SPSS statistics - how to use SPSS

PASW Statistics 17 (SPSS 17)
INFORMATION TECHNOLOGY SERVICES
California State University, Los Angeles
www.youtube.com/mycsula
Version 1.0 Winter 2010

Table of Contents
Introduction – Part 1...............................................................................................4

Downloading the Data Files....................................................................................4

Starting PASW Statistics........................................................................................4

The PASW Statistics Window................................................................................5

Data View.................................................................................................................5

Variable View..........................................................................................................6

Creating a Data File................................................................................................6

Defining Variables...................................................................................................6

Data Entry................................................................................................................8

Descriptive Statistics...............................................................................................9

Frequency Analysis.................................................................................................9

Crosstabs................................................................................................................11

Data Manipulation................................................................................................12

Select Cases............................................................................................................12

Splitting a File........................................................................................................14

Find and Replace...................................................................................................15

Reporting................................................................................................................16

Appendix................................................................................................................17

Introduction – Part 2.............................................................................................18

Downloading the Data Files..................................................................................18

Null Hypothesis......................................................................................................18

Statistical Tests......................................................................................................19

Tests of Significance..............................................................................................19

For additional SPSS help, visit http://www.youtube.com/mycsula

Correlations...........................................................................................................19

Paired-Samples T Test..........................................................................................20

Independent-Samples T Test................................................................................22

Multiple Response Sets.........................................................................................23

Multiple Response Frequencies............................................................................24

Multiple Response Crosstabs...............................................................................25

Data Manipulation................................................................................................27

Copying and Pasting Variable Properties...........................................................27

Inserting Variables and Cases..............................................................................29

Deleting Variables and Cases...............................................................................30

Merging Data Files................................................................................................30

Creating the Data File for Merging.....................................................................30

Inputting the Data in Variable View...................................................................30

Merging the Data Files..........................................................................................32

Appendix................................................................................................................35



Simple Regression..................................................................................................37

Scatter Plot.............................................................................................................37

Predicting Values of Dependent Variables.........................................................39

Predicting This Year’s Sales with Simple Regression Model............................41

Multiple Regression...............................................................................................43

Predicting Values of Dependent Variables.........................................................43

Predicting This Year’s Sales with Multiple Regression Model.........................45

Data Transformation............................................................................................46

Computing..............................................................................................................46

Polynomial Regression..........................................................................................47

PASW Statistics 17 (SPSS 17), Part 1 2

Regression Analysis...............................................................................................48

Analyzing the Results............................................................................................48

Chart Editing.........................................................................................................49

Adding a Line to the Scatter Plot.........................................................................49

Manipulating the Scales on X- and Y-axes.........................................................50

Adding a Title to the Chart..................................................................................52

Adding Colors to the Chart..................................................................................53

Filling a Background Color..................................................................................54



Chi-Square.............................................................................................................55

Chi-Square Test for Goodness-of-Fit..................................................................55

With Fixed Expected Values................................................................................55

With Fixed Expected Values and within a Contiguous Subset of Values........58

With Customized Expected Values......................................................................59

One-Way Analysis of Variance............................................................................60

Post Hoc Tests........................................................................................................63

Two-Way Analysis of Variance............................................................................65

Importing/Exporting Microsoft Excel and PowerPoint.....................................68

Using Scripting for Redundant Statistical Analyses..........................................71


Introduction – Part 1
PASW stands for Predictive Analytics Software. This program can be used to analyze data
collected from surveys, tests, observations, etc. It can perform a variety of data analyses and
presentation functions, including statistical analysis and graphical presentation of data. Among
its features are modules for statistical data analysis. These include 1) descriptive statistics, such
as frequencies, central tendency, plots, charts, and lists; and 2) sophisticated inferential and
multivariate statistical procedures, such as analysis of variance (ANOVA), factor analysis,
cluster analysis, and categorical data analysis. PASW Statistics is particularly well-suited for
survey research, though by no means is it limited to just this topic of exploration.

This handout (Descriptive Statistics) introduces basic skills necessary to run PASW Statistics. It
includes how to create a data file and run descriptive statistics. It is especially tailored to answer
three research questions formulated in the sample survey questionnaire, eventually giving users
an overview of how PASW Statistics can be used for survey research. The three research
questions formulated in the sample survey are as follows:
1. What kind of computer do people prefer to own?
2. What color do people prefer for their computer?
3. Is computer color preference different between genders?

Downloading the Data Files
This handout includes sample data files that can be used for hands-on practice. The data files are
stored in a self-extracting archive. The archive must be downloaded and executed in order to
extract the data files.
 The data files used with this handout are available for download at
http://www.calstatela.edu/its/training/datafiles/pasw17p1.exe.
 Instructions on how to download and extract the data files are available at
http://www.calstatela.edu/its/docs/download.php.

Starting PASW Statistics
The following steps are for starting PASW
Statistics 17 using the computers in the Open
Access Labs (OALs). The steps for starting
the program at home or on other computers
may be slightly different.

To start PASW Statistics 17:
1. Click the Start button, point to All
Programs, point to Course Work,
point to SPSS Inc, point to PASW
Statistics 17, and select PASW
Statistics 17. The PASW Statistics 17
dialog box opens (see Figure 1).
2. Click the Cancel button to create a
new data file.

Figure 1 - PASW Statistics 17 Dialog Box

The PASW Statistics Window
The Data Editor window opens with two view tabs: Data View and Variable View. The Data
View is used for data input, and the Variable View is used for adding variables and defining
variable properties (e.g., modifying attributes of variables). As displayed in Figure 2, the Data
Editor window includes several components. The Title bar displays the name of the current file
and the application. The Menu bar allows you to access various commands that are grouped
according to function. The Toolbar provides shortcuts to commonly used menu commands.

Figure 2 - PASW Statistics Data Editor Window

DATA VIEW
When PASW Statistics is launched, the Data Editor window opens in Data View, which looks
similar to a Microsoft Excel spreadsheet (which is just an array of rows and columns). The
difference is that the rows and columns in Data View are referred to as cases and variables,
respectively (see Table 1).
Table 1 - Elements in Data View
Element Description
Variable Each column represents a variable. Any survey questionnaire item or test
item can be a variable. Commonly defined variable types are numeric or
string. When defining variables as numeric, users need to specify decimal
places. Variable names can be up to 256 characters long and must start
with a letter. Make variable names meaningful and easily recognizable.
Case Each row represents a case. The participants in the study can be cases. For
example, if 100 participants are involved in your study, then 100 cases (or
rows) of information should be generated. Responses to the question items
should be entered consistently from left to right for each participant.


Element Description
Cell A cell is an intersection between cases and variables. Each response to a
survey question should be entered in a cell for each participant according
to the defined variable data types.

VARIABLE VIEW
Variable View is where variables are defined by assigning variable names and specifying the
attributes, such as data type (“String,” “Date,” “Numeric,” etc.), value labels, and measurement
scales (“Nominal,” “Ordinal,” or “Scale”). Users can think of Variable View as the backbone
structure for the Data View; data cannot be entered nor viewed without first defining variables in
Variable View (see Table 2).
Table 2 - Elements in Variable View
Element Description
Variable Name PASW Statistics will initially give a default variable name (var00001) that
users can change. It is recommended to assign a brief and meaningful
name to variables (e.g., “Name,” “Gender,” and “GPA”).
Variable Type The variable type determines how the cases are entered. Generally, text-
based characters are of “String” type and number-based characters are of
“Numeric” type. For example, if a user has a variable called “Name,”
then its variable type should be “String.” Similarly, a variable named
“GPA” should be a “Numeric” type with (normally two) decimal places.
Value Labels Value labels allow users to describe what the variable name stands for.
For example, if a variable has been defined as “Fav,” most likely others
may not know what it stands for. To avoid misinterpretation, value labels
can be utilized to clearly define variable names.

Creating a Data File
Creating a new PASW Statistics data file consists of two stages: (1) defining variables and (2)
entering the data. Defining the variables involves multiple processes and requires careful
planning. Once the variables have been defined, the data can then be added.

DEFINING VARIABLES
First, variable names based on your research questionnaire need to be assigned. If variable names
are not assigned, PASW Statistics will assign default names that may not be recognizable.
Second, the Type attribute should be specified for each variable. If necessary, assign labels to
values to help all users of the file understand the data better.

To define variables (example):
1. Click the Variable View tab at the lower left corner of the Data Editor window (see
Figure 3).
2. Type [Name] in the first cell under the Name column and press the [Enter] key.
3. Under the Type column, click the ellipses button . The Variable Type dialog box opens
(see Figure 4).
4. Select the String option.
5. Click the OK button.


Figure 3 - Variable View Tab

Figure 4 - Variable Type Dialog Box

6. Type [Gender] in row two under the Name column.
7. Activate the cell in row two under the Decimals column and change the entry to “0”
using the spin box.
8. Type [What is your gender?] in row two under the Label column.
9. Click the ellipses button in row two under the Values column. The Value Labels dialog
box opens (see Figure 5).
10. Type [1] in the Value: box.
11. Type [female] in the Label: box.
12. Click the Add button.
13. Repeat steps 10-12 using a value of [2] and a label of [male].

Figure 5 - Value Labels Dialog Box (Gender)

15. Type [GPA] in row three under the Name column and press the [Enter] key.
16. Type [Age] in row four under the Name column.
17. Click row four under the Decimals column and change the entry to “0” using the spin
box.
18. Type [What is your age?] in row four under the Label column.
19. In row four under the Values column, click the ellipses button. The Value Labels dialog
21. Type [19 or younger] in the Label: box.

23. Repeat steps 20-22 for values [2] through [5] and label them as shown in Table 3 (you
may also refer back to the sample questionnaire). See Figure 6 for the results.
Table 3 - Value Labels
Value Label
2 20-23
3 24-27
4 28-31
5 32 or over

Figure 6 - Value Labels Dialog Box (Age)

DATA ENTRY
After defining the variables, users can enter data for each case. If variables are defined as having
a “Numeric” data type, then numeric data should be entered. PASW Statistics will only accept
numeric digits (0-9) for a “Numeric” data type. If variables are defined as “String” data, any
keyboard character can be entered.
To enter data:
1. Click the Data View tab at the lower left corner of the Data Editor window (see Figure
7).
2. Click in a cell and type the corresponding data. The entry will also appear in the Cell
Editor (see Figure 8).

Cell Editor

Figure 8 - Data Entry
Figure 7 - Data View Tab


Descriptive Statistics
After data has been entered, users may begin analyzing the data by using descriptive statistics.
Descriptive statistics are the most commonly used statistics for summarizing data frequency or
measures of central tendency (mean, median, and mode).

Research Question # 1
What kind of computer do people prefer to own?

FREQUENCY ANALYSIS
We can use frequency analysis to answer the first research question. Frequency analysis is a
descriptive statistical method that shows the number of occurrences of each response chosen by
the respondents. When using frequency analysis, PASW Statistics can also calculate the mean,
median, and mode to help users analyze the results and draw conclusions. The following
example will use a frequency analysis to answer “Research Question # 1: What kind of computer
do people prefer to own?” using the data collected from our sample survey (see Appendix).

To perform frequency analysis:
1. Click the Open button on the Data Editor toolbar. The Open Data dialog box opens.
2. Locate and open the “Part 1.sav” file.
3. Click the Analyze menu, point to Descriptive Statistics, and select Frequencies… (see
Figure 9). The Frequencies dialog box opens (see Figure 10).
4. Select the variable(s) desired to be analyzed. In this case, select the variable “Computer
Owned” from the list box on the left.
5. Click the transfer arrow button . The selected variable is moved to the Variable(s): list
box.
6. Select the Display frequency tables check box if necessary.

Figure 9 - Frequency Analysis from Analyze Menu

Figure 10 - Frequencies Dialog Box

7. Click the Statistics… button. The Frequencies: Statistics dialog box opens (see ).
8. Select the Mean, Median, and Mode check boxes in the Central Tendency section; select
the Std. deviation check box in the Dispersion section.


Figure 11 - Frequencies: Statistics Dialog Box

9. Click the Continue button. This returns you to the Frequencies dialog box.
10. Click the OK button. An Output Viewer window opens and displays the statistics and
frequency table (see Figure 12). The columns of the table “Computer Owned” display the
“Frequency,” “Percent,” “Valid Percent,” and “Cumulative Percent” for each different
type of computer owned.

Figure 12 - Frequencies Output

The measures of central tendency (mean, median, and mode) can be used to summarize various
types of data. Mode can be used for nominal data, such as computer type, computer color,
ethnicity, etc. Mean or median can be used for interval/ratio data, such as test scores, age, etc.
The mean is also useful for data with a skewed distribution.

Answer to Research Question # 1
What kind of computer do people prefer to own?


Answer: IBM or Compatible
Explanation: Look at question # 7 in the Sample Survey. Notice that option # 3 is “IBM or
Compatible.” In the output “Statistics” table, the mode for “Computer Owned” is “3,” which is
“IBM or Compatible.” In addition, the frequency analysis results for “Computer Owned”
indicates that 49 out of 80 people own an “IBM or Compatible” computer. This can be
considered their preference.

What color do people prefer for their computer?

CROSSTABS
Crosstabs are used to examine the relationship between two variables. To answer the second
research question, users will need to analyze two variables: “Computer Owned” and “Color”
(which indicates color preference). Using crosstabs will show the intersection between these two
variables and reveal the computer type and color preferred by most people.

To perform a crosstabs analysis:
1. In Data View, click the Analyze menu, point to Descriptive Statistics, and select
Crosstabs… (see Figure 13). The Crosstabs dialog box opens.
2. Select the variable “Computer Owned” from the list box on the left.
3. Click the transfer arrow button to move it to the Row(s): list box.
4. Select the variable “color” (see Figure 14).
5. Click the transfer arrow button to move it to the Column(s): list box.
6. Click the OK button. An Output Viewer window opens and displays two tables: “Case
Processing Summary” and the “Crosstabulation” matrix (see Figure 15).

Figure 14 - Crosstabs Dialog Box

Figure 13 - Crosstab Analysis from Analyze Menu


Figure 15 - Crosstabs Output

What color do people prefer for their computer?

Answer: IBM or Compatible in beige color
Explanation: As shown in the “Crosstabulation” matrix above, “IBM or Compatible” is the
most preferred computer type from the row variable (“Computer Owned”). From the column
variable (“color”), “beige” is shown as the most preferred color. Therefore, you can conclude
that most people prefer “IBM or Compatible” computers that are in “beige” color.

Data Manipulation
Data files are not always ideally organized in a form to meet specific needs. For example, users
may wish to select a specific subject or split the data file into separate groups for analysis.

SELECT CASES
If you have two or more subject groups in your data and you want to analyze each subject in
isolation, you can use the select cases option. For example, the data we are currently analyzing
has both male and female participants. However, if you wish to analyze only female cases, then
you select “Gender” cases and set the condition for female cases only.

To select cases for analysis:
1. Click the Data menu and select Select Cases… (see Figure 16). The Select Cases dialog
2. Click the If condition is satisfied option.
3. Click the If… button. The Select Cases: If dialog box opens.
4. Select the variable “Gender” in the left list box.
5. Click the transfer arrow button to move it to the right text box.
6. Click the = button .
7. Click the 1 button .
8. Click the Continue button. This takes you back to the Select Cases dialog box.
9. Click the OK button. This takes you back to Data View. All males will be excluded from
the statistical analysis.
10. Rerun the crosstabs analysis by following steps 1-6 of the Crosstabs section of this
handout.
11. Click the OK button. The Output Viewer window updates (see Figure 18).


Figure 17 - Select Cases Dialog Box
Figure 16 - Select Cases from Data Menu

From the cross tabulation in the Output Viewer window in below, look at the column for the
most preferred color and the row for the computer types. Since we selected only female cases,
what is the computer color most preferred by women? Ten women chose “IBM or Compatible”
with color option “5.” Thus, you may conclude that most female participants prefer the color “5”
for “IBM or Compatible” computers. However, what does “5” represent? This problem arose by
not labeling the variable value “5” as “Other.” Moreover, even if it were labeled “Other,” it does
not indicate any particular color, making it difficult to draw a conclusion. In order to avoid such
problems, it is suggested that you provide a blank space where participants can specify “Other”
color preferences besides the ones specified in the survey questionnaire.

Figure 18 - Select Cases Output

Example:
What kind of color do you like to have for your computer?
1. Beige 2.Black 3.Gray 4.White 5.Other __________


Is computer color preference different between genders?

SPLITTING A FILE
To answer the third research question, we need to split the file. You can analyze one particular
group of subjects using the select cases option. However, if you wish to compare the response or
performance differences by groups within one variable, it is best to use the split files option.

To split a file for analysis:
1. Turn off the select cases option.
2. Click the Data menu and select Select Cases…. The Select Cases dialog box opens.
3. Select the All cases option.
4. Click the OK button. Notice that the male cases that were excluded are now all included
in the data file.
5. Select the Data menu and select Split File…. (see Figure 19). The Split File dialog box
opens (see Figure 20).

Figure 20 - Split File Dialog Box

Figure 19 - Split File from Data Menu
6. Select the variable “Gender” from the left list box.
7. Select the Compare groups option.
8. Click the transfer arrow button to move the variable “Gender” to the Groups Based
on: list box.
10. Rerun the crosstabs analysis by following steps 1-6 of the Crosstabs section of this
handout.
11. Click the OK button. The Output Viewer window crosstabulation table opens (see
Figure 21).


Figure 21 - Split File Output Data

Is computer color preference different between genders?

Answer: Yes
Explanation: There is a computer color preference difference based on gender. From the
crosstabulation output, females prefer “IBM or Compatible” of “Other” color over the colors
beige, black, gray, or white. The male group prefers “IBM or Compatible” of “black” color.

FIND AND REPLACE
In PASW Statistics, the Find and Replace function is more efficient to use. Users can use Find
and Replace in Data View. However, only the Find function is available for users in Variable
View.

To use the Find and Replace function:
1. Click the Edit menu and select Find…. The Find and Replace dialog box opens (see
Figure 22).
2. In the Find: box, type [Clinton].
3. Select the Replace check box to replace ‘Clinton’ with another word.
4. Click in the Replace with: box, and type the name [Cliff].
5. Click the Show Options button.
6. Under Match to, select the Entire cell option.
7. Click the Replace All button.

Figure 22 - Find and Replace Dialog Box (Data View)


NOTE: Under the Match to section of the Find and Replace dialog box (see Figure 22), Contains
means PASW Statistics will find each instance of the word/phrase/number appearing in a cell,
whether or not it is the only information enclosed. The Entire cell option will find the
word/phrase/number that matches the entire cell as a whole. Selecting the Begins with and Ends
with options will search the character indicated by the user.

Reporting
Once the statistical analysis is complete, the final step is to create a report. In the report, you may
include PASW Statistics output (e.g., graphs and tables) for supporting your analysis. Using the
Copy and Paste functions, the tables/graphs generated in PASW Statistics can be copied from the
Output Viewer window and pasted into a Microsoft Word document without having to create
new tables or graphs.

To create a report using Microsoft Word:
1. In the Output Viewer window, right-click a table. A box appears around the table and a
red arrow to the left of the table (which means it is selected).
2. Select Copy from the shortcut menu.
3. Open Microsoft Word.
4. Right-click in the Word document and select Paste from the shortcut menu. The table is
copied into the Word document.


Appendix
SAMPLE SURVEY

Research Questions

1. What kind of computer do people prefer to own?
2. What color do people prefer for their computer?
3. Is computer color preference different between genders?

Survey Questions
1. What is your name? _____________________________

2. What is your gender? ____________________________

3. What is your G.P.A.? ____________________________

4. What is your age?

1. 19 or younger 2. 20-23 3. 24-27 4. 28-31 5. 32 or over

5. How much do you make in a month?

1. Less than $1000 2. $1000–$1499 3. $1500–$1999 4. $2000–$2499 5. Over $2500

6. What is your class standing?

1. Freshman 2. Sophomore 3. Junior 4. Senior 5. Graduate

7. What kind of computer do you own?

1. Toshiba 2. Apple 3. IBM or Compatible 4. Other 5. None

8. What kind of computer have you used?

1. IBM or Compatible 2. Apple 3. Toshiba 4. Other 5. None

9. What color do you like to have for your computer?

1. Beige 2. Black 3. Gray 4. White 5. Other

For additional SPSS help, visit http://www.youtube.com/mycsula.


This handout (Test of Significance) introduces 1) several data entry and data manipulation
techniques that help you save time, 2) basic skills to perform tests of significance, such as
correlations and t tests, and 3) an introduction to multiple response sets. The step-by-step
instructions will help you understand how to interpret the output of your tests from data supplied
by your research question(s). Follow the steps carefully to get appropriate results. Please note
that a slightly different process might yield unexpected and complicated results. This is a
continuation of the PASW Statistics Descriptive Statistics handout.


Null Hypothesis
The null hypothesis (H0) represents a theory that has been presented, either because it is believed
to be true or because it is to be used as a basis for an argument. It is a statement that has not been
proven. It is also important to realize that the null hypothesis is the statement of no difference.
For example, in a clinical trial of a new drug, the null hypothesis might be that the new drug is
no better, on average, than the current drug (in other words, the new drug exhibits the same
behavior as the old drug). The null hypothesis (H0) and the alternative hypothesis (H1) can be
stated as:

H0: There is no difference between the two drugs.
H1: There is a significant difference between the two drugs.

Special consideration is given to the null hypothesis. This is due to the fact that the null
hypothesis relates to the statement being tested, whereas the alternative hypothesis relates to the
statement to be accepted if and when the null is rejected.

The final conclusion, once the test has been carried out, is always given in terms of the null
hypothesis. The result is either "Reject H0 in favor of H1" or "Do not reject H0"; the conclusion is
never "Reject H1" or "Accept H1."


If the conclusion is "Do not reject H0," this does not necessarily mean that the null hypothesis is
true. It only suggests that there is no sufficient evidence against H0 in favor of H1. Rejecting the
null hypothesis then suggests that the alternative hypothesis may be true.

NOTE: The null hypothesis essentially states that the given cases or items under consideration are
statistically the same or exhibit the same behavior without any significant difference. The alternate
hypothesis states that the given cases exhibit different behavior or that they have a statistically significant
difference.

Statistical Tests
Statistics is a set of mathematical techniques used to summarize research data and determine
whether the data supports a proposed hypothesis. PASW Statistics includes tools that can be used
to analyze variables and determine the strength and nature of the relationship between two
variables and whether the means (averages) of two data sets (samples) are statistically the same
or different.

Tests of Significance
The following examples are sample research questions that can be answered using PASW
Statistics analytical methods.

CORRELATIONS
A correlation is a statistical device that measures strength or degree of a supposed linear
association between two or more variables. One of the more common measures used is the
Pearson correlation, which estimates a relationship between two interval variables.

Is there a relationship between academic performance and Internet access?

H0: There is no difference between academic performance and Internet access.
H1: There is a significant difference between academic performance and Internet access.

To run a correlation analysis:
1. Locate and open the “Part 2.sav” file.
2. Click the Analyze menu, point to Correlate, and select Bivariate…. The Bivariate
Correlations dialog box opens (see Figure 23).
3. Select the variables “active,” “posttest,” and “gpa” in the list box on the left.
4. Click the transfer arrow button to move them to the Variables: list box.
5. Select the Pearson check box and the Two-tailed option if necessary.
6. Click the OK button. The Output Viewer window opens with a “Correlations” table
(see Figure 24).


Figure 23 - Bivariate Correlations Dialog Box

Figure 24 - Bivariate Correlations Output Table

The Answer to Research Question # 1
Figure 9 - Bivariate Correlations Output Table
Is there a relationship between academic performance and Internet access?

Answer: Yes
Explanation: As shown in Figure 24 above, the correlation index for the relationship between “active”
and “posttest” is 0.476, which is between 0.4-0.7. The correlation index for the relationship between
“active” and “gpa” is 0.448, which is between 0.4-0.7. The results from these analyses indicate that
there is a moderate, positive relationship between academic performance and Internet access.

PAIRED-SAMPLES T TEST
A Paired-Samples T Test is used to test if an observed difference between two means is
statistically significant. To run a t test, the following assumptions should be met: the data 1) has
normal distribution, 2) is a large data set, and 3) has no outliers. If any of these assumptions are
not met, then a nonparametric test should be used.


Is there an instructional effect taking place in the computer class?

H0: There is no influence of using the Internet on academic achievement for this class.
H1: There is an influence of using the Internet on academic achievement for this class.

The hypothesis is that Internet familiarity cannot influence the academic achievement in the
computer class. The variables that reflect academic achievement are “pretest” and “posttest.”

To run a Paired-Samples T Test:
1. Click the Analyze menu, point to Compare Means, and select Paired-Samples T
Test…. The Paired-Samples T Test dialog box opens (see Figure 25).
2. Select the variables “pretest” and “posttest” in the list box on the left.
3. Click the transfer arrow button to move them to the Paired Variables: list box.
4. Click the OK button. The Output Viewer window opens (see Figure 26).

Figure 25 - Paired-Samples T Test Dialog Box

Is there an instructional effect taking place in the computer class?

Figure 26 - Paired-Samples T Test Output Table

Answer: Yes
Explanation: The observed mean difference is -4.5172. Since the value of t is -3.820 at p < .001,
the mean difference (-4.5172) between “pretest” and “posttest” is statistically significant.
According to the Sig. of 0.001 (which is less than 0.05), the hypothesis is rejected. Therefore, it
can be inferred that there was instructional effect taking place in the computer class.


INDEPENDENT-SAMPLES T TEST
An Independent-Samples T Test is used to determine the likelihood that two independent data
samples came from populations that have identical means. If this were true, then the difference
between the means should be equal to zero. The null hypothesis in this case would be that the
two means are equal.

Two variables are required in the data set. One variable is the measured parameter. Examples
include weight, height, or frequency. The second variable divides the data set into two groups.
Light and Dark are the groups whose means will be compared.

Is there a difference in the average number of seedlings grown in the light
and those grown in the dark?

In this example, 20 Petri dishes each contained 10 celery seeds. Ten of the dishes were kept in
the dark for one week; the other 10 were placed under a grow light for the same amount of time.
At the end of the week, the number of seeds that sprouted was counted in each dish.

H0: Variance (light) = variance (dark).
H1: Variance (light) ≠ variance (dark).

H0: There is no difference between seedlings under the light and in the dark ( (light) = = (dark)).

H1: There is sig. difference between seedlings under the light and in the dark ( (light) ≠ (dark)).

NOTE: The first set of hypotheses is testing the variance, while the proceeding set is testing for the mean.
The variances have to be equal before we can determine if the means are equal.

NOTE: Variance: The arithmetic mean of the squared deviations from the mean, which is essentially used
to see how far the single samples are from the mean. We need to make sure the variances are equal before
we can determine if the means are equal. If the variances are equal, users will be able to move to the T
Test. If the variances are not equal, users will have to do more testing.

To run the Independent-Samples T Test:
1. Locate and open the “Seedlings.sav” file.
2. In Data View, click the Analyze menu, point to Compare Means, and select
Independent-Samples T Test…. The Independent-Samples T Test dialog box opens (see
Figure 27).
3. Select the “Seedlings” variable in the list box on the left.
4. Click the transfer arrow button to move the variable to the Test Variable(s): list box.
5. Select the “Treatment” variable in the list box on the left.
6. Click the transfer arrow button to move the variable to the Grouping Variable: list box.
7. Click the Define Groups… button. The Define Groups dialog box opens (see Figure 28).
8. Enter [0] in the Group 1: box, enter [1] in the Group 2: box, and then click the Continue
button.
9. Click the OK button. The Output Viewer window opens with several tables, including
an Independent-Samples Test table (see Figure 29).


Figure 27 - Independent-Samples T Test Dialog Box Figure 28 - Define Groups Dialog Box

Is there a difference in the average number of seedlings grown in the light
and those grown in the dark?

Figure 29 - Independent-Samples T Test Output

Answer: Yes
Explanation: The mean difference in seedlings sprouted between the two treatments (light and
dark) was -2.900. The value of t, which is -3.179, was statistically significant (p=0.005).
Therefore, the null hypothesis is rejected.

Multiple Response Sets
Very often, a survey will contain questions where the respondent is allowed to select more than
one answer. Managing such questions in PASW Statistics can produce some difficulty. Each
response in a multiple response question should be coded as a separate variable and then grouped
under a multiple response set of variables. The multiple response set can then be analyzed using
frequency counts or crosstabs.

To define a multiple response set of variables:
1. Locate and open the “Airlines.sav” file.
2. In Data View, click the Analyze menu, point to Multiple Response, and select Define
Variable Sets… (see Figure 30). The Define Multiple Response Sets dialog box opens
(see Figure 31).


Figure 31 - Define Multiple Response Sets Dialog Box

Figure 30 - Define Variable Sets from Analyze
Menu

3. Select the “American,” “TWA,” “United,” “USAir,” and “Other” airline variables and
move them to the Variables in Set: list box.
4. Make sure the Dichotomies option is selected and enter [1] in the Counted value: box.
5. Type [Airlines] in the Name: box.
6. Type [Airline frequency of response] in the Label: box.
7. Click the Add button. The set is created as “$Airlines” and listed in the Multiple
Response Sets: list box.
8. Click the Close button.

MULTIPLE RESPONSE FREQUENCIES
It is possible to obtain the answer by running a frequency analysis for each of the airline
variables. The result of such an analysis will only provide an overall raw frequency for each
response and will not allow percentage comparisons between the different airlines. A frequency
analysis that uses a multiple response set will provide an appropriate response with concise
output.

In a survey of airline passengers, which airline was selected as having been
flown most often in the previous six months?

To analyze the frequency of response for each variable in a multiple response set:
1. Click the Analyze menu, point to Multiple Response, and select Frequencies…. The
Multiple Response Frequencies dialog box opens (see Figure 32).
2. Select the multiple response set labeled “$Airlines” and move it to the Table(s) for: list
box.
3. Click the OK button. An Output Viewer window opens with the frequency analysis (see
Figure 33).


Figure 32 - Multiple Response Frequencies Dialog Box

In a survey of airline passengers, which airline was selected as having been
flown most often in the previous six months?

Figure 33 - Airline Frequency Analysis Output

Answer: United
Explanation: As seen in the Output Viewer window, there were 18 people surveyed and 44 total
responses generated. Of the 44 total responses, United was selected most often with 12 responses
(representing 27.3% – the largest portion of the total responses).

MULTIPLE RESPONSE CROSSTABS
Without the use of a multiple response set, each airline would have to be analyzed against the
variable that the passengers used to identify themselves as being afraid of flying. This would
require the use of a crosstab analysis. However, the overall results would not allow for easy
comparison between each of the airlines. The best way to answer the question would be to
include the multiple response set into a crosstab analysis.

In a survey of airline passengers, which airline was selected most often by
those passengers who identified themselves as afraid to fly?


To incorporate a multiple response set into a crosstab analysis:
1. Click the Analyze menu, point to Multiple Response, and select Crosstabs…. The
Multiple Response Crosstabs dialog box opens (see Figure 34).

Figure 34 - Multiple Response Crosstabs Dialog Box

2. Select the “FearFactor” variable as the Row(s): variable and the “$Airlines” multiple
response set as the Column(s): variable.
3. Select the “FearFactor” variable after it is designated as the Row(s): variable. The
Define Ranges… button becomes active.
4. Click the Define Ranges… button. The Multiple Response Crosstabs: Define Variable
Ranges dialog box opens (see Figure 35).

Figure 35 - Multiple Response Crosstabs: Define Variable Ranges Dialog Box

5. Enter [0] in the Minimum: box and [1] in the Maximum: box for the “FearFactor”
variable.
6. Click the Continue button.
7. Click the Options… button. The Multiple Response Crosstabs: Options dialog box opens
(see Figure 36).
8. Select the Cases option and then click the Continue button.
9. Click the OK button. The Output Viewer window opens with the crosstab results (see
Figure 37).


Figure 36 - Multiple Response Crosstabs: Options Dialog Box

In a survey of airline passengers, which airline was selected most often by
those passengers who identified themselves as afraid to fly?

Figure 37 - Multiple Response Crosstabs Output

Answer: USAir
Explanation: Of the 18 people surveyed, ten identified themselves as being afraid to fly. Within
that group of survey respondents, USAir was the airline selected most often (seven times).

Data Manipulation
PASW Statistics also provides tools to make data manipulation a simple task.

COPYING AND PASTING VARIABLE PROPERTIES
Copying and pasting is very useful when the same properties need to be given to different
variables.

To copy and paste variable properties:
1. Click the File menu, point to New, and select Data.
2. Click the Variable View tab at the lower left corner of the Data Editor window (see
Figure 38).



3. Type [active] in the first cell under the Name column and press the [Enter] key.
4. Click in the first cell under the Decimals column and decrease the entry to “0.”
5. Click in the first cell under the Values column and click the Ellipses button . The
Value Labels dialog box opens (see Figure 39).
7. Type [Strongly Disagree] in the Label: box.
9. Assign [2], [3], and [4] for [Disagree], [Agree], and [Strongly Agree], respectively, by
repeating steps 6-8 for each value added (see Figure 39).

Figure 39 - Value Labels Dialog Box

11. Switch back to Data View (see Figure 40).
12. Click the “active” variable heading to highlight the column.
13. Click the Edit menu and select Copy to copy the properties of the variable “active.”
14. Highlight the number of variables needed to apply the same properties to by clicking on
the header of the first variable and dragging the pointer across to the last header (see
Figure 41 and Figure 42).
15. Click the Edit menu and select Paste. The copied properties of the variable “active” will
be applied to the target variables, and the Data View and Variable View will change (see
Figure 43 and Figure 44).

Figure 41 - Selected Variable

Figure 40 - Data View Tab


Figure 43 - Data View Showing New Variables
Figure 42 - Selecting Target Variables

Figure 44 - Variable View Showing New Variables

INSERTING VARIABLES AND CASES
By using Insert Variable and Insert Cases, variables and cases can be added into any location
of the data file in a simple, straightforward manner. Assume that one wants to insert a new
variable named “midterm” between “pretest” and “posttest” and use it for test score data. The
following instructions describe how to insert a new variable and make it available for “Numeric”
data type.

To insert a variable:
1. Switch to Data View.
2. Click the “posttest” variable heading to highlight the column.
3. Click the Edit menu and select Insert Variable. A new variable is inserted to the left of
the highlighted variable (“posttest”).
NOTE: The new variable is created with a default name “VAR00001” which can be changed
later.
4. To define the properties of the new variable, double-click the variable heading. The
Variable View is activated for the new variable.
5. Type [midterm] in the Name column of the new variable.
6. Change the variable type if desired.

In the same manner, it is possible to insert cases in a particular location in Data View. For
instance, assume that a case should be inserted between case “10” and “11” for a particular
student’s record. By following the instructions below, one case will be inserted after the 10th
case.

To insert cases (example):
1. Switch to Data View.
2. Click row number “11” to highlight the case.
3. Click the Edit menu and select Insert Cases. A new case is inserted above case “11.”


DELETING VARIABLES AND CASES
Variables and cases can be deleted by using the Delete command.

To delete a variable or case:
1. In Data View, click the variable heading or the case number to highlight what will be
deleted.
2. Click the Edit menu and select Clear. The variable or case is deleted.

Merging Data Files
The merging data files function is useful for users who store each of their topics in separate files
and eventually need or want to combine them together. This allows users to import data from one
file into another as long as both sets of data (from each file) contain a common identifier for each
of the cases that the user wishes to combine.

An identifier has no meaning other than to distinguish each case from one another, and to
identify the correlating cases from the additional data files. This identifier can be a unique value,
number, or letter combination to be applied to each case.

NOTE: The variables do not have to be the same across data files.

CREATING THE DATA FILE FOR MERGING
Scenario: A psychological focus group on campus needs to create a file for a longitudinal study
for ten students on campus. Each file will have the same students, but four different focal points
of study pertaining to each question. Over the five year span of the study, the ten students will be
asked twelve questions each year (one a month), and the same questions will be asked each year.
At the end of the year, the three files will be combined in an annual questionnaire file to be
properly analyzed.

The merging data files function can be used to satisfy this requirement.

Inputting the Data in Variable View
Files must be created first before being merged.

To create a data file for merging:
1. Click the File menu, point to New, and select Data.
2. Once the new file has been created, select the Variable View tab.
3. For the first variable, name it [ID] to be your identifier variable, and press the [Enter]
key.
4. Change the Type attribute by clicking the ellipses button and selecting the String option
from the Variable Type dialog box.
5. Change the width to [10] and click the OK button.
6. Click in the second variable cell, type [January], and press the [Enter] key.
7. Change the Type attribute to String.
8. In the Label attribute, type [What pet would you like to own?] (see Figure 45).
9. Repeat steps 6 through 8 to enter the data in Table 4.

For additional SPSS help, visit http://www.youtube.com/mycsula.

Figure 45 - Define Variables in Variable View

Table 4 - Variables for Case Study
Month Attribute Type Length Label Attribute
February String 10 What is your favorite shape?
March String 12 It is 1:30pm, what are you eating?
April String 12 What is your preferred beverage?

10. Once this information has been defined in Variable View, switch by clicking the Data
View tab to enter the corresponding case information.
11. Enter [Alfred] in case 1 of the ID variable, [Bethel] in case 2 of the ID variable, down to
[Jessie] in case 10 of the ID variable. Enter the corresponding information according to
Table 5. See Figure 46 for the results.
Table 5 - Input Case Information
Case ID January February March April
1 Alfred Dog Star Pizza Water
2 Bethel Cat Square Fruit Soda Pop
3 Chris Cat Triangle Veggies Grape Juice
4 Dante Dog Rectangle Sandwich Orange Juice
5 Erica Tiger Oval Chips Aloe Water
6 Fernando Tarantula Circle Calzon Beer
7 Grenadine Dog Octagon Salad White Wine
8 Harold Bees Polygon Soup Naked Juices
9 Isadora Turtle Rhombus PandaExpress V8 Juice
10 Jessie Hamster Oval Egg Salad Lemonade


Figure 46 - Input Case Information

12. Save the file by clicking the File menu and selecting Save. The Save Data As dialog box
opens.
13. Select the Desktop as the destination and type [Merge 1] in the File name: text box.
14. Click the Save button.
15. Close the Output Viewer window.

MERGING THE DATA FILES
To merge data files, all files must have a common variable. The common variable in this case is
ID.

To merge data files: (First, make sure the files have the same IDs.)
1. Open the files “Merge 2” and “Merge 3” and check for consistency across all of the IDs.
2. Minimize the “Merge 2” and “Merge 3” data files.
3. Once back in the “Merge 1” file, click the Data menu, point to Merge Files, and select
Add Variables… (see Figure 47).

Figure 47 - Data Menu When Selecting Add Variables


4. The Add Variables to Merge 1.sav dialog box opens. Select the An external PASW
Statistics data file option and click the Browse… button (see Figure 48).

Figure 48 - Add Variables to Merge 1.sav Dialog Box

5. Locate and select the “Merge 2” data file and click the Open button.
6. Click the Continue button. The Add Variables from Merge 2.sav dialog box opens (see
Figure 49).
7. Select the Match cases on key variables in sorted files check box.
8. From the Excluded Variables: list box, select “ID>(+)” (see Figure 49), and using the
transfer arrow button , move it to the Key Variables: box.

Figure 49 - Add Variable from Merge 2.sav Dialog Box

9. Click the OK button. A warning message dialog box opens (see Figure 50).


Figure 50 - Sorting Warning Dialog Box

10. Click the OK button to close the warning message. The finished product should look like
Figure 51.

Figure 51 - Merged 1 and 2 Files

11. Repeat steps 3-10 for the “Merge 3” file.


Appendix
QUESTIONNAIRE
This survey is designed to investigate relationships between Internet access and academic
success. It consists of three parts: questions related to the background information of the
respondent, questions about Internet use patterns, and several open-ended questions. Please
select appropriate answers that best describe your activities on the Internet as truthfully as
possible. The results of this study will be used anonymously for the PASW Statistics Part 2: Test
of Significance workshop.

Background Information
1. Age: _____________________________

2. Major: ____________________________

3. G.P.A.: ___________________________

4. Monthly Income: ___________________

Internet Access
5. Do you have a computer at home?

1. Yes 2. No

6. Where do you surf on the Internet? (You can circle more than one option for this question.)

1. At school 2. At home 3. At work 4. Other ____________

7. How long do you stay online per day?

1. Less than 30 minutes 2. 1-2 hours 3. More than two hours

Questions 8 through 19 are designed to investigate the frequency and types of activities on
the Internet. These questions have a 4 point Likert-scale ranging from strongly disagree to
strongly agree. Please circle the option that best describes your activities on the Internet.

SD: Strongly Disagree
D: Disagree
A: Agree
SA: Strongly Agree
SD D A SA
8. I am a very active Internet surfer. 1 2 3 4

9. I surf the Internet to look for articles for research
papers. 1 2 3 4


SD D A SA
10. I surf the Internet to read current news. 1 2 3 4

11. I use the Internet only to e-mail my friends,
family, and professors. 1 2 3 4

12. I surf the Internet to check movie schedules. 1 2 3 4

13. I surf the Internet to look for personal
information (e.g., yellow pages). 1 2 3 4

14. I surf the Internet to look for job openings 1 2 3 4

15. I use the Internet to play games. 1 2 3 4

16. I use the Internet to download forms and files
(e.g., income tax forms). 1 2 3 4

17. I surf the Internet to improve my computer skills. 1 2 3 4

18. I surf the Internet to purchase books. 1 2 3 4

19. I surf the Internet to purchase other merchandise
(e.g., video tapes, clothes, computers). 1 2 3 4

Question 20 is an open-ended question.

20. Are there any other Internet activities that are not included in this survey? If so, please
describe them below.

____________________________________________________________________

____________________________________________________________________

____________________________________________________________________

____________________________________________________________________



This handout (Regression Analysis) provides basic instructions on how to answer research
questions and test hypotheses through the use of linear regression (a technique which examines
the relationship between a dependent variable and a set of independent variables). The value of
the dependent variable (e.g., salesperson’s total annual sales) can be predicted based on its
relationship to the independent variables used in the analysis (e.g., age, education, and years of
experience). The two research questions proposed for this workshop are as follows:
1. How much will each salesperson make this year?
2. Who will qualify for a $1,000 bonus?


Simple Regression
Simple regression estimates how the value of one dependent variable (Y) can be predicted based
on the value of one independent variable (X). The linear equation for simple regression is as
follows:
Y = aX + b

Simple regression can answer the following research question:

How much will each salesperson make this year?

SCATTER PLOT
A scatter plot displays the nature of the relationship between two variables. It is recommended to
run a scatter plot before performing a regression analysis to determine if there is a linear
relationship between the variables. If there is no linear relationship (i.e., points on a graph are
not clustered in a straight line), there is no need to run a simple regression.


To run a scatter plot:
1. Start PASW Statistics 17.
3. Locate and open the “Regression.sav” file.
4. Click the Graphs menu, point to Legacy Dialogs, and select Scatter/Dot… (see ). The
Scatter/Dot dialog box opens (see ).
NOTE: To estimate the relationship between two variables, select the Simple Scatter plot.

Figure 53 - Scatter/Dot Dialog Box

Figure 52 - Graphs Menu When Selecting
Scatter/Dot

5. If necessary, select the Simple Scatter option, and then click the Define button (see ). The
Simple Scatterplot dialog box opens (see ).

Figure 54 - Simple Scatterplot Dialog Box

6. Select the variable “Last year sales [lastsale]” from the list box on the left.
7. Click the first transfer arrow button to move the variable to the Y Axis: box.

8. Select the variable “Years of experience [yearexpe]” from the list box on the left.
9. Click the second transfer arrow button to move the variable in the X Axis: box.
10. Click the OK button. The Output Viewer window opens with a scatter plot of the
variables (see Figure 55).
NOTE: A graph similar to Figure 55 will be displayed in the Output Viewer window. This scatter
plot indicates that there is a linear relationship between the variables “Last year sales” and “Years
of experience.”
The next step is to find a line that best accommodates the pattern of points in this scatter plot.
The steps on how to enhance graph appearance are included in the last section of this handout.

Figure 55 - Scatter Plot

PREDICTING VALUES OF DEPENDENT VARIABLES
Since it is known that a linear relationship exists between the two variables, the regression
analysis can be performed to predict this year’s sales.

To run a simple regression analysis:
1. Switch to the Data Editor window.
2. Click the Analyze menu, point to Regression, and select Linear… (see Figure 56). The
Linear Regression dialog box opens.

Figure 56 - Analyze Menu When Selecting Linear


3. Select the variable “Last year sales [lastsale]” from the variable list box on the left and
move it to the Dependent: box by clicking the first transfer arrow button (see Figure 57).

Figure 57 - Linear Regression Dialog Box

4. Select the variable “Years of experience [yearexpe]” from the variable list box on the
left and move it to the Independent(s): box by clicking the second transfer arrow button.

The following tables present the results of a simple regression. “R Square” (.918) indicates that
this model accounts for almost 92% of the total variation in the data (see Figure 58).

Figure 58 - Model Summary Output


Figure 59 - Coefficients Output

The slope and the y-intercept as seen in Figure 59 should be substituted in the following linear
equation to predict this year’s sales: Y = aX + b. In this case, the values of a, b, x, and y will be
as follows:
a = 1954.658
b = 440.987
X = Years of experience (values of independent variable)
Y = Last year sales (values of dependent variable)

PREDICTING THIS YEAR’S SALES WITH SIMPLE REGRESSION MODEL
To predict this year’s sales for each salesman, the values of a and b should be substituted in the
following linear equation:
Y = aX + b
Last year sales = (a * yearexpe) + b
This year sales = (1954.658 * yearexp2) + 440.987
a = 1954.658
b = 440.987
X = Years of experience [yearexp2]
Y = This year sales

NOTE: The new independent variable, “yearexp2” is used instead of “yearexpe” in order to predict
this year’s sales.

To predict this year’s sales using the computing function:
Click the Transform menu and select Compute Variable…. The Compute Variable dialog
2. In the Target Variable: box, type [Simple].


Figure 60 - Compute Variable Dialog Box

3. In the Numeric Expression: box, enter the following equation by typing or selecting
from the dialog box keypad:
[1954.658 * yearexp2 + 440.987]
NOTE: It is recommended to select the variable “yearexp2” directly from the variable list box
on the left of the Compute Variable dialog box to prevent typing mistakes.
4. Click the OK button. The results will be displayed in the Simple column in Data View
(see Figure 61).

Figure 61 - Simple Regression Results

To change the data type for the new variable “Simple”:
1. Click the Variable View tab at the lower left corner of the Data Editor window (see ).


2. Locate the variable “Simple” and click the Ellipses button under the Type column.
The Variable Type dialog box opens (see ).
3. Select the Dollar option, and then select the $###,###,### format (12 digits width with 0
decimal places).

Figure 63 - Variable Type Dialog Box

4. Click the OK button, and then click the Data View tab.

Figure 64 - Simple Regression Prediction

NOTE: The prediction of this year’s sales for each salesperson are computed under the new
variable named “Simple” as shown in .

Multiple Regression
Multiple regression estimates the coefficients of the linear equation when there is more than one
independent variable that best predicts the value of the dependent variable. For example, it is
possible to predict a salesperson’s total annual sales (the dependent variable) based on
independent variables such as age, education, and years of experience. The linear equation for
multiple regression is as follows:
Z = aX + bY + c

PREDICTING VALUES OF DEPENDENT VARIABLES
The previous section demonstrated how to predict this year’s sales (the dependent variable)
based on one independent variable (number of years of experience) by using simple regression
analysis. Similarly, this year’s sales (the dependent variable) can be predicted from more than
one independent variable, such as “Years of experience” and “Years of education,” by using
multiple regression analysis.


To run multiple regression analysis:
1. Click the Analyze menu, point to Regression, and select Linear…. The Linear
Regression dialog box opens (see Figure 65).
2. From the variable list box, select “Last year sales [lastsale]” as a dependent variable and
move it to the Dependent: box by clicking the first transfer arrow button .
3. From the variable list box, select “Years of experience [yearexpe]” and “Years of
education [educatio]” and move them to the Independent(s): box by clicking the second
transfer arrow button .
NOTE: If there are variables in the Independent(s): or Dependent: boxes, click the Reset button
before performing steps 2 and 3 above.

Figure 65 - Linear Regression Dialog Box

NOTE: The table should look similar to . “R
Square” = “.976” indicates that this model can
predict this year’s sales almost 98% correctly.

Figure 66 - Model Summary Output for Multiple
Regression

Figure 67 - Multiple Regression Output

The slopes and the y-intercept as seen in Figure 67 should be substituted in the following linear
equation to predict this year’s sales: Z = aX+ bY + c


In this case, the values of a, b, x, and y will be as follows:
a = 1874.5
b = 609.391
c = (-8510.838)
X = Years of experience (independent variable)
Y = Years of education (independent variable)
Z = This year sales (dependent variable)

As indicated in the output table, the coefficient for “Years of experience” is “1874.5”and the
coefficient for “Years of education” is “609.391.”
PREDICTING THIS YEAR’S SALES WITH MULTIPLE REGRESSION MODEL
To predict this year’s sales for each salesman, the values of a, b, and c should be substituted in
the following linear equation: Z = aX + bY + c

This year sales = 1874.5 * Years of experience + 609.391 * Years of education + (-8510.838)

To predict this year’s sales by multiple regression analysis:
2. Click the Transform menu and select Compute Variable…. The Compute Variable
dialog box opens (see Figure 68).
3. Click the Reset button.
4. In the Target Variable: box, type [multiple].
5. In the Numeric Expression: box, enter the following equation by typing or selecting
from the dialog box keypad:
[1874.5 * yearexp2 + 609.391 * educatio - 8510.838]


6. Click the OK button. The results will be displayed in the multiple column in Data View
(see ).


Figure 69 - Multiple Regression Results

NOTE: The predictions of sales for each salesperson using two independent variables are listed under the
new variable named “multiple.”

Data Transformation
Situations may arise where data transformation is useful. Most data transformations can be done
with the Compute… command. Using this command, the data file can be manipulated to fit
various statistical performances.
Who will earn a $1,000 bonus?

COMPUTING
Since each person’s yearly sales were already predicted, those who made more than $2,000
above the predicted values, obtained via multiple regression analysis, will receive $1,000 as a
bonus. Using the Compute… command, those salespeople who met the criteria can be easily
located by comparing the values of this year’s actual sales with the predictions from multiple
regression analysis computed in the previous lesson.

The first step in predicting who will receive a bonus is to calculate the difference between this
year’s actual sales and the prediction of this year’s sales from the multiple regression analysis.

To predict who will qualify for the bonus:
1. Open the “Bonus.sav” file.
2. If the Save As dialog box opens, click the No button.
3. Click the Transform menu and select Compute Variable…. The Compute Variable
dialog box opens (see ).
4. In the Target Variable: box, type [bonus].
5. In the Numeric Expression: box, type [1000].



6. Click the If… button. The Compute Variable: If Cases dialog box opens (see Figure 71).
7. Select the Include if case satisfies condition: option.
8. Enter the following expression by typing or selecting from the dialog box keypad:
[thissale - multiple >= 2000]

Figure 71 - Compute Variable: If Cases Dialog Box

NOTE: It is recommended that you select the variables and the >= sign directly from the variable
list box and keypad provided in the dialog box to prevent mistakes.


9. Click the Continue button, and then click the OK button.

NOTE: Salespersons #49 “Jason” and #44
“Ivett” are a couple of the sales personnel
who will be qualified to receive a $1,000
bonus due to them making $2,000 over
their predicted sales from last lesson (see ).

Figure 72 - Bonus Results

Polynomial Regression
This type of regression involves fitting a dependent variable (Yi) to a polynomial function of a
single independent variable (Xi). The regression model is as follows (see Table 6 for the meaning
of the variables):
Yi = a + b1Xi + b2Xi2 + b3Xi3 + … + bkXik + ei
Table 6 - Breakdown of the Variables
Variable Meaning
a Constant
bj The coefficient for the independent variable to the j’th power
ei Random error term

REGRESSION ANALYSIS
To look at the growth relationship between weight and age:
1. Open the “Growth.sav” file.
2. Click the Analyze menu, point to Regression, and select Curve Estimation…. The
Curve Estimation dialog box opens to define the parameters of the analysis (see Figure
73).
3. Transfer the “wght” variable to the Dependent(s): box and the “age” variable to the
Independent Variable: box.
NOTE: The weight (dependent) variable is what is being predicted using the age (independent)
variable.
4. Deselect the Plot models check box.
5. Select the Display ANOVA table check box.
6. Under Models, deselect the Linear check box and select the Cubic check box.


Figure 73 - Curve Estimation Dialog Box

Analyzing the Results
This cubic model has an R2 of 99.567% (see Figure 74). The F-ratio indicates a highly
significant fit. The best fitting cubic polynomial is given by the follow equation:

(Where Yi is weight and Xi is age);
Yi = 0.052 – 0.017 Xi + 0.010 Xi2 – 0.001 Xi3 + ei

Multiple regression can be used to fit polynomials of higher order. If X is the dependent variable,
use the Transform and Compute options of the Data Editor (as discussed earlier in this lesson)
to create new variables X2 = X*X, X3 = X*X2, X4 = X*X3, etc., then use these new variables
(X, X2, X3, X4, etc.) as a set of independent variables for a multiple regression analysis.


Figure 74 - Polynomial Regression Summary Results

Chart Editing
During the final stage of research, enhancing the appearance of charts and figures can be very
helpful for readers to understand what may seem to be confusing statistics. This will save the
time and effort to copy and paste an object from one program to another and to modify its
features. The following steps explain some useful methods to enhance the appearance of a chart.

ADDING A LINE TO THE SCATTER PLOT
Adding a straight line to fit the scattered pattern of a data chart can help emphasize the linear
relationship among the data.

To add a line to the scatter plot:
1. Click the Graphs menu, point to Legacy Dialogs, and select Scatter/Dot….
2. Select the Simple Scatter option, and then click the Define button.
3. Transfer the “age” variable to the X Axis: box and the “wght” variable to the Y Axis:
box, and then click the OK button. A chart appears in the Output Viewer window.
4. Double-click the chart in the Output Viewer window to modify it. The Chart Editor
window opens (see ).
5. Right-click a chart marker (see ) and select Add Fit Line at Total from the shortcut
menu.
6. Under Fit Method, select the Cubic option, and then click the Apply button.
7. Close the Chart Editor window.
NOTE: Notice that the Add Fit Line at Total does not capture the way the data curves, but the
cubic method is almost a perfect fit (see Figure 77).


Figure 76 - Chart Markers

Figure 75 - Chart Editor Window

Figure 77 - Adding a Fit Line to the Scatter Plot

MANIPULATING THE SCALES ON X- AND Y-AXES
The X-axis and Y-axis can be adjusted to enhance the overall appearance and readability of the
chart. Various elements of the axes can be manipulated, such as scale, ticks and grids, number
format, and axis label.

To manipulate the scales on the X-axis:
1. If necessary, open the “Regression.sav” file.
2. Run the scatter plot where the Y-axis is “Last year sales” and the X-axis is “Years of
experience.”
3. Double-click the chart to open the Chart Editor window.
4. Click the Select the X axis button on the Standard toolbar to manipulate the X-axis.
The Properties dialog box opens.
5. Select the Scale tab (see ).
6. Change the value in the Lower margin (%): box to 0.
7. Select the Labels & Ticks tab (see ).
8. In the Major Ticks section, select the Display ticks check box.
9. Click the Style arrow and select Inside from the list.


Figure 78 - X-axis Properties Dialog Box: Scale Figure 79 - X-axis Properties Dialog Box: Labels
Tab & Ticks Tab

10. Click the Show Grid Lines button on the Standard toolbar to show the Properties
dialog box.
11. Select the Grid Lines tab, select the Major ticks only option, click the Apply button, and
then click the Close button (see ).
12. Click the Select the Y axis button on the Standard toolbar to manipulate the Y-axis.
The Properties dialog box opens.
13. Select the Scale tab (see ).

Figure 80 - Properties Dialog Box: Grid Lines Tab


Figure 81 - Y-axis Properties Dialog Box: Scale
Tab

14. Change the value in the Lower margin (%:) box to 0.
15. Click the Apply button, and then click the Close button.

Figure 82 - Before Manipulating the X-axis Figure 83 - After Manipulating the X-axis

ADDING A TITLE TO THE CHART
Adding a title to the chart is a simple process that enhances the chart’s appearance.

To add a title to a chart:
1. In the Chart Editor window, click in a blank area outside the first chart to select the
whole chart, then move the mouse pointer to one of the selection handles until it becomes
a two-headed arrow.
2. Drag the mouse pointer to reduce the chart size.
3. Click the Insert a text box button on the Standard toolbar. The text box appears
above the chart and the Properties dialog box opens.
4. Type “Relationship Between Last Year Sales and Years of Experience” in the text box.


5. Click the border of the text box to select it.
6. Select the Text Style tab in the Properties dialog box, select a color for the title text, click
the Apply button, and then click the Close button.
7. Click the Bold button on the Standard toolbar, and change the Font Size to “12.”
8. Resize the text box to fit the text.
9. If necessary, resize the chart to display the title at the top of the chart (see ).

Figure 84 - Adding a Title to the Chart

ADDING COLORS TO THE CHART
All elements on the chart can be colored differently to add emphasis or distinguish between
elements.

To add colors to a chart:
1. In the Chart Editor window, select the chart element to change or add color to, such as
one of the plots (see ).
2. Click the Show Properties Window button on the Standard toolbar. The Properties
dialog box opens (see ).
3. Select the Marker tab, and then select a color from the color palette.
4. To change the marker type, click the Type arrow in the Marker section and select a
symbol from the menu (see ).
5. View the changes in the Preview section.


Figure 85 - Adding Color to the Chart

Figure 86 - Properties Dialog Box

FILLING A BACKGROUND COLOR
The background color can also be filled to make the chart stand out.

To fill in a background color:
1. Click inside a blank area of the chart to select the entire chart area (see ).
2. Click the Show Properties Window button on the Standard toolbar. The Properties
dialog box opens.
3. Select the Fill swatch .
4. Click the Pattern arrow and select a background pattern.

Figure 87 - Filling a Background Color



This handout (Chi-Square and ANOVA) introduces basic skills for performing hypothesis tests
utilizing Chi-Square test for Goodness-of-Fit and generalized pooled t tests, such as ANOVA.
The step-by-step instructions will guide the user in performing “tests of significance” using
PASW Statistics and help the user understand how to interpret the output for research questions.


Chi-Square
The Chi-Square (χ2) test is a statistical tool used to examine differences between nominal or
categorical variables. The Chi-Square test is used in two similar but distinct circumstances:
• To estimate how closely an observed distribution matches an expected distribution – also
known as the Goodness-of-Fit test.
• To determine whether two random variables are independent.

CHI-SQUARE TEST FOR GOODNESS-OF-FIT
This procedure can be used to perform a hypothesis test about the distribution of a qualitative
(categorical) variable or a discrete quantitative variable having only finite possible values. It
analyzes whether the observed frequency distribution of a categorical or nominal variable is
consistent with the expected frequency distribution.

With Fixed Expected Values

Can the hospital schedule discharge support staff evenly throughout the week?

A large hospital schedules discharge support staff assuming that patients leave the hospital at a
fairly constant rate throughout the week. However, because of increasing complaints of staff
shortages, the hospital administration wants to determine whether the number of discharges
varies by the day of the week.

For additional handouts, visit http://www.youtube.com/mycsula.

H0: Patients leave the hospital at a constant rate (there is no difference between the discharge
rates for each day of the week).

To perform the analysis:
1. Start PASW Statistics 17.
3. Navigate to the data files folder, select the “chi-hospital.sav” file, and then click the
Open button.

Before the Chi-Square test is run, the observed values need to be declared.

To declare the observed values:
1. Click the Data menu and select Weight Cases…. The Weight Cases dialog box opens
(see Figure 88).

Figure 88 - Weight Cases Dialog Box

2. Select the Weight cases by option.
3. Select the “Average Daily Discharges [discharge]” variable and transfer it to the
Frequency Variable: box.

To perform the analysis:
1. Click the Analyze menu, point to Nonparametric Tests, and select Chi-Square…. The
Chi-Square Test dialog box opens (see Figure 89).


Figure 89 - Chi-Square Test Dialog Box

2. Select the “Day of the Week [dow]” variable and transfer it to the Test Variable List: box
(see Figure 89).
3. Click the OK button. The Output Viewer window opens (see Figure 90).

Figure 90 - Chi-Square Frequencies Output Table

Figure 91 - Chi-Square Test Statistics Output Table


Reporting the analysis results:
H0: Rejected in favor of H1.
H1: Patients do not leave the hospital at a constant rate.

Explanation: Figure 91 indicates that the calculated χ2 statistic, for six degrees of freedom, is
29.389. Additionally, it indicates that the significance value (0.000) is less than the usual
threshold value of 0.05. This suggests that the null hypothesis, H0 (patients leave the hospital at a
constant rate), can be rejected in favor of the alternate hypothesis, H1 (patients leave the hospital
at different rates during the week).

With Fixed Expected Values and within a Contiguous Subset of Values
By default, the Chi-Square test procedure builds frequencies and calculates an expected value
based on all valid values of the test variable in the data file. However, it may be desirable to
restrict the range of the test to a contiguous subset of the available values, such as weekdays only
(Monday through Friday).

The hospital requests a follow-up analysis: can staff be scheduled assuming that patients
discharged on weekdays only (Monday through Friday) leave at a constant daily rate?

H0: Patients discharged on weekdays only (Monday through Friday) leave at a constant daily
rate.

To run the analysis:
1. Click the Analyze menu, point to Nonparametric Tests, and select Chi-Square…. The
Chi-Square Test dialog box opens.
2. Select the Use specified range option (see Figure 89).
3. Enter [2] in the Lower: box and [6] in the Upper: box.
4. Click the OK button. The Output Viewer window opens (see Figure 92 and Figure 93).
Notice that the test range is restricted to Monday through Friday.

Figure 93 - Test Statistics Output Table

Figure 92 - Chi-Square (Subset) Frequencies Output Table

NOTE: The expected values are equal to the sum of the observed values divided by the number of
rows, while the observed values are the actual numbers of patients discharged.

Reporting the analysis results:
H0: Do not reject. Patients discharged on weekdays only (Monday through Friday) leave at a
constant daily rate.


SPSS statistics - how to use SPSS

SPSS statistics - how to use SPSS

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (20)

Similaire à SPSS statistics - how to use SPSS

Similaire à SPSS statistics - how to use SPSS (20)

Dernier

Dernier (20)

SPSS statistics - how to use SPSS