooled down to avoid hazard of filter.
scalding. • Loosen pump filter (anticlockwise)
until water starts to flow out of it.
2- Open the filter cap. The filter cap may be Direct the flowing water into the
composed of one or two pieces according container you have placed in front of
to the model of your machine. the filter. You can use a piece of cloth
If it is composed of two pieces, press the to absorb any spilled water.
tab on the filter cap downwards and pull the • When there is no water left, turn the
piece out towards yourself. pump filter until it is completely loose
If it is composed of one piece, hold it from and remove it.
both sides and open it by pulling out. • Clean any residues inside the filter
as well as fibers, if any, around the
propeller region.
• If your product has a water jet
feature, be sure to fit the filter into its
housing in the pump. Never force the
filter while replacing it into its housing.
Fit the filter fully into its housing;
otherwise, water may leak from the
3- An emergency drain hose is supplied filter cap.
with some of our models. Others are not
supplied with this item. 4- Close the filter cap.
Close the two-piece filter cap of your
If your product is supplied with an product by pushing the tab on it.
emergency drain hose, do the following as Close the one-piece filter cap of your
shown in the figure below: product by fitting the tabs on the bottom
• Pull out the pump outlet hose from its into their positions and pushing the upper
housing. part of it.
10 - EN
11. 6 Solution suggestions for problems
Problem Cause Explanation / Suggestion
Machine may have
Program cannot switched to self Reset your machine by pressing “Start/
be started or protection mode due to Pause/Cancel” button for 3 seconds. (see,
selected. an infrastructure problem Canceling a Program)
(such as line voltage, water
pressure, etc.).
There is water Be sure the seals of the water inlet hoses
coming from There might be problems are securely fitted.
the bottom of with hoses or the pump Tightly attach the drain hose to the tap.
the machine. filter. Make sure that the pump filter is completely
closed.
Machine
stopped Machine can stop It will resume operating when the voltage is
shortly after temporarily due to low
the program voltage. back to the normal level.
started.
The automatic spin correction system might
have been activated due to the unbalanced
It continuously distribution of the laundry in the drum.
The laundry in the drum may be clustered
spins. There may be an imbalance (bundled laundry in a bag). Laundry should
Remaining time of laundry in the machine. be rearranged and re-spun.
does not count No spinning is performed when the laundry
down. is not evenly distributed in the drum to
prevent any damage to the machine and to
its environment.
In the case of a paused
countdown while taking in The machine will wait until there is a
water: sufficient amount of water to avoid poor
Timer will not countdown
until the machine is filled washing results due to lack of water. Then
with the correct amount of the timer will start to count down.
water.
In the case of a paused
countdown at the heating
step:
It continuously Time will not count
washes.
Remaining time down until the selected
does not count temperature for the
program is reached
down.
The automatic spin correction system might
have been activated due to the unbalanced
distribution of the laundry in the drum.
In the case of a paused
countdown at the spinning The laundry in the drum may be clustered
step: (bundled laundry in a bag). Laundry should
There may be an imbalance be rearranged and re-spun.
of laundry in the machine. No spinning is performed when the laundry
is not evenly distributed in the drum to
prevent any damage to the machine and to
its environment.
11 - EN
12. 7 Specifications
Models WML 15105 D WML 15085 D WML 15065 D
Maximum dry laundry capacity (kg) 5 5 5
Height (cm) 84 84 84
Width (cm) 60 60 60
Depth (cm) 45 45 45
Net Weight (kg) 60 60 60
Electricity (V/Hz.) 230 V / 50hz 230 V / 50hz 230 V / 50hz
Total Current (A) 10 10 10
Total Power (W) 2200 2200 2200
Spinning cycle (rpm max.) 1000 800 600
Specifications of this appliance may change without notice to improve the quality of the
product. Figures in this manual are schematic and may not match your product exactly.
Values stated on the machine labels or in the documentation accompanying it are obtained
in laboratory in accordance with the relevant standards. Depending on operational and
environmental conditions of the appliance, values may vary.
This appliance’s packaging material is recyclable. Help recycle it and protect the
environment by dropping it off in the municipal receptacles provided for this purpose.
Your appliance also contains a great amount of recyclable material. It is marked with
this label to indicate the used appliances that should not be mixed with other waste.
This way, the appliance recycling organised by your manufacturer will be done under
the best possible conditions, in compliance with European Directive 2002/96/EC on
Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for
the used appliance collection points closest to your home. We thank you doing your
part to protect the environment.
3’’
Reset 8
On/Off Start Reset Coton Synthetics Woollens Delicate Babycare Sport Shirt Hand
Pause 3 sn. wash
Intensive Rinse Express Quick Duvet Anti Rinse Time Temperature No Cold
hold wash creasing plus delay heat
Prewash Main Rinse Drain Spin No Door wash End Child Conditioner
wash spin ready lock
12 - EN