1. 1
OUR RANGE OF CHAINS AND FITTINGS:
1) MARINE AND OFFSHORE RENEWABLE ENERGY:
MOORING CHAINS (STUD LINK AND STUDLESS) FROM 14 MM AND UP TO:
120 mm Dia. (4’’ 3/4) in Marine grades 2 & 3
200 mm Dia. (7’’ 7/8) in Offshore grades: NVR3, NVR3S
180 mm Dia. (7” 1/16) in Offshore grades: NVR4 & NVR5
FOR OFFSHORE FLOATING WIND TURBINES IN DEEP-WATER ENVIRONMENTS:
- WITH FLOATING TRIPODS
- WITH “BUOYANCY STABILIZED” BARGE WITH CATENARY MOORING LINES
- WITH BALLAST STABILIZED “SPAR BUOY” WITH CATENARY MOORING & DRAG-
EMBEDDED ANCHORS

2. 2
FOR FLOATING WIND ENERGY TESTING DEVICES (WIND RESOURCE ASSESSMENT
BUOYS AND OCEAN DATA ACQUISITION FLOATING SYSTEMS)
FOR WAVE ENERGY FLOATING GENERATORS OR CONVERTERS:

3. 3
FOR TIDAL ENERGY FLOATING TURBINES OR GENERATORS:
2) OIL AND GAS INDUSTRY:
OFFSHORE MOORING CHAINS (STUD LINK AND STUDLESS):
● up to 200 mm (7’’ 7/8) in grade NVR3 & NVR3S
● up to 180 mm (7’’ 1/16) in grade NVR4 & grade NVR5

4. 4
FITTINGS MOUNTED ON OFFSHORE MOORING CHAINS: LTM SHACKLES, H
SHACKLES, SLIM KENTER SHACKLES, CLOSED SWIVELS, LLC LINKS …
CHAFE CHAINS ASSEMBLIES, IN GRADE 3, ORQ, AND 4 AS PER 1993 AND
2007 OCIMF RECOMMENDATIONS
CORRESPONDING FITTINGS IN FORGED OR CAST STEEL SUCH AS:
TRIANGULAR PLATES, OBLONG PLATES, PEAR LINKS… .

5. 5
CHAINS FOR INSTALLATION/ HANDLING OF HOSES:
SNUBBING CHAINS, PICK UP CHAINS, HANG-OFF CHAINS, LIFTING CHAINS, FOR
HOSES PIPES IN GRADE 3 OR (GRADE 80)
USED OR SECOND HAND CHAINS (GOOD CONDITION) FOR OFFSHORE
APPLICATIONS IN GRADE 3, R3, R4 UP TO 120 MM DIAMETRE AVAILABLE IN
STOCK

6. 6
3) OTHER FIELDS OF ACTIVITIES:
STUD LINK ANCHOR CHAINS IN GRADE 2 AND 3, WITH CORRESPONDING
ANCHORS AND FITTINGS
OPEN LINK CHAINS FOR ANCHORING AND MOORING MADE OF SHORT LINKS
OR LONG LINKS IN GRADE SL2 (GRADE 40) OR GRADE SL3 (GRADE 60), WITH
CORRESPONDING ANCHORS AND FITTINGS.
For:
SHIPBUILDING AND SHIPREPAIRING YARDS /SHIPOWNERS
MINISTRIES OF DEFENCE IN FRANCE AND ABROAD
MILITARY SHIPBUILDING YARDS AND NAVIES
LIGHTHOUSES AND MARITIME ADMINISTRATIONS

7. 7
FENDER CHAINS FROM 18 MM TO 50 MM MADE WITH SHORT OR LONG LINKS
IN MILD STEEL (GRADE 40), OR IN HIGH RESISTANCE STEEL (GRADE 60), EITHER
HOT DIP GALVANISED, ZINKED OR IN STAINLESS STEEL.
For:
PORTS AUTHORITIES
FABRICATORS/ SUPPLIERS OF RUBBER FENDERS