This document provides installation instructions for a desk mount sit-stand workstation. It has a maximum weight capacity of 35 pounds and allows height adjustment by squeezing levers on both sides to move the workstation up and down. The workstation also allows keyboard tilt adjustment between -10 and +10 degrees by loosening a knob, setting the tray at a desired angle, and re-tightening the knob. A warning is given that serious injury or property damage could occur if the maximum weight capacity is exceeded.

1. 5230180 Rev. A
INSTALLATION / INSTRUCTIONS
DESK MOUNT SIT-STAND WORKSTATION
WEIGHT CAPACITY - A + B ≤ 35 lbs.
HEIGHT ADJUSTMENT
KEYBOARD TILT ADJUSTMENT
Squeeze levers on both sides simultaneously to move workstation up and down to
desired height. Release levers to lock the workstation into position. The product
will not be activated when squeezing only one lever.
While holding the tray, loosen knob slightly.
Set and hold tray at desired tilt angle and re-tighten knob.
B ≤ 5 lbs.
A ≤ 35 lbs.
!
Maximum weight capacity is 35 lbs.
Serious injury or property damage may
occur if maximum is exceeded.
Make sure all cord lengths are
sufficient to use with this product.
IMPORTANT INFORMATION
Lift the workstation out of the box, do not squeeze the levers until after the product is in place.
-10°/+10° tilt