5. Why Stress on Labour Productivity? Total Factor Productivity = Production at standard Price Labour + Materials + Overhead+k (Capital Invested) Where k is a fraction taking value below 1 Assumption : Level of input same during both the years. Output for a tyre mfg. company Output 2004-05 2005-06 (i) Number of Tyres Produced 16,000 20,000 (ii) Life of a Tyre in KM 20,000 15,000 (iii) Price of a Tyre 2,000 1,600
6. Productivity Measurement (a) Number of Tyres = X 20,000 – 16,000 16,000 100=25% (b) Tyre KM = 320 million 300 million 20 320 = X 100 = 6% (c) Monetary Terms = 32 million 32 million = No change
7. Improvement in Labour Productivity (In Earlier Days (1) Work Study Method Study Work Measurement (Time Study) – ‘Norms’ (2) Job Evaluation (3) Job Re-Design -Job Enlargement / Enrichment (Multi – skilling) (4) Rewards & Penalities (5) Financial Incentives Schemes
8.
9.
10.
11.
12.
13. MANAGEMENT DECISIONS Relative Frequency of decisions at different levels of Mgt. Strategic Decisions (Top Level) Tactical Decisions (Middle Level) Operational Decision (Bottom Level)
14. SYSTEMS ASPECT OF OPERATIONS/PRODUCTION FUNCTION INPUT Operations Mgt. OUTPUT Materials Transformation (Conversion) Process Goods or Services Labour Equipment Capital Feed Back Information Environment Internal (Top Mgt.) External (Legal, Political, Social, Economic)
15.
16.
17.
18.
19.
20. BELOW ARE SOME OF INPUT-TRANSFORMATION – OUTPUT RELATIONSHIPS System Primary Inputs Resources Transformation Function Desired Output Hospital Patients Doctors, Nurses, Medicines, etc. Healthcare (Physiological) Healthy Individuals Automobile Factory Sheet Metal, Engine Parts Tools, Workers, Equipments Fabrication and Assembly of Cars High Quality of Cars College or University 10+2 or Graduates Teachers, Books, Class Rooms Imparting Knowledge Educated Individuals
21. CHARACTERISTICS OF SYSTEMS TO PRODUCE PRODUCTS VS. SERVICES Products Services 1. Tangible 1. Intangible & Perishable (Consumed in the process of their production) 2. Can be produced to inventory for “off the shelf” availability 2. Availability achieved by keeping production system open for services 3. Minimal contact with ultimate consumer 3. High contact with clients or customers 4. Complex & inter-related processing 4. Simple processing
22. Products Services 5. Demand on system variable on weekly, monthly & seasonal basis 5. Demand commonly variable on hourly, daily & weekly basis 6. Markets served by production system are regional, national & international 6. Markets served by production system are usually local 7. Large units that can take advantage of economies of scale 7. Relatively small units to serve local markets 8. Location of the system is in relation to regional, national & international markets 8. Location dependent on location of local customers, clients and users.
23.
24.
25.
26. PROBLEMS OF PRODUCTIOIN & HOW ARE THESE TACKLED IN PRODUCTION MANAGEMENT Long Run Decisions Short Run Decisions 1. Selection of the product 1. Inventory control 2. Design of the product 2. Production control 3. Selection of equipment & processes 3. Maintenance & reliability of systems 4. Production design of items processed 4. Quality control 5. Job Design 5. Labour control 6. Site of industry & business 6. Cost control & improvement 7. Facility layout
27.
28. CURRENT ISSUES/CHALLENGES FACING OPERATIONS MANGEMENT (PRODUCTION MANAGEMENT) 1. Global Market Place Globalisation has resulted in steep increase in the level of competition among manufacturing firms throughout the world 2. Production/Operations Strategy Production/Operations Strategy becoming important for overall success of business and relating it to overall business strategy. 3. Total Quality Management (TQM) TQM adopted to achieve customer satisfaction and never ending quest for improving quality of goods & services. 4. Flexibility Adapt quickly to changes in demand or product mix or delivery schedules is a major competitive strategy and a competitive advantage to the firms. Also known as agile manufacturing.
29. 5. Time Reduction Reduction in manufacturing time and speed to market a new product gives a competitive edge, price & quality remaining same. 6. Technology Integration of advanced technology in products and processes can have great impact on competitiveness & quality. Adoption of automation, computerization information & communication technology is a must for facing competition. 7. Workers Involvement Employee involvement & empowerment (quality circles, use of work teams or quality improvement teams) assigns responsibility & problem solving to lower levels in the organization. 8. Re - Engineering Involves concept of clean-slate approach or starting from scratch in re-designing the business processes.
30. 9. Environmental Issues Pollution control & waste disposal are key issues for protection of environment & social responsibility. There is increasing emphasis on reducing waste, recycling waste, using less toxic chemicals and using bi-degradable materials for packaging. 10. Corporate Down-Sizing (or Right-Sizing) Down-sizing or right-sizing has become necessary due to competition, productivity improvements, need for profit and higher dividend payment to share-holders. 11. Supply-Chain Management Management of supply - chain from suppliers to final customers reduces cost of transportation, ware-housing & distribution throughout the supply chain. 12. Lean Production Production systems use minimal amount of resources to produce high volume of high quality goods with some variety. These systems use flexible manufacturing systems and multi-skilled workforce to have advantages of mass-production & job production (or craft production).
31. Process Flow Structures (Types OF Production Systems) A process flow structure refers to how a factory organizes material flow using one or more of the process technologies.
32.
33. And automatic assembly of components on a printed circuit board when other processes are employed in a line fashion along with assembly, it is commonly referred to as a production line. Continuous Flow Conversion or further processing of undifferentiated materials such as petroleum, chemicals, beer, etc. as on assembly line, production follows a predetermined sequence of steps, but the flow is continuous rather than discrete. Such structures are usually highly automated and, in effect constitute one integrated machine that must be operated 24 hours a day to avoid expensive shut-downs & start-ups. The choice of which flow to select, with the exception of continuous flow structures, is generally a function of the volume requirements for each product.
34.
35. (A) Manufacturing (5 p’s of production) - Plant : Addition & location of new plants, relocation - People : Setting/Revising work standards - Parts : Make or buy decisions, vendor selection - Processes : Technology evaluation / process improvement, Re-Engineering - Planning & Control Systems : Supply Chain Management, MRP, Shop floor control, warehousing, distribution In practice, all the above aspects (5p’s) are inter-related to some extent, manufacturing consulting specializes in process industries, assembly or product manufacture.
41. Aspects in Product Design 1. Design for Function (a) Meet customer’s expectations (b) Strength & durability of products & its components 2. Design for making / Manufacturing (a) Materials, fastening devices (b) Proper specifications (c) Using standard parts (d) Operational convenience of machines 3. Design for Selling (a) Appearance (b) Convenience meeting customers needs
42. Product Design (a) New Products (b) Modifications for existing products New Product Development Concepts 1. External Appearance 2. Internal Components (performance, reliability, durability giving long term satisfaction) 3. New product screening (evaluate potential) 4. Business Analysis (estimate economic feasibility) 5. Product Development (cost estimates for manufacturing, packaging, distribution) 6. Testing Stage (potential market acceptance market research) 7. Commercialization (introduction into market place)
43. PRODUCT DESIGN Human factors engineering or ergonomics Endeavour to apply relevant information about human characteristics and behaviour to the design of things people use, the methods by which they are used and the environment in which people work and live. In addition to the psychological aspects involved in designing equipments in industries / end user products, physical effects of working nature on the human beings (worker/any person using end products) should be considered while designing either equipment or end user terms like cars, two wheelers etc. Some of these effects are taken into account in the designing of equipments that workers use.
44.
45.
46.
47. The value analysis team is a cross-functional team. If the objective of value analysis is enhancement of the market value, then the value analysis team leader will be the head of the marketing department. If the objective of value analysis is to reduce the cost or the product innovation, then the value analysis team leader will be the head of the manufacturing. Cost of value The value is of two types, namely the use value and the esteem value. Use value: The product quality is fundamentally defined as fitness for use. Value analysis is primarily concerned with the ‘use value’. This is also known as the primary or the basic value of the product. Esteem value The esteem value is the enhanced value associated with a brand or a product created by smart marketers. This is a notional or snob value for which the customer is ready to pay higher. This is also known as the secondary value associated with the product.
48.
49.
50.
51.
52.
53.
54. DFMA (Designing Products for Manufacture & Assembly) In the Traditional system, the designer was designing the product without consulting / involving the manufacturing engineers resulting in problems in manufacturing & assembly requiring design changes. Often, these design changes were major resulting in considerable additional expense & delays. To overcome these problems, is to consult manufacturing engineers during the design stage. These concurrent engineering teams require analysis tools to help them study proposed designs & evaluate them from the point of view of manufacturing difficulty & cost. The greatest improvements related to DFMA arise from simplification of the product by reducing the number of separate parts – the guidance to the designer provides following three criteria against which each part must be examined as it is added to the product during assembly.
55.
56.
57. Quality Function Deployment (QFD) QFD is the approach to getting the voice of the customer into the design specifications of a product. This approach which uses inter-functional teams from marketing, design engineering and manufacturing helps in regarding costs & significantly shortening design times. QFD process begins with studying & listening to customers to determine characteristics of a superior product through market research. Consumer’s product needs & preferences are defined & broken down into categories called customer requirements . These requirements are weighted based on their relative importance to the customer. Next, the consumer is asked to compare & rate the company’s products with the products of competitors. This process helps the company determine the product characteristics that are important to the consumer & to evaluate its product in relation to others.
58. The end result is a better understanding and focus on product characteristics that require improvement. Customer requirement information forms, the basis for a matrix called the house of quality . By building a house-of-quality matrix, the cross-functional QFD team can use customer feed-back to make engineering, marketing & design decisions & focus on product that satisfies customers.
59. Process Flow Design Process flow design focuses on the specific processes that raw materials, parts & sub-assemblies follow as they move through the plant. The most common production management tools used in planning the process flow are assembly drawings, assembly charts, route sheets & flow process charts. These charts can be used to improve productive system. These charts are the “Organization Charts” of manufacturing system. Assembly Drawing : It is an exploded view of the product showing its component parts. Assembly Chart uses the information presented in the assembly drawing & defines how parts go together, their order of assembly and the overall material flow pattern.
60.
61. Task : Each task in a process accomplishes, to a certain degree, the transformation of input into the desired output. Flow : The flow in a process consists of flow of material as well as flow of information. The flow of material involves the transfer of a product from one task to its next task. The flow of information helps in determining how much of the transformation has been done in the previous task and what exactly remains to be completed in the present task. Storage : When neither a task is being performed nor a part is being transferred, the part has to be stored. Goods in storage, waiting to be processed by the next task, are often called work-in-process inventory
63. Product Design & Process Selection – Services The Nature of Services Seven Generalizations about services (i) Everyone is an expert on services (ii) Services are idiosyncratic – what works well in providing one kind of service may prove disastrous in another. (iii) Quality of work is not quality of service. (iv) Most services contain a mix of tangible & intangible attributes that constitute A Service Package. This package requires different approaches to design & management than the production of goods. (v) High-contact services are experienced whereas goods are consumed. vi) Effective management of services requires an understanding of marketing & personnel as well as operations. vii) Services often take the form of cycle of encounters involving face to face, phone, mail interactions, etc.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73. The left side is logical marketing proposition i.e. the greater the amount of contact, greater the sales opportunity. The right side shows the impact on production efficiency as the customer exerts more influence on the operation. The entries within the matrix list the ways in which service can be delivered, production efficiency decreases as the customer has more contact. To offset this, face to face contact provides high sales opportunity to sell additional products, conversely low contact such as mail allows system to work efficiently but little sales opportunity.
74.
75.
76. The systematic substitution of equipment for people & planned use of technology resulted in rapid delivery of uniform, high quality mix of prepared foods in a clean environment. There has been extensive use of what are called Poka-Yokes in total design & facilities planning. The only choice available to the attendant is to operate as the designers intended. This is categorized as face-to-face tight specification service.
77. The Self-Service Approach The service process is enhanced by having the customer take a role in the production of the service. Automatic Teller Machines, Self-Service Gas stations, in-room coffee making equipment, etc are examples that shift the service burden to the consumer. This is the use of on-site technology many customers like self-service because it puts them in control. It turns customers into “Partial Employees” who must be trained what to do and are “Fail-Safed” in case of mistake. It is often most profitable to provide both full service & self-service at the same facility. With the reduced prices of self-service Gaseline, the sales increased as well as profitability of dealers.
78. The Personal Attention Approach An interesting contrast in the way personal attention is provided can be seen in Nordstrom Deptt. Stores & Ritz-Carlton Hotel Co. At Nordstrom, rather loose, unstructured process relies on developing relationship between the individual sales person & the Customer (This is Face-to Face with total customization service). At Ritz-Carlton, the process is systemised in such a way that information system rather
79. Than the employees keep track of guest’s personal preferences. This is Face to Face loose specification example. Nordstrom, the speciality clothing retailer has sales five times per Sq. Foot compared to a Typical Deptt. Store. Sales person religiously carry a “Personal Book” where they record voluminous information about each of their customers, Sales person can send cards, flowers & can even assist customers to any Deptt. Store for shopping to build personal report with each customer.
104. (B) Differences Level of change Radical Incremental Starting point Clean slate Existing process Participation Top-down Bottom-up Typical scope Broad. Cross functional Narrow: with in functions Risk High Mode rate Primary enabler Information technology Statistical control Type of change Cultural & Structural Cultural
105. Definition of Total Quality Management (TQM) Total Quality Management (TQM) is an enhancement to the traditional way of doing business. It is a proven technique to guarantee survival in world-class competition. Total – Made up of the whole. Quality – Degree of excellence a product or service provides. Management – Act, art, or manner of handling, controlling, directing etc.
106.
107.
108. The Dimensions of Quality Dimension Meaning and Example Performance Primary product characteristics, such as the brightness of the picture Features Secondary characteristics, added features, such as remote control Conformance Meeting specifications or industry standards, workmanship Reliability Consistency of performance over time, average time for the unit to fail Durability Useful life, includes repair Service Resolution of problems and complaints, ease of repair Response Human-to-human interface, such as the courtesy of the dealer Aesthetics sensory characteristics, such as exterior finish Reputation Past performance and other intangibles, such as being ranked first
109. ISO – 9000 SERIES ISO 9000 is a series of standards agreed upon by the international organization for standardization (ISO) and adopted in 1987. More than 100 countries now recognize the 9000 series for quality standards and certification for international trade. In Europe & European common market (ECM) alone, more than 50,000 companies have certified as complying with these standards. All companies having international trade will have to adopt these standards eventually. THE ISO 9000 SERIES ISO 9000 consists of five primary parts numbered as 9000 through 9004
110. ISO 9002 Design Development Procurement Production Installation Servicing ISO 9001 ISO 9003
111. QUALITY SYSTEM – ISO Guide line for Use: 9000 : Quality management & quality assurance standards- guidelines for selection & use. 9004 : Quality management & quality system elements – guidelines Quality system 9001 : Model for quality assurance in design, production, installation & servicing. 9002 : Model for quality assurance in production & installation. 9003 : Model for quality assurance in final inspection test. ISO certification can take from 3 to 6 months to as long as two years if top management is not fully committed. Certification involves getting the proper documents, initiating the required procedures & practices and conducting internal audits.
112. There are three forms of certification. First Party : A firm audits itself against ISO 9000 standards Second Party : A customer audits its supplier Third Party : A “Qualified” national or international standards or certifying Agency serves as auditor The best certification is by a third party and once passed, the firm can be registered & recorded as having achieved ISO 9000 status. ISO specifies the way the firm operates as well as its quality standards, delivery times, service levels & so on. If a manufacturer wants to purchase, he can either visit / audit the supplier but it is always easier, cheaper, quicker & legally safer to select certified supplier
113. Benefits from ISO-9000 ISO 9000 certification has become the de-facto minimum requirement for those wishing to compete globally All actions in preparing for ISO certification & in maintaining the certification would result in streamlining of quality management system which may lead to improvements in product quality. It can also lead to significant cost reductions through reduction in rework, warranty work, repair, scrap, etc ISO 9000 lays stress on customer orientation. This would result in better overall results for the company in addition to improving customer relations. There may be an impetus to improve employee relations, employee empowerment and
114.
115.
116.
117. CONCEPT OF KAIZEN Imai has brought together various management theories, philosophies and tools that have been popular in Japan over the years, as a single concept, Kaizen . There are many quality experts, whose principles formed the basis of the Kaizen concept. Kaizen means continuous improvement involving everybody. The philosophy advocates on-going improvement, not only in one’s working life, but also in personal life, home life and social life. The term Kaizen originates from the Japanese words, ‘Kai’ that means change, whereas, ‘zen’ means for the better, therefore, it means ‘change for the better’. It signifies constant and gradual improvement, no matter how small it is. It should be taking place all the time in every process, involving everyone from all the ranks of management and the workforce. In brief, the system includes :
118.
119. TPM=Total Preventive Maintenance KAIZEN Kanban Quality improvement Just in time Zero-Defect Small Group Activities Cooperative Labour - Management Relation Productivity Improvement Customer orientation TQM Robotics Quality Circles Suggestion schemes - T PM ISO: 9000 Standards
120.
121. Cost of Conformance (COC) Cost of conformance (COC) is the cost which an organization incurs in meeting the requirements of its customers. A strong element of this cost is the money that a company spends on the product for preventing it form going wrong or checking the product right before it reaches the customer. Cost of Non-conformance (CONC) The cost of non-conformance (CONC) to customer requirements are the failure costs. These costs are incurred by a company in repairing what has gone wrong during manufacturing. Basic Operational costs (BOC) The basic operational costs (BOC) are those costs which an organization cannot avoid encountering during the normal performance of its business.
122. Benefits of Reducing the Cost of Quality If all the three categories of costs are systematically reduced, several benefits can accrue to the company. Heightened Efficiency Improved Customer Satisfaction Lower Operating Cost Cost of Non-Conformance (CONC) Cost of Conformance (COC) Cost of Qualify (COQ) Cost of Quality Reduced Basic Operating Cost (BOC)
123.
124.
125.
126. The rule of thumb says that for every rupee spent in prevention, we can save ten rupees in failure & appraisal costs. Often, increases in productivity occur as a by – product of efforts to reduce the cost of quality. BENCH MARKING “ If you know your enemy and know yourself, you need not fear the result of a hundred battles.” According to Kehoe (1996) benchmarking can be defined as “measuring the performance of processes within your organization, comparing these performance levels with the best in class companies and where deficiencies exist, using the information on the best practices to improve your organisation’s own business processes.”
127.
128.
129.
130.
131.
132. Continuous Improvement (CI) Continuous improvement (CI) is a management philosophy that approaches the challenge of product and process improvement as a never-ending process of achieving small wins. It is an integral part of a total quality management system. Continuous improvement seeks continual improvement of machinery, materials, labor utilization, and production methods through application of suggestions and ideas of team members. Though pioneered by U.S. firms, this philosophy has become the cornerstone of the Japanese approach to operations. Although management in both Japan and the West historically have implemented CI in manufacturing plants, it has become quite common in services as well.
133.
134.
135. Deming wheel (PDCA cycle) Another Tool is PDCA cycle: P= Plan D=Do C=Check A=Act It is often called Deming wheel
136. Deming Wheel Pareto diagrams Scatter diagrams Runcharts Control charts Implement recommendations Define process & problems Group & Value Collect Data 2. Do 3.Check 4.Act 1. Plan Flow Chart Cause & effect Define Problem Suggest possible causes
137.
138.
139.
140.
141.
142.
143.
144.
145.
146.
147.
148.
149. PHILOSOPHIES OF QUALITY GURUS The customers of today are very different compared to yester years. Today the customer is demanding quality in product, in services, in life, in everything. Only those companies that upgrade to global standards will survive. There are many theories propagated by quality experts. Deming’s approach to TQM Deming is among the pioneers of the TQM concept. His views on improving quality contains fourteen points approach as given below:
150.
151.
152.
153.
154.
155.
156. QUALITY AWARDS A number of awards are given to individuals, groups and Companies world over in order to encourage and motivate them to continue their efforts for quality improvement. Some of these national, state, and industry specific awards are listed below:-
157.
158. Limited to a maximum of six winners per year, the major national quality awards recognize only the best of the best. Countless other excellent companies would go unrecognized. It should be noted that, although the Baldrige criteria has emerged as the definitive quality standard, the Deming Overseas Prize is the only true international quality competition.
159.
160.
161.
162.
163.
164. Enablers: Leadership – 10% People management – 9% Policy and strategy-8% Resources- 9% Processors- 14% Enablers (total)- 50% Results People satisfaction – 9% Customer satisfaction-20% Business result – 15% Impact on society- 6% Results (Total) – 50%
165. Golden Peacock National Quality Award (Gpnqa) The golden peacock national quality award (gpnqa) of india is also regarded as India’s malcolm baldrige-the ultimate recognition for quality. This is the award given every year by the quality council of India (qci). Rajiv Gandhi National Quality Award To Indian industries. The structural models of Rajiv Gandhi national quality award is quite similar to European quality award.