JBEIL Subsea Engineers Pvt. Ltd. is an engineering firm that specializes in subsea pipeline and SURF (Subsea Umbilicals Risers and Flowlines) design. They provide engineering services including route selection, hydraulic analysis, mechanical design, on-bottom stability analysis, spanning analysis, buckling analysis, and stress analysis. They have experience with major subsea pipeline projects in Australia, Russia, India, and other locations. Their team of engineers is led by Rajendra Kumar, who has over 20 years of experience in subsea pipeline design, and Yatish Yale, who focuses on installation engineering.
2. Capability Overview
We at JBEIL Subsea re extensively involved in
the engineering for submarine Pipelines and
SURF (Subsea Umbilicals Risers & Flowlines).
Route Selection Study
Work profile includes Pipeline Mechanical De-
sign, Pipeline Flow Simulation, Pipeline Allow-
Hydraulic Analysis
able Free Span Analysis, Bottom Roughness
Analysis, Crossing Analysis, Riser Flexibility Mechanical Design
Analysis, Installation Engineering like Push-Pull
Operations, Lay Analysis, Tie-in Analysis etc. On-bottom Stability Check
Spanning Analysis
Also, we are involved in the technical bid prepa-
ration, review of specification, technical bid Global Buckling Analysis
evaluation and project management activities.
End Expansion Analysis
We are very well conversant with software Stress Analysis
packages like :
Pipelay Analysis
OFFPIPE
SURF Lay Analysis
ORCAFLEX
CAESAR II Pile Design
PIPESIM
SACS Pile Drivability Analysis
STAAD III
AutoCAD Heavy Lift Analysis
SPM Related Analysis
3. Engineering Services
Route Selection, pipelines are generally unable to follow the direct
traight line route for many reasons, due to land/seabed obstructions,
crossings, land/seabed.
Hydraulic Analysis, pipeline diameter is sized for peak flow and
ensures that flow conditions and pressure drop are within acceptable
ranges. However, one must also check for low flow condition in case
his leads to laminar flow and corrosion at the bottom of the pipe will
occurred.
Mechanical Design, the principle for wall thickness sizing is to make the
wall thick enough to contain the maximum allowable operating pres-
sure, although there are many factors to take into account which may
lead to the selection of a thicker wall.
On-bottom Stability Analysis, this analysis is performed to ensure that
the pipeline is stable on the seabed under the influence of extreme
environmental conditions.
Spanning Analysis, unsupported pipeline (Free Span Pipeline) be-
tween two points will be subjected to a number of loads. These com-
prise bending under its self weight, loads imposed by pressure, hydro-
dynamic loading, etc.
Global Buckling Analysis, this analysis is performed to analyze pipe-
line susceptibility to both lateral and upheaval buckling. End expansion
analysis this analysis is performed to calculate pipeline expansions
due to temperature, longitudinal stress, etc.
Stress Analysis, this analysis is performed to check pipeline system
stresses such as hoop stress, bending stress, longitudinal stress, etc
against their allowable stress limits stated in design code.
Pipelay Analysis, this analysis is performed to check layability of the
Pipeline in S-lay or J-lay methods. This helps to ascertain the Derrick
Barge or pipelaay vessel adequacy for pipelay operation. The Pipelay
Manual provides max. wave Hs, required tension, barge roller support
configuration etc for the entire pipelay operation. The analysis is done
using OFFPIPE (Static & Dynamic).
SURF Analysis, this analysis is performed using the software - Orcaflex.
It determine the required lay parameters (i.e. limiting seasates, re-
quired tension etc.). Suitable modifications & precautions can made
and taken to be with in Design Limits of the SURF product.
4. Experience
The team is being lead by Mr. K.P. Rajendra Kumar who has over 20
years of experience in Subsea Pipeline Design, Structural & Geo-
technical Engineering.
The Installation Engineering is being guided by Mr. Yatish Yale M
who has a rich experience in Pipeline & SURF Installation Engineering
with leading offshore EPCI contractors.
Below are some of the projects the team members have been in-
volved in over the years:
Macedon 20” Gas Pipeline Project
Location: Perth, Australia
Client: BHPB Billiton
Kipper Tuna Project
Location: Perth, Australia
Client: Esso Australia
Sakhalin Arkutun Dagi Pipeline Project
Location: Sakhalin, Russia
Client: Exxon Neftegas Limited
Design of Outfall Subsea Pipeline System
Location: Cape Preston Port, Perth,Australia
Client: Sino Iron Ore Project
Bina SPM and Offshore 48” Subsea Pipeline Project
Location: Vadinar, Gujarath, India
Client: Bharat Oman Refineries Limited (BORL)
MIDIA SPM and Offshore 40” Subsea Export Pipeline
Location: Black Sea, Romania
Client: Media Marine Terminal Srl
Ravva Additional Pipelines Project – India
Location: Kakinada, India
Client: Cairn Energy, India
48” Diameter Offshore Pipeline and SPM project
Location: Kochi, India
Client: Leighton Contractors (INIDA)
5. Contacts us
JBEIL SUBSEA ENGINEERS PVT. LTD.
305 - City Arcade,
Near Bendoorwell Junction,
Mangalore- 575002,
India
: +91 (0)824 4264 142
: +91 (0)824 4264 141
: contactus@jbeilsubsea.com
Mr. Rajendra Kumar K P
C.E.O
: +91 990 2020 285
: +91 (0)824 4264 142
: kumarrajendra@jbeilsubsea.com
Mr. Yatish Yale M
Director - Pipelines & SURF
: +91 998 0222 095
: +91 (0)824 4264 142
: yyale@jbeilsubsea.com