INDOOR AIR QUALITY can be described and measured in indicators in specifying the buildings social performance contributing to the aspect HEALTH and COMFORT. The presentation positions the INDOOR AIR QUALITY in the USE STAGE of the building: the indoor air quality for the building USER is of importance during during "regular" use but also during maintenance, repair and replacement activities, etc. A check list approach allows a comprehensive assessment per information module on the basis of a building specific and use specific scenario.

1. indoor air quality
health & comfort aspect in the social performance assessment of buildings
EN16309
(standardisation by CEN TC350 WG5)

2. Indoor Air Quality – a social performance aspect
How and where is this taken into account
in the sustainability assessment of buildings ?
EN16309
SUSTAINABILITY OF CONSTRUCTION WORKS — ASSESSMENT OF SOCIAL
PERFORMANCE OF BUILDINGS — METHODOLOGY

3. Sustainability assessment
• Prerequisite:
compliance to meet present and future needs on functional and
technical demands
• Based on 3 dimensions:
See next slide
• Based on the building LIFE CYCLE: 3 life cycle stages
– `Before use stage`, `Use stage` and `After use stage`

4. CEN TC350 standardisation
Sustainability
ECO
SOC
ECON
CEN TC350 Standards
for works
EuroCodes
Technical Design
Funktional Design
CEN TC350
Standards only quantify
aspects and impacts
CPR
305/2011
A prerequisite for sustainability are the 6 Basic Requirements for Construction Works
• Without meeting the functional needs there is no sustainability
• Without meeting the technical needs there is no sustainability
4

5. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
B1 - 7
C1 - 4
D
PRODUCT
STAGE
CONSTRUCTION
PROCESS
USE STAGE
END OF LIFE STAGE
Benefits and loads beyond the
system boundary
Waste processing for reuse,
recovery or and recycling
Disposal
C3
C4
Refurbishment
Replacement
Operational Water use
Repair
B7
Maintenance
Operational Energy use
Use
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Construction - Installation process
B1
A5
A4
A1-A3
Transport
A4 - 5
Raw Material Supply
Transport
Manufacturing
A1 - 3
After being disposed the
construction products or
materials might -have a
Reuse
Recovery future value in another
Recycling life cycle
potential
5

6. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
USE STAGE
USE
END OF LIFE STAGE
Benefits and loads beyond the
system boundary
B6
Operational Energy use
Transport
Waste processing for reuse,
recovery or and recycling
Disposal
B7
Operational Water use
C2
C3
C4
B5
Deconstruction
B4
C1
B3
Construction - Installation process
B2
A5
A4
A1-A3
B1
Refurbishment
CONSTRUCTION
PROCESS
Replacement
PRODUCT
STAGE
Repair
D
Maintenance
C1 - 4
Use
B1 - 7
LIFE CYCLE STAGE:
Transport
A4 - 5
Raw Material Supply
Transport
Manufacturing
A1 - 3
Reuse Recovery Recycling potential
6

7. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
LIFE CYCLE STAGE:
B1 - 7
LIFE CYCLE STAGE:
C1 - 4
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
Benefits and loads beyond the
system boundary
Refurbishment
Disposal
Replacement
B7
Operational Water use
C4
Repair
Waste processing for reuse,
recovery or and recycling
Maintenance
Operational Energy use
C3
Use
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Construction - Installation process
Transport
B1
A5
A1-A3
A4
Raw Material Supply
Transport
Manufacturing
CONSTRUCTION
BEFORE USE
PROCESS
Reuse Recovery Recycling potential
7

8. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
LIFE CYCLE STAGE:
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
Refurbishment
Disposal
Replacement
B7
Operational Water use
C4
Repair
Waste processing for reuse,
recovery or and recycling
Maintenance
Operational Energy use
C3
Use
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Construction - Installation process
Transport
B1
A5
A1-A3
A4
Raw Material Supply
Transport
Manufacturing
CONSTRUCTION
BEFORE USE
PROCESS
Reuse Recovery Recycling potential
8

9. Assessment ,Information and Scenarios
• The assessment and the information is structured and presented in
INFORMATION MODULES

10. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
LIFE CYCLE STAGE:
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
Refurbishment
Disposal
Replacement
B7
Operational Water use
C4
Repair
Waste processing for reuse,
recovery or and recycling
Maintenance
Operational Energy use
C3
Use
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Construction - Installation process
Transport
B1
A5
A1-A3
A4
Raw Material Supply
Assessment
Transport
&
Manufacturing module
Information
CONSTRUCTION
BEFORE USE
PROCESS
Reuse Recovery Recycling potential
10

11. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
LIFE CYCLE STAGE:
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
Refurbishment
Disposal
Replacement
B7
Operational Water use
C4
Repair
Waste processing for reuse,
recovery or and recycling
Maintenance
Operational Energy use
C3
Use
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Construction - Installation process
Assessment
&
Transport
Information module
B1
A5
A1-A3
A4
Raw Material Supply
Assessment
Transport
&
Manufacturing module
Information
CONSTRUCTION
BEFORE USE
PROCESS
Reuse Recovery Recycling potential
11

12. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
LIFE CYCLE STAGE:
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
Refurbishment
Disposal
Replacement
B7
Operational Water use
C4
Repair
Waste processing for reuse,
recovery or and recycling
Maintenance
Operational Energy use
C3
Use
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Assessment
Construction - Installation process
&
Information module
Assessment
&
Transport
Information module
B1
A5
A1-A3
A4
Raw Material Supply
Assessment
Transport
&
Manufacturing module
Information
CONSTRUCTION
BEFORE USE
PROCESS
Reuse Recovery Recycling potential
12

13. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
LIFE CYCLE STAGE:
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
Refurbishment
Disposal
Replacement
B7
Operational Water use
C4
Repair
Waste processing for reuse,
recovery or and recycling
Maintenance
Operational Energy use
C3
Assessment
&
Use
Information module
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Assessment
Construction - Installation process
&
Information module
Assessment
&
Transport
Information module
B1
A5
A1-A3
A4
Raw Material Supply
Assessment
Transport
&
Manufacturing module
Information
CONSTRUCTION
BEFORE USE
PROCESS
Reuse Recovery Recycling potential
13

14. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
LIFE CYCLE STAGE:
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
Refurbishment
Disposal
Replacement
B7
Operational Water use
C4
Repair
Waste processing for reuse,
recovery or and recycling
Maintenance
Operational Energy use
C3
Assessment
&
Use
Information module
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Assessment
Construction - Installation process
&
Information module
Assessment
&
Transport
Information module
B1
A5
A1-A3
A4
Raw Material Supply
Assessment
Transport
&
Manufacturing module
Information
CONSTRUCTION
BEFORE USE
PROCESS
Reuse Recovery Recycling potential
14

15. A1-A3
Assessment
Deconstruction&
Information module
B7
Operational Water use
C1
C4
B4
C3
B3
B5
Repair
Replacement
Refurbishment
Assessment
&
Disposal
Information module
Transport
A1 - 3
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
CONSTRUCTION
BEFORE USE
PROCESS
Assessment
&
Information module
Assessment
Waste processing for reuse,
&
recovery or and recycling
Information module
B2
Maintenance
A4 - 5
LIFE CYCLE STAGE:
C2
Operational Energy use
B1
Assessment
&
Use
Information module
Assessment
Construction - Installation process
&
Information module
Assessment
&
Transport
Information module
B6
A5
A4
Raw Material Supply
Assessment
Transport
&
Manufacturing module
Information
BUILDING ASSESSMENT INFORMATION
BUILDING LIFE CYCLE INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
Reuse Recovery Recycling potential
15

16. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
B1 - 7
LIFE CYCLE STAGE:
C1 LIFE CYCLE4 STAGE:
D
PRODUCT
STAGE
USE STAGE
USE
END OF LIFE STAGE
AFTER USE
Benefits and loads beyond the
system boundary
Assessment
&
Disposal
Information module
After being disposed the
construction products or
materials might -have a
Reuse
Recovery future value in another
Recycling life cycle
potential
C4
C3
Refurbishment
Replacement
Operational Water use
Repair
B7
Maintenance
Operational Energy use
Assessment
&
Use
Information module
B6
Assessment
&
Information module
Assessment
Waste processing for reuse,
&
recovery or and recycling
Information module
B5
Transport
B4
Assessment
Deconstruction&
Information module
B3
C1
B2
Assessment
Construction - Installation process
&
Information module
Assessment
&
Transport
Information module
B1
A5
A1-A3
A4
Raw Material Supply
Assessment
Transport
&
Manufacturing module
Information
CONSTRUCTION
BEFORE USE
PROCESS
C2
A4 - 5
LIFE CYCLE STAGE:
16

17. Assessment ,Information and Scenarios
• The assessment and the information is structured and presented in
INFORMATION MODULES
• Scenarios are ESSENTIAL specifications to each information module

18. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
USE STAGE
END OF LIFE STAGE
Benefits and loads beyond the
system boundary
B6
Operational Energy use
Transport
Waste processing for reuse,
recovery or and recycling
Disposal
B7
Operational Water use
C2
C3
C4
B5
Deconstruction
B4
C1
B3
Construction - Installation process
B2
A5
A4
A1-A3
B1
Refurbishment
CONSTRUCTION
PROCESS
Replacement
PRODUCT
STAGE
Repair
D
Maintenance
C1 - 4
Use
B1 - 7
Transport
A4 - 5
Raw Material Supply
Transport
Manufacturing
A1 - 3
A scenario to each of the life cycle stages
–
A scenario to each of the information modules
Reuse -
A scenario for info
Recovery Recycling -the
beyond
potential
product/building life
cycle stage
18

19. BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
USE STAGE
END OF LIFE STAGE
Benefits and loads beyond the
system boundary
B6
Operational Energy use
Transport
Waste processing for reuse,
recovery or and recycling
Disposal
B7
Operational Water use
C2
C3
C4
B5
Deconstruction
B4
C1
B3
Construction - Installation process
B2
A5
A4
A1-A3
B1
Refurbishment
CONSTRUCTION
PROCESS
Replacement
PRODUCT
STAGE
Repair
D
Maintenance
C1 - 4
Use
B1 - 7
Transport
A4 - 5
Raw Material Supply
Transport
Manufacturing
A1 - 3
Reuse Recovery Recycling potential

20. EN16309 = 1st. Generation of the standard.
The conditions, for making a European standard on the social
performance assessment, could not be met yet for taking into account
all life cycle stages
EN16309
ONLY PROVIDES THE METHODOLOGY FOR
THE ASSESSMENT OF THE USE STAGE

21. SOCIAL PERFORMANCE
BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
B1 - 7
C1 - 4
D
PRODUCT
STAGE
CONSTRUCTION
PROCESS
USE STAGE
END OF LIFE STAGE
Benefits and loads beyond the
system boundary
Disposal
Refurbishment
B7
Operational Water use
C4
Replacement
Waste processing for reuse,
recovery or and recycling
Repair
Operational Energy use
C3
Maintenance
B6
Transport
B5
C2
B4
Deconstruction
B3
C1
B2
Construction - Installation process
B1
Use
USE STAGE
A5
A4
A1-A3
Transport
A4 - 5
Raw Material Supply
Transport
Manufacturing
A1 - 3
Reuse Recovery Recycling potential

22. SOCIAL PERFORMANCE
BUILDING ASSESSMENT INFORMATION
SUPPLEMENTARY INFORMATION
BEYOND
THE BUILDING LIFE CYCLE
BUILDING LIFE CYCLE INFORMATION
A1 - 3
A4 - 5
B1 - 7
C1 - 4
D
PRODUCT
STAGE
CONSTRUCTION
PROCESS
USE STAGE
END OF LIFE STAGE
Benefits and loads beyond the
system boundary
Waste processing for reuse,
recovery or and recycling
Disposal
C4
C2
C3
Transport
Operational Water use
Repair
B7
Maintenance
Operational Energy use
Use
B6
Deconstruction
B5
C1
B4
Refurbishment
B3
Replacement
B2
Construction - Installation process
Transport
B1
A5
A1-A3
A4
Raw Material Supply
Transport
Manufacturing
7 information
modules
USE STAGE
Info Module USE is most important
but can only functionReuse - with
Recovery
Recycling maintenance, repair,potential
etc.

23. Identify Purpose of
Goal
building-related aspects for the fabric
Step 1
the Assessment
Intended Use
user- and control system-related aspects
accessibility
Step 2
health comfort
Specification of the
Object of
Assessment security
safety
social building-performance indicators4
clause
Functional Equivalent
Reference Study Period
System Boundary
Object of Assessment
relevant for the operation of the building
health comfort
clause 5
safety security
adaptability
Step 3
Scenarios for the
impact neighbourhood
Building Use Stage
Object of Assessment – Time related characteristics
impact neighbourhood
Scenarios for the information modules B1 and B2 – B7
Step 4
Evaluating aspects
and indicators
Checklist
clause 6
clause 7, 8
Annex B
23

24. building-related aspects for the fabric
Accessibility
Access to building services
Accessibility for people with specific needs
Safety and Security
Resistance to climate change
Accidental actions (earthquake, explosions,
fire and traffic impacts
Personal safety and security against intruders
and vandalism
Security against interruptions of utility supply
Health & Comfort
Thermal characteristics
Adaptability
Characteristics of indoor air quality
Acoustic characteristics
Impact on neighbourhood
Characteristics of visual comfort
Noise
Spatial characteristics
Emissions
Glare/overshadowing
Shocks / vibrations
24

25. user- and control system-related aspects
relevant for the operation of the building
Health & Comfort
Thermal comfort
Indoor air quality
Visual comfort
Safety and Security
Security against intruders and vandalism
Impact on neighbourhood
Emissions
25

26. Identify Purpose of
Goal
building-related aspects for the fabric
Step 1
the Assessment
Intended Use
user- and control system-related aspects
accessibility
Step 2
social building-performance indicators4
clause
Functional Equivalent
Reference Study Period
System Boundary
Object of Assessment
health comfort
Specification of the
Object of
Assessment security
safety
relevant for the operation of the building
health comfort
clause 5
safety security
adaptability
Step 3
Scenarios for the
impact neighbourhood
Building Use Stage
Object of Assessment – Time related characteristics
impact neighbourhood
Scenarios for the information modules B1 and B2 – B7
Step 4
Evaluating aspects
and indicators
Checklist
clause 6
clause 7, 8
Annex B
Start
assessment
of aspect
Is the aspect relevant for
the design of the object of
assessment?
no
yes
Guided by a checklist
stop
assessment of
aspect
Is there a regional,
national or European
requirement
or
a client requirement
yes
no
Follow the methodology in clause
7.2-7.7
Follow the methodology in clause
7.2-7.7
Specify the minimum requirement
and/or give details of client’s
requirement
is the indicator
assessed ?
Evaluating indicators per
information module B1-B7
no
Have measures
been taken
exceeding the
requirement ?
yes
no
yes
Describe
measures
that have
been taken
Report obtained
performance
and references
Describe
measures
that have
been taken
Report obtained
performance
and references
Report obtained
performance
and references
Justify
INA
Report
INA
Justify
Mark as
NR
(not
relevant)
Report
for all aspects- all indicators
26

27. Annex B - Table for Module B 1: checklist on the social indicators for the information module
"Use stage"
Module B1
Clause
7.2 – 7.7
indicators for the aspect related to
social performance as listed in Table 1
in clause 7.1
 the indicators 1-16 are buildingrelated aspects for the fabric
 the indicators 17-21 are user- and
control system-related aspects
relevant for the operation of the
building
Aspect Accessibility, see 7.2
1. Accessibility for people with specific
needs (see 7.2.2)
2. Access to building services
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1
5. Characteristics of indoor air quality,
see 7.4.3.1
6. Acoustic characteristics,
see 7.4.4
7. Characteristics of visual comfort,
see 7.4.5.1
a
b
c
Is the aspect
relevant for
the design of
the object of
assessment ?
Is there a nationalregional or
European
requirement
applicable ?
(yes/no)
(yes/no)
If yes - give
reference to the
relevant regulation)
Specify the minimum
requirement according
the prevailing
regulation or if not
regulated give details
of any requirements
made in the clients
brief
d
Have measures
been taken for
exceeding the
requirements
given in c)
yes/no)
e
f
Give value for indicator or
briefly specify measures
taken to achieve the
stated performance ?
Give Reference to
relevant documentation to
support e)

28. Annex B - Table for Module B 1: checklist on the social indicators for the information module
a
b
Module stage"
"Use B1
Module B1
Clause
7.2 – 7.7
indicators for the aspect related to
social performance as listed in Table 1
in clause 7.1
 the indicators 1-16 are buildingrelated aspects for the fabric
 the indicators 17-21 are user- and
control system-related aspects
relevant for the operation of the
building
Aspect Accessibility, see 7.2
1. Accessibility for people with specific
needs (see 7.2.2)
2. Access to building services
see 7.2.3
a
Clause b
Is the aspect
there
7.2 –Is7.7 a nationalrelevant for
regional or
c
f
Is the aspect e Is there a national- Specify
Specify the minimum
Have measures
Give value for indicator
relevant for specify measuresor Give Reference to requirem
regional relevant documentation to
or
requirement according
been taken for
briefly
the prev
the designindicators for the aspect related to exceeding the design ofachieveEuropean
of
European
the prevailing
the
taken to
the
support e)
the object of
requirement
regulation or if not
requirements
stated performance ?
requirement
regulatio
social performanceregulated give details given in c) the object of
as listed in Table 1
assessment ?
applicable ?
of any requirements
assessment ?
applicable ?
regulate
(yes/no) in clause 7.1
(yes/no)
made in the clients
yes/no)
If yes - give
of any re
brief
(yes/no)
(yes/no)
 thereference to the 1-17 are buildingindicators
made in
relevant regulation)
If yes - give
related aspects for the fabric
brief
reference to the
 the indicators 18-22 are user- and
relevant regulation)
control system-related aspects
relevant for the operation of the
building
Aspect Accessibility, see 7.2
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1
5. Characteristics of indoor air quality,
see 7.4.3.1
6. Acoustic characteristics,
see 7.4.4
7. Characteristics of visual comfort,
see 7.4.5.1
1. Accessibility for people with specific
needs (see 7.2.2)
2. Access to building services
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
d

29. Clause
Is the aspect
Is there a national- Specify th
7.2 – B 1: checklist on the social indicators for the information modulerequireme
7.7
relevant for
regional or
Annex B - Table for Module
the design of
European
the prevai
"Use stage"
indicators for the aspect related to
the object of
regulation
asocial performance as listed in Table 1
b
c
d
erequirement
f
Module B1
assessment value forapplicableGive Reference to regulated
?
?
in clause 7.1national- Specify the minimum Have measures
Clause
Is the aspect
Is there a
Give
indicator or
7.2 – 7.7
of any
relevant for
regional or
requirement according
been taken for
specify measures
(yes/no) brieflyto achieve the
(yes/no) relevant documentation to req
Aspect Accessibility, see 7.2
 of European
are buildingthe design the indicators 1-17the prevailing
exceeding the
taken
support e)
indicators for the aspect related to
made in th
requirement
or if
stated performance ?
1. social performance people with specific the object of
Accessibility for as listed in Table 1
If yes - give
related aspects forregulation give details requirements
the fabricnot
assessment ?
applicable ?
regulated
given in c)
brief
in clause(see 7.2.2)
needs 7.1
of
reference to the
(yes/no) the indicators 18-22 any requirements
(yes/no)
are the clientsand yes/no)
user the indicators 1-16 are buildingmade in
2. Accessaspects for the fabric
If yes - give
relevant regulation)
related to building services
brief
control system-related aspects
see 7.2.3
 the indicators 17-21 are user- and
control system-related aspects
Aspect Adaptability, see 7.3
relevant for the operation of the
building
3. Adaptability
Aspect Accessibility, see 7.2
Aspect Health and comfort, see 7.4
1. Accessibility for people with specific
4. Thermal(see 7.2.2)
characteristics,
needs
see 7.4.2.1
2. Access to building services
5. Characteristics of indoor air quality,
see 7.2.3
see 7.4.3.1
Aspect Adaptability, see 7.3
6. Acoustic characteristics,
3. Adaptability
see 7.4.4
Aspect Health and comfort, see 7.4
7. Characteristics of visual comfort,
4. Thermal characteristics,
see 7.4.5.1
see 7.4.2.1
8. Spatial characteristics,
5. Characteristics of indoor air quality,
see 7.4.6
see 7.4.3.1
Impacts on neighbourhood, see 7.5
6. Acoustic characteristics,
see 7.4.4
9. Noise,
see 7.5.2
7. Characteristics of visual comfort,
see 7.4.5.1
10. Emissions,
reference to the
relevant regulation)
relevant for the operation of the
building
Aspect Accessibility, see 7.2
1. Accessibility for people with specific
needs (see 7.2.2)
2. Access to building services
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1

30. Clause
Is the aspect
Is there a national- Specify th
7.2 – B 1: checklist on the social indicators for the information modulerequireme
7.7
relevant for
regional or
Annex B - Table for Module
5. Characteristics of indoor air quality,
the design of
European
the prevai
"Use stage"
indicators for the aspect related to
see 7.4.3.1
the object of
regulation
asocial performance as listed in Table 1
b
c
d
erequirement
f
Module B1
6. Acoustic characteristics,
assessment value forapplicableGive Reference to regulated
?
?
see 7.4.4
in clause 7.1national- Specify the minimum Have measures
Clause
Is the aspect
Is there a
Give
indicator or
7.2 – 7.7
of any
relevant for
regional or
requirement according
been taken for
specify measures
(yes/no) brieflyto achieve the
(yes/no) relevant documentation to req
7. Characteristics of visual comfort,
 of European
are buildingthe design the indicators 1-17the prevailing
exceeding the
taken
support e)
indicators for the aspect related to
made in th
see 7.4.5.1
the object of
requirement
or if
stated performance ?
social performance as listed in Table 1
If yes - give
related aspects forregulation give details requirements
the fabricnot
assessment ?
applicable ?
regulated
given in c)
brief
clause characteristics,
8. inSpatial 7.1
of
reference to the
(yes/no) the indicators 18-22 any requirements
(yes/no)
are the clientsand yes/no)
user see indicators 1-16 are buildingthe 7.4.6
made in
If yes - give
relevant regulation)
related aspects for the fabric
brief
control system-related aspects
4. Thermal characteristics,
see 7.4.2.1
Impacts on neighbourhood, see 7.5
 the indicators 17-21 are user- and
control
9. Noise, system-related aspects
relevant for the operation of the
see 7.5.2
building
10. Emissions,
Aspect Accessibility, see 7.2
see 7.5.3
1. Accessibility for people with specific
11. Glare/overshadowing,
needs (see 7.2.2)
see 7.5.4
2. Access to building services
see 7.2.3
12. shocks / vibrations,
see 7.5.5
Aspect Adaptability, see 7.3
reference to the
relevant regulation)
relevant for the operation of the
building
Aspect Accessibility, see 7.2
1. Accessibility for people with specific
needs (see 7.2.2)
Aspect Safety and security, see 7.7
3. Adaptability
2. Access to building services
see 7.2.3
13. Resistance to climate change,7.4
Aspect Health and comfort, see see
7.7.2
Aspect Adaptability, see 7.3
4. Thermal characteristics,
see 7.4.2.1
14. Accidental actions (earthquake,
explosions, fire of indoor air quality,
5. Characteristics and traffic impacts),
see 7.7.3
see 7.4.3.1
6. Acoustic characteristics,
15. Personal safety and security
see 7.4.4
against intruders and vandalism,
see 7.7.4
7. Characteristics of visual comfort,
see 7.4.5.1
16. Security against interruptions of
utility supply, see 7.7.5
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1

31. Clause
Is the aspect
Is there a national- Specify th
7.2 – B 1: checklist on the social indicators for the information modulerequireme
7.7
relevant for
regional or
Annex B - Table for Module
10. Emissions,
the design of
European
the prevai
"Use stage"
indicators for the aspect related to
see 7.5.3
the object of
regulation
asocial performance as listed in Table 1
b
c
d
erequirement
f
Module
11. Glare/overshadowing, B1
assessment value forapplicableGive Reference to regulated
?
?
see 7.5.4
in clause 7.1national- Specify the minimum Have measures
Clause
Is the aspect
Is there a
Give
indicator or
7.2 – 7.7
of any
relevant for
regional or
requirement according
been taken for
specify measures
(yes/no) brieflyto achieve the
(yes/no) relevant documentation to req
12. shocks / vibrations,
 of European
are buildingthe design the indicators 1-17the prevailing
exceeding the
taken
support e)
indicators for the aspect related to
made in th
see 7.5.5
the object of
requirement
or if
stated performance ?
social performance as listed in Table 1
If yes - give
related aspects forregulation give details requirements
the fabricnot
assessment ?
applicable ?
regulated
given in c)
brief
in clause 7.1
Aspect Safety and security, see 7.7
of
reference to the
(yes/no) the indicators 18-22 any requirements
(yes/no)
are the clientsand yes/no)
user the indicators 1-16 are buildingmade in
13. Resistance to climatefabric
If yes - give
relevant regulation)
related aspects for the change, see
brief
control system-related aspects
9. Noise,
see 7.5.2
 7.7.2
the indicators 17-21 are user- and
control system-related aspects
14. Accidental actions (earthquake,
relevant for the operation of the
explosions, fire and traffic impacts),
building
reference to the
relevant regulation)
relevant for the operation of the
building
see 7.7.3
Aspect Accessibility, see 7.2
15. Personal safety and security
1. Accessibility for people with specific
against intruders and vandalism,
needs (see
see 7.7.4 7.2.2)
2. Access to building services
16. Security against interruptions of
see 7.2.3
Aspect Accessibility, see 7.2
1. Accessibility for people with specific
needs (see 7.2.2)
utility supply, see 7.7.5
Aspect Health and comfort, see 7.4
3. Adaptability
2. Access to building services
see 7.2.3
17. Thermal comfort, comfort, see 7.4
Aspect Health and
see 7.4.2.2
Aspect Adaptability, see 7.3
Aspect Adaptability, see 7.3
4. Thermal characteristics,
see 7.4.2.1
18. Indoor air quality,
see 7.4.3.2
5. Characteristics of indoor air quality,
see comfort,
19. Visual7.4.3.1
see 7.4.5.2
6. Acoustic characteristics,
see 7.4.4
Impacts on neighbourhood, see 7.5
7. Characteristics of visual comfort,
20. Emissions,
see 7.4.5.1
see 7.5.3.1
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1

32. Annex B - Table for Module B 1: checklist on the social indicators for the information module
"Use stage"
Module B1
Module B1
Clause
7.2 – 7.7
indicators for the aspect related to
social performance as listed in Table 1
in clause 7.1
 the indicators 1-16 are buildingfor the aspect related to
related aspects for the fabric
formance as listed in Table 1
 the indicators 17-21 are user- and
7.1 control system-related aspects
relevant for the operation of the
cators building are building1-17
aspects for the fabric 7.2
Aspect Accessibility, see
1. Accessibility for people and
cators 18-22 are user- with specific
needs (see 7.2.2)
system-related aspects
2. Access to building services
for thesee 7.2.3
operation of the
Aspect Adaptability, see 7.3
3. Adaptability
ccessibility, see 7.2
Aspect Health and comfort, see 7.4
sibility for people with specific
4. Thermal characteristics,
see 7.4.2.1
(see 7.2.2)
5. Characteristics of indoor air quality,
see 7.4.3.1
s to building services
2.3 6. Acoustic characteristics,
see 7.4.4
7. Characteristics of visual
daptability, see 7.3 comfort,
see 7.4.5.1
a
a
Is the aspect
b
c
b
Specify the minimum
Is there a nationalrelevant for
regional or
requirement according
the design aspect
the nationalIs the of European Is there aprevailing
the object of
requirement
regulation or if not
relevant applicable ?
regional or give details
assessment ? for
regulated
of any
(yes/no)
the design(yes/no) European requirements
of
made in the clients
If yes - giverequirement
the object of
brief
reference to the
assessment ? regulation)
relevant applicable ?
(yes/no)
(yes/no)
If yes - give
reference to the
relevant regulation)
d
e
f
c
Have measures
d
Give Reference to
Give value for indicator or
been taken for
briefly specify measures
relevant documentation to
exceeding the
taken to
the
support e)
Specify the minimum achieveHave measures
Give val
requirements
stated performance ?
requirement according
been taken for
briefly sp
given in c)
the prevailing
yes/no)
regulation or if not
regulated give details
of any requirements
made in the clients
brief
exceeding the
requirements
given in c)
yes/no)
taken to
stated p

33. Annex B - Table for Module B 1: checklist on the social indicators for the information module
"Use stage"
dule B1
Clause
Module B1
a
a Is the aspect
b
b
Is there a national-
c
d
c
Have measures
Specify the minimum
7.2 – 7.7
relevant for
regional or
requirement according
been taken for
the design
the
exceeding the
Is the aspect of Is Europeana national-prevailing
there
Specify the minimum
indicators for the aspect related to
the object of
requirement
regulation or if not
requirements
social performance as listed in Table 1
relevant assessment ? regional or
for
applicable ?
regulatedrequirement according
give details
given in c)
in clause 7.1
of any requirements
(yes/no)
(yes/no)
the design of
European
the prevailing
the indicators
spect related to1-16 are buildingmade in the clients
yes/no)
If yes - give
related aspects for the fabric
the
requirement
regulation or if not
brief
as listed in Table 1 user- andobject of
reference to the
 the indicators 17-21 are
assessment ?
applicable ?
regulated give details
relevant regulation)
control system-related aspects
relevant for the operation of the
of any requirements
(yes/no)
(yes/no)
7 are building
building-
or the fabric
Aspect Accessibility, see 7.2
1. user- and people with specific
for
22 are Accessibility7.2.2)
needs (see
lated aspects
2. Access to building services
peration of the
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
lity, see 7.2
Aspect Health and comfort, see 7.4
people with characteristics,
4. Thermal specific
see 7.4.2.1
2)
5. Characteristics of indoor air quality,
see 7.4.3.1
ng services
6. Acoustic characteristics,
see 7.4.4
7.
ty, seeCharacteristics of visual comfort,
7.3
see 7.4.5.1
If yes - give
reference to the
relevant regulation)
made in the clients
brief
e
d
Give value for indicator or
briefly specify measures
taken to achieve the
Have measures
stated performance ?
been taken for
exceeding the
requirements
given in c)
yes/no)
f
e
Give Reference to
relevant documentation to
supportGive value for
e)
ind
briefly specify me
taken to achieve
stated performan

34. 1
Annex B - Table for Module B 1: checklist on the social indicators for the information module
"Use stage"
Module B1
Clause
7.2 – 7.7
a
Is the related to
indicators for the aspectaspect
social performance as listed in Table 1
relevant for
in clause 7.1
the are building
ted to the indicators 1-16design of
related aspects for the fabric of
the object
in Table indicators 17-21 are user- and
1
 the
assessment ?
control system-related aspects
relevant for the operation of the
ding- building (yes/no)
ic Aspect Accessibility, see 7.2
1.
for people with specific
er- andAccessibility7.2.2)
needs (see
ects
2. Access to building services
f the see 7.2.3
.2
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
ith specific characteristics,
4. Thermal
es
3
see 7.4.2.1
5. Characteristics of indoor air quality,
see 7.4.3.1
6. Acoustic characteristics,
see 7.4.4
7. Characteristics of visual comfort,
see 7.4.5.1
a
b
b
Is the aspect
c
d
c
Specify the minimum
e
d
Give value for indicator or
f
e
Give Reference to
Is there a nationalHave measures
relevant for
regional or
requirement according
been taken for
briefly specify measures
relevant documentation to
the design a
European
the prevailing
exceeding the
taken to achieve the Give support e)
Is thereof national- Specify the minimum
Have measures
value for indicator or
the object of
requirement
regulation or if not
requirements
stated performance ?
regional ? applicable ? requirement according in c)
been taken for
briefly specify measures
assessment or
regulated give details
given
(yes/no)
European (yes/no)
the of any requirements
prevailing
exceeding the
taken to achieve the
made in the clients
yes/no)
If yes - give
requirement
regulation or if not
requirements
stated performance ?
brief
reference to the
applicable ?relevant regulation)
regulated give details
given in c)
(yes/no)
If yes - give
reference to the
relevant regulation)
of any requirements
made in the clients
brief
yes/no)

35. 1
c
Annex B - Table for Module B 1: checklist on the social indicators for the information module
"Use stage"
Clause
7.2 – 7.7
a
Module B1
a
b the aspect
Is
relevant for
Is the aspect related to
nationalindicators for the aspect Is there a the design of
the object of
social performance as listed in Table 1
relevant for
regional or
assessment ?
in clause 7.1
the design 1-16 are buildingEuropean (yes/no)
 the indicators of
related aspects for
the object of the fabric
requirement
 the indicators 17-21 are user- and
assessment ? aspects
applicable ?
control system-related
relevant for
of the
(yes/no) the operation(yes/no)
building
Aspect Accessibility, seeIf yes - give
7.2
reference to the
1. Accessibility for people with specific
needs (see 7.2.2)
relevant regulation)
2. Access to building services
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1
5. Characteristics of indoor air quality,
see 7.4.3.1
6. Acoustic characteristics,
see 7.4.4
7. Characteristics of visual comfort,
see 7.4.5.1
b
c
Is there a national-
c
d
d
Have measures
Specify the minimum
regional or
requirement according
been taken for
European
the prevailing
exceeding the
Specify the minimum
Have measures
requirement
regulation or if not
requirements
requirement according details given in c) for
been taken
applicable ?
regulated give
(yes/no)
the prevailingof any requirements exceeding the
made in the clients
yes/no)
If regulation or if not
yes - give
requirements
brief
reference to the
regulated give details
given in c)
relevant regulation)
of any requirements
made in the clients
brief
yes/no)
e
f
e Give Reference to
Give value for indicator or
briefly specify measures
relevant documentation to
taken to achieve the
Give value for support e) or
indicator
Give
stated performance ?
briefly specify measures
taken to achieve the
stated performance ?
R
relevan
suppor

36. a
Annex B - Table for Module B 1: checklist on the social indicators for the information module
"Use stage"
Module B1
Clause
7.2 – 7.7
b
spect
Is the aspect nationalindicators forthere a related to
social performance as listed in Table 1
t for in clauseregional or
7.1
ign of the indicators 1-16 are buildingEuropean

aspects for the fabric
ect of related requirement
 the indicators 17-21 are user- and
ment ?
applicable ?
control system-related aspects
)
relevant for the operation of the
(yes/no)
building
If yes - give
Aspect Accessibility, see 7.2
reference to the
1. Accessibility for people with specific
needs (see 7.2.2) regulation)
relevant
2. Access to building services
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1
5. Characteristics of indoor air quality,
see 7.4.3.1
6. Acoustic characteristics,
see 7.4.4
7. Characteristics of visual comfort,
see 7.4.5.1
a
b
c
Is there a national-
Is the aspect
relevant for
regional or
the design of the minimum
Specify European
the object of
requirement
requirement according
assessment ?
applicable ?
(yes/no)
(yes/no)
the prevailing
regulation If yes - not
or if give
reference to the
regulated give details
relevant regulation)
of any requirements
made in the clients
brief
c
d
Specify the minimum
d
e
e
Give value for indicator or
f
f
Have measures
Give Reference to
requirement according
been taken for
briefly specify measures
relevant documentation to
the prevailing
exceeding the
taken for indicator or support e) Reference to
Have measures
Give value to achieve the
Give
regulation or if not
requirements
stated performance ?
been taken
relevant document
regulated give detailsfor given in c) briefly specify measures
of exceeding the
any requirements
taken to achieve the
support e)
made in the clients
yes/no)
requirements
stated performance ?
brief
given in c)
yes/no)

37. Annex B - Table for Module B 1: checklist on the social indicators for the information module
"Use stage"
b
Module B1
Clause
7.2 – 7.7
c
a
Is the aspect
relevant for
the design
re a national- the aspect related to minimum of
Specify the
indicators for
the object
social performance as listed in Table 1
nal orin clause 7.1
requirement accordingof ?
assessment
ean  the indicators 1-16 areprevailing (yes/no)
the buildingementrelated aspects for the fabric or if not
regulation
 the indicators 17-21 are user- and
able ?control system-related aspects give details
regulated
of any requirements
relevant for the operation of the
no)
building
made in the clients
- give
Aspect Accessibility, see 7.2
brief
nce to the
1. Accessibility for people with specific
needs (see
ant regulation) 7.2.2)
2. Access to building services
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1
5. Characteristics of indoor air quality,
see 7.4.3.1
6. Acoustic characteristics,
see 7.4.4
7. Characteristics of visual comfort,
see 7.4.5.1
b
d
c
e
d
e
f
f
Is there a national- Specify the minimum
Have measures
Give value for indicator or
Give Reference to
regional or
requirement according
been taken for
briefly specify measures
relevant documentation to
European
the
exceeding the
support
Have measures prevailing
Give value for indicator taken to achieve the
or
Give Reference to e)
requirement
regulation or if not
requirements
stated performance ?
been taken for regulated give details specify measures
briefly given in c)
relevant documentation to
applicable ?
exceeding the of any requirements to achieve the
taken
support e)
(yes/no)
made in the clients
yes/no)
If yes - give
requirements brief
stated performance ?
reference to the
given in c)
relevant regulation)
yes/no)

38. Clause
Is the aspect
Is there a national- Specify th
7.2 – B 1: checklist on the social indicators for the information modulerequireme
7.7
relevant for
regional or
Annex B - Table for Module
the design of
European
the prevai
"Use stage"
indicators for the aspect related to
the object of
regulation
asocial performance as listed in Table 1
b
c
d
erequirement
f
Module B1
assessment value forapplicableGive Reference to regulated
?
?
in clause 7.1national- Specify the minimum Have measures
Clause
Is the aspect
Is there a
Give
indicator or
7.2 – 7.7
of any
relevant for
regional or
requirement according
been taken for
specify measures
(yes/no) brieflyto achieve the
(yes/no) relevant documentation to req
Aspect Accessibility, see 7.2
 of European
are buildingthe design the indicators 1-17the prevailing
exceeding the
taken
support e)
indicators for the aspect related to
made in th
requirement
or if
stated performance ?
1. social performance people with specific the object of
Accessibility for as listed in Table 1
If yes - give
related aspects forregulation give details requirements
the fabricnot
assessment ?
applicable ?
regulated
given in c)
brief
in clause(see 7.2.2)
needs 7.1
of
reference to the
(yes/no) the indicators 18-22 any requirements
(yes/no)
are the clientsand yes/no)
user the indicators 1-16 are buildingmade in
2. Accessaspects for the fabric
If yes - give
relevant regulation)
related to building services
brief
control system-related aspects
see 7.2.3
 the indicators 17-21 are user- and
control system-related aspects
Aspect Adaptability, see 7.3
relevant for the operation of the
building
3. Adaptability
reference to the
relevant regulation)
relevant for the operation of the
building
Aspect Accessibility, see 7.2
Aspect Health and comfort, see 7.4
Aspect Accessibility, see 7.2
1. Accessibility for people with specific
4. Thermal(see 7.2.2)
characteristics,
needs
INDOOR AIR QUALITY
1. Accessibility for people with specific
needs (see 7.2.2)
see 7.4.2.1
2. Access to building services
5. Characteristics of indoor air quality,
see 7.2.3
see 7.4.3.1
Aspect Adaptability, see 7.3
6. Acoustic characteristics,
3. Adaptability
see 7.4.4
Aspect Health and comfort, see 7.4
7. Characteristics of visual comfort,
4. Thermal characteristics,
see 7.4.5.1
see 7.4.2.1
8. Spatial characteristics,
5. Characteristics of indoor air quality,
see 7.4.6
see 7.4.3.1
Impacts on neighbourhood, see 7.5
6. Acoustic characteristics,
see 7.4.4
9. Noise,
see 7.5.2
7. Characteristics of visual comfort,
see 7.4.5.1
10. Emissions,
2. Access to building services
see 7.2.3
Aspect Adaptability, see 7.3
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1

39. 7.4.3.1. Building fabric-related characteristics of indoor air quality
The building fabric-aspect of indoor air quality depends on a wide range of factors:
e.g. .............. The indoor air quality can also depend on the presence of other products (furniture,
fixtures and fittings, floor coverings etc.) that are not building-related.
For the assessment of indoor air quality the following indicators shall be assessed:
•
Substances and particles which are regulated and/or stated in the clients brief. Additional
substances and particles can be assessed where appropriate.
•
Concentration of Carbon Dioxide (CO2) above the external ambient CO2 concentration [ppm]
according to EN 15251;
•
Ventilation rate in accordance to EN 15251 [e.g. l/s/person or l/s/m 3];
•
Risk of mould growth based on internal surface temperature and relative humidity according to
EN-ISO 13788;

40. Clause
Is the aspect
Is there a national- Specify th
7.2 – B 1: checklist on the social indicators for the information modulerequireme
7.7
relevant for
regional or
Annex B - Table for Module
10. Emissions,
the design of
European
the prevai
"Use stage"
indicators for the aspect related to
see 7.5.3
the object of
regulation
asocial performance as listed in Table 1
b
c
d
erequirement
f
Module
11. Glare/overshadowing, B1
assessment value forapplicableGive Reference to regulated
?
?
see 7.5.4
in clause 7.1national- Specify the minimum Have measures
Clause
Is the aspect
Is there a
Give
indicator or
7.2 – 7.7
of any
relevant for
regional or
requirement according
been taken for
specify measures
(yes/no) brieflyto achieve the
(yes/no) relevant documentation to req
12. shocks / vibrations,
 of European
are buildingthe design the indicators 1-17the prevailing
exceeding the
taken
support e)
indicators for the aspect related to
made in th
see 7.5.5
the object of
requirement
or if
stated performance ?
social performance as listed in Table 1
If yes - give
related aspects forregulation give details requirements
the fabricnot
assessment ?
applicable ?
regulated
given in c)
brief
in clause 7.1
Aspect Safety and security, see 7.7
of
reference to the
(yes/no) the indicators 18-22 any requirements
(yes/no)
are the clientsand yes/no)
user the indicators 1-16 are buildingmade in
13. Resistance to climatefabric
If yes - give
relevant regulation)
related aspects for the change, see
brief
control system-related aspects
9. Noise,
see 7.5.2
 7.7.2
the indicators 17-21 are user- and
control system-related aspects
14. Accidental actions (earthquake,
relevant for the operation of the
explosions, fire and traffic impacts),
building
reference to the
relevant regulation)
relevant for the operation of the
building
see 7.7.3
Aspect Accessibility, see 7.2
15. Personal safety and security
1. Accessibility for people with specific
against intruders and vandalism,
needs (see
see 7.7.4 7.2.2)
2. Access to building services
16. Security against interruptions of
see 7.2.3
utility supply, see 7.7.5
Aspect Accessibility, see 7.2
1. Accessibility for people with specific
needs (see 7.2.2)
INDOOR AIR QUALITY
Aspect Health and comfort, see 7.4
3. Adaptability
2. Access to building services
see 7.2.3
17. Thermal comfort, comfort, see 7.4
Aspect Health and
see 7.4.2.2
Aspect Adaptability, see 7.3
Aspect Adaptability, see 7.3
4. Thermal characteristics,
see 7.4.2.1
18. Indoor air quality,
see 7.4.3.2
5. Characteristics of indoor air quality,
see comfort,
19. Visual7.4.3.1
see 7.4.5.2
6. Acoustic characteristics,
see 7.4.4
Impacts on neighbourhood, see 7.5
7. Characteristics of visual comfort,
20. Emissions,
see 7.4.5.1
see 7.5.3.1
3. Adaptability
Aspect Health and comfort, see 7.4
4. Thermal characteristics,
see 7.4.2.1

41. 7.4.3.2 User and control system-related aspects of indoor air quality
The level of controllability of the indoor air quality per room and of the building shall be
assessed according to the following measures:
•
Is there control of ventilation at a building level? [yes/no];
•
Is there control of ventilation by users with automatic control and/or with manual
override by users? [yes/no].
•
Is there measurement and display of CO2-level in individual rooms ? [yes/no];
•
Is there measurement and display of humidity in the building
and/or individual rooms ? [yes/no];
For each of the above indicators the selected basis of design shall be briefly stated
together with reference to supporting documents.

42. Thank you !
Chris Hamans
esc@hamans.com
http://www.hamans.com
42