This product is a Current Sense Resistors of the type Electron Beam Welded.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/heb/
Call Girls in Thane 9892124323, Vashi cAll girls Serivces Juhu Escorts, powai...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HEB (English)
1. • Open frame electron beam
welded punched out type.
• 36W.
• R0001 to R000250.
LOW OHM BATTERY
SHUNT RESISTORS
HEB
SERIES
e : info@htr-india.com
www.htr-india.com
2. Sr No. HI-TECH PART NAME RESISTIVE MATERIAL A (mm) B (mm)
1 HEB36W* R0001 J MANGNIN 9.40 ± 0.20 12.60 ± 0.127
2 HEB36W* R000125 J MANGNIN 12.20 ± 0.20 15.40 ± 0.127
3 HEB36W* R000250 J MANGNIN 22.90 ± 0.20 26.05 ± 0.127
PHYSICAL CONFIGURATION
DIMENSIONAL TABLE
LOW OHM
BATTERY
SHUNT
RESISTORS
HEB
ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS
MECHANICAL SPECIFICATIONS
Power Rating (Rated Ambient Temperature ) Full power dissipation at 70° C and linearly
derated to zero at + 170 ° C
Insulation Not Insulated
Resistance Tolerance ±5% (Available upto ±1%)
Temperature Range - 65° C to +170° C
Voltage Rating / Limiting Voltage / Max. Working Voltage P x R
Short time Overload (5 x Rated Power for 5 Secs.) ∆R ± [ 1.25 % + R0005 ]
Resistance Temperature Characteristics <225 ppm/°K
Damp Heat (Steady State ) ∆R ± [ 0.5 % + R0005 ] – Average
(40°C at 93 % R.H. for 1000 Hrs. – no load applied )
Endurance – Load Life [ 70°c with limiting voltage ∆R ± [ ≤2.75 % + R0005 ] – Average
– 1.5 hours on / 0.5 hours off for 1000 hours ]
Resistance to Soldering heat - (350° for 30 Secs) ∆ R ± [ 0.2 % + R0005 ] – Typical
Solderabillity ( As per IEC pub. 60068-2-20 ) Must meet the requirements laid down
PARAMETER / PERFORMANCE TEST TEST METHOD PERFORMANCE REQUIREMENTS
PARAMETER / PERFORMANCE TEST TEST METHOD PERFORMANCE REQUIREMENTS
e : info@htr-india.com
www.htr-india.com
TECHNICAL INFORMATION
1) Ideal for Current sense and High Current application.
2) Sulfer free copper connection.
PRINTING / MARKING
Eg. For HEB36W* R0001 ± 5% Marking will be HTR 0.1 DATECODE
PACKAGING
Resistors shall be packed in sealed plastic packets placed in small cardboard cartons
(Type‘A’Box ) of approximate size 200mmx150mmx70mm - 200pcs. such 2 Boxes packed in Master Carton
of approximate size 310mmx205mmx95mm.
2.2
18.00
CHAMPER 2x45˚ (TYP)
9.00
Ø7.00
3.0
85.00
60.00
6.30
Cu
VOLTAGE TEST POINTCALIBRATION NOTCH -2mm (Ref)
Cu
A
B
Ø7.0
Length tolerance iso 2768
Nominal size range allowance
0.5 to 3 ±0.1
ABOUT 3 TO 6 ±0.1
6 TO 30 ±0.2
30 TO 120 ±0.3
120 TO 400 ±0.5
400 TO 1000 ±0.8
1000 TO 2000 ±1.2
FOR NOMINAL SIZES
0.5 : SPECIFY ALLOWANCE