7. STT The Scalable Test Toolkit STT • Fully independent or stackable test modules • Ultra-bright LCD touch screen • Intuitive User Interface • Familiar Microsoft Windows XP® Interface • Fixed IP or DHCP terminal emulation • Remote operation or standalone capabilities with PC • Several power supply options • Optional battery for uninterrupted testing
8.
9.
10.
11. STT 10G Ethernet Powerful Multi-Port Testing up to 10Gbps • Full line rate traffic generation for Ethernet up to 10 Gigabits, LAN (10.3 Gbps) & WAN (9.95 Gbps) • Multi-port and multi-rate capability for network element pre-qualification testing • RFC 2544: Throughput, latency, frame loss, and back-to-back tests* • BER testing at Layer 1, Layer 2, and Layer 3 (IP) for Gigabit Ethernet and IP services with received measurement filter • IP verification with Ping, Trace Route, Echo Response, and IP Throughput across a routed network • Class of Service (CoS) (via VLAN P-bit) and IP Type of Service (TOS)/DSCP traffic prioritization settings • Fibre Channel buffer-to-buffer credit management • Bidirectional monitoring of live Ethernet networks • Packet capture & decoding up to Layer 7 • Control/Respond Loopback feature to loop-up/down a far end STT or MTT * GigE & 10GbE only
12. STT xWDM OSA, Wavelength Converter, Wavelength Drop • Economical 3-in-1 test tool: wavelength converter, channel drop, and OSA • TLS with wavelength conversion (C and L-Bands) • Wavelength drop to isolate any single wavelength and drop it to a network analyzer • OSA, OSNR, power level, frequency, channel number, and more • Dual ports for simultaneously testing multiple input signals • ROADM: full band OSA, set, measure, analyze and save data for 40 individual channels in just eight minutes
13. STT DTM CD and PMD Measurements The STT DTM (Dispersion Test Module) gives network planners a cost-effective tool to analyze new and existing fibers for their dispersion characteristics in order to determine if those fibers can support higher transmission bit rates and DWDM. Utilizing high sensitivity and high-speed photon counting detection technology, it measures both Chromatic Dispersion (CD) and Polarization Mode Dispersion (PMD) according to ITU-T recommendations.
16. SunSet 10G A complete STM-64/OC192 test set • 1.5/2 Mbps up to 10 Gbps (OC-192/STM-64 ) • OC-1/3/12/48 (STM-0/1/4/16) single and dual wavelengths: 1310 nm and 1550 nm • SONET/SDH transmission: BERT, overhead byte analysis and control, pointer monitoring and adjustment, APS timing, ITU-T performance monitoring • T-carrier/PDH transmission testing with electrical ports • RS-232 c and Ethernet ports for remote operation • 5 lbs. (2.2 kg) and battery-operated
17. SunSet SDHc STM-16J SunSet SDH with Jitter and Wander • 1.5/2 Mbps to 2.5 Gbps (STM-16) • Single and dual wavelengths: 1310 nm and 1550 nm • SDH/PDH transmission testing: BERT, overhead byte analysis and control, pointer monitoring and adjustment, APS testing, tandem connection monitoring • Error performance analysis per ITU-T G.821, G.826 , G.828, G.829, M.2100, M.2101, M.2110 • SDH/PDH jitter generation and measurement • Wander generation and measurement • Service verification: ATM (T1/E1 to STM-16), VF, GSM, Frame Relay, ISDN, V.5x, and SS7 • RS-232 c and Ethernet ports for remote operation • Pulse Mask Analysis at 1.5 Mbps, 2 Mbps, 34 Mbps, and 45 Mbps • Under 4 lbs. (1.8 kg) and battery-operated
18. SunSet E20c SunSet E20c the 2M Test Set • Dual E1 transmit and receive • E1 measurements including frequency/level, BERT, G.821/G.826 /M.2100, and pulse mask • Datacom testing at V.35, X.21, RS-232 sync/async, RS-449, G.703 codirectional interfaces • ITU-T compliant jitter measurement and generation • VF measurement and generation • Service verification: SS7, GSM, GPRS, Frame Relay, V.5x, ISDN, X.25, R2 • 3 lbs. (1.3 kg)
19. SunLite E1 Pocket-size E1 unit • Single E1 transmit and receive, plus clock input • E1 measurements including frequency/level, BERT, and G.821/G.826 /M.2100 • VF measurement and generation • Configuration and measurement storage • 0.8 lb (0.4 kg)
21. SunLite GigE SunLite GigE & GigE Responder * • Full 10/100 Mbps and Gigabit Ethernet (1000 Mbps) line rate traffic generation • Performs throughput, latency, frame loss, and back-to-back tests per RFC 2544 • BER testing at Layer 1, Layer 2, and Layer 3 (IP) for Gigabit Ethernet and IP services • IP verification with Ping, Trace Route, and IP Throughput across a routed network • Generate up to 8 traffic flows with different MAC address, VLAN tags, MPLS, IP address, payload and bandwidth configurations • Class of Service (CoS) (via VLAN P-bit) and IP Type of Service (ToS)/DSCP traffic prioritization settings • 10/100/1000BASE-T and 1000BASE-X dual media test interfaces • Control/Respond Loopback feature to loop-up/down a far end STT, MTT Ethernet test modules or GigE Responder • Test Profiles for fast and efficient test set configuration and operation * Same size low cost loopback device only
23. CM1000 Analog and Digital SLM and DOCSIS ® Network Analyzer • Full analog/digital SLM with cable modem testing plus digital video tests including: MER, BER and constellation • Deep interleave, BPI+ with manufacturer certificates and SNMP are standard features • VoIP option for verifying and testing VoIP network services, QoS voice and best effort signaling. Includes MOS, R-Factor, lost packets, latency and jitter • Web browser option for web-based applications such as workforce management • Proprietary BkER test characterizes the upstream path without a headend unit • Plug-in modules include a 16 QAM Upstream Signal Generator and TDR options • CM1000 supports Annex B and Annex C
24. CM4000 Cable Explorer - TDR (Time Domain Reflectometer) Module • TDR functions: – Distance, cable loss, return loss, and total loss measurements – Auto-test or manual-test mode * CE4000 TDR Module in place with the CM1000
25. CM2000 Cable Modem Network Analyzer • Up to 30 Mb/s throughput • Customizable verification and troubleshooting capabilities • Validates networks capacity for increased bandwidth and high QoS demands of next-generation services • Easy-to-use interface and best display of any instrument in its class • Open architecture provides flexibility for future service requirements • Windows CE® operating system offers user familiarity and flexibility for future expansion • Internet Explorer® browser provides web access to back office and diagnostic systems • PC emulation and Ethernet testing tools eliminate the need for PCs in the field
