1. Simulation Using Isim
by: Samuel Neseem
Mina Yousry

2. Copyrights
Copyright © 2012 to authors. All rights reserved
• All content in this presentation, including charts, data, artwork and logos
(from here on, "the Content"), is the property of Samuel Neseem and
Mina Yousry or the corresponding owners, depending on the
circumstances of publication, and is protected by national and
international copyright laws.
• Authors are not personally liable for your usage of the Content that
entailed casual or indirect destruction of anything or actions entailed to
information profit loss or other losses.
• Users are granted to access, display, download and print portions of this
presentation, solely for their own personal non-commercial use, provided
that all proprietary notices are kept intact.
• Product names and trademarks mentioned in this presentation belong to
their respective owners.
2

3. Objective
• Using Isim to compile and simulate a given
design unit
• Skills gained:
– Identify basic Simulator flow
3

4. Outline
• Creating Project
– Writing VHDL code
– Checking syntax
• Interactive Simulation
4

5. Creating Project
Step 1:
Open Xilinx ISE ->
File > New Project

6. Creating Project Cont’d.
Step 2:
Set Project Location
And Project Name
as shown then press
Next

7. Creating Project Cont’d.
Step 3:
• Set simulator
options to Isim then
press Next -> finish

8. Write VHDL Code
Step 1:
Right click on project
node then select
New Source
Note:
if you have an
existing VHDL
file you can select
Add Source
Step 2:
- Set File Name and
Location
- Select VHDL Module
then press Next

9. Write VHDL Code Cont’d.
Step 3:
press Next
Note:
-you can change
entity name and
architecture name
-also you can add
ports as shown
and then press
Next -> finish

10. Write VHDL Code Cont’d.
Step 4:
Write your VHDL
code here

11. Check Syntax
To Check Syntax Follow
Steps as shown
Note:
if there is any error it will
appear Here

12. Simulation
To Open simulation
window Follow
Steps as shown

13. Simulation Cont’d.
1-Project ports and signals
2-Zooming
3-Restart
4-Run for the time specified
on the toolbar

14. Simulation Cont’d.
Force clock to i/p port:
Right click on the port then
select Force clock
Then set options and press
OK

15. Simulation Cont’d.
Force constant value to i/p port:
Right click on the port then
select Force constant
Then set the value and press
OK

16. Simulation Cont’d.

17. Simulation Cont’d.
To show Variables in a proces
Follow Steps as shown
where #3 is process in your
project

18. Contacts
• You can contact us at:
– http://www.embedded-tips.blogspot.com/
18