1. Trane Chiller Teardown

2. REFRIGERANT HCFC-123 RECOVERED TO 25 mm ABSOLUTE

3. EXTERNAL LINKAGE CAN BE REMOVED WHILE RECOVERING REFRIGERANT

4. SETUP TO DRILL AND REAM FOR TAPER DOWEL PINS REQUIRED FOR PRECISE REASSEMBLY MATCH MARK ALL MATING PARTS BEFORE DISASSEMBLY

5. TAPER DOWEL PIN IN PLACE

6. INSULATION REMOVED FLANGE DRILLED FOR DOWEL PINS THRUST BEARING END

7. NEED ORGANIZED STORAGE FOR ALL COMPONENTS REMOVED FROM MACHINE FOR ORDERLY REASSEMBLY

8. PULL STRAPS AGAINST VERTICAL LEG OF ELBOW FOR BALANCE

9. CENTER LIFTING STRAPS ON TOP-CENTER OF ELBOW

10. PUT ELBOW ON CART, SUPPORT SECURELY, COVER TO PROECT, AND PLACE ASIDE IN A SAFE AREA

11. FIRST STAGE VANE ASSEMBLY WITH VANES IN OPEN POSITION

12. FIRST STAGE INLET GUIDE VANE LIFTING BRACKET LIP ON END OF BRACKET TO CATCH INSIDE OF GUIDE VANE HOUSING

13. DOUBLE WIDE UNISTRUT WITH”BARNDOOR” STYLE TROLLEY TO REMOVE “LIGHTER” COMPONENTS

14. Lifting Bracket inserted in First Stage Inlet Guide Vane Assembly