2. Reference projekt
2012
Product care of manual milking equipment
DeLaval is a large supplier of milking equipment for the dairy business. They have products ranging
from manual use to automated robot controlled milking. The company is present in over 100 countries
worldwide.
Demands
• Handel quality errands and make improvements on existing products for manual milking
Design/Workflow
• Investigate cause of and finding a solution for problems with existing products
My work has included:
• Plastic and rubber parts design
• Sheet metal design
• Re design of drive line
• Requirements specification of photo sensors
• Evaluation with rapid prototyping and test in lab and FEM-analysis
• Documentation of case solutions
Development tools
Solid Edge, Sensei-PDM, SIBEL, Excel
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se
3. Reference projekt
2011
Electro mechanical design of audio management system
Catron Elektronik AB is a Swedish electronic company specialized in audio control technology. The
SAAB Erieye is the world’s only operational airborne Active Electronically Scanned Array (AESA) radar
in service today. The plane is used for border control, disaster management, and national security mis-
sion’s etcetera. Catron is supplier of the sound management system that handles all voice communica-
tion on board.
Demands
• Design of enclosure for electronics and design of panel interfaces to users according to:
• EMC
• Light scattering
• PCB layout
Design/Workflow
• Sheet metal design of data management units, speaker units, control panels
• Machined mold boxes and panel interface components including overlays
• Collaboration with hardware-, software designers and assemblers
• Documentation of cable boards
Development tools
SolidWorks
Other
Implemented 3D-CAD and design rules.
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se
4. Reference projekt
2010-2011
Design/product care of flywheel exercise equipment
YoYo Technology is an innovative exercise company. They have introduced and patented the exercise
method of flywheel resistance training. The fly wheel technology is used in collaboration with ESA and
NASA-projects for weight less training in space and is also used by top athletes.
Demands
• Pre study for a combined strength/cardio training equipment for use at space stations.
Including sensor implementation and design of recoil system.
• Design/product care of exercise equipment
Design/Workflow
• Welded steel structures
• Aluminum frame structures
• Sheet-metal design
• Ergonomic seat designs
• Design for cost reduction and user interface improvements
• Sensor integration
• Clutch and recoil system design
Development tools
SolidWorks, Workgroup-PDM, Excel
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se
5. Reference projekt
2009 - 2010
Quality control of production documentation
Ålö is a major manufacturer of front end loaders with associated equipment. Their company have more
than 25 percent of the world market in the segment of agricultural tractors with engines stronger than
50 hp. The associated equipment for front end loaders consists of different kind of bale handling
equipment and buckets. The production of this equipment was moved to a new ÅLÖ-plant in China.
Demands
• All production drawings must be quality assured
• Check drawing against current manufacturing
• Standardized drawings
• Tolerance stack-up calculations
• Material conversions
Design/Workflow
• Investigation of current manufacturing. Including visits to all premises. Cooperation with production
engineers, quality and purchasing managers.
• Manufacturing includes:
• Edge press, Edge folding, Tube bending, Stamping dies
• Welding (manual and robot controlled (no weald bead finder))
• Laser-, Plasma cutting
• Forging
• Machining
• Dip coating, Spray painting
• Optimization of production in regards to drawings standardization, material conversions and
product customization
Development tools
Solid Edge, Smarteam, Excel
Other
Was part of implementing SharePoint interface, for continuous follow up of production in the new
factory.
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se
6. Reference projekt
2008 - 2011
Design of new nose cone for X2000 trains
SJ (formally SJ AB) is a government-owned passenger train operator in Sweden. SJ have during the
last years changed the nose cone design to facilitate the possibility of coupling two train sets together.
The aim of this project was to achive easy coupling ability and increase protection and esthetic look of
the train.
Demands
• Designed to never be taken of the train
• Designed for economic series production
• Withstanding extreme climate
• Achieve a life time of 10 years
• Protecting sensitive parts of the train from wildlife accidents
• No need for tools when operating the cone, easy to lift and close
• Follow existing streamlines of the train
Design/Workflow
• A two parted cone was designed. One fix part and one movable
• Optimization of four link mechanism, including ergonomic relief
• Movable nose cone of reinforced glass fiber. (Two part injection mold tool)
• Fixed nose part (Vacuum mold tool)
• Verification prototype 1:1 scale design
• Verification tests in collaboration with CAE engineer
• Fixtures for manufacturing and assembly
• Manuals for assembling and handling
Development tools
SolidWorks, Excel, Hyperworks Motion, Word
Other
During a major part of the project I was project manager as well as mechanical designer.
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se
7. Reference projekt
2008
Design of waste disposal unit for marine use
Uson Marine manufactures waste handling equipment for marine use. Examples of clients are cruise
ships and oil rigs. To expand waste handling possibilities a new shredder series was needed.
Demands
• Development of new shredder series including stands
• Varying waste such as plastic wrap, reinforced construction bags, food scraps and tin cans
• Corrosive environment
• Possibility of hang mounted shredder unit
• Personal safety according to CE regulations
• Ergonomic user interface
• Able to manage load cases of up to 8000Nm
Design/Workflow
• Welded steel construction, stand, hopper, torque rods, door designs
• Bearing arrangement with a protective sealing system
• Magnetically safety switches
• Excel-sheet transmission design including: press-fitting, keyed connection, fatigue design of
shaft and gear train. FEM-analysis of the torque rod
• Development of product family with different choice of motors and shredder sizes
Development tools
Solidworks, CosmosWorks, Excel
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se
8. Referens project
2007
Design of optomechanical laboratory equipment
Portendo develops and markets threat detection equipment for homeland, military and commercial
security industries. Portendo’s technology aim to increase safety and operational capability in high-risk
environments by providing detection of explosives, warfare agents and hazardous chemicals. Detection
is made at a safe distance using laser technique. Portendo wanted a laboratory equipment to test this
technique. I was responsible for the mechanical design of this equipment.
Demands
• Design of unit for holding the laser and optical measurement equipment
• Adjustable lenses with position feedback
Design/Workflow
• Design of optical mounts
• Positioning by linear ways and lead screws
• Position feedback through positioning indicators
• Aluminum frame
Design tools
SolidWorks
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se
9. Employment
2005-2007
Application engineer
NOMO is a trading house with over 70 employees. They have Scandinavia´s broadest assortment of
ball- and roller bearings. They also sell plain bearings, linear bearings, bearing houses, seals and many
other machine elements. I was employed at Nomo:s engineering apartment as an application engineer.
Work description
My main function was to help engineers to select bearing for their applications.
Example of support could be:
• Cost savings • Selection of bearing and bearing arrangements
• Compact design • Shaft and housing design
• High speed application • Bearing dimensioning
• Bearing damage analyses • Bearing handling and mounting/dismounting instructions
• Special environments’ • Recommendations of bearing fits, clearance, preloading methods
• Bearing lifetime studies • Recommendations of seals and lubrication
Experience
I have a good knowledge regarding what kind of bearing is appropriate for different applications. As
a trading house employee I had contact with large bearing companies from all over the world. I was
responsible over NOMO:s drawing archive. I created educational material and educated staff and
customers in Sweden.
Education
I was educated from both NOMO and from the companies that we represented, for example: NSK,
TIMKEN and GGB.
Development tools
Alibre design (3D-CAD) ,NSK, TIMKEN, GGB-calculation programs, excel, PowerPoint
Anders Lund
Stockholm Sweden
+46 (0)73 9063560 info@anderslund.se www.anderslund.se