1. 5898
WIRELESS K-BAND DUAL TEC® MOTION SENSOR
Honeywell’s 5898 Wireless K-Band DUAL TEC Motion PIR sensitivity and temperature sensing can be enabled via
Sensor provides superior detection and reduces the risk of local programming or from the central station. Installation is
false alarms. The combination of PIR and K-Band easy, with no jumpers, switches or disassembly, fewer
microwave technologies enable the sensors to distinguish mounting restrictions and an automatic walk test mode that
between real intruders and other environmental conditions turns on the LED for ten minutes—saving installers one trip
by “confirming” each other within a defined area of up the ladder for each sensor. The 5898 blends perfectly
protection. The sleek, compact design makes it ideal for with Honeywell’s 5800 Series family of sensors to create a
applications where aesthetics and discretion are critical. seamless look in any residential or commercial environment.
FEATURES
• Advanced DualCore Signal – Ceiling and wall mounting brackets match sensing technologies, the look of
Processing help to easily direct the pattern the installation is consistent.
DualCore signal processing analyzes where needed
• Decreased Liability
PIR and microwave signals through the – No mounting height adjustments
Self-test—alerts end-user and central
5898 microcontroller. DualCore – 7'-9' mounting height means fewer
station if the motion detector stops
processing supports a multitude of restrictions than current offerings
functioning
advanced functions, including – Easy opening case
concurrent diagnostics, digital – Covered circuit board reduces risk • Hot or Cold Temperature Alert
fluorescent light interference filter, of installer initiated damage – (< 45° F) warns when temperatures
adaptive baselines and bidirectional are approaching the freezing point
• Fewer Service Calls
temperature compensation. – (> 95° F) warns when temperatures
Incorrect installation of equipment or
are rising too high
• K-Band Microwave Technology changing requirements at the site (e.g.,
K-Band microwave technology delivers new pets) are no longer a problem with: • Commercial Dealer—Additional
sharp detection without holes or weak – Automatic walk test mode turns Benefits
spots. The custom-made source offers on the walk test LED for ten – New longer range patterns allow
pattern shaping to fill the protected area minutes. Walk test mode can also more wireless options
with a broad, balloon-shape that be triggered with a flashlight. – Colder operation down to -4º F (-20º C)
matches the PIR pattern. It also offers – Remotely programmable sensitivity for use in unheated areas
pattern containment to reduce the – Longer battery life – High or low temperature detection
penetration of microwave energy – End-user replaceable batteries – Look down option provides
through walls. – Black bug guard means 15% fewer increased security right below
false alarms due to bright lights the detector
• Faster and Easier to Install
directed into the PIR – Back tamper switch—required
Specific features that contribute to this
– UV protected lenses for commercial certificated installations
benefit include:
– Automatic walk test • Same Family Look
– Flashlight walk test Dealers can install one family look
– Remotely programmable sensitivity whether they use hardwired, V-Plex® or
– Circuit board does not need to be wireless in order to complete the job. In
removed to install on wall addition, if the dealers need to mix and
3. 5898
WIRELESS K-BAND DUAL TEC MOTION SENSOR
DETECTION PATTERNS
50'/15m Wide Angle Lens 35'/11m Animal Immune Lens
5898 DUAL TE C 5898 DUAL TE C
Top View Top View
50' x 60', (15m x 18m); 90° wide angle 35' x 40', (11m x 12m); 90° wide angle
Side View Side View
2X 0.65 2X 0.65
[1.7] [1.7]
4.92
[12.5]
3.63
[9.2]
3.35 0.69
[8.5] [1.8]
1.38
[3.5]
3.63
[9.2] 2.89
[7.3]
3.35
[8.5]
2.95
[7.5]
2.05
[5.2]
4. 5898
WIRELESS K-BAND DUAL TEC MOTION SENSOR
SPECIFICATIONS
• Detection Method • Mounting Height • Fluorescent Light Filter
Dual Technology Sensor with – 7' to 9' (2.1m to 2.7m) – 50 Hz or 60 Hz, selectable
– Dual Element Passive Infrared • Tamper Switch • Dimensions
– K-Band Microwave – Front cover and back tamper – W = 2.95" (7.5cm)
• Range • Sensitivity – H = 4.92" (12.5cm)
– 50' x 60' (15m x 18m); 90° wide angle – Remotely selectable – D = 2.05" (5.2cm)
- 44 zones (22 long range, 12 - Loop 1 = Pulse count 2 [50 lbs or • Weight
intermediate, 6 lower, 4 look-down) 100 lbs of pet immunity – 7.55 oz packaged product
– 35' x 40' (11m x 12m); 90° wide angle - Loop 2 = Pulse count 1 [0 lbs of (0.21407 kg)
- 102 zones (44 long range, 36 pet immunity] • Includes:
intermediate, 18 lower, 4 look-down) • Self Test – Mounting hardware
• Power – Internally checks the PIR, temperature – Lens masking
– Four 1.5V AA, Energizer L91,
® compensation and pyroelectric circuits – Four 1.5V Lithium AA batteries
Honeywell 462 disabling the RF supervision signal if – 50' x 60' wide area lens (installed)
• RF Frequency six consecutive self tests fail – 35' x 40' animal immune lens (included)
– 345 MHz • Temperature Detection (Selectable) • Approvals/Listings
• Operating Temperature – Low temperature —FCC part 15, Class B verified
– For indoor use environment - Fault = < 45° F (7° C) for > 20 to —IC, RSS-210, Class B verified
-4° F to 131° F (-20° C to 55° C) 60 minutes —C-Tick
• Relative Humidity, Non-condensing - Restore = > 48° F (9° C) for > 20 —UL Listed to UL639
– 95% max to 60 minutes —cUL Listed to ULC-S306
• Detectable Walk Rate – High temperature Battery Life Curve*
– 0.7 – 7 ft/Sec. (0.2 – 2.0m/Sec.) - Fault = > 95° F (35° C) for > 20 The 5898 has a battery life of up to
• Temperature Compensation to 60 minutes 4.5 years (in a typical installation with an
– Advanced Dual Slope - Restore = < 92° F (33° C) for > average of 80 motion events per day).
• Pet/Animal Immunity 20 to 60 minutes
*Battery life may vary depending on
– 0, 50 or 100 lbs (0, 22.6, or 45 Kg) • Microwave Frequencies
alarms per day and environmental
When used with the animal immune – 24.125 GHz (K-Band)
conditions of the installation site.
lens (included)
