eMBMS is evolved Multimedia Broadcast and Multicast Services that allows efficient one-to-many transmission of common content over LTE networks. It uses simulcast transmission from multiple cells within an MBSFN area that appears as a single transmission to users. eMBMS leverages the LTE infrastructure for cost-effective delivery of live video/audio streaming, file downloads and other multimedia broadcasts to a large audience. It provides throughput as high as 17Mbps using 10MHz of shared LTE spectrum for both unicast and broadcast traffic.
1. eMBMS - the future of
Multimedia Broadcasting?
By: Isybel Harto
2. What is eMBMS
eMBMS is evolved Multimedia Broadcast and Multicast Services.
Why Broadcast?
•One to many transmission.
•More efficiency and lower cost for common
content.
•Apps: Live Video/Audio Streaming, Push
Media, E-Publication, Application Download,
OS Updates.
3. Support in LTE (E-UTRAN) over Single
Frequency Network (MBSFN)
1.
2.
3.
Simulcast transmission technique
realised by transmission of identical
waveforms at the same time from
multiple cells.
An MBSFN transmission from multiple
cells within an MBSFN Area is seen as a
single transmission by a UE.
MBSFN reception is possible in
connected and idle states independent
of incoming or outgoing calls
6. MBMS service area (1/2)
• eNBs transmitting MBSFN are required to be synchronised in
time
• Overlap between MBSFN areas is supported
• One cell can belong to several MBSFN areas (up to 8 MCCHs)
• An MBMS capable UE is required to receive the signal of at least one of
the MBSFN areas
• Reserved cells do not contribute to MBSFN, but are timesynchronised to the cells in the MBSFN area and have restricted
power on MBSFN resources in order to limit interference
7. MBMS service area (2/2)
• One cell can be belong to up 8 MBSFN areas and it can serve
multiple Service Areas (SA)
8. MBMS channels
•
Downlink channels related to MBMS
–
–
–
–
•
•
•
MCCH
MTCH
MCH
PMCH
Multicast Control Channel
Multicast Traffic Channel
Multicast Channel
Physical Multicast Channel
Multiplexing of MBMS and unicast is realized in the time domain only
MCH is transmitted over MBSFN in specific subrames on physical layer
MCH is a downlink only channel (no HARQ, no RLC repetitions)
– Higher Layer Forward Error Correction (see TS26.346)
•
•
•
A single transport block is used per subframe
Different services (MTCHs and MCCH) can be multiplexed
The MCS of each MCH is fixed in the MBSFN area and selected by the
network
9. Frame structure for shared carriers
•
TDM principle
– MBSFN is not transmitted in subframes 0, 4, 5 and 9 (FDD)
and subframes 0, 1, 2, 5, 6 (TDD)
– The subframe ratio available for MBMS ranges from 1/320 to 192/320
– A 10/40ms pattern repeats over {1, 2, 4, 8, 16, 32}radio frames
•
Single MBSFN subframe contains single cell control part and MBSFN part
Single cell transmission
Multi-cell transmission
10. Main characteristics of MBSFN
Transmission scheme
OFDM
Channel bandwidths
1.4, 3, 5, 10, 15, 20 MHz
Carrier spacing
15 kHz
Guard interval
16.7 us
Modulation schemes
MIMO scheme
Transport block
transmission duration
QPSK, 16QAM, 64QAM
single antenna port
1 ms
Number of coded blocks
per transport block
Variable
Typical transmit power
The eNodeB (Macro cells) maximum transmit power is
left to implementation, but most coexistence analyses
assume Macro Tx Powers around 40W (46dBm)
11. Reference signals
• Single antenna port
• Close frequency spacing to support larger delay
spreads
extended cyclic prefix, 15kHz carrier spacing
12. MBMS overall architecture
• BMSC (broadcast multicast service
center): provides functions for
MBMS user service initiation and
delivery
• MBMS-GW (MBMS gateway):
broadcasts MBMS packets to each
eNB transmitting the service on
M1 interface
• MCE (Multi-cell Coordination
Entity): Allocates or not the radio
resources used by eNBs in the same
MBSFN area Configures MBSFN
subframes for MBMS control and data
broadcast Ensures that the L2/L3 layers
in eNBs are well configured for MBSFN
operation Determines the MCS for
PMCH
13. MBMS RAN interfaces
•
Control plane interfaces
– M3, M2 interface are control plane interfaces
– M3 between MME and MCE carries MBMS session
management signaling
– A MCE is connected to all eNBs within the same MBSFN
area through M2 interface mainly for MBMS session
management signaling and radio configuration
signaling
•
User plane interface
– M1 interface is a user plane interface (no uplink data
and no control plane)
– A MBMS GW is connected to multiple eNBs through
M1 interface for data distribution
– IP multicast is used to deliver the downlink packets and
SYNC protocol is used over the M1 interface to keep
the content synchronization
15. eMBMS Summary
• eMBMS provides an efficient and low-cost solution to deliver
common multimedia content
– Reaches a high scalable number of subscriber for mass audience
events
– Effective capacity offloading from unicast
• Flexible carrier sharing between LTE unicast and broadcast
– Reuse LTE resource for eMBMS when and where needed
• eMBMS leverages LTE deployment and ecosystem for mass market
adoption
– Cost-effective upgrade to LTE network and device
• Simulation demonstrated up to 17Mbps eMBMS throughtput with
10MHz LTE carrier
– OFDM signal enhances the gain from single frequency network
transmission