3. 1. Waterproofing Materials
1.1 Waterproofing of
Basements & Tanks
1.2 Waterproofing of
Terraces
1.3 Waterproofing of
Walls
1.4 Complementary Waterproofing
Products - Reinforcements
1.5 Waterproofing Materials
for Joints
1.6 Roofing Membranes
1.7 Drainage Membranes
3
4. 1. Waterproofing Materials
1.1 Waterproofing of Basements & Tanks
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
AQUAMAT Cement-based, brushable sealing slurry. It offers total Grey
0317/1 waterproofing against water pressure up to 7 atm according to 25 kg 54
DIN 1048. Ideal for waterproofing basements and reservoir 5 kg 4 160
tanks. Suitable for potable water tanks according to W-347,
White
ISO 8467. Ideal for the internal (negative side) waterproofing of
underground areas, since it can withstand negative water 25 kg 54
pressure. 5 kg 4 160
Color: Grey, white, light blue. Light Blue
Cement-based brushable 25 kg 54
sealing slurry Consumption: 2,0-4,0 kg/m2.
AQUAMAT-MONOFLEX Flexible, one-component, polymer-modified brushable sealing 18 kg 54
0317/1 slurry. It is used for waterproofing surfaces of concrete, plaster,
NEW brick, cement, mosaics etc. Suitable in cases where elasticity of
the waterproofing layer is required, such as roofs and bathrooms
that will be covered with tiles, inverted roofs, under ground tanks
etc.
Color: Grey.
Flexible, one-component, Consumption:
brushable sealing slurry 2,0-4,0 kg/m2
AQUAMAT-FLEX Flexible, two-component brushable sealing slurry (25 kg of Grey
0314/1 cement powder + 8 kg of resin emulsion). Suitable for 33 kg 54(A)
waterproofing substrates that show or are expected to show (A+B) 54(B)
haircracks due to contractions-expansions or vibrations.
Ideal for surfaces that will be covered with tiles, inverted roofs,
under ground water tanks etc. Color: Grey. 18 kg 18
Packages: 33 kg (25 kg A+8 kg B), (A+B) (A+B)
18 kg (13,6 kg A+4,4 kg B)
Flexible, 2-component,
brushable sealing slurry Consumption: 2,0-4,0 kg/m2.
AQUAMAT-ELASTIC Elastic, two-component brushable sealing slurry. Suitable for Grey
0338/1 waterproofing substrates that show or are expected to show 35 kg 54(A)(B)
haircracks due to contractions-expansions or vibrations. Ideal
White
for roofs, flower stands, swimming pools, tunnels, above ground
water tanks etc. Also, for waterproofing under tiles combined 35 kg 54(A)
with the elastic tile adhesive Isomat AK-ELASTIC. (A+B) 54(B)
Color: Grey, white. 18 kg 18
Packages: 35 kg (25 kg A+10 kg B), (A+B) (A+B)
Elastic, 2-component, 18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B). 7 kg 48
brushable sealing slurry Consumption: 2,0-4,0 kg/m2. (A+B) (A+B)
AQUAMAT-PENETRATE Cement-based brushable sealing slurry. It penetrates the mass 20 kg 54
0344/1 of the concrete and waterproofs it. It remains permanent active,
and therefore, it continuously protects construction from any
water attack presence. It is capable of sealing hair cracks, even
if they appear afterwards. It has resistance to both positive and
negative water pressure. Suitable for waterproofing basements,
foundations, manholes and tanks.
Color: Grey.
Brushable sealing slurry
Consumption: 1,5 kg/m2.
with crystallizing effect
4
5. Waterproofing of Basements & Tanks
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
AQUAFIX Rapid setting cement for instant plugging and sealing of water 15 kg 32
0315/1 leaks. 5 kg 4 75
Color: Grey.
1 kg 15 240
Consumption:
Approx. 1,6 kg/lit.
Rapid-setting cement for
instant sealing of water
leaks
DUROPRIMER-SG Two-component, solvent-free epoxy primer. It is used as a 10 kg 42
0402/2 waterproofing layer on floors that are subjected to coatings (A+B) (A+B)
that face problems with rising damp and will be covered with
epoxy flooring systems or cement screeds. Moreover, it can be
used as a primer under the DUROFLOOR epoxy system on
substrates that are still damp or oil contaminated (first, the
substrate should be cleaned from oils). Color: Light beige.
Two-component epoxy
primer for concrete Consumption:
floors 600-1000 g/m2.
AQUAMAT ADMIX Concrete waterproofing admixture in powder form that is added 20 kg 54
0317/1 during concrete preparation forming insoluble crystalline
NEW compounds. Improves resistance to water permeability and does
not affect vapor permeability of concrete. It remains
permanently active and receives equally well positive and
negative hydrostatic pressure. Suitable for waterproofing
foundations, basements, tanks, wastewater treatment,
swimming pools etc. Color: Grey.
Concrete waterproofing
admixture with
Consumption: 0,8-1,2 kg per 100 kg of cement.
crystallizing effect
PLASTIPROOF Plasticizer-waterproofing admixture (ASTM C-494, type A, *1000 kg
0120/1 ELOT EN 934-2:T2 & T9). Used for formulating concrete with 240 kg 2
low water permeability and improved physical properties.
20 kg 39
Color: Dark brown.
5 kg 4 72
Consumption:
0,2-0,5 kg per 100 kg of cement.
Plasticizer, type A -
Concrete waterproofing
admixture
* Packages marked with an asterisk are available 3 days after reception of order.
5
6. Waterproofing Materials
1.2 Waterproofing of Terraces
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOFLEX Brushable elastomeric liquid membrane possessing high *150 kg 3
0201/1 elasticity and durability. Used for jointless and seamless 25 kg 24
waterproofing of terraces.
15 kg 44
Color: White, redbrown.
5 kg 4 110
Consumption: 1 kg 12 360
1,0-1,5 kg/m2.
Brushable elastomeric
waterproofing membrane
ISOFLEX-T25 Brushable elastomeric liquid membrane possessing high *150 kg 3
0225/1 elasticity and durability even to extreme temperature conditions 25 kg 33
(from -250C to +1200C). Used for the continuous, free of seams 15 kg 42
or joints, elastic, vapor-permeable waterproofing of 5 kg 4 72
terraces.
Color: White, redbrown (The redbrown color is available in 1 kg 12 360
1 kg, 5 kg and 15 kg packages.)
Brushable elastomeric Consumption:
waterproofing membrane 1,0-1,5 kg/m2.
ISO-PRIMER Primer of ISOFLEX and ISOFLEX-T25. 20 kg 39
0206/1 Color: White. 5 kg 4 72
1 kg 12 324
Consumption:
0,2-0,3 kg/m2.
Primer of brushable
elastomeric waterproofing
membranes
ISOFLEX-PU One-component brushable, polyurethane, liquid membrane. 25 kg 33
0226/1 Used for the continuous, free of seams or joints, elastic, 6 kg 4 120
vapor-permeable waterproofing of terraces.
1 kg 16 320
Color: White. Other colors by order.
Consumption:
2
Approx. 1,5 kg/m .
Brushable polyurethane
waterproofing membrane
PRIMER-PU Primer of ISOFLEX-PU. 17 kg 33
0227/1 Color: Transparent. 5 kg 4 120
1 kg 12 360
Consumption:
0,2-0,3 kg/m2.
Primer of ISOFLEX-PU
6
7. Waterproofing of Terraces
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
SM-16 Solvent used to dilute polyurethane coatings. Especially suitable 5 lit 4 72
1407/1 for diluting the brushable polyurethane waterproofing
membrane ISOFLEX-PU, when applied by spraying. It can also
clean tools used for the application of ISOFLEX-PU and also
tools from epoxy coatings residues. Additionally it can be used
as a thinner for epoxy coatings. For polyurethane coatings SM-
16 is added in a proportion up to 10% by weight.
Special solvent for
polyurethane coatings
AQUAMAT-MONOFLEX Flexible, one-component, polymer-modified brushable sealing 18 kg 54
0317/1 slurry. It is used for waterproofing surfaces of concrete, plaster,
NEW brick, cement, mosaics etc. Suitable in cases where elasticity of
the waterproofing layer is required, such as roofs and bathrooms
that will be covered with tiles, inverted roofs, under ground tanks
etc.
Color: Grey.
Flexible, one-component, Consumption:
brushable sealing slurry 2,0-4,0 kg/m2.
AQUAMAT-FLEX Flexible, two-component brushable sealing slurry (25 kg of Grey
0314/1 cement powder + 8 kg of resin emulsion). Suitable for 33 kg 54(A)
waterproofing substrates that show or are expected to show (A+B) 54(B)
haircracks due to contractions-expansions or vibrations.
Ideal for surfaces that will be covered with tiles, inverted roofs,
under ground water tanks etc. Color: Grey. 18 kg 18
Packages: 33 kg (25 kg A+8 kg B), (A+B) (A+B)
18 kg (13,6 kg A+4,4 kg B)
Flexible, 2-component,
brushable sealing slurry Consumption: 2,0-4,0 kg/m2.
AQUAMAT-ELASTIC Elastic, two-component brushable sealing slurry. Suitable for Grey
0338/1 waterproofing substrates that show or are expected to show 35 kg 54(A)(B)
haircracks due to contractions-expansions or vibrations. Ideal White
for roofs, flower stands, swimming pools, tunnels, above ground
35 kg 54(A)
water tanks etc. Also, for waterproofing under tiles combined
(A+B) 54(B)
with the elastic tile adhesive Isomat AK-ELASTIC.
Color: Grey, white. 18 kg 18
Packages: 35 kg (25 kg A+10 kg B), (A+B) (A+B)
Elastic, 2-component, 18 kg (12,9 kg A+5,1 kg B) & 7 kg (5 kg A+2 kg B). 7 kg 48
brushable sealing slurry Consumption: 2,0-4,0 kg/m2. (A+B) (A+B)
ISOGUM P Plastomeric bituminous membrane (APP) reinforced with Roll
0801/4 polyester cloth (180 g/m2) with or without mineral chipping. 1m x 10m
Fixed by torch welding without using bituminous glue.
(10 m2)
PLAIN MEMBRANES
ISOGUM 4 P (4,0 kg/m2). 25
MEMBRANES WITH MINERAL CHIPPING
Plastomeric bituminous ISOGUM 4 P MIN (4,0 kg/m2). 25
membrane (APP) ISOGUM 4,5 P MIN (4,5 kg/m2). 23
reinforced with polyester
cloth of 180 g/m2 ISOGUM 4,5 P MIN WHITE (4,5 kg/m2). 23
7
8. Waterproofing Materials
Waterproofing of Terraces
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOGUM 3V Plastomeric bituminous membrane reinforced with fiberglass Roll 30
0810/4 tissue (50 g/m2). Fixed by torch welding without using 1m x 10m
bituminous glue.
(10m2)
Weight: 3,0 kg/m2.
Plastomeric bituminous
membrane reinforced with
fiberglass tissue (50g/m2)
ISODIEN 4 PF ALU Elastomeric bituminous membrane reinforced with polyester Roll 25
0811/4 cloth (150 g/m2) and covered with aluminium sheet. Fixed by 1m x 10m
torch welding without using bituminous glue.
(10m2)
Weight: 4,0 kg/ m2.
Elastomeric bituminous
membrane covered with
aluminium sheet
ISOPAST Bituminous emulsion with excellent adhesion and resistance to 19 kg 36
1014/6 acid and alkaline solutions. Used for waterproofing foundations, 5 kg 120
retaining walls, floors, inclined (pitched) roofs etc. Also used as
a primer for fixing bituminous membranes.
Color: Black.
Consumption:
Approx. 0,2-1,0 kg/m2/layer.
Bituminous emulsion
ISOLAC-BT Bituminous waterproofing varnish with solvents. Provides 17 kg 36
1015/6 (former ISOLAC) excellent adhesion to all kinds of substrates and water 5 kg 120
impermeability. Used as a primer for fixing bituminous
membranes, as a vapor-barrier in insulations, and for
protecting concrete or metal surfaces from moisture
(protection against oxidation). It is applied in 1-3 layers by
roller or brush.
Color: Black.
Consumption: On metal surfaces: 100-150 g/m2/layer.
Bituminous varnish
On concrete surfaces: 250-300 g/m2/layer.
ISOMAC Bituminous mastic with excellent adhesion and elasticity. It can 20 kg 36
1018/6 be cold-applied with a smooth trowel. Suitable for sealing joints 5 kg 120
on horizontal and vertical surfaces, for sealing-bridging hair
cracks and for flashing (sealing) difficult points during the fixing
of bituminous membranes (drainpipes, joints or junctions in
parapets etc). Also used for repairing in waterproofing layers
formed by bituminous membranes.
Color: Black.
Bituminous mastic
Consumption: 1,2-1,3 kg/lit.
8
9. Waterproofing of Terraces
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOPAST-RUBBER Elastomer bituminous emulsion consisting of high quality 19 kg 36
1014/6 asphalt, resins and special additives. It has high durability in
moisture and excellent elasticity. Provides excellent adhesion
on various substrates like concrete, metal, wood etc. It
is used for waterproofing foundations, retaining walls,
terraces, roofs, etc.
Color: Brown-black.
Elastomer bituminous Consumption:
emulsion 0,35-0,50 kg/m2/layer.
* Packages marked with an asterisk are available 3 days after reception of order.
1.3 Waterproofing of Walls
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
FLEXCOAT Elastic, waterproofing paint. Offers total water impermeability White
0202/6 for the protection of walls against rain. It has high elasticity and 44
10 lit
crack bridging ability on surfaces that show hairline cracks.
3 lit 4 110
Suitable for painting and waterproofing walls, protecting of
bituminous layers etc. For exterior and interior use.
Colors: White. NCS
266 selected colors NCS pallet (minimum order Pallet
quantity 10 lit). 10 lit 44
High quality, elastic, 3 lit 4 110
Coverage: 8-12 m2 per liter.
waterproofing paint
FLEX-PRIMER Highly penetrative, polymer aqueous emulsion. Used in 20 kg 39
0224/6 combination with the highly elastic waterproofing paint 10 kg 44
FLEXCOAT, it forms an ideal system for the waterproofing of
5 kg 4 72
walls. It is also the ideal primer for the acrylic pasty plaster
1 kg 12 324
MARMOCRYL. Color: White.
Coverage: 5-10 m2/kg.
The package of 10kg is available in round, plastic container that
High quality acrylic is useful for preparing colored primer. A colored primer is
water-based primer necessary when the substrates will be covered with acrylic
plasters of base D & TR.
NAN0-SEAL Highly penetrative, polymer emulsion. Applied on porous 220 kg 2
0228/1 substrates stabilizes and protects them from the humidity and 5 kg 4 72
the creation of salt stains. Nano-seal prevents the growth of 1 kg 12 324
mould and fungi on the surface of the substrate. It can be over-
coated with paint.
Color: Light blue (transparent after drying).
Waterproofing and Consumption:
stabilisation of surfaces 100-200 g/m2 depending on the absorptivity of the substrate.
9
10. Waterproofing Materials
Waterproofing of Walls
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
PS-20 Ready-to-use, silicone-based, transparent solution with 20 lit 24
(former PROTESIL) solvents for waterproofing. It ensures extremely high water- 3 lit 4 120
0207/1 repellence and long term protection. It can be applied on 1 lit 18 288
various surfaces (natural or synthetic stone, unpainted plaster,
exposed masonry, decorative bricks, roof tiles, tiles, exposed
concrete etc.) for their protection against rain effect.
Also suitable for waterproofing tile joints.
Color: Transparent
Silicone-based solution
for waterproofing Consumption: 0,2-0,4 lit/m2.
PS-21 Ready-to-use, silicone-based solution without solvents for 20 lit 39
(former PROTESIL-W) waterproofing. It ensures extremely high water-repellence and 5 lit 4 72
0207/1 long term protection. It is suitable for waterproofing of tile joints 1 lit 12 324
and the protection against rain effect of various surfaces like
natural or synthetic stone, plaster, exposed masonry,
decorative bricks, roof tiles, tiles, unpolished marble, exposed
concrete etc.). It can be used even on slightly wet substrates.
Color: White (transparent after drying)
Silicone-based solution
without solvents for
Consumption: 0,2-0,4 lit/m2.
waterproofing
NANOPRO-C Water-based emulsion with high penetrating ability, based on 220 lit 2
0228/1 nano-molecular structure. Protects porous surfaces from 20 lit 39
moisture and salt stains. Suitable for concrete, masonry, plaster, 5 lit 4 72
tile grouts, gypsum boards, chip boards, natural stones etc. For
1 lit 12 324
indoor and outdoor applications. Color: White (transparent after
drying).
Consumption:
Nano-impregnation for 100-200 ml/m2, depending on the substrate's absorptivity.
protecting porous surfaces
NANOPRO-M Water-based emulsion with highly penetrating ability based on 220 lit 2
0228/1 nano-molecular structure. Protects unporous surfaces, from 20 lit 39
moisture and salt stains. Suitable for polished marbles, granites, 5 lit 4 72
tiles, porcelain etc. For indoor and outdoor applications.
1 lit 12 324
Color: White (transparent after drying)
Consumption:
Nano-impregnation to 50-70 ml/m2, depending on the substrate's absorptivity.
protect surfaces against
oils
NANOPRO-L Water-based emulsion with high penetrating ability, based on 20 lit 39
0228/1 nano-molecular structure. Protects porous and slightly porous 5 lit 4 72
surfaces (marbles, granites etc) from oil stains, moisture and 1 lit 12 324
salt stains and prevents from fungi-mould growth. Suitable for
concrete, masonry, plaster, tile grouts, gypsum boards, chip
boards, natural stones etc. For indoor and outdoor applications.
Color: White (transparent after drying)
Nano-impregnation to
protect surfaces against Consumption:
oils 50-100 ml/m2, depending on the substrate's absorptivity.
10
11. Waterproofing of Walls
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOMAT SL 17 Solvent-free elastomeric liquid membrane possessing high 15 kg 44
0523/3 elasticity and durability. Used under tiles for jointless and 5 kg 110
seamless waterproofing of sanitary areas like bathrooms,
showers etc. It can be applied by roller or spatula on concrete,
plaster, gypsum-board, chipboard etc.
Color: Grey.
Consumption:
Elastomeric liquid
1,0-1,5 kg/m2, depending on the nature of the substrate.
membrane for
waterproofing under tiles
AQUAMAT-F Aqueous silicate solution used against rising damp on walls *170 kg 3
0215/1 made of concrete or masonry. It can be applied either by
25 kg 26
impregnation or by a borehole procedure.
6 kg 4 72
Color: Transparent.
Consumption:
By boreholes: Approx. 18 kg/m2 of wall's cross-section.
By impregnation: 200-300 g/m2 of wall’s surface.
Damp course against
capillary rising damp
* Packages marked with an asterisk are available 3 days after reception of order.
1.4 Complementary Waterproofing Products - Reinforcements
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX
FIBERGLASS MESH 100 cm wide mesh Roll
made of fibreglass, for total reinforcing of waterproofing layers 1 m x 50 m
FOR (e.g. ISOFLEX membrane) in tough cases of multiple cracking.
WATERPROOFING (50 m2)
Weight: approx. 65 g/m2.
LAYERS Mesh: 1,0 mm x 2,0 mm.
1205/1 Roll
10 cm wide tape 10 cm x 50 m 20
made of the same material as above, used for the local
reinforcing of ISOFLEX membrane along cracks or joints.
TREVIRA Thin polyester cloth Roll
1203/1 of 30 g/m2, used for reinforcing of waterproofing layers such
1 m x 100 m
as ISOFLEX, AQUAMAT-ELASTIC etc.
(100 m2)
10 cm wide tape
made of the same material as above, used for the local 1 m x 200 m
reinforcing of waterproofing layers along cracks, joints or (200 m2)
wall-floor junctions.
Polyester cloth for
Roll
reinforcing waterproofing
layers 10 cm x 50 m 20
11
12. Waterproofing Materials
Complementary Waterproofing Products - Reinforcements
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX
WATERPROOFING Special parts made of thermoplastic elastomer for
waterproofing of moistured places.
MATERIALS FOR
MOISTURED PLACES
0630/1
Roll
Joint sealing tape. 12 cm x 50 m 1
Roll
12 cm x 10 m 1
Inner corner. 14 cm x 14 cm 25
Outer corner. 21 cm x 21cm 25
Wall sealings. 12 cm x 12 cm 25
Bottom sealings. 42,5 cm x 42,5 cm 10
ISOMAT BUTYL TAPE Self-adhesive butyl tape coated with non-woven polypropylene. Roll
0719/1 Used in wet areas for waterproofing under tiles, especially in 8 cm x 10 m 60
places where there are cracks, joints etc. It can be covered
with tile adhesives or brushable waterproofing materials.
Thickness: 0,9 mm
Self adhesive butyl tape
12
13. Complementary Waterproofing Products - Reinforcements
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.
WATERPROOFING Suitable for waterproofing and uncoupling of sound and Roll
& UNCOUPLING problematics substrates. Especially used in damp areas and on 1 m x 15 m 28
terraces, balconies etc. It can be placed on walls or floors and
MEMBRANE on a variety of substrates such as concrete, cement mortars,
0719/1
old tile layers, mosaics, masonry etc.
1.5 Waterproofing Materials for Joints
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
TIXOPHALTE Ready-to-use, cold-applied elastoplastic adhesive bituminous Black
0624/6 mastic sealant. Possesses superior permanent flexibility and
310 ml 24 1.440
excellent adhesion to all kinds of materials under various
conditions, even underwater.
Color: Black.
Consumption:
Approx.1,4 kg/lit of joint volume.
Elastoplastic & adhesive
bituminous mastic sealant
ELASTOTAN Elastomeric sealing and adhesive mastic with exceptional Grey
0607/6 adhesion to all building materials e.g. glass, aluminium, wood,
600 ml 15
PVC etc. It features high mechanical strength and resistance to
280 ml 25 1.125
ageing and weather conditions. Suitable for sealing joints 3 to
50 mm wide.
Color: White, grey. White
Consumption: 600 ml 15
Joint 10 mm x 10 mm: 1 cartridge/2,8 m of joint length. 280 ml 25 1.125
Elastomeric adhesive Joint 5 mm x 5 mm: 1 cartridge/11,2 m of joint length.
mastic sealant
DOMOSIL High performance, general-purpose silicone sealant for sealing Transparent
0623/6 joints 3 to 40 mm wide, on surfaces of non-porous materials 280 ml 25 1.125
such as glass, aluminum, porcelain (e.g. tiles), ceramic etc.
It cannot be overpainted.
White
Color: Transparent, white.
280 ml 25 1.125
Consumption:
Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.
Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
General-purpose silicone
sealant
13
14. Waterproofing Materials
Waterproofing Materials for Joints
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
DOMOSIL-S High performance, mildew resistant silicone sealant for sealing Transparent
0622/6 joints 3 to 40 mm wide, on surfaces of non-porous materials 280 ml 25 1.125
such as glass, aluminum, porcelain (e.g. tiles), ceramic etc.
Also suitable for applications in high moisture sanitary areas
such as bathrooms and kitchens, as well as in hospital areas, White
laboratories etc. Prevents fungi development that creates stains 280 ml 25 1.125
and black spots. It is not recommended for aquariums since it
contains fungicide. It cannot be overpainted.
Color: Transparent, white.
Mildew-resistant silicone Consumption: Joint 10 mm x 10 mm: 1 cartridge/3 m of joint
sealant length. Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
DOMOSIL-MICRO High performance, anti-mould silicone sealant with built-in Transparent
0622/6 Microban® antibacterial protection technology. Remains color 280 ml 12 900
stable even after 10 years. Appropriate for sealing joints of 3-
40mm wide in non-porous materials such as glass, aluminium,
White
porcelain and non-porous ceramics. It is applied in high
humidity areas such as kitchens, bathrooms, etc. It is not 280 ml 12 900
recommended for use in aquariums and cannot be overpainted.
Color: Transparent, white.
Anti-mould silicone
Consumption: Joint 10mm x 10mm: 1 cartridge/3 m of joint
sealant with built in
length. Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
Microban® technology
DOMOSIL-POOL Silicone sealant resistant to permanent water immersion such Transparent
0622/6 as swimming pools, aquariums etc. Appropriate for sealing 280 ml 25 1.125
vertical or horizontal joints 3-40mm wide, for indoor and
outdoor applications. It has very good adhesion on surfaces
such as glass, porcelain, aluminium, ceramics etc. Suitable for
sealing joints on boats, glass- structures etc. It cannot be
overpainted. Color: transparent.
Silicone sealant for Consumption:
permanent water Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
mmersion Joint 5mm x 5mm: 1 cartridge/12 m of joint length.
FLEX PU-20 One-component, solvent-free polyurethane sealing mastic. Ideal Grey
0627/6 for sealing joints where high elasticity is required. Suitable for 600 ml 20 1.000
joints in concrete, brickwork, natural and synthetic stones, steel,
310 ml 12 1.560
aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor
and indoor applications.
Color: Grey, white. White
600 ml 20 1.000
Consumption:
Polyurethane construction Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length.
joint sealant Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
FLEX PU-40 One-component, solvent-free polyurethane sealing and adhesive Grey
0626/6 mastic. Exceptional adhesion to all building materials, e.g. 600 ml 20 1.000
concrete, brickwork, natural and synthetic stones, steel,
310 ml 12 1.560
aluminium, wood, ceramic tiles, rigid plastic etc. For outdoor
and indoor applications. White
Color: White, grey, brown. 600 ml 20 1.000
310 ml 12 1.560
Consumption: Brown
Joint 10 mm x 10 mm: 1 cartridge/3 m of joint length. 600 ml 20 1.000
Polyurethane adhesive
Joint 5 mm x 5 mm: 1 cartridge/12 m of joint length.
and sealant 310 ml 12 1.560
14
15. Roofing Membranes
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
FLEX PU-30 S One-component, polyurethane sealing mastic with solvents. Grey
0626/6 Ideal for sealing joints where high elasticity is required. Suitable 600 ml 15 750
NEW for joints 5-50mm wide in concrete, brickwork, natural and 310 ml 25 1500
synthetic stones, steel, aluminium, wood, ceramic tiles etc. For
outdoor and indoor applications.
Color: Grey, white. White
600 ml 15 750
Consumption: 310 ml 25 1500
Polyurethane sealant Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
Joint 5mm x 5mm: 1 cartridge /12 m of joint length.
FLEX PU-50 S One-component, polyurethane sealing and adhesive mastic with Grey
0626/6 solvents. Exceptional adhesion to all building materials, e.g. 600 ml 15 750
NEW concrete, brickwork, natural and synthetic stones, steel, 310 ml 25 1500
aluminium, wood, ceramic tiles etc. Suitable for joints 5-30mm
wide. For outdoor and indoor applications.
White
Color: Grey, white.
600 ml 15 750
Consumption: 310 ml 25 1500
Polyurethane adhesive Joint 10mm x 10mm: 1 cartridge/3 m of joint length.
and sealant Joint 5mm x 5mm: 1 cartridge /12 m of joint length.
FLEX PU-2K Two-component joint sealant based on polyurethane resins. 5 kg 4(A) 27(A)
0633/6 Ideal for sealing horizontal and vertical concrete joints in floors (A+B) 6(B) 18(B)
NEW and structures like reservoirs, canals etc.
Available in two types:
FLEX PU-2KV: For vertical surfaces.
FLEX PU-2KH: For horizontal surfaces
Color: Grey
2-component Consumption: 1,45 kg/lit of joint volume
polyurethane joint sealant
FLEX MS-45 Elastomeric sealing and adhesive mastic with excellent bonding Grey
0629/6 to any kind of building material such as glass, aluminium, wood, 280 ml 25 1.125
PVC etc. It features high mechanical strength and great
endurance to ageing. It is also suitable for slightly wet
substrates. It is used for strong, elastic adhesions. Redbrown
Color: Grey, redbrown. 280 ml 25 1.125
Consumption:
Elastomeric adhesive Indicative consumption: 1 cartridge /10 linear meters.
and sealant
WATERSTOP 1520 Tape made of special treated bentonite and caoutchouc. Roll
0625/6 Suitable for sealing and waterproofing work joints in concrete 30 m/box
30
elements (e.g. work joints between concrete slab and concrete
wall).
Dimensions: 15 mm x 20 mm.
Swelling bentonite tape
15
16. Waterproofing Materials
1.6 Roofing Membranes
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.
DELTA-FOL PVG Roofing membrane placed underneath the tile-bearing laths. Roll
0701/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 25
possesses great mechanical strength and it is easily applied 2
due to its light weight (approx. 14,5 kg/roll). (75 m )
It is ideal for application in ventilated roofs with sheathing.
Roofing membrane for
ventilated roofs
DELTA-FOL PVE Roofing membrane placed underneath the tile-bearing laths. Roll
0715/4 Provides complete waterproofing, allows breathing of the roof,
1,5 m x 50 m 32
possesses great mechanical strength and it is easily applied
due to its light weight (approx. 12,5 kg/roll). (75 m2)
It is ideal for application in ventilated roofs with sheathing.
Roofing membrane for
ventilated roofs
DELTA-VENT S Waterproofing polypropylene roof membrane which is placed Roll
0716/4 underneath the tile-bearing laths. Provides complete
1,5 m x 50 m 25
waterproofing, possesses exceptional vapour-permeability and 2
great mechanical strength and it is easily laid due to its light (75 m )
weight (approx. 10,5 kg/roll).
It is ideal for application in non-ventilated roofs with or without
sheathing.
Roofing membrane for
non-ventilated roofs
DELTA-VENT N Waterproofing polypropylene roof membrane which is placed Roll
0716/4 underneath the tile-bearing laths. Provides complete 1,5 m x 50 m 32
waterproofing, possesses exceptional vapour-permeability and 2
great mechanical strength and it can be easily laid due to its light (75 m )
weight (approx. 9 kg/roll).
It is ideal for application in non-ventilated roofs without
sheathing.
Roofing membrane for
non-ventilated roofs
DRAGOFOL Roofing membrane placed underneath the tile-bearing laths. Roll
0717/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 40
possesses great mechanical strength and it is easily applied 2
due to its light weight (approx. 10,5 kg/roll). (75 m )
It is ideal for application in ventilated roofs without sheathing.
White roofing membrane
for ventilated roofs
16
17. Roofing Membranes
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.
DELTA-FOL LP Roofing membrane placed underneath the tile-bearing laths. Roll
0710/4 Provides complete waterproofing, allows breathing of the roof, 1,5 m x 50 m 50
possesses great mechanical strength and it is easily applied 2
due to its light weight (approx. 7,5 kg/roll). (75 m )
It is ideal for application in ventilated roofs without sheathing.
Transparent roofing
membrane for ventilated
roofs
ROOF-TOP Bituminous roofing membrane placed underneath the tile- Roll
0704/4
bearing laths. Provides complete waterproofing and possesses
1 m x 30 m
great mechanical strength. Bears polyester reinforcement and
double cover of perforated polyethylene film. (30 m2)
ROOF-TOP 800 30
Roll weight: approx. 24 kg.
ROOF-TOP 600 36
Roll weight: approx. 18 kg.
Bituminous roofing
membrane
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX
ISOMAT BUTYL TAPE ALU Self-adhesive butyl tape coated with aluminum. Mainly used Roll
0719/4 for waterproofing and sealing on roofs and terraces, in places 10 cm x 10 m 60
such as chimney-roof assemblies, roof vents etc. Suitable for
repairs on roof tiles, sealing joints on the top of the roof etc.
Thickness: 0,6 mm
Self adhesive butyl tape
with aluminum coating
1.7 Drainage Membranes
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.
DELTA-NB Drainage membrane made of high density polyethylen Roll
0918/5 0,5 mm thick, with dimples 8,0 mm high. 2 m x 20 m 15
(40 m2)
17
18. Waterproofing Materials
Drainage Membranes
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.
DELTA-MS Drainage membrane made of high density polyethylen Roll
0919/5 0,6 mm thick, with dimples 8,0 mm high. 2 m x 20 m 11
(40 m2)
DELTA-NP-DRAIN Drainage membrane made of high density polyethylene Roll
0910/5 0,6 mm thick, with dimples 8,0 mm high and polypropylene 2 m x 20 m 5
geotextile bonded to one side.
(40 m2)
DELTA-FLORAXX Drainage membrane of high density polyethylene with octagonal Roll
0913/5 shape dimples of 20 mm height. Suitable for garden roofs.
2 m x 20 m 6
(40 m2)
Drainage membrane
DELTA-FLORAXX TOP Drainage membrane of high density polyethylene with octagonal Roll
0913/5 shape dimples of 20 mm height and attached polypropylene
2 m x 10 m 12
geotextile. Suitable for garden roofs.
(20 m2)
Drainage membrane
DELTA Special termination bars used to cover the top edge of DELTA 20 ps./box
drainage membranes in vertical applications.
TERMINATION BARS Bar length: 2 m.
0905/5
18
19. Drainage Membranes
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/E.-PAL.
DELTA SCREWS Used for the montage of DELTA drainage membranes as plugs 100 ps./box
0907/5 or, in inverse, as bradawls bonded with their self-adhesive
head to the substrate.
DELTA WASHERS They are applied to the dimples of DELTA drainage membranes 100 ps./bag
0908/5 in points where the membrane is screwed, allowing secure
installation without tearing.
19
22. 2. Concrete & Mortar Additives
2.1 Concrete Additives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
PLASTIPROOF Plasticizer-waterproofing admixture (ASTM C-494, type A, *1000 kg
0120/1 ELOT EN 934-2:T2 & T9). Used for formulating concrete with 240 kg 2
low water permeability and improved physical properties.
20 kg 39
Color: Dark brown.
5 kg 4 72
Consumption:
0,2-0,5 kg per 100 kg of cement.
Plasticizer, type A -
Concrete waterproofing
admixture
BEVETOL-RD Concrete setting retarder - concrete superplasticizer *1000 kg
0129/1 (ASTM C-494: Type A, D and G, ELOT EN 934-2:T11.1 &
250 kg 2
T11.2). When added to the ready-mixed concrete improves
20 kg 39
its workability and increases its setting time. Suitable for
formulating high strength concrete, exposed concrete, pumpable
concrete etc.
Color: Dark brown.
Concrete setting retarder Consumption:
and concrete 0,2-0,8 kg per 100 kg of cement.
superplasticizer, type G
BEVETOL-SPL Concrete superplasticizer (ASTM C-494, type A, D & G, ELOT *1000 kg
0111/1 EN 934-2:T11.1 and T11.2). When added to ready-mixed
250 kg 2
concrete, increases workability without decreasing strength.
20 kg 39
When added during concrete preparation, reduces the amount
of water required (reduction of w/c ratio) thus increasing 5 kg 4 72
strength. Color: Dark brown.
Concrete superplasticizer, Consumption:
type G As superplasticizer (Type G): 0,6-0,8 kg per 100 kg of cement.
At smaller dosages acts as plasticizer.
REOTOL-SPL Concrete superplasticizer (ASTM C-494, type A & F, ELOT EN *1000 kg
0121/1 934-2:T3.1 and T3.2). When added to ready-mixed concrete, 240 kg 2
increases workability without decreasing strength. When added
20 kg 39
during concrete preparation, reduces the amount of water
required (reduction of w/c ratio) thus increasing strength.
Color: Dark brown.
Concrete superplasticizer, Consumption:
type F As superplasticizer (Type F): 0,2-1,4 kg per 100 kg of cement.
At smaller dosages acts as plasticizer.
ADIUM 110 Liquid polycarboxylic-based admixture acting as concrete *1000 kg
0128/1 superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. *220 kg 2
When added during preparation of concrete, reduces water
20 kg 39
demand up to 20%. When added to the ready-mixed concrete
improves significantly its workability (fluid concrete), without
need of additional water.
Color: Light brown.
Broad-use new generation
concrete superplasticizer Consumption:
0,60-1,40 kg per 100 kg of cement.
22
23. Concrete Additives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ADIUM 130 Liquid polycarboxylic-based admixture acting as as concrete *1000 kg
0128/1 superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. *220 kg 2
When added during preparation of concrete, reduces water
20 kg 39
demand up to 20%. When added to the ready-mixed concrete
improves significantly its workability (self-compacting concrete)
without need of additional water. Ideal for long-distance
delivery of ready-mixed concrete when long slump retention
New generation and workability is required. Color: Dark brown.
superplasticizer for long- Consumption:
distance delivery of 0,35-0,70 kg per 100 kg of cement.
concrete
ADIUM 132 Liquid polycarboxylic-based admixture acting as as concrete *1000 kg
0128/1 superplasticizer according to ELOT EN 934-2:T11.1 and T11.2. *220 kg 2
NEW When added during preparation of concrete, reduces water 20 kg 39
demand up to 20%. When added to the ready-mixed concrete
improves significantly its workability (self-compacting concrete)
without need of additional water. Ideal for long-distance
delivery of ready-mixed concrete when long slump retention
New generation
and workability is required. Color: Brown.
superplastisizer for
Consumption:
concrete with extended
0,35-0,80 kg per 100 kg of cement.
slump retention.
ADIUM 145 Liquid polycarboxylic-based admixture acting as concrete *1000 kg
0128/1 superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. *220 kg 2
NEW When added during preparation of concrete, reduces water
20 kg 39
demand up to 30%. When added to the ready-mixed concrete
improves significantly its workability (self-compacting
concrete), without need of additional water. Ideal for precast
concrete elements.
New generation Color: Brown.
superplastisizer for
precast concrete Consumption: 0,30-0,70 kg per 100 kg of cement.
elements.
ADIUM 150 Liquid polycarboxylic-based admixture acting as concrete *1000 kg
0128/1 superplasticizer according to ELOT EN 934-2:T3.1 and T3.2. *220 kg 2
When added during preparation of concrete, reduces water
20 kg 39
demand up to 30%. When added to the ready-mixed concrete
improves significantly its workability (self-compacting concrete),
without need of additional water. Ideal for precast concrete
elements.
New generation Color: Dark brown.
superplasticizer for
precast concrete Consumption: 0,20-0,50 kg per 100 kg of cement.
elements
BEVETOL-VZ Concrete setting retarder (ASTM C-494, type B, ELOT EN *250 kg 2
0112/1 934-2:T8). Increases setting time of concrete (delays setting) 20 kg 39
and improves its workability and its physical properties.
Enables delivery of ready-mixed concrete to longer distances.
Color: Dark brown.
Consumption:
Concrete 0,2-0,4 kg per 100 kg of cement.
setting retarder
23
24. 2. Concrete & Mortar Additives
Concrete Additives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
RETADOL Concrete setting retarder with plasticizing properties (ASTM C- *1000 kg
0122/1 494 type D, ELOT EN 934-2:T10). Increases setting time of *250 kg 2
concrete (delays setting) and improves its workability and its
20 kg 39
physical properties. Enables delivery of ready-mixed concrete
to longer distances.
Color: Dark brown.
Consumption:
Concrete setting retarder -
0,2-0,3 kg per 100 kg of cement.
Plasticizer
ADINOL-RAPID Broad-use concrete setting accelerator-antifreezing agent 1400 kg
0124/1 (ELOT EN 934-2:T6). Reduces setting time of concrete 320 kg 2
(accelerates setting) in cases where fast work is required and
20 kg 39
allows safe concreting in low temperatures.
Color: Dark yellow. 5 kg 4 72
Consumption:
Broad-use concrete 1,0-2,0 kg per 100 kg of cement depending on the desired
setting accelerator - setting time.
Antifreezing agent
ADINOL-RAPID 2H Hardening accelerator for concrete (ELOT EN 934-2:T7). 1400 kg
0124/1 It accelerates the process of growth of initial strength of 290 kg 2
concrete without affecting negatively the final strength. It 20 kg 39
contributes to the fast abstraction of formwork facilitating thus
5 kg 4 72
the fast casting.
Color: Dark yellow.
Hardening accelerator Consumption:
for concrete 1,0-2,0 kg per 100 kg of cement, depending on the desired
result.
AQUAMAT ADMIX Concrete waterproofing admixture in powder form that is added 20 kg 54
0317/1 during concrete preparation forming insoluble crystalline
NEW compounds. Improves resistance to water permeability and does
not affect vapor permeability of concrete. It remains
permanently active and receives equally well positive and
negative hydrostatic pressure. Suitable for waterproofing
foundations, basements, tanks, wastewater treatment,
swimming pools etc. Color: Grey.
Concrete waterproofing
admixture with
Consumption: 0,8-1,2 kg per 100 kg of cement.
crystallizing effect
* Packages marked with an asterisk are available 3 days after reception of order.
24
25. 2.2 Mortar Additives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
DOMOLIT Mortar plasticizer and setting retarder. Replaces lime. 220 kg 2
0103/1 Color: Dark brown. 20 kg 39
5 kg 4 72
Consumption:
For masonry and paving mortars: 50 g per 25 kg of cement. 1 kg 12 324
For plastering mortars: 75 g per 25 kg of cement.
Mortar plasticizer - Lime
replacement
DOMOLIT-TR Colorless mortar plasticizer and setting retarder. Replaces lime. *220 kg 2
0103/1 20 kg 39
Consumption:
5 kg 4 72
For masonry and paving mortars: 50 g per 25 kg of cement.
Plastering mortars: 75 g per 25 kg of cement. 1 kg 12 324
Transparent mortar
plasticizer - Lime
replacement
ASOLIT-POWDER Mortar plasticizer in powder form. Replaces lime. 30 kg 45
0125/1 Color: Beige.
Consumption:
2,0-5,0 kg per mixer batch of half a bag (25 kg) of cement.
Mortar plasticizer in
powder form - Lime
replacement
ADINOL-DM Waterproofing admixture for mortars and non reinforced 220 kg 2
0110/1 concrete with plasticizing properties. It is used for water- 20 kg 39
impermeable cement mortars, non-reinforced concrete, 5 kg 4 72
plasters etc.
1 kg 12 324
Color: Dark yellow.
Consumption:
Waterproofing admixture Cement mortars: 1 kg per 100 kg of cement.
for mortars and non Plastering mortars: 1 kg per 100 kg of cement+lime.
reinforced concrete Concrete: 0,8 kg per 100 kg of cement.
ADIFLEX-B Polymer dispersion - Elastifying agent for waterproofing slurries 150 kg 3
0113/1 (when added to AQUAMAT or cement mortars) or cementitious 20 kg 39
tile adhesives (when added to Isomat AK 20, Isomat AK 10 10 kg 36
etc.). Replaces all or part of the mixing water. Necessary for
5 kg 4 72
applications on dimensionally unstable substrates, subject
to vibration or contraction-expansion. 1 kg 12 324
Color: White.
Consumption:
Elastifying agent
5-10 kg per 25 kg bag of AQUAMAT, Isomat AK 20, Isomat
AK 10 etc., depending on the desired elasticity.
25
* Packages marked with an asterisk are available 3 days after reception of order.
26. Concrete & Mortar Additives
Mortar Additives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ADIPLAST Polymer latex (SBR). Improves the properties of mortars in 150 kg 3
0114/1 several ways offering, e.g. increased bonding to substrate and 20 kg 39
flexibility, shrinkage reduction, higher resistance to chemical 5 kg 4 72
effects and abrasion, enhanced water impermeability etc.
1 kg 12 324
Ideal for creating the bonding layer between old and new
concrete or mortar.
Color: White.
Consumption:
Polymer latex for multiple Added to the mixing water in proportion of ADIPLAST : water
improvements of mortars = 1:1 to 1:5.
LATEX Polymer latex. When added into the building mortars and 150 kg 3
0127/1 coatings, it increases bonding to the substrate, provides water 20 kg 39
impermeability and elasticity. It is suitable for creating bonding 5 kg 4 72
layers, repairing mortars, floor screeds resistant to abrasion,
1 kg 12 324
waterproof cement mortars, mortars resistant to chemicals,
plasters with high strength and water impermeability etc.
Color: White.
Latex admixture - Consumption:
Bonding Agent Added to the mixing water in proportion of LATEX:
water = 1:1 to 1:5.
DS-99 Additive for tile adhesives and joint grouts. Improves properties 20 kg 39
0116/1 such as bonding to substrate, abrasion resistance, water- 5 kg 4 72
impermeability.
1 kg 12 324
Color: White.
Consumption:
Added to the mixing water in proportion of DS-99 : water =
1:1 to 1:2.
Additive for tile adhesives
& joint grouts
2.3 Auxiliary Concreting Agents
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
SPLIT-2000 Deshuttering coating for all types of wooden or steel-faced *140 lit
0211/1 formwork.
20 lit 39
Color: Dark yellow.
Consumption:
Approx. 60 ml/m2.
Formwork deshuttering
agent
26
27. Auxiliary Concreting Agents
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOCURE Paraffin-based, water emulsion for protecting fresh concrete 220 kg 2
0223/1 from quick evaporation of mixing water. It ensures the full 20 kg 39
hydration of cement, thus it reduces any drying shrinkage
cracks. It is usually applied on large surfaces of exposed
concrete such as industrial floorings, parking areas, concrete
slabs etc. In case of subsequent layers on the concrete surface,
ISOCURE must be removed by water blasting.
Concrete curing agent Color: Light yellow.
Consumption:
0,15-0,20 kg/m2, depending on application conditions.
ISOCURE-A Water-based, acrylic emulsion for protecting fresh concrete 220 kg 2
0223/1 from quick evaporation of mixing water. It ensures the full 20 kg 39
hydration of cement, thus it reduces any drying shrinkage
cracks. It is usually applied on large surfaces of exposed
concrete such as industrial floorings, parking areas, concrete
slabs etc. It is also suitable for vertical surfaces. There is no
need of removing ISOCURE- A in case of subsequent layers on
Acrylic based concrete the concrete surface. Color: White (transparent after drying).
curing agent Consumption: 0,15-0,20 kg/m2, depending on application
conditions.
POLYPROPYLENE Polypropylene fibers 12 mm long, for reinforcing of concrete Paper bag
and mortars.
FIBERS 900gr 14 784
1327/6
Consumption:
· 600-900 g/m of concrete.
3 Plastic bag
· 900-1200 g/m of mortar.
3
600gr 20 1.120
* Packages marked with an asterisk are available 3 days after reception of order.
27
30. 3. Tile Adhesives & Grouts
3.1 Tile Adhesives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOMAT AK 9 Cement-based tile adhesive. Suitable for fixing ceramic tiles on Grey
0553/3 walls or floors on surfaces made of concrete, brickwork, plaster 25 kg 54
etc. For indoor and outdoor applications.
It is classified as type C1 adhesive according to EN 12004.
White
Color: Grey, white.
25 kg 54
Consumption:
1,5-4,0 kg/m2.
Cement-based tile
adhesive C1
ISOMAT AK 10 Cement-based tile adhesive, with no vertical slip. Suitable for Grey
0501/3 fixing ceramic tiles on walls or floors on surfaces made of 25 kg 54
concrete, brickwork, plaster etc. For indoor and outdoor 5 kg 4 160
applications.
It is classified as type C1 T adhesive according to EN 12004.
Color: Grey, white. White
25 kg 54
Consumption: 5 kg 4 160
Cement-based tile 1,5-4,0 kg/m2.
adhesive, with no vertical
slip C1 T
ISOMAT AK 11 High performance, polymer-modified tile adhesive with Grey
0550/3 extended open time. Suitable for fixing ceramic and porcelain 25 kg 54
tiles on all common substrates, such as concrete, screeds,
brickwork, plaster etc. For indoor and outdoor applications, on
White
walls and floors.
It is classified as type C2 E adhesive according to EN 12004. 25 kg 54
Color: Grey, white.
High performance,
Consumption:
polymer-modified tile
1,5-4,0 kg/m2.
adhesive C2 E
ISOMAT AK 12 High performance, polymer-modified adhesive for ceramic and Grey
0552/3 porcelain tiles on critical substrates. It is characterized by 25 kg 54
extended open time and no vertical slip. Also suitable for fixing
tiles on common substrates such as concrete, screeds,
White
brickwork, plaster. For indoor and outdoor applications, on walls
and floors. It offers high initial and final adhesive strength and 25 kg 54
resistance to moisture. It is classified as type C2 TE adhesive
according to EN 12004.
High performance, Color: Grey, white.
polymer-modified tile
Consumption: 1,5-4,0 kg/m2.
adhesive C2 TE
ISOMAT AK 20 High performance, flexible, polymer-modified adhesive for Grey
0558/3 ceramic and porcelain tiles on critical substrates. It is 25 kg 54
characterized by extended open time, no vertical slip and
flex flexibility. Also suitable for fixing natural stone and decorative
5 kg 4 160
bricks, on concrete, screeds etc. Recommended for substrates
like old tile layers, floors with in-floor heating, swimming pools White
etc. For indoor and outdoor applications, on walls and floors. It is 25 kg 54
classified as type C2 TE S1 adhesive according to EN 12004 and 15 kg 90
High performance, EN 12002. Color: Grey, white. 5 kg 4 160
flexible, polymer-modified Consumption: 1,5-4,0 kg/m2.
tile adhesive C2 TE S1
30
31. Tile Adhesives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOMAT AK 22 High performance, flexible, polymer-modified adhesive for all Grey
0549/3 type of tiles on deformable substrates. It is characterized by 25 kg 54
extended open time, no vertical slip and high flexibility. Also
5 kg 4 160
suitable for fixing tiles on concrete, screeds, gypsum board, old
e xtra tile layers, floors with in-floor heating, swimming pools, metallic
flex surfaces etc. It is ideal for applications on deformable and White
flexible substrates. For indoor and outdoor applications, on walls 25 kg 54
and floors. It is classified as type C2 TE S1 adhesive according 15 kg 90
High performance, to EN 12004 and EN 12002. Color: Grey, white. 5 kg 4 160
flexible, polymer-modified Consumption: 1,5-4,0 kg/m2.
tile adhesive C2 TE S1
ISOMAT AK 25 High performance, elastic, polymer-modified adhesive for all type 25 kg 54
0582/3 of tiles on deformable and vibrative substrates. It is 5 kg 4 160
characterized by extended open time, no vertical slip and
elasticity. Also suitable for fixing tiles on concrete, screeds,
extra plaster, old tile layers, floors with in-floor heating, swimming
flex pools, metallic surfaces, etc. For indoor and outdoor applications,
on walls and floors. It is classified as type C2 TE S2 adhesive
according to EN 12004 and EN 12002.
High performance,
Color: White.
elastic, polymer-modified
Consumption: 1,5-4,0 kg/m2
tile adhesive C2 TE S2
ISOMAT AK-ECOLIGHT Light-weight, elastic adhesive, for ceramic and porcelain tiles, on 15 kg 54
0572/3 deformable substrates. It is characterized by extended open
time, no vertical slip and high elasticity. Also suitable for fixing
natural stone and decorative bricks, on concrete, screeds,
extra plaster etc. Ideal wherever elasticity and adhesion strength are
flex required like old tile layers, gypsum boards etc. For indoor and
outdoor applications, on walls and floors. It is classified as type
C2 TE S2 adhesive according to EN 12004 and EN 12002.
Light-weight, elastic tile Color: Grey.
adhesive C2 TE S2 Consumption: 1,0- 3,0 kg/m2.
ISOMAT AK-LIGHT Light-weight, flexible adhesive, for all type of tiles on 18 kg 54
0572/3 deformable substrates. It is characterized by extended open
time, no vertical slip and high flexibility. Also suitable for fixing
all type of tiles on concrete, screeds, plaster, old tile layers,
extra floors with in-floor heating, swimming pools, metallic surfaces
flex etc. For indoor and outdoor applications, on walls and floors. It is
classified as type C2 TE S1 adhesive according to EN 12004
and EN 12002.
Light-weight, flexible tile Color: White
adhesive C2 TE S1 Consumption: 1,0-3,0 kg/m2
ISOMAT AK-MEGARAPID Two-component, fast-setting, flexible tile adhesive. It is 33 kg 54(A)
0557/3 characterized by extended open time and flexibility. Suitable for (A+B) 54(B)
fixing ceramic and porcelain tiles, on concrete, screeds, plaster,
mosaic, gypsum boards, terraces, floors with in-floor heating,
swimming pools etc. Ideal for areas that must be ready for use
within short time. For indoor and outdoor applications, on walls
and floors. It is classified as type C2 FE S2 adhesive according to
EN 12004 and EN 12002. Package: 33 kg (25 kg A+8 kg B).
Two-component, fast- Color: White.
setting, flexible tile Consumption: 1,5-4,0 kg/m2
adhesive C2 FE S2
31
32. Tile Adhesives & Grouts
Tile Adhesives
PRODUCT/CODE DESCRIPTION - APPLICATION PACKAG. PS/BOX PS/E.-PAL.
ISOMAT AK-ELASTIC High performance, two-component elastic tile adhesive. It is 35 kg 54(A)
0562/3 characterized by extended open time and exceptional elasticity. (A+B) 54(B)
Suitable for fixing ceramic and mosaic tiles wherever elasticity
and adhesion strength are required like old tile layers, terraces,
swimming pools, floors with in-floor heating etc. For indoor and 7 kg 48
outdoor applications, on walls and floors. It is classified as type (A+B) (A+B)
C2 E S2 adhesive according to EN 12004 and EN 12002.
Packages: 35 kg (25 kg A+10 kg B) & 7 kg (5 kg A+2 kg B).
High performance, Color: White.
two-component elastic Consumption: 1,5-4,0 kg/m2.
tile adhesive C2 E S2
ISOMAT AK-RAPID Fast-setting, polymer modified cement-based tile adhesive. Grey
0557/3 Suitable for fixing absorptive or non-absorptive tiles on walls or 25 kg 54
floors on surfaces made of concrete, brickwork, plaster etc.
Ideal in cases where the surfaces have to be delivered fast for
White
use, e.g. work areas etc. It is qualified as non-slip (zero
slipping of the tile). For indoor and outdoor applications. It is 25 kg 54
classified as type C2 FT adhesive according to EN 12004. 5 kg 4 160
Color: Grey, white.
Fast-setting polymer
modified tile adhesive Consumption: 1,5-4,0 kg/m2.
C2 FT
ISOMAT AK-STONE Cement-based tile adhesive for thick layers (up to 15 mm). Grey
0556/3 Suitable for fixing tiles or natural stone on walls or floors on 25 kg 54
surfaces made of concrete, brickwork, plaster etc. Possesses
increased open time for application. For indoor and outdoor
applications. It is classified as type C1 E adhesive according to White
EN 12004. 25 kg 54
Color: Grey, white.
Coarse-grained tile and Consumption:
natural stone adhesive 2,0-8,0 kg/m2.
C1 E
ISOMAT AK-GRAND Coarse-grained, polymer modified, cement-based tile adhesive Grey
0543/3 for thick layers (up to 15 mm). Suitable for fixing and pointing 25 kg 54
decorative overlays (artificial stone, slate, decorative bricks
etc.) on walls or floors on various surfaces and especially
White
where high adhesion and moisture resistance are required.
Possesses increased open time for application. For indoor and 25 kg 54
outdoor applications. It is classified as type C2 E adhesive
according to EN 12004. Color: Grey, white, beige. Beige
Polymer modified tile
25 kg 54
adhesive for decorative Consumption: Fixing: 2,0-8,0 kg/m2. Pointing: 1,0-4,0 kg/m2.
overlays C2 E
ISOMAT AK-MARBLE Fast-setting, polymer modified, cement-based marble and 25 kg 54
0555/3 granite adhesive. Suitable for fixing marble or granite on walls
or floors on various surfaces and especially where high
adhesion and moisture resistance are required. Prevents
staining of sensitive overlays, such as marble layers, due to
fast retention of water. Possesses increased open time for
application. For indoor and outdoor applications. It is classified
as type C2 E adhesive according to EN 12004.
Polymer modified marble Color: White.
and granite adhesive C2 E Consumption: 1,5-6,0 kg/m2.
32