Mipa 2K-Plastic-Grundierfiller primer-surfacer product info
1. Mipa 2K-Plastic-Grundierfiller gb 6/01011
page 1 / 1
Product Information
Fast drying primer-surfacer with direct adhesion to all plastic materials usually found in
automotive industry (PP-EPDM, ABS, PC, ABS-PC, PMMA, PBTP, PA, SAN, PUR, PPO,
PVC, GfK, SMC). To be used as adhesion promoter and filler in an unique operation. Wet on
wet application is also possible. Recoatable with all 1K- and 2K-paints.
Consumption: 10 - 11 m²/l by 25 m.
Colour dark grey (approx. RAL 7011)
Mixing ratio 4 : 1 by volume; 5 : 1 by weight
Hardener Mipa 2K-Härter H 10, MS 10, Multi
Thinner Mipa 2K-Verdünnung normal or Mipa 2K-Verdünnung kurz;
Addition: 5 - 10 %
Spraying viscosity 20° C 16 - 18 s 4 mm DIN
Application Spraying pressure Spraying nozzle Spraying operations
Air/Flow jar 3 - 4 bar 1,4 - 1,5 mm 2
HVLP 2,5 - 3 bar 1,3 - 1,6 mm 2
(nozzle int. pres.: 0,7 bar)
Pot life 4-5h
Coat thickness / dry film 20 - 30 m
Curing time /flash off time 10 minutes
Dry recoat time dust dry set to touch full hardeness
Object temp. 20° C 30 min. 25 - 30 min. 60 - 70 min.
Object temp. 60° C 15 min. 10 - 15 min. 20 - 30 min.
Recommandations:
Processing conditions: Do not apply below + 10°C and more than 80 % relative air humidity.
By longer storage periods an oil film can occur. In this situation stir the content to restore the
initial consistency.
Storage life: at least 3 years, if stored in tightly closed original containers.
Please consider the recommendations for plastic coating “Lackieraufbau L7
Kunststofflackierung”
Marking VbF Hazardous materials ordinance
Mipa 2K-Plastic-Grundierfiller AI highly inflammable; Xn
This data sheet is for information purpose only. To our knowledge the data provided complies with the latest standard and is based
on years of experience in the manufacture of our products. However the data is not binding and without warranty.
MIPA AG · D-84051 Essenbach · Tel. 08703/9220 · Telefax 08703/922100