Find out more about Infineon on our Homepage: www.infineon.com
Find here all Information about Battery powered Applications, Package Information and Motor Control Secection Matrix for OptiMOS™ and Small Signal.
1. Selection Guide for
Battery Powered Motor Drives
Designed to Drive Your Innovation
www.infineon.com/motorcontrol
2. 2
Ictam quodita dolorep
300W Motor Control Application Kit
A High Efficiency Demonstrator Driving Your Innovation
The 300W Motor Control Application Kit features Infineon’s OptiMOS™ technology,
providing a simple to use Evaluation Board for testing and analyzing any brushless DC motor
equipped with hall sensors. The components of the board include 6 pieces of OptiMOS™
(BSC016N06N3 G), an EiceDRIVER™ (6ED003L02-F2) and a Microcontroller (XC836).
Together they enable brushless DC motors to run up to 300W without additional cooling.
Key features and benefits
n High efficiency MOSFETs and MCU
n Easy plug and play software with Graphical User Interface
for fast testing of the board
n Suitable for any BLDC motors with hall sensors
n Optimized thermal management
n Voltage, current and speed control possible
For further information please visit our website:
www.infineon.com/motorcontrolapplicationkit Watch the Video!
3. 3
Solution Matrix
EiceDRIVER™ Compact (2EDL23N06)
XMC 4000
EiceDRIVER™ Compact
(2EDL05N06, 6EDL04N02PR, 6ED003L02-F2)
XMC 1000
OptiMOS™ 20V-60V
Small Signal (SOT-363, TSOP-6)
Forklift
Light
Electric
Vehicle
Cordless Tools
Showing only drives dedicated devices. For complete portfolio, please check our homepage www.infineon.com
OptiMOS™ 60V-150V
Solution Matrix for Battery Powered Motor Drives
Offering Industry’s Leading High Performance Products
MOSFET
Driver ICs
Microcontroller
Based on Industry Leading Technology, highest quality
and manufacturing expertise Infineon provides a variety
of innovative power semiconductors which enables
designers to develop highly reliable and efficient
solutions for all kinds of drive applications.
4. 4
Forklift Solution
Forklift Solution
Highest Performance and Innovative Solutions
Requirements such as highest current capability, optimized
thermal performance and reliable operation in harsh
environments are essential for all kinds of Forklift designs.
Therefore, Infineon offers a broad range of products
demonstrating lowest RDS(on)
, highest current capability up to
300A and a wide selection of innovative package solutions.
System Voltage Class Voltage Class D2
PAK D2
PAK 7pin TO-Leadless
24V 60V IPB029N06N3 G IPB010N06N IPT007N06N
36V 80V IPB025N08N3 G IPB019N08N3 G
48V 100V IPB027N10N3 G IPB025N10N3 G IPT020N10N3
72V/ 80V 150V IPB 072N15N3 G IPB065N15N3 G IPT059N15N3
Infineon’s OptiMOS™ for Forklift Applications
Brushless
DC Motor Driver Stage
Sensor
Sensor
Sensor
DC /DC
Regulators
Controller
XMC-Microcontroller
OptiMOS™ EiceDRIVER™
5. 5
Forklift Solution
Infineon’s EiceDRIVER™ for Forklift Applications
Infineon’s ARM®
Cortex™ based Microcontroller Family
XMC4100 XMC4200 XMC4400 XMC4500
System Core ARM®
Cortex™ M4
CPU Frequency 80MHz 80MHz 120MHz 120MHz
Co-Processor Floating Point Unit
Flash Size 128kB 256kB 512kB 1MB
RAM Size 20kB 40kB 80kB 160kB
Cache 4kB 4kB 4kB 4kB
Timers POSIF 1x 1x 2x 2x
CCU4 (4ch) 2x 2x 4x 4x
CCU8 (4ch) 1x 1x 2x 2x
High-resolution PWM (150ps) Channels 4x 4x 4x -
Signal Processing ADC 12-bit 2x 2x 4x 4x
Δ∑ Demodulator - - 4x 4x
DAC 2x 2x 2x 2x
Communication IEEE 15BB Ethernet MAC - - 1x 1x
USB FS DEV FS DEV FS OTG FS OTG
SDIO/SD/MMC - - -
Serial Channels (UART, SPI, I2
C, I2
S) 4x 4x 4x 4x
External Memory I/F - - -
CAN 2x 2x 2x 3x
Topology DSO-8 DSO-14
Halfbridge 2EDL05N06PF 2EDL23N06PJ
6. 6
Cordless Tool Solution
Cordless Tool Solution
Highest Power Density and System Efficiency
Depending on the topology, cordless tools require either
space optimized designs for system miniaturization or
cost optimized solutions to decrease total system costs.
For both requirements Infineon offers the right products
with low RDS(on)
in compact packages such as SuperSO8 and
products at an excellent price/performance ratio without
sacrificing product performance and reliability.
System Voltage Class Voltage Class TO-220 SuperSO8 CanPAK™
< 18V 30V BSC011N03LS BSB012N03LX3 G
≥ 18V - 24V 40V IPP015N04N G BSC010N04LS BSB014N04LX3 G
36V 60V IPP024N06N3 G BSC014N06NS BSB028N06NN3 G
Infineon’s OptiMOS™ for Cordless Tools
Brushless
DC Motor Driver Stage
Sensor
Sensor
Sensor
Brushed
DC Motor
DC /DC
Regulators
Controller
Driver Stage
XMC-Microcontroller
OptiMOS™ EiceDRIVER™
OptiMOS™ EiceDRIVER™
7. 7
Cordless Tool Solution
Infineon’s EiceDRIVER™ for Cordless Tools
Infineon’s ARM®
Cortex™ based Microcontroller Family
Topology DSO-8 DSO-14 TSSOP-28
Halfbridge 2EDL05N06PF 2EDL05N06PJ
3-Phase (B6) 6EDL04N02PR
6ED003L06-F2
XMC1300
System Performance Core ARM®
Cortex™ M0
CPU Frequency 32 MHz
Co-Processor MATH
Flash Size 8-200kB
RAM Size 16kB
POSIF 1x
Timers CCU4 (4ch) 1x
CCU8 (4ch) 1x
Signal Processing ADC 12-bit 1x (2x S&H)
Coparator 3x
Communication Serial Channels (UART, SPI, I2
, I2
S) 2 Channel
Application Specific LED Dimming & Color Control
8. 8
Light Electric Vehicle Solution
Light Electric Vehicle Solution
Performance Leadership and System Solution
With a broad portfolio of Microcontrollers and power
devices Infineon is able to meet a wide range of
requirements for Light Electric Vehicles such as e-Scooters,
Pedelecs or Microcars. Our products demonstrate
outstanding reliability and quality as well as a very high
current capability and excellent thermal performance.
Infineon’s OptiMOS™ for Light Electric Vehicles
Brushless
DC Motor Driver Stage
Sensor
Sensor
Sensor
DC /DC
Regulators
Controller
XMC-Microcontroller
OptiMOS™ EiceDRIVER™
System Voltage Class Voltage Class D2
PAK D2
PAK 7pin TO-Leadless TO-220
24V 60V IPP032N06N3 G
75V IPB020NE7N3 IPP034NE7N3
36V 80V IPB025N08N3 G IPB019N08N3 G IPP037N08N3
48V 100V IPB027N10N3 G IPB025N10N3 G IPT020N10N3 IPP045N10N3
72V 150V IPB072N15N3 G IPB065N15N3 G IPT059N15N3
9. 9
Light Electric Vehicle Solution
Infineon’s EiceDRIVER™ for Light Electric Vehicles
Infineon’s ARM®
Cortex™ based Microcontroller Family
XMC4100 XMC4200 XMC4400 XMC4500
System Core ARM®
Cortex™ M4
CPU Frequency 80MHz 80MHz 120MHz 120MHz
Co-Processor Floating Point Unit
Flash Size 128kB 256kB 512kB 1MB
RAM Size 20kB 40kB 80kB 160kB
Cache 4kB 4kB 4kB 4kB
Timers POSIF 1x 1x 2x 2x
CCU4 (4ch) 2x 2x 4x 4x
CCU8 (4ch) 1x 1x 2x 2x
High-resolution PWM (150ps) Channels 4x 4x 4x -
Signal Processing ADC 12-bit 2x 2x 4x 4x
Δ∑ Demodulator - - 4x 4x
DAC 2x 2x 2x 2x
Communication IEEE 15BB Ethernet MAC - - 1x 1x
USB FS DEV FS DEV FS OTG FS OTG
SDIO/SD/MMC - - -
Serial Channels (UART, SPI, I2
C, I2
S) 4x 4x 4x 6x
External Memory I/F - - -
CAN 2x 2x 2x 3x
Application Specific Touch Control / LED Display Matrix
Topology DSO-8 DSO-14 TSSOP-28
Halfbridge 2EDL05N06PF 2EDL05N06PJ
3-Phase (B6) 6EDL04N02PR
6ED003L06-F2
10. 10
MOSFETs
Always a Step Ahead with Infineon
Leverage your Performance
Features
„„ High current capability
„„ Lowest RDS(on)
„„ Easy-to-design products
„„ Outstanding product quality
Benefits
„„ Enables optimized
thermal management
„„ Enables system cost reduction & system
miniaturization
„„ Extending battery lifetime
„„ Reliable operation in
harsh environments
Within the motor control market segment low voltage applications include
the sub segment battery powered applications. These are high current
applications such as Forklift, e-Scooter, Pedelecs or Cordless Power Tools with
a wide range of system power from 1W to 50kW.
These applications require:
„„ extension of battery lifetime and range
„„ reliable operation in harsh environments
„„ system miniaturization and cost reduction
„„ optimized thermal management
Infineon offers a comprehensive motor control and drives solution portfolio
containing leading edge technologies in low voltage Power MOSFETs,
Driver ICs, position sensors (hall and angle sensors) and the newest ARM®
Cortex™-M4 based MCU. These products enable efficient, robust and cost-
effective designs for all types of motors.
OptiMOS™ – the right switch for each battery powered drive application
www.infineon.com/optimos
12 24 36 48 72 80 100 150
300
250
200
150
120
100
75/80
60
40
30
25
0
HOTTER
System Voltage [V]
MOSFETVoltage[V]
11. 11
Soloreiust cone pratende
TO-Leadless
A Package Optimized for High Current Applications
Infineon’s new TO-Leadless package is especially designed for high current applications such as
Forklift, Light Electric Vehicles, e-fuse, PoL (Point of Load) and Telecom where highest efficiency
and reliability are required. 300A continuous current can now be handled using just one single
part. Furthermore, compared to D2
PAK 7pin, this significantly smaller package with 60% size
reduction offers a very compact design and a substantial reduction of 30% in the footprint.
Key features and benefits
n Industry’s lowest RDS(on)
, reduced footprint and space
– Enables highest efficiency and system cost reduction
n Highest current capability up to 300A
– Requires less cooling
n Reduced package parasitics
– Enables improved EMI-performance
– Lower package losses
For further information please visit our Website:
www.infineon.com/toll Watch the Video!
12. 12
MOSFETs
Power MOSFETs OptiMOS™ 20V-300V
The Right MOSFET for Each System
Highest efficiency with SuperSO8
Moving from TO-220 to SuperSO8 reduces
space consumption drastically and offers
lower parasitic, highest efficiency and lo-
west design effort due to reduced spikes.
D²PAK optimized for
high power applications
A change from TO-220 to D2
PAK 7pin gives
several advantages and offers an ideal
combination of industry’s lowest RDS(on)
and high current capability. Furthermore,
it comes with very low package parasitics
and enables highest system reliability due
to no hot spot.
TO-Leadless – industry’s highest
current capability
TO-Leadless is a package optimized for
high current applications with a current
capability of 300A. It enables compact de-
signs due to reduced footprint and height
compact designs.
Infineon provides a comprehensive portfolio of low voltage MOSFETs
supporting all requirements for Battery Powered Applications. The Power
MOSFET family - OptiMOS™ 20V up to 300V is consistently setting the
benchmark in key specifications for drives system designs, including leading
on-state resistance or highest current capability which lead to reduced power
losses and improved system reliability.
Infineon’s OptiMOS™ is available in innovative packages which are either
optimized for space saving such as CanPAK™ or SuperSO8 or optimized for
high current such as TO-Leadless.
Benefits of Infineon components
Reliable and robust products for highest system durability and reliability
„„ Lowest RDS(on)
0.7mΩ in TOLL and highest current 300A capability for
highest system efficiency
„„ Small form factors for compact design e.g. SuperS08 30mm², TOLL 115mm²
leading to reduction of overall system size and cost
„„ Evaluation boards for fast prototyping and testing and in-depth system
support enable reduction of development time and cost
25 50 100 150 200 250 300 350
2.5
2.0
1.5
1.0
0.5
0
S308
CanPAK™ S/M
SuperSO8
TO-Leadless
TO-220D2
PAK 7pin
D2
PAK
COOLER
SMALLER
HOTTER
LARGER
DPAK
Package Area [mm²]
ThermalResistance[K/W]
14. 14
Driver ICs
EiceDRIVER™ Compact
600V Half Bridge Driver ICs for Battery Powered Applications
Features
„„ High creepage distance in DSO-14
„„ Integrated low-ohmic bootstrap diode
„„ Specific undervoltage lockout levels
for MOSFET
„„ Rail-to-rail output
Applications
„„ Fans, Pumps
„„ Forklift and Low Speed Cars
„„ e-Scooter, e-Bikes
Developers of battery powered applications continuously strive for higher
efficiency of applications and smaller form factors. One area of interest is,
that the switching behavior and power losses of new Power MOSFETs can be
optimized by dedicated driver ICs.
Infineon’s new 2EDL EiceDRIVER™ Compact is a 600V half bridge gate
driver IC family. Its level-shift SOI (Silicon-On-Insulator) technology supports
both design goals. With the monolithic integrated low-ohmic and ultrafast
bootstrap diode this new generation 2EDL is a benchmark for driver ICs in the
market with more than 2A output current.
2EDL05N06PF (DSO-8) and 2EDL05N06PJ (DSO-14) are driver ICs with the
same features, but with undervoltage-logout for MOSFETs. These two parts are
recommended for low voltage drives such as e-Bikes.
2EDL23N06PJ (DSO-14) is a 2.3A half bridge driver ICs for MOSFETs. It provides
interlock, deadtime and in addition enable, fault and overcurrent protection.
It is well performed for e-Scooter and Forklift.
Sales Code and Package
(150mil)
2EDL05N06PF (DSO-8)
2EDL05N06PJ (DSO-14)
2EDL23N06PJ (DSO-14)
Applications LV-Drives, e-Bike, Battery, Forklift,
Power Tools (Cordless)
Battery, e-Scooter, Forklift,
Power Tools (Cordless)
Blocking Voltage 600V 600V
Output Current 0.25A /-0.5A 1.8A / -2.3A
Integrated Bootsrap Function Ultrafast BS diode and BS resistor Ultrafast BS diode and BS resistor
UVLO (latest turn-off) MOSFET (7.5V) MOSFET (7.5V)
Features Deadtime, interlock Deadtime, interlock enable, fault, OCP
www.infineon.com/eicedriver
RLIM DBSVDD
GND
VB CBS
VBUS
HO
VS
LO
2EDL-family
15. 15
Microcontroller
XMC – 32-bit Industrial Microcontroller
Over 100 Devices Arranged in a Portfolio Optimized for Industrial Applications
XMC 32-bit MCU portfolio offers a wide and scalable set of products delivering
outstanding real-time performance, powerful features and high integration,
high quality standards and long-term product availability as well as high oper-
ating temperature.
XMC1000 Family
„„ Up to 32MHz ARM®
Cortex™-M0
„„ 64MHz Math Co-Processor (CORDIC)
„„ 8kB to 200kB Flash
„„ 16kB SRAM
„„ Up to 32 general purpose IOs (GPIOs)
„„ Rich analog-mixed signal (ADC, CMP)
„„ Precision Timing/PWM (up to 64MHz)
„„ Configurable communication interfaces
„„ Application specific peripherals
„„ Brightness Color Control Unit (BCCU)
„„ LED Matrix and Touch (LEDTS)
„„ Position Interface (POSIF)
Operating Conditions
„„ Temperature: -40°C to 105°C TAMBIENT
„„ Voltage: 1.8V to 5.5V
XMC4000 Family
„„ Up to 120MHz ARM®
Cortex™-M4
„„ DSP, FPU, DMA and MPU
„„ 64kB to 1MB Flash with ECC
„„ 20 to 160kB SRAM with up to 4kB Cache
„„ Up to 91 general purpose IOs (GPIOs)
„„ Rich analog-mixed signal (ADC, DAC)
„„ Precision Timing/PWM (up to 120MHz)
„„ Configurable communication interfaces
„„ Application specific peripherals
„„ Delta-Sigma-(Δ∑)-Demodulator
„„ High Resolution PMW (150ps, HRPWM)
„„ POSIF, EBU, USB, SD/MMC, Ethernet
Operating Conditions
„„ Temperature: -40°C to 125°C TAMBIENT
„„ Voltage: 3.13V to 3.63V
XMC1100
Basic Series
XMC1200
+ BCCU
+LEDTS
XMC1300
+ CORDIC
+ ERU
XMC4100
Basic Series
XMC4200
+ MEMORY
+GPIOs
XMC4400
+ MEMORY
+ ETHERNET
XMC4500
+SD Card
+ EBU
Feature Integration
Performance
ARM®
Cortex™-M4
with DSP, FPU, MPU, DMA
M
ore
than
100
devices
www.infineon.com/XMC
www.infineon.com/DAVE
www.infineon.com/IEC60730
New ARM®
Cortex™ based Microcontroller Family
XMC MCUs are architectured for embedded industrial applications and characterize by
„„ Application specific feature – Delta-Sigma-(Δ∑)-Demodulator (DSD),
High Resolution PWM, Brightness Color Control Unit
„„ Precision and Control – Timer/PWM (CCU) can run up to 120MHz,
up to 64-bit width offering fault inputs and binary / floating clock prescaler
„„ Real-Time and Process Parallelization – Module Interconnect Matrix,
interaction between peripherals to offload CPU
„„ Quality and Robustness – Error Code Correction (ECC), Margin Check, Oper-
ating Temperature up to 125°C TAMBIENT
, >=20 years Data, Retention,
Built-in Safety Feature (Window Watchdog, Broken Wire Detection) and
free IEC60730 Class B library
Ecosystem
„„ The wide ARM®
Ecosystem (Atollic, IAR, Keil MDK, Rowley, TASKING and others)
„„ Free Infineon DAVE™
„„ Eclipse CDT based IDE
„„ ARM®
GNU compiler
„„ Free debugger and Flash loader
„„ Data visualization tool called xSPY
„„ Providing a resource solver
„„ DAVE™ Apps – a tailored and object-oriented software library of 170 Apps
to efficiently use the innovative set of peripherals of the XMC MCUs