Dynamics of Destructive Polarisation in Mainstream and Social Media: The Case...
A Global Terrorist Problem and a Peaceful Canadian Solution
1. A GL BAL
TERRORIST PROBLEM
AND A
PEACEFUL
CANADIAN
SOLUTION
PART 1: THE PROBLEM
2. RCMP Integrated National Security Enforcement Team
A/Sgt. Anik Bernard.
"Anik Bernard" <Anik.Bernard@rcmp-grc.gc.ca>
Hello Anik,
I'd like to provide the RCMP Canadian National Security Enforcement Team and the
Canadian House of Comons with some information that will ensure that you don't end up
being duped and fooled due to ignorance regarding what is now occurring in our Canadian
skies. Information that you can actually use to finally “get your man” as you eventually always
do. It is important that you have access to the correct information to allow you to sift through
the deliberately placed disinformation which is now prevalent and is intended to distract
sincere people who suffer from cognitive dissidence or people with poor work ethics.
This information regards a form of weather modification technique called Cloud Seeding from
a text book called The Complete Weather Resource Volume 2 Weather Phenomena.
Cloud seeding is a form of Geo-Engineering which was banned by the UN in 2010 as being
too dangerous to human health and the heath of our planet.
http://www.slideshare.net/ThaneCHeins/un-ban-on-chem-trail-geo-engineering-2010
Geo-Engineering, Cloud Seeding activities and associated human deaths have been cleverly
concealed by the perpetrators by labeling the issue as a “conspiracy theory,” thus making
anyone who raises the issue open to ridicule and ostricization which is quite obviously the
desired intent. Ongoing Geo-Engineering activities have been slowly introduced into the
collective consciousness as “normal” jet engine contrails. Geo-Engineering however is real
with many patents online which describe exactly what we are witnessing in our skies today
which is anything but a theory, normal or sane.
At an international symposium held in Ghent, Belgium May 28-30, 2010,
scientists asserted that “manipulation of climate through modification of Cirrus clouds
is neither a hoax nor a conspiracy theory.”
It is “fully operational” with a solid sixty-year history.
Though “hostile” environmental modification was banned by UN Convention in 1978,
its “friendly” use today is being hailed as the new savior to climate change and to
water and food shortages.
Military forces stand poised to capitalize on controlling the world’s weather.
“In recent years there has been a decline in the support for weather modification
research, and a tendency to move directly into operational projects.”
~World Meteorological Organization, 2007
3. I believe that once you carefully and thorougly investigate the evidence at at hand you will
conclude that; not only is this terrorist activity real, but it is ongoing and has already been
applied in Canada more than once most recently in Calgary and Toronto (flooding) as a
means to control and manipulate the Canadian Federal and Provincial Governments.
Kind regards
Thane Heins
President & CEO
Potential Difference Inc.
WEATHER MODIFICATION The History of Cloud Seeding 1940 – Today
Guidelines for Cloud Seeding to Augment Precipitation
By Conrad G. Keyes, American Society of Civil Engineers: http://bit.ly/1eEZBvh
People throughout the ages have sought ways to bring rain to moisture-deprived areas. In the
1800s and early 1900s people tried, unsuccessfully, to produce rain by ringing church bells or
firing cannons into the air. In the mid-1940s, scientists began testing an experimental method
called cloud seeding. Cloud seeding involves injecting particles into a cloud, which act as
freezing nuclei. Cloud droplets adhere to the injected particles and fall to the ground as
precipitation.
A requirement of cloud seeding is that clouds are already present. And those clouds must be
tall enough so that their upper portions extend into regions where temperatures are below
freezing. In other words, they must be cold clouds.
The earliest cloud seeding experiments, performed in 1946 by atmospheric scientist Vincent
Schaefer, involved dropping crushed dry ice (carbon dioxide) pellets into the top of a cloud,
from an airplane. Since dry ice is extremely cold (-180 degrees F or -78 degrees C), it cools
the air around it, which produces more condensation. The dry ice pellets also act as a
freezing nuclei. In one experiment, Schaefer dropped three pounds of ground dry ice into an
altocumulus cloud. Five minutes later, snow began falling from that cloud. The following year
one of Schafer's colleagues, Bernard Vonnegut, discovered that silver iodide makes a better
cloud seeding agent than dry ice.
Cloud Seeding Concerns Regarding Prolonged Droughts or Uncontrolled Floods
The 1950s saw a boom of rainmaking operations in drought-stricken areas around the world.
These operations, however failed to produce a significant increase in precipitation.
Furthermore, they provoked the objections of many people who were concerned with the
broader implications of manipulating the atmosphere. Would it lead to uncontrollable floods or
prolonged droughts?
Despite these concerns, at the end of the 1950s a U.S. Federal research program was
launched on cloud seeding and other forms of weather modification (the use of artificial
means to alter atmospheric phenomena). government agencies and private companies
conducted many experiments, with inconclusive results.
4. Cloud Seeding, Flash Floods and Death
Cloud seeding was the center of controversy more than once in the 1970s. In 1972, a spate of
cloud seeding was followed by a flash flood in Rapid City, South Dakota in which over 200
people lost their lives. While the cloud seeding and the flash flood may or may not have been
linked, the tragedy was enough to deter people from further rainmaking experiments there.
Cloud seeding was also a questionable practice used by the U.S. Military during the Vietnam
War. After the flooding of the Ho Chi Minh Trail, which supposedly came about as a result of
cloud seeding, the practice was called into question in the U.S. Senate.
Cloud Seeding used to Increase Snowfall
Some of the most impressive results have been obtained by seeding cumulus clouds. As
droplets freeze to the injected particles, they release latent heat, which fuels the upward
expansion of the clouds. And when a cumulus cloud develops vertically, it lasts longer and is
more likely to produce precipitation. Another way in which cloud seeding seems to be
effective is by seeding winter clouds that are already producing precipitation. This practice
has been shown to increase the amount of snow falling from those clouds.
Cloud Seeding used to Create Drought
On the flip side, by over-seeding a cloud, it's possible to reduce precipitation. When too many
freezing nuclei are present, they remain too small to fall to the ground – even after all
available supercooled droplets have frozen onto the freezing nuclei. The moisture in the cloud
will the evaporate. For this reason, over-seeding is used at airports to dissipate thick fog.
The practice of cloud seeding continues to the present day...
“Jet Contrails that block out the Sun are just normal...”
One of the primary disinformation campaigns now under was by the contrail con-artists is to
try to convince ignorant people that contrails are normal jet engine exhaust heat which
condenses and forms water vapor... that can exist in the atmosphere for as long as 20 or
more minutes.
5. The primary hole in this conspirator's theory is that is is simply not true, nor is the idea that on
any given day, a person can witness a hundred or more jets flying back and forth overhead,
often in a crisscross pattern - from sun up to sun down and then absolutely nothing on the
very same day the next week. Commercial passenger jet schedules do not vary from week to
week to the extent that is now occurring.
HIGH BYPASS TURBOFAN JET ENGINES & CONTRAILS
https://www.youtube.com/watch?v=WgL6b7VTxT4
Cloud seeding activities must also occur on non commercial jet routes to be effective and they
must occur on non commercial jet flight paths which is a dead giveaway to anyone conducting
a honest investigation or who isn't in criminal collusion with the perpetrators. Traitor being the
operative word here.
The main problem the conspirator's have is a lack of jets from which to conduct their cloud
seeding activities on a daily basis and this is why we can witness continuous heavy cloud
seeding on one day of the week and then nothing the next week on the very same day.
Contrails Are Chemtrails
Dr Vermeeren, of the Delft University of Technology, presented a 300-page scientific report
entitled,
“CASE ORANGE: Contrail Science, Its Impact on Climate and Weather Manipulation
Programs Conducted by the United States and Its Allies.”
Case Orange rejects use of the term ‘chemtrails’ because it is associated with amateur
conspiracy theorists. The only credible document it could find that uses it is the Space
Preservation Act of 2001 introduced by U.S. Representative Dennis Kucinich (D-OH). H.R.
2977 sought to ban the use of exotic weapon systems that would damage climate, weather,
tectonic and biological systems. “Chemtrails” are specifically listed. Though later removed, no
version of the bill ever became law.
6. Instead, the writers prefer the term ‘persistent contrails’ to describe the phenomenon since
all contrails are chemtrails.
‘Persistent contrails’ distinguishes those that contain weather-altering additives from those
that represent normal aircraft exhaust that dissipates after a few seconds or minutes.
1975 patent, “Powder Contrail Generation,” for the invention of a:
“specific contrail generation apparatus for producing a powder contrail having
maximum radiation scattering ability for a given weight [of] material. The seeding
material … consists of 85% metallic particles and 15% colloidal Silica and Silica gel in
order to produce a stable contrail that has a residence period of 1 up to 2 weeks.”
GEO ENGINEERING / CLOUD SEEDING RELATED PATENTS
United States Patent and Trademark Office
1338343 – April 27, 1920 – Process And Apparatus For The Production of Intense Artificial
Clouds, Fogs, or Mists
1619183 – March 1, 1927 – Process of Producing Smoke Clouds From Moving Aircraft
1631753 – June 7, 1927 – Electric Heater – Referenced in 3990987
1665267 – April 10, 1928 – Process of Producing Artificial Fogs
1892132 – December 27, 1932 – Atomizing Attachment For Airplane Engine Exhausts
1928963 – October 3, 1933 – Electrical System And Method
1957075 – May 1, 1934 – Airplane Spray Equipment
2097581 – November 2, 1937 – Electric Stream Generator – Referenced in 3990987
2409201 – October 15, 1946 – Smoke Producing Mixture
2476171 – July 18, 1945 – Smoke Screen Generator
2480967 – September 6, 1949 – Aerial Discharge Device
2550324 – April 24, 1951 – Process For Controlling Weather
2582678 – June 15, 1952 – Material Disseminating Apparatus For Airplanes
7. 2591988 – April 8, 1952 – Production of TiO2 Pigments – Referenced in 3899144
2614083 – October 14, 1952 – Metal Chloride Screening Smoke Mixture
2633455 – March 31, 1953 – Smoke Generator
2688069 – August 31, 1954 – Steam Generator – Referenced in 3990987
2721495 – October 25, 1955 – Method And Apparatus For Detecting Minute Crystal Forming
Particles Suspended in a Gaseous Atmosphere
2730402 – January 10, 1956 – Controllable Dispersal Device
2801322 – July 30, 1957 – Decomposition Chamber for Monopropellant Fuel – Referenced in
3990987
2881335 – April 7, 1959 – Generation of Electrical Fields
2908442 – October 13, 1959 – Method For Dispersing Natural Atmospheric Fogs And Clouds
2986360 – May 30, 1962 – Aerial Insecticide Dusting Device
2963975 – December 13, 1960 – Cloud Seeding Carbon Dioxide Bullet
3126155 – March 24, 1964 – Silver Iodide Cloud Seeding Generator – Referenced in 3990987
3127107 – March 31, 1964 – Generation of Ice-Nucleating Crystals
3131131 – April 28, 1964 – Electrostatic Mixing in Microbial Conversions
3174150 – March 16, 1965 – Self-Focusing Antenna System
3234357 – February 8, 1966 – Electrically Heated Smoke Producing Device
3274035 – September 20, 1966 – Metallic Composition For Production of Hydroscopic Smoke
3300721 – January 24, 1967 – Means For Communication Through a Layer of Ionized Gases
3313487 – April 11, 1967 – Cloud Seeding Apparatus
3338476 – August 29, 1967 – Heating Device For Use With Aerosol Containers – Referenced in
3990987
3410489 – November 12, 1968 – Automatically Adjustable Airfoil Spray System With Pump
3429507 – February 25, 1969 – Rainmaker
3432208 – November 7, 1967 – Fluidized Particle Dispenser
3441214 – April 29, 1969 – Method And Apparatus For Seeding Clouds
3445844 – May 20, 1969 – Trapped Electromagnetic Radiation Communications System
3456880 – July 22, 1969 – Method Of Producing Precipitation From The Atmosphere
3518670 June 30, 1970 – Artificial Ion Cloud
3534906 – October 20, 1970 – Control of Atmospheric Particles
3545677 – December 8, 1970 – Method of Cloud Seeding
3564253 – February 16, 1971 – System And Method For Irradiation Of Planet Surface Areas
3587966 – June 28, 1971 – Freezing Nucleation
8. 3601312 – August 24, 1971 – Methods of Increasing The Likelihood oF Precipatation By The
Artificial Introduction Of Sea Water Vapor Into The Atmosphere Winward Of An Air Lift
Region
3608810 – September 28, 1971 – Methods of Treating Atmospheric Conditions
3608820– September 20, 1971 – Treatment of Atmospheric Conditions by Intermittent Dispensing
of Materials Therein
3613992 – October 19, 1971 – Weather Modification Method
3630950 – December 28, 1971 – Combustible Compositions For Generating Aerosols, Particularly
Suitable For Cloud Modification And Weather Control And Aerosolization Process
USRE29142 – This patent is a reissue of patent US3630950 – Combustible compositions for
generating aerosols, particularly suitable for cloud modification and weather control and
aerosolization process
3659785 – December 8, 1971 – Weather Modification Utilizing Microencapsulated Material
3666176 – March 3, 1972 – Solar Temperature Inversion Device
3677840 – July 18, 1972 – Pyrotechnics Comprising Oxide of Silver For Weather Modification
Use
3722183 – March 27, 1973 – Device For Clearing Impurities From The Atmosphere
3769107 – October 30, 1973 – Pyrotechnic Composition For Generating Lead Based Smoke
3784099 – January 8, 1974 – Air Pollution Control Method
3785557 – January 15, 1974 – Cloud Seeding System
3795626 – March 5, 1974 – Weather Modification Process
3808595 – April 30, 1974 – Chaff Dispensing System
3813875 – June 4, 1974 – Rocket Having Barium Release System to Create Ion Clouds In The
Upper Atmospphere
3835059 – September 10, 1974 – Methods of Generating Ice Nuclei Smoke Particles For Weather
Modification And Apparatus Therefore
3835293 – September 10, 1974 – Electrical Heating Aparatus For Generating Super Heated
Vapors
3877642 – April 15, 1975 – Freezing Nucleant
3882393 – May 6, 1975 – Communications System Utilizing Modulation of The Characteristic
Polarization of The Ionosphere
3896993 – July 29, 1975 – Process For Local Modification of Fog And Clouds For Triggering
Their Precipitation And For Hindering The Development of Hail Producing Clouds
3899129 – August 12, 1975 – Apparatus for generating ice nuclei smoke particles for weather
modification
3899144 – August 12, 1975 – Powder contrail generation
3940059 – February 24, 1976 – Method For Fog Dispersion
3940060 – February 24, 1976 – Vortex Ring Generator
9. 3990987 – November 9, 1976 – Smoke generator
3992628 – November 16, 1976 – Countermeasure system for laser radiation
3994437 – November 30, 1976 – Broadcast dissemination of trace quantities of biologically active
chemicals
4042196 – August 16, 1977 – Method and apparatus for triggering a substantial change in earth
characteristics and measuring earth changes
RE29,142 – February 22, 1977 – Reissue of: 03630950 – Combustible compositions for generating
aerosols, particularly suitable for cloud modification and weather control and aerosolization
process
4035726 – July 12, 1977 – Method of controlling and/or improving high-latitude and other
communications or radio wave surveillance systems by partial control of radio wave et al
4096005 – June 20, 1978 – Pyrotechnic Cloud Seeding Composition
4129252 – December 12, 1978 – Method and apparatus for production of seeding materials
4141274 – February 27, 1979 – Weather modification automatic cartridge dispenser
4167008 – September 4, 1979 – Fluid bed chaff dispenser
4347284 – August 31, 1982 – White cover sheet material capable of reflecting ultraviolet rays
4362271 – December 7, 1982 – Procedure for the artificial modification of atmospheric
precipitation as well as compounds with a dimethyl sulfoxide base for use in carrying out said
procedure
4402480 – September 6, 1983 – Atmosphere modification satellite
4412654 – November 1, 1983 – Laminar microjet atomizer and method of aerial spraying of
liquids
4415265 – November 15, 1983 – Method and apparatus for aerosol particle absorption
spectroscopy
4470544 – September 11, 1984 – Method of and Means for weather modification
4475927 – October 9, 1984 – Bipolar Fog Abatement System
4600147 – July 15, 1986 – Liquid propane generator for cloud seeding apparatus
4633714 – January 6, 1987 – Aerosol particle charge and size analyzer
4643355 – February 17, 1987 – Method and apparatus for modification of climatic conditions
4653690 – March 31, 1987 – Method of producing cumulus clouds
4684063 – August 4, 1987 – Particulates generation and removal
4686605 – August 11, 1987 – HAARP Patent / EASTLUND PATENT – Method and apparatus for
altering a region in the earth’s atmosphere, ionosphere, and/or magnetosphere
4704942 – November 10, 1987 – Charged Aerosol
4712155 – December 8, 1987 – Method and apparatus for creating an artificial electron cyclotron
heating region of plasma
4744919 – May 17, 1988 – Method of dispersing particulate aerosol tracer
10. 4766725 – August 30, 1988 – Method of suppressing formation of contrails and solution therefor
4829838 – May 16, 1989 – Method and apparatus for the measurement of the size of particles
entrained in a gas
4836086 – June 6, 1989 – Apparatus and method for the mixing and diffusion of warm and cold
air for dissolving fog
4873928 – October 17, 1989 – Nuclear-sized explosions without radiation
4948257 – August 14, 1990 – Laser optical measuring device and method for stabilizing fringe
pattern spacing
1338343– August 14, 1990 – Process and Apparatus for the production of intense artificial Fog
4999637 – March 12, 1991 – Creation of artificial ionization clouds above the earth
5003186 – March 26, 1991 – Stratospheric Welsbach seeding for reduction of global warming
5005355 – April 9, 1991 – Method of suppressing formation of contrails and solution therefor
5038664 – August 13, 1991 – Method for producing a shell of relativistic particles at an altitude
above the earths surface
5041760 – August 20, 1991 – Method and apparatus for generating and utilizing a compound
plasma configuration
5041834 – August 20, 1991 – Artificial ionospheric mirror composed of a plasma layer which can
be tilted
5056357 – October 15, 1991- Acoustic method for measuring properties of a mobile medium
5059909 – October 22, 1991 – Determination of particle size and electrical charge
5104069 – April 14, 1992 – Apparatus and method for ejecting matter from an aircraft
5110502 – May 5, 1992 – Method of suppressing formation of contrails and solution therefor
5156802 – October 20, 1992 – Inspection of fuel particles with acoustics
5174498 – December 29, 1992 – Cloud Seeding
5148173 – September 15, 1992 – Millimeter wave screening cloud and method
5242820 - September 7, 1993 – Army Mycoplasma Patent Patent
5245290 – September 14, 1993 – Device for determining the size and charge of colloidal particles
by measuring electroacoustic effect
5286979 – February 15, 1994 – Process for absorbing ultraviolet radiation using dispersed
melanin
5296910 – March 22, 1994 – Method and apparatus for particle analysis
5327222 – July 5, 1994 – Displacement information detecting apparatus
5357865 – October 25, 1994 – Method of cloud seeding
5360162 – November 1, 1994 – Method and composition for precipitation of atmospheric water
5383024 – January 17, 1995 – Optical wet steam monitor
5425413 – June 20, 1995 – Method to hinder the formation and to break-up overhead
atmospheric inversions, enhance ground level air circulation and improve urban air quality
11. 5434667 – July 18, 1995 – Characterization of particles by modulated dynamic light scattering
5441200 – August 15, 1995 – Tropical cyclone disruption
5486900 – January 23, 1996 – Measuring device for amount of charge of toner and image forming
apparatus having the measuring device
5556029 – September 17, 1996 – Method of hydrometeor dissipation (clouds)
5628455 – May 13, 1997 – Method and apparatus for modification of supercooled fog
5631414 – May 20, 1997 – Method and device for remote diagnostics of ocean-atmosphere system
state
5639441 – June 17, 1997 – Methods for fine particle formation
5762298 – June 9, 1998 – Use of artificial satellites in earth orbits adaptively to modify the effect
that solar radiation would otherwise have on earth’s weather
5800481 – September 1, 1998 – Thermal excitation of sensory resonances
5912396 – June 15, 1999 – System and method for remediation of selected atmospheric conditions
5922976 – July 13, 1999 – Method of measuring aerosol particles using automated mobility-
classified aerosol detector
5949001 – September 7, 1999 – Method for aerodynamic particle size analysis
5984239 – November 16, 1999 – Weather modification by artificial satellite
6025402 – February 15, 2000 – Chemical composition for effectuating a reduction of visibility
obscuration, and a detoxifixation of fumes and chemical fogs in spaces of fire origin
6030506 – February 29, 2000 – Preparation of independently generated highly reactive chemical
species
6034073 – March 7, 2000 – Solvent detergent emulsions having antiviral activity
6045089 – April 4, 2000 – Solar-powered airplane
6056203 – May 2, 2000 – Method and apparatus for modifying supercooled clouds
6110590 – August 29, 2000 – Synthetically spun silk nanofibers and a process for making the
same
6263744 – July 24, 2001 – Automated mobility-classified-aerosol detector
6281972 – August 28, 2001 – Method and apparatus for measuring particle-size distribution
6315213 – November 13, 2001 – Method of modifying weather
6382526 – May 7, 2002 – Process and apparatus for the production of nanofibers
6408704 – June 25, 2002 – Aerodynamic particle size analysis method and apparatus
6412416 – July 2, 2002 – Propellant-based aerosol generation devices and method
6520425 – February 18, 2003 – Process and apparatus for the production of nanofibers
6539812 – April 1, 2003 – System for measuring the flow-rate of a gas by means of ultrasound
6553849 – April 29, 2003 – Electrodynamic particle size analyzer
6569393 – May 27, 2003 – Method and device for cleaning the atmosphere
12. 0056705 A1 – March 17, 2005 – Weather Modification by Royal Rainmaking Technology
7,645,326 – January 12, 2010 – RFID environmental manipulation
8,079,545 – December 20, 2011 – Ground based Manipulation and Control of Aerial Vehicle
during nonflying operations
0117003 - Oct 05.2012 – Geoengineering Method Of Business Using Carbon Counterbalance
Credits – alternate link
13. PART 2: THE SOLUTION
“Canada is founded upon principles
that recognize the supremacy of God
and the Rule of Law”
~ Canadian Constitution Act, 1892
“When a leader pays attention to falsehood
all his ministers become wicked”
~ Proverbs
14. Dear Dr. Garneau,
Please let me take a moment of your time to inform you that a RCMP National Security file number 2014-794
has been established by National Security Enforcement Team Investigator Bruno Daelman regarding the
deliberate and illegal poisonous heavy metal jet aerosol spraying of all Canadians including you which has been
ongoing since before 1998 even though banned by the UN in 2010 as being too dangerous to human health.
2010 UN BAN: http://www.slideshare.net/ThaneCHeins/un-ban-on-chem-trail-geo-engineering-2010
The point of this letter is to also to inform you that our Ottawa based Clean-Tech company, Potential Difference
Inc. (PDi) has devoted the past 15 years to the development of peaceful energy solutions to the need for this
crime against humanity and environmental crime regardless of the motive.
Our Clean-Tech innovations which are now being commercialized in Asia represent, “a new form of energy”
according to Dr. Stanley Townsend of the University of Toronto (& Former Managing Editor of the Canadian
Journal of Physics) and do away with all future energy based resource wars and pending water wars.
If the motive of the current jet aerosol spraying is Global Warming mitigation PDi's solutions make the entire
Global Warming issue completely moot. If the motive is a culling of the population our innovation makes that
requirement moot also. If the motive is to assist Monsanto with the deployment of their heavy metal resistant
GMO seeds, then our innovation makes “food shortage” spin moot as well.
New Form of Energy Harnessment Discovered
The new form of energy discovered by Potential Difference Inc. actually pertains to a method of extracting the
energy contained in the magnetic field which surrounds any current bearing wire without producing any negative
effects on the energy magnitude contained within said wire.We are now able to use this new energy extraction
technique to create transformers (Bi-Toroid Transformer, BiTT) which operate well in excess of 100% efficiency
(between 450 – 2700% as tested by Dr. Fusina of DRDC and in excess of 100,000% in computer simulations at
Philips in Holland). When Dr. Fusina independently third party tested our Bi-Toroid Transformer in the Power
Lab at the University of Ottawa he found it to be operating at infinite efficiency but he was not able to accept
what he was seeing so I suggested he fudge the data to make it more acceptable, which he gladly did.
Dr. Fusina DRDC Bi-Toroid Third Party Tests at Ottawa U: https://app.box.com/s/5pplhmk5g64g8h71vcjb
15. The BiTT achieves this magnetic field energy energy extraction objective by diverting Back-EMF induced
magnetic fields away from the primary coil of the transformer and into a pair of adjacent secondary coils. The
result is a transformer that delivers Real Power to a load but consumes almost pure Reactive Power in the
primary while operating ideally at virtually infinite efficiency because Reactive Power has a net power
consumption of zero Watts.
The energy extraction technique can also be applied to electric generators namely PDi's Regenerative
Acceleration (ReGen-X) Generator that; accelerates itself when placed on-load, reversing Lenz's Law, violating
Newton's Third Law and also delivering electrical power at an infinite mechanical power conversion rate.
Because the ReGen-X Generator has the ability to reverse Lenz's Law (aka the load current induced counter
electromotive torque) and accelerate itself (produce its own accelerative torque) when delivering power to a load
the input power required by the prime mover actually can be reduced on-load rather than increased.
When a ReGen-X Generator prototype was third party tested by retired NRC scientist Doug Hartwich in the
Power Lab at the University of Ottawa, the input power to the prime mover could be reduced by 40% when the
ReGen-X Generator delivered power to a load. Conversely a similar conventional generator coil operating under
identical conditions required a 12% increase in input power when placed on-load. Even with a 40% reduction in
prime mover input the ReGen-X Generator still delivered over 200% more power to the load and operated at
infinite efficiency while doing so.
Please find below operational details regarding the Bi-Toroid Transformer and ReGen-X Generator.
Bi-Toroid Transformer (BiTT)
Potential Difference Inc. has developed a new transformer design; a Bi-Toroid Transformer (BiTT) that has been
third party tested and validated by Dr. Fusina of Defence Research and Development Canada at operating at
infinite efficiency in lab testing at Ottawa University in 2009.
Dr. Fusina's testing was validated by Dr. Habash, Ottawa University's Power Lab supervisor. The BiTT was
computer modeled by senior Philips Engineer Rob Woudenberg in Holland in 2010 and shown to operate at
excess of 60,000% efficiency. In reality the efficiency was infinite but the computer was unable to calculate that
high. Both tests are attached.
Bi-Toroid Computer Simulation at Philips Showing 60,000% Efficiency
http://www.slideshare.net/ThaneCHeins/femm-bi-tt-simulation-1
Computer efficiency calculation page 4.
16. The BiTT is unique in that the primary of the transformer consumes virtually pure Reactive Power and little or
no Real Power even though it delivers Real Power to the load. This is accomplished by providing the on-load
secondary coil BEMF induced magnetic fields with an alternate flux path route into an adjacent secondary coil
and harnessing that magnetic field energy to deliver real power to a load. The bottom line is the BiTT delivers
on-load power at virtual no-load input power levels. This will generally result in a power reduction of between
50 – 90% when compared to a conventional transformer. When the BiTT is developed as a pole transformer it
will allow consumers to reduce their electricity consumption by up to 90%.
VIDEO 1, BiTT Explination Video for Dr. Zahn MIT
https://www.youtube.com/watch?v=IdL5EFkfxBQ&index=5&list=PLkH1zLdXy1Sy3_St1tUwtY_6qiusDkyG9
VIDEO 2, BiTT Tested by Dr. Fusina at Ottawa University Lab
https://www.youtube.com/watch?=VwUAAKFd69s&index=6&list=PLkH1zLdXy1Sy3_St1tUwtY_6qiusDkyG9
VIDEO 3, BiTT vs Conventional Transformer
https://www.youtube.com/watch?v=4_zgR5fyF30&list=PLkH1zLdXy1Sy3_St1tUwtY_6qiusDkyG9&index=2
17. Conventional Transformer On-Load Bi-Toroid Transformer On-Load
The conventional transformer consumes Real Power when delivering Real Power to the
resistive load (as denoted by the meter reading 1.00 cos theta). With the identical resistive load the Bi-
Toroid Transformer delivers Real Power but consumes almost pure Reactive Power with a net power
consumption near zero and a Power Factor of 0.08 and a greatly reduced input power consumption.
18. Bi-Toroid Transformer (BiTT)
Magnetic Field Energy Diversion (Divide and Conquer)
The BiTT is able to harvest on-load BEMF induced magnetic field energy while producing a neutral
input power reaction, by diverting said magnetic fields away from the primary coil of the transformer
and into an adjacent secondary coil where they can do useful work delivering power to a load. The
primary operates in a no-load condition consuming almost pure Reactive Power while the secondary
coils deliver on-load Real Power to the loads.
Independent BiTT Finite Element
analysis by JLN Labs France
showing how the secondary coil's
BEMF magnetic fields are
redirected away from
the primary coil in the center and
into the adjacent secondary
coil thus allowing the BiTT to
deliver on-load real power to the
loads while the primary operates
at no-load input Reactive Power
levels (zero net power
consumption).
19. Regenerative Acceleration (ReGen-X) Generator
Magnetic Field Energy Delay (He who hesitates is lost)
The ReGen-X Generator is able to harness on-load BEMF induced magnetic fields which are produced
in accordance with Lenz's Law and Newton's Third Law (“for every action there is an equal and
opposite reaction”) by delaying the flow of load current in the generator coil by between 45 – 90
degrees.
The oscilloscope shot below shows the on-load current sine wave for a conventional generator coil and
a ReGen-X Generator coil which is delayed by 45 degrees. The vertical center mark on the oscilloscope
screen is the conventional coil's sine wave Crest which is where the generator's rotating magnetic field
pole is closest to the coil's core in its approach, after which it starts to move away.
Because the ReGen-X Generator coil's load current is delayed by 45 degrees, the coil's BEMF induced
magnetic field is also delayed.
The ReGen-X coil's current magnitude (and corresponding induced magnetic field) peak when the rotor
magnet pole is moving away from the coil's core (after the vertical center mark) rather than when
approaching it as per the conventional generator coil operation – which produces the equal and
opposite reaction or counter-electromotive-torque production – which in turn requires an increase in
prime mover input power when any generator is placed on-load.
The ReGen-X Generator on-load 45 degree current delay results in the ReGen-X Generator which
produces a complementary-electromotive-torque – which produces an equal and identical reaction –
which in turn requires a decrease in input power.
Conventional generator coil current sine wave and
ReGen-X generator coil 45 degree current delay
20. VIDEO 4: PDi ReGen-X Demonstration at École de Technologie Supérieure (ETS)
https://www.youtube.com/watch?v=FqWSV2Nd7tM&list=UU6ZPiUObgaWAyeV3SmUH3mg
VIDEO 5: ETS ReGen-X Prototype Showing Infinite Efficiency Operational
https://www.youtube.com/watch?v=wh8xbyxAhMA&list=UU6ZPiUObgaWAyeV3SmUH3mg
Conclusions
To sum up I hope that you can see that transformers and a generators (and an electric motor design) that can
operate at infinite efficiency make the need for oil wars completely obsolete for all humanity moving forward in
2014 and beyond. These innovations also make the need for jet aerosol spraying of Canadians completely
obsolete as well.
Kind regards
Thane
Thane C. Heins
President & CEO
Potential +/- Difference Inc. R & D
"We generate solutions"
Email: thaneh@potentialdifference.ca
Cell: 613.795.1602
21. Technology Endorsements & Industry Comments
"As I'm concerned this is a work of GENIUS (and a rather major one at that)."
- Les Virany BSEE MIT Former USPTO examiner and Registered Patent Agent
"As a mechanical engineer I'm here to explain how it works and why it works. And it does work;
over a dozen of us were witness to that last Monday (as well as a film crew--filming in 3D no
less!)."
-Mike Brace, Tech Editor EV World (2012)
"This is the Holy grail for generators."
-NRC Scientist Doug Hartwick at Ottawa University (2009)
"This is a freakin' game changer!"
-Mike Elwood, Chairman Electric Mobility Canada at Ottawa University (2009)
"Of course it accelerates when a load is applied...! This represents several new chapters in
physics, that is why we are consulting MIT."
-Dr. Habash, University of Ottawa (2007)
"It works and it is not something I would have expected, now I am just trying to figure it out?"
-Dr. Marcus Zahn at MIT (2007)
"A number of your experiments are not lying in the field of Maxwellian electrodynamics? That is
fascinating! I will inform you on any progress that i'll make along with reports."
-Dr. Evstigneev N.M., Leading Scientist, Department of Chaotic Dynamics, Institute for
System Analysis, Russian Academy of Science (2009)
"Your claims seem to violate the law of conservation of energy and Maxwell's equations of electro-
magnetics." I will send you a short proposal, including my plan of work, estimate of cost, etc.
Then we can sign a short agreement and proceed."
-Mehrdad (Mark) Ehsani, Ph.D., P.E., F.IEEE, F.SAE, Robert M. Kennedy Professor &
Director, Power Electronics and Motor Drives Laboratory & Advanced Vehicle Systems
Research Program, Department of Electrical & Computer Engineering, Texas A&M
University (2008)
"This is absolutely fascinating stuff you are doing!"
-Joseph Shin, Electricity and Magnetism Professor, Concordia University (2011)
"If possible would like to meet with you to discuss your approach to the Association and of course
to get a better feel about the physics behind your invention. I would still like to see what you are
doing and perhaps we can include some of your material on our website newsletter?"
-David Mann, Canadian Association for the Advancement of Science (2009)
"Thane, Your Press Release was most interesting to me as a physicist and an engineer. The level of
technical detail was adequate to tell me that you probably have made a very significant advance
in applied physics and in safely and successfully handling a new source of electric power.
Congratulations!"
-Dr. Stanley Townsend, University of Toronto & Former Managing Editor of the Canadian
Journal of Physics (2006)
"We are interested in using the ReGenX technology in our LinkVolt Project to reduce roadside
refueling."
-Neil Young, LincVolt Project (2011)
22. "The magnetics lab here at Goddard expressed some interest in having you come down to do a
colloquium."
-NASA (2008)
"We really are more interested in developing its use and application for military power
requirements."
-US Air Force (2009)
"I have asked Mr. Gilles Brassard, A/Director, Spacecraft Payload here at the Canadian Space
Agency to look at your technologies and to visit your laboratory."
-Canadian Space Agency (2009)
"I am writing to ask you to submit what you feel would be an appropriate document to describe
your regenerative acceleration technology for circulation to our Committee members."
-Al Cormier, Executive Director Electric Mobility Canada (2009)
"You seem to have made an interesting discovery. Our internal physics experts review this
information and have determined that it is very interesting work."
-Mike Simpson, Transportation Analyst Rocky Mountain Institute (2009)
"Would you be willing to contribute an article on this technology to the Journal for Engineering and
Public Policy?"
-Donald Wallace, Executive Director Ontario Centre for Engineering and Public Policy
(2009)
"Thanks for providing technical information. If the effect of your invention is really true, I am sure
there will be strong needs in the market."
-Nissan Japan (2012)
"I would like to know why you are not the toast of the town... this technology can be offered as a
range extension option to our clients."
-Thomas Fritz, Vice President Electric Vehicle Operations, CODA Automotive (2012)
"The technology looks really interesting and is revolutionary. I would like to learn more about the
technology. Is it possible to organize a demo or a lecture in the USA?"
-Chrysler Electrified Powertrains (2012)
"This sounds interesting. I'd like you to connect with our Fuel Economy Learning Program
manager, to schedule a time for you to come in and share the technology with us. We need to
know more about the Physics behind it."
-General Motors (2012)
"It would be fitting for the inventor of the automobile to be first with your revolutionary
technology and for me to play a role in that would be awesome!"
-Mercedes-Benz (2012)
"When we finally understand what Thane Heins has discovered, we likely will have to rewrite the
laws of electromagnetism."
-Mike Brace EV World Tech Editor (2010)
23. “The Parliament of Canada,
affirming that the Canadian Nation
is founded upon principles that
acknowledge the supremacy of God,
the dignity and worth of the human person
and the position of the family
in a society of free men and free institutions.”
“Affirming also that men and institutions remain free
only when freedom is founded upon
respect for moral and spiritual values
and the rule of law”
~ Canadian Bill of Rights