Dutest is one of the first and most experienced third party inspection bodies and suppliers of lifting equipment throughout the UAE. Dutest Lifting products are Chain Slings & Fittings, Wire Rope Slings & Fittings, General Lifting Gears, Shackles, Webbing Slings and Force Measuring Equipments. Please Visit us Dutest.com for more information.

1. Welcome to Dutest
Established In 1980, Dutest is one of the first and most
experienced third party inspection bodies and suppliers of
lifting equipment throughout the UAE.
Products and Services
Dutest contains two inter-divisions that cater to servicing the
market of petroleum, metal manufacturing, shipping,
contracting and crane rental companies to name a few. These
inter divisions are inspection and supply. The inspection division
inspects tests and certifies the entire range of lifting gear and
equipment, as well as other industrial equipment. The supply
division aids the inspection division through a variety of lifting
accessories as well as catering to general market demand.

2. About Dutest
Dutest is one of the most experienced third party inspection companies
throughout the UAE. Established in 1980, our services have extended across an
exhaustive list of prestigious clientele. We understand the local market and the
growing importance of occupational safety throughout the Middle East and,
henceforth, the necessity to provide proficient, robust and consistent goods and
services. The implementation of various quality management systems, such as
ISO 9001:2008 and ISO/IEC 17020:1998, as well as an international member of the
British Standards Institute, verifies our commitment to providing a qualityconsistent product, all backed up by an experienced LEEA (Lifting Equipment
Engineers Association) qualified engineering team. This, considering our
professional approach, competitive rates, exemplify why we remain one of the
market leaders today.
SEE OUR BRANDS:

3. Divisions
Manufacturing & Tradinging
The supply division of Dutest provides a wide range of lifting accessories and
safety equipment. This division aims to complement its inspection and testing
division, whilst also satisfying general demand for such products in the market.
Some of the product range fall under the headings of Wire Rope Slings and
Accessories, Chain Slings, Webbing Slings, Chain Blocks, Load Indicators and
Load Cells. All of these products conform to internationally recognized standards
such as BS EN, ASME and more.
Inspection & Testing
The Inspection division of Dutest is involved in third party inspection services of a
wide range of heavy plant, cranes and lifting and marine machinery. Some of the
brands that Dutest is specialized in servicing include Demag, Kone, Liebherr, Kato
and Tadano. These inspection services are carried out with state-of-the-art
technology such as Eddy Current, Thermal Imaging, NDT inspection (such as MPI
and Dye Penetrant Testing). This, combined with quality engineers who have all been
built on rigorous training and years of experience and who all are LEEA body audited,
ensures the highest quality and reliable inspection and testing services.

4. Lifting Supplies Products
Chain Slings & Fittings
Wire Rope Slings & Fittings
General Lifting
Gears

5. Shackles
Webbing Slings
Force Measuring Equipment's

6. Inspection & Testing Services
The Inspection Division of Dutest is involved in third party inspection services of
a wide range of heavy plant, cranes and lifting and marine equipment of brands
such as Demag, Kone, Liebherr, Kato and Tadano to name a few. These
inspection services are carried out with state of the art technology such as Eddy
Current, Thermal Imaging, NDT Inspection such as MPI and Dye Penetrate
Testing. This combined with quality engineers, which are all LEEA body audited,
ensures the most highly qualified and reliable inspection and testing services. In
addition, the company complies with highly regulated standards such as ISO
9001:2008 & ISO/IEC 17020:1998 that are both continually audited and renewed
by Det Norske Veritas and Dubai Accreditation Center.
 Dye Penetrate Testing :
Dye Penetrate is a method of detecting surface flaws (cracks) using a chemical
ink and a developer. The basic principle is to spray the area to be checked with a
penetrating ink (Red) which will leech in to any surface defects. This is then
cleaned off. A developer (White) is then sprayed over the same area and any
residual ink will show through the white indicating the location of any surface
defects. The sample or area to be inspected must be clean and free from paint,
corrosion or other surface coatings. Can be used on both ferrous and nonferrous material, will only detect surface cracks.

7. Thermal Imaging
Thermal Imaging (Thermography) is an optical method of recording heat signatures
of plant equipment and structures while in operation and location abnormalities or
temperature differences. This can be used in several ways. As a preventative
maintenance tool to show up items running hot, hot spots where an item may fail or
cause a fire or heat loss through insulation or thermal bridges. It can also be used as
predictive maintenance, where a bench mark image is taken and then compared with
subsequent images taken at a set period (say six months). This will show up
temperature changes, which may indicate deterioration of a process or equipment,
allowing scheduled maintenance to be planned so as to minimize impact on
production or services. Thermal imaging can also be used to investigate or locate leaks
or water ingress and insect damage or just measure the thermal efficiency of a
building.
Heavy Lifting Supervision
Heavy Lifting Supervision is carried out by Dutest occasionally. One example would
be the load out of 70 tons diesel generators from Sharjah Saif Zone, UAE to
Afghanistan. Effectively, Dutest takes charge of the planning, supervision of a lifting
operation from the early “Method Statement” phase, to “Lift Plan” and supervision
and execution of the actual lift, choice of crane and lifting tackle.

8. Load Testing
Load testing is part of Dutest’s normal crane and lifting gear examination and consists
of applying a load of suitable proportions to establish the integrity of the item being
tested.
Tirak / Minifor Services
Tirak and Minifors are rope hoists manufactured by Tractel France. Dutest is one of
the official service centers for these machines.
Crane Safety Equipment
Installation, calibration and maintenance of safe load indicators and tensile cells, as
well as training services for the Dutest SLI brand of load indicator are available in
association with Cantek (Australia). EOT Crane installation, maintenance and repair
services also available.

9. Recognition
Dutest one of the leading lifting inspection companies in the region. The quality and
reliability of our service is backed by a set of certifications, in-line with both national and
international standards.
Lifting Equipment Engineers Association Accredited engineers with over 25 years
experience:
ISO 9001:2008 Quality Management System Det Norske Veritas approved manufacture,
renewed and audited annually
Accredited and audited by the Dubai Accreditiation Center as per ISO/IEC 17020 :
1998.

10. At Your Service- contact
Dubai | Abu Dhabi
PO Box 5389, Dubai, UAE.
Tel: +971-4-8067700
Fax:+971-4-8067701
Email: dutest@bindasmal.com
Website: www.dutest.com
Regional Sales Network:
OMAN | KSA | QATAR
PO Box 1084, P.C. 130,
Al Misfa New Industrial Area, Sultanate of Oman
Tel: +968 2443 7226
Fax: +968 2443 7220
Email: dasmaltrading@bindasmal.com
Web: www.dasmaltrading.com