1. ROP Construction, Inc.ROP Wall System(Tilt-up Construction) Better Wall System copyrighted 2007

2. ROP Wall System Interior and Exterior Walls of 2-1/4” to 2-3/4” (ready to paint) copyrighted 2007 Better Wall System

3. ROP Wall System . Stronger. OPTIMIZED structure. Spacious. Faster. 50% - 75% Lighter . Economical . Proven

4. ROP Wall System STRONGER . Stronger since ROP wall is SOLID like a vertical slab. .ROP Wall may be inserted with the columns and beams before pouring, thus making the walls, columns, and beams monolithic or acting as a single unit, therefore stronger.

5. ROP Wall System OPTIMIZED STRUCTURE .ROP Wall is Load Bearing up to 2,500 psi. . ROP Wall can prop the beam and directly transfer the load to the columns using embedded truss system. This makes ROP Wall System much better. What used to be a simple partition is now optimized structurally in making the building stronger and more economical.

6. ROP Wall System Optimized Structure Embedded Truss System Load Load Load = (floor loads, beam, wall) Load may be 1 to 3 floors Beam COMPRESSION COMPRESSION column column Beam TENSION

7. ROP Wall System Optimized Structure Embedded Truss System (High Rise) Earthquake Load A break in the truss system on every 3rd level minimizes the load transfer on the wall during wind and earthquake. Up to 67% of the load Is absorbed by the wall, thus relieving the columns and beams of stresses.

8. ROP Wall System Spacious . Additional 2.75” to 4.75” more space on all walls. . The columns and beams are smaller due to wall load reduction plus the wall can prop the beam and carry the load instead. .

9. ROP Wall System Faster .In 3 days the wall is tilted with all the jambs, electrical and plumbing fixtures already installed. . When erected, the wall is ready to paint and serves as shoring for the beams.

10. ROP Wall System Lighter . ROP wall system is very strong yet much lighter by 50% thus making the building safer during earthquake.

11. ROP Wall System ECONOMICAL . ROP Wall system uses only 50% of the concrete used by CHB walls. . The jambs, electrical and plumbing are embedded on the wall during casting unlike in CHB where the wall is chip off to provide electrical and plumbing lines. . No need for heavy equipment like cranes which makes construction convenient and economical.

12. ROP Wall System Proven . It’s more than 25 years in usage . Over 1,000 units built . NHA accredited . Aitech accredited . Registered Philippine Patent . Used by Filinvest