Injustice - Developers Among Us (SciFiDevCon 2024)
Tcxd 300 manual_02.10.10
1.
2. Revised – Feb. 10, 2010
Copyright 2010 NewTek Inc., 5131 Beckwith Blvd. San Antonio, TX USA 78249. TriCaster TCXD300,
TriCaster, 3PLAY, VT[5], SpeedEDIT, LiveSet, LiveMatte, LiveMatte and LiveText are trademarks of NewTek
Inc. All other brand names, product names, or trademarks belong to their respective holders.
5. TABLE OF CONTENTS
PART I (Getting Started) ................................................................................................................1
1 About This Manual ................................................................................................................3
2 Introduction ..........................................................................................................................5
2.1 Overview ........................................................................................................................5
2.2 Startup Screen................................................................................................................5
2.3 Live Desktop ...................................................................................................................6
2.4 Features .........................................................................................................................7
2.4.1 A/V Input and Output .............................................................................................7
2.4.2 Monitoring .............................................................................................................8
2.4.3 Multiple Proc Amps ................................................................................................9
2.4.4 The Switcher ..........................................................................................................9
2.4.5 Transitions..............................................................................................................9
2.4.6 Overlay .................................................................................................................10
2.4.7 Record and Stream ...............................................................................................10
2.4.8 Audio Mixer..........................................................................................................11
2.4.9 Integrated Media Players .....................................................................................11
2.4.10 Keying, Virtual Sets and Virtual Inputs ..................................................................12
2.4.11 Graphics ...............................................................................................................13
2.4.12 Edit .......................................................................................................................13
3 Setting Up ...........................................................................................................................15
3.1 Command and Control .................................................................................................15
3.2 Activating & Authorizing Windows™ ............................................................................16
3.3 TriCaster License and Registration ................................................................................17
3.3.1 Online Registration ...............................................................................................17
3.3.2 Registering by Telephone .....................................................................................18
3.4 Input Connections ........................................................................................................18
3.4.1 Connect A/V Sources ............................................................................................18
i
6. 3.5 Genlock Connection......................................................................................................20
3.5.1 Genlock Connection ..............................................................................................20
3.6 Output Connections .....................................................................................................21
3.6.1 A/V Output ...........................................................................................................21
3.6.2 HD and SD ............................................................................................................22
3.6.3 Connecting Devices ..............................................................................................22
3.6.4 VGA Output ..........................................................................................................23
3.7 Tally Lights ...................................................................................................................24
3.7.1 External Connections ............................................................................................24
3.8 Starting a Session .........................................................................................................25
3.9 Configure Video Output................................................................................................28
3.9.1 SD Analog Configuration .......................................................................................28
3.9.2 Configure VGA Output ..........................................................................................30
3.10 Configure Video Input ..................................................................................................31
3.11 Configure Audio ...........................................................................................................32
3.12 Configure Genlock ........................................................................................................34
3.13 Networking ..................................................................................................................36
4 Live Production Walkthrough .............................................................................................37
4.1 Creating a Session ........................................................................................................37
4.2 Importing Content ........................................................................................................38
4.3 Monitoring ...................................................................................................................39
4.3.1 Program Output ...................................................................................................39
4.3.2 All Monitors .........................................................................................................40
4.3.3 Switcher Monitors ................................................................................................41
4.4 Audio Mixer .................................................................................................................42
4.4.1 Mute, Mono and Balance .....................................................................................42
4.4.2 Pan .......................................................................................................................45
4.4.3 Talk ......................................................................................................................46
4.4.4 Follow ..................................................................................................................46
ii
7. 4.5 Network Sources ..........................................................................................................47
4.5.1 iVGA Clients..........................................................................................................47
4.5.2 LiveText™ .............................................................................................................48
4.6 Switching .....................................................................................................................49
4.6.1 Switcher Rows ......................................................................................................49
4.6.2 Transitions............................................................................................................50
4.7 Record and Grab ..........................................................................................................51
4.7.1 Record ..................................................................................................................52
4.7.2 Grab .....................................................................................................................53
4.8 Media Players ..............................................................................................................54
4.8.1 DDR ......................................................................................................................54
4.8.2 Stills .....................................................................................................................59
4.8.3 Titles ....................................................................................................................61
4.9 Overlay ........................................................................................................................62
4.10 LiveMatte.....................................................................................................................66
4.11 Virtual Inputs ...............................................................................................................69
4.11.1 Composing Inputs A and B ....................................................................................69
4.11.2 Adding an Upstream Overlay ................................................................................71
4.11.3 LiveSet™ ...............................................................................................................73
4.12 Streaming ....................................................................................................................76
4.12.1 Streaming Configuration ......................................................................................77
4.12.2 Simple Pull Streaming ...........................................................................................78
4.12.3 Push and Flash Streaming .....................................................................................78
4.12.4 Capturing the Stream ...........................................................................................79
PART II (Reference) .....................................................................................................................81
5 The Startup Screen ..............................................................................................................83
5.1 Introduction to Sessions ...............................................................................................84
5.2 The Home Page ............................................................................................................85
5.2.1 New (Session) .......................................................................................................86
5.2.2 Open (Session) .....................................................................................................87
iii
8. 5.2.3 Shutdown .............................................................................................................89
5.2.4 Utilities .................................................................................................................90
5.2.5 Help .....................................................................................................................92
5.3 The Session Page ..........................................................................................................93
6 Live Desktop: Overview ....................................................................................................101
6.1 Display Requirements .................................................................................................101
6.2 Overview .................................................................................................................... 102
6.3 A Few Hints ................................................................................................................ 102
6.4 Titlebar Tips ............................................................................................................... 103
6.4.1 Status Bar ........................................................................................................... 104
7 Desktop Monitors .............................................................................................................105
7.1 Program Output .........................................................................................................105
7.1.1 Configuration Indicators ..................................................................................... 106
7.2 All Monitors Tab .........................................................................................................106
7.2.1 Contextual Tools.................................................................................................107
7.2.2 Interactive Control ............................................................................................. 109
7.3 Switcher Monitors Tab ............................................................................................... 109
7.3.1 Contextual Tools.................................................................................................110
7.4 Preview Scopes Tab ....................................................................................................110
8 I/O Configuration ..............................................................................................................113
8.1 Output Configuration .................................................................................................113
8.1.1 Separate Output Controls ................................................................................... 114
8.1.2 Proc Amp............................................................................................................ 115
8.1.3 SD Analog Connections ....................................................................................... 117
8.1.4 VGA Output ........................................................................................................118
8.1.5 Genlock .............................................................................................................. 119
8.1.6 Center Frequency ............................................................................................... 122
8.2 Input Configuration ....................................................................................................122
iv
9. 8.2.1 Connection Type ................................................................................................ 123
8.2.2 Proc Amp............................................................................................................ 126
8.2.3 LiveMatte ........................................................................................................... 127
9 Network Sources ...............................................................................................................129
9.1 iVGA ........................................................................................................................... 129
9.1.1 iVGA for OS X™ ...................................................................................................129
9.1.2 iVGA for Windows® ............................................................................................ 131
9.2 LiveText ...................................................................................................................... 132
10 Streaming ......................................................................................................................135
10.1 TriCaster Streaming ...................................................................................................135
10.1.1 Pull Profiles ........................................................................................................136
10.1.2 Push Profiles .......................................................................................................137
10.1.3 Capturing the Stream ......................................................................................... 138
10.2 Streaming Strategies ..................................................................................................138
10.2.1 On Demand, or Live? .......................................................................................... 138
10.2.2 Streaming Protocols ........................................................................................... 141
10.2.3 Streaming Media Providers ................................................................................ 143
10.2.4 Other Resources .................................................................................................144
10.3 Production and Capture Considerations .....................................................................144
10.4 Configuration and Troubleshooting ............................................................................ 145
10.4.1 Testing your stream............................................................................................ 145
11 Record and Grab ...........................................................................................................155
11.1.1 Record ................................................................................................................ 155
11.2 Grab........................................................................................................................... 157
12 Switcher, Transitions and Overlay.................................................................................159
12.1 Switcher Rows ............................................................................................................ 159
12.2 Transitions ................................................................................................................. 161
12.2.1 Take and Transition ............................................................................................ 161
v
10. 12.2.2 FTB ..................................................................................................................... 162
12.2.3 T-Bar .................................................................................................................. 162
12.2.4 Transition Selector ............................................................................................. 163
12.3 Overlay ...................................................................................................................... 164
12.3.1 Two Channels .....................................................................................................164
12.3.2 Overlay Source ...................................................................................................164
12.3.3 Sources and Transparency .................................................................................. 165
12.3.4 Position (and Size) .............................................................................................. 166
12.3.5 Activate .............................................................................................................. 167
12.3.6 Link Overlays ......................................................................................................168
13 DDR, Stills and Titles .....................................................................................................169
13.1 Specialized Media Players .......................................................................................... 169
13.2 Shared Features .........................................................................................................170
13.2.1 Playlists .............................................................................................................. 170
13.2.2 Media Browser ..................................................................................................173
13.2.3 Controls ............................................................................................................. 176
13.2.4 Preset Bin ........................................................................................................... 178
13.3 Speed ......................................................................................................................... 179
13.4 Editing Title Pages ......................................................................................................179
14 LiveMatte ......................................................................................................................183
14.1 Chromakeying ............................................................................................................ 184
14.2 Matte......................................................................................................................... 185
14.2.1 Color .................................................................................................................. 185
14.2.2 Tolerance ........................................................................................................... 186
14.2.3 Smoothness........................................................................................................186
14.3 Spill Suppression ........................................................................................................186
14.4 Garbage Matte ..........................................................................................................187
14.5 Compositing ............................................................................................................... 188
14.6 Fine Tuning ................................................................................................................ 188
vi
11. 14.7 Practical Staging for LiveMatte .................................................................................. 189
14.7.1 Lighting .............................................................................................................. 189
14.7.2 Connection Considerations ................................................................................. 190
15 Virtual Inputs ................................................................................................................191
15.1 Primary Video Sources................................................................................................ 192
15.2 Position ...................................................................................................................... 193
15.3 Overlay ...................................................................................................................... 194
15.4 LiveSet ....................................................................................................................... 195
15.4.1 LiveSet Selection ................................................................................................ 195
15.4.2 Video Sources .....................................................................................................196
15.4.3 Zoom Presets .....................................................................................................197
15.4.4 Zoom T-Bar.........................................................................................................198
15.4.5 Input Position .....................................................................................................198
15.4.6 Animate Zoom ....................................................................................................199
16 Audio .............................................................................................................................201
16.1 External Sources .........................................................................................................202
16.1.1 Input 1................................................................................................................ 202
16.1.2 Input 2 and 3 ......................................................................................................206
16.1.3 Common Features .............................................................................................. 207
16.2 Internal Sources .........................................................................................................210
16.2.1 DDR and Stills .....................................................................................................210
16.3 Output Controls..........................................................................................................210
16.3.1 Master (and Phones) .......................................................................................... 211
16.3.2 Aux and Stream Output ...................................................................................... 211
16.4 Preset Bin ................................................................................................................... 212
17 SpeedEDIT and LiveTEXT ...............................................................................................213
17.1 SpeedEDIT .................................................................................................................. 213
17.1.1 Sessions, Projects and Display ............................................................................ 213
17.1.2 Filebin Quicktabs ................................................................................................ 214
vii
12. 17.1.3 IEEE1394 I/O Output .......................................................................................... 215
17.1.4 SpeedDIT Desktop .............................................................................................. 215
17.2 LiveText ...................................................................................................................... 215
17.2.1 Sessions, Projects and Display ............................................................................ 215
17.2.2 Files/Filebin ........................................................................................................216
17.2.3 Naming Stand-in Images ..................................................................................... 217
PART III (Appendices)................................................................................................................219
A How Do I … ? .....................................................................................................................221
A.1 Connections ............................................................................................................... 223
A.1.1 Connect cameras? .............................................................................................. 223
A.1.2 Connect monitors? ............................................................................................. 224
A.1.3 Connect the LC-11 control surface? ....................................................................226
A.1.4 Connect An External Hard Drive?........................................................................226
A.1.5 Connect Tally Lights? .......................................................................................... 226
A.1.6 Connect to a Network? ....................................................................................... 226
A.2 Sessions ..................................................................................................................... 226
A.2.1 Start an SD Session? ........................................................................................... 226
A.2.2 Start an HD Session?........................................................................................... 227
A.2.3 Work on a Stored Session? ................................................................................. 227
A.2.4 Backup a Session? .............................................................................................. 227
A.2.5 Restore a Session? .............................................................................................. 228
A.2.6 Delete a Session (and its Content)? ....................................................................228
A.2.7 Manage Selected Content inside a Session? ....................................................... 228
A.2.8 Rename a Session? ............................................................................................. 229
A.2.9 Duplicate a session. ............................................................................................ 229
A.3 Live Production........................................................................................................... 229
A.3.1 Make Custom Transitions and LiveSets? ............................................................. 229
A.3.2 Restore the Default LiveSet? .............................................................................. 229
A.3.3 Initiate Streaming? ............................................................................................. 230
A.3.4 Find my Captured Stream file? ........................................................................... 230
A.3.5 Record my Program? .......................................................................................... 230
A.3.6 Find my Recorded Program File? ........................................................................231
viii
13. A.3.7 Change Playback Speed for Clips in the DDR (Media Player)? ............................. 231
A.3.8 Get Stubborn Clips (MOV or AVI) to Play in the DDR? .........................................231
A.3.9 Change Colors for an Entire Title Playlist at Once? .............................................. 232
A.3.10 Get Live Title Pages (.cgxml) to Respect All LiveText Font Attributes? ................. 233
A.3.11 Prepare a Matched Group of Virtual InpUts? ...................................................... 233
A.3.12 Improve the Quality of VGA Output? ..................................................................234
A.3.13 View Timecode on VGA Out when Set to ‘All Sources’? ......................................234
A.4 Files............................................................................................................................ 234
A.4.1 Manage Files? ....................................................................................................234
A.4.2 Change the Recording Quality? ..........................................................................234
A.4.3 Import Media Files?............................................................................................ 235
A.4.4 Add an External File Location to the File Browser? ............................................. 235
A.4.5 Remove a Location From the File Browser? ........................................................ 236
A.4.6 Export files to an External Drive? ........................................................................236
A.4.7 Import/Export Files Larger Than 4 Gigabytes? .................................................... 237
A.4.8 Avoid the Export Error “…copy this file without its properties?” ......................... 237
A.4.9 Free Up Space by Deleting the Demo Clips? ....................................................... 237
A.5 Software, Maintenance and Updates .........................................................................238
A.5.1 Improve Performance? ....................................................................................... 238
A.5.2 Resolve Serious Instability or Dropped frames? .................................................. 238
A.5.3 Update TriCaster? .............................................................................................. 238
A.5.4 Update the Flash™ and/or Windows Media Encoder? ........................................238
A.5.5 Install Virus Protection? ..................................................................................... 239
A.5.6 Install My Favorite Software (or Codec)? ............................................................ 239
A.5.7 Restore TriCaster to Original ‘As-Shipped’ Condition? ........................................239
A.6 Registration And Tech Support ................................................................................... 240
A.6.1 Register TriCaster? ............................................................................................. 240
A.6.2 Contact Technical Support? ................................................................................ 241
A.6.3 Find TriCaster’s Hardware/Firmware Revision Numbers? ...................................241
A.6.4 Save the Debug Log? .......................................................................................... 241
A.7 Miscellaneous ............................................................................................................ 241
A.7.1 Access Windows™? ............................................................................................ 241
A.7.2 Return to TriCaster from the Widows™ Desktop ................................................ 242
A.7.3 Add A New Streaming Profile to the Stream Configuration Panel?...................... 242
ix
14. A.8 More questions and Answers ..................................................................................... 244
A.8.1 Why Do Some Thumbnail Icons Look Wrong?..................................................... 244
B Performance Considerations .............................................................................................245
B.1 Testing, One Two … ....................................................................................................245
B.2 iVGA and Performance ............................................................................................... 245
B.3 IMAG and Latency ......................................................................................................246
B.3.1 Relativity and the Speed of Light ........................................................................246
B.3.2 Latency and Your Audience ................................................................................ 247
B.3.3 Latency and Your TriCaster ................................................................................. 247
B.3.4 Other Sources of Latency.................................................................................... 248
C Video Calibration ..............................................................................................................251
C.1 What (And Where) to Calibrate? ................................................................................ 252
C.2 Calibrating Video Sources ........................................................................................... 252
C.2.1 Setting Black and White...................................................................................... 253
C.2.2 Adjusting Color ...................................................................................................254
C.2.3 Color Metrics ......................................................................................................255
C.3 Calibrating Your Monitors .......................................................................................... 258
C.3.1 Computer Monitor ............................................................................................. 258
C.3.2 Program Output Monitor ................................................................................... 258
C.3.3 Setting Black and White...................................................................................... 259
C.3.4 Color Adjustments .............................................................................................. 261
D Keystroke Shortcuts ..........................................................................................................265
D.1 Switcher… .................................................................................................................. 265
D.2 T-Bar .......................................................................................................................... 265
D.3 Record and Grab ........................................................................................................266
D.4 Tabs ........................................................................................................................... 266
D.5 DDR............................................................................................................................ 266
D.6 Stills ........................................................................................................................... 267
x
15. D.7 Titles .......................................................................................................................... 267
D.8 General ...................................................................................................................... 268
D.8.1 Misc. .................................................................................................................. 268
D.8.2 Selection… ..........................................................................................................268
Index .........................................................................................................................................269
Credits.......................................................................................................................................273
xi
16.
17. PART I (GETTING STARTED)
Introducing TriCaster™ TCXD300 – connections and registration, a top-level overview of primary
features, and a hands-on tour to get you started.
Page | 1
18.
19. 1 ABOUT THIS MANUAL
Hate reading manuals? If so, you are part of the majority
(estimates are that between 60 and 97% of the human race
concur). Most prefer to jump right in, maybe asking a friend for
occasional help (and who can blame them)?
This manual attempts to tell you what you need to know in a
friendly, concise way, while also providing a deeper reference
section you can turn to when you really need specifics.
If you do hate reading, please take a moment to peruse at least this section, which explains the
manual’s organization. You may find you can escape with a minimum of reading. (Or, if you are a
devout reader, you can be the hero the others turn to for expert advice!)
Part I - Getting Started: introduction to TriCaster; connecting devices (cameras,
monitors, etc.) and registration, ending with the Live Production Walkthrough – a brisk
jog through fundamentals, about 45 pages (if you’re a quick study, this may provide all
you need).
Part II – Reference: chapters in this section cover every arcane detail related to using
TriCaster – for those who need it, and those who just like to know everything.
Part III – Appendices: leads off with a handy section titled “How do I …?“, a helpful
question and answer section with its own brief index. When you have a specific need,
you may well find a quick answer here - along with cross references to more detailed
information when appropriate. Appendix B lists all shortcut keys. Part III is also home
to a comprehensive keyword index.
Page | 3
20.
21. 2 INTRODUCTION
Thank you for purchasing this NewTek™ product. TriCaster™
TCXD300 is the newest addition to a family of video systems and
software with a proud heritage. A genuine video pioneer, NewTek
is justifiably proud of its innovation, ongoing commitment to
excellence and superb product support.
This chapter provides a quick tour of the major components of your
TriCaster system.
2.1 OVERVIEW
Traditionally, producing live high definition television has been very costly, requiring very
expensive equipment and a large crew. TriCaster TCXD300 (like its standard definition siblings)
changes all that. In one lightweight, portable system (small enough to fit in a backpack) you have
a complete toolset to create, broadcast, web stream and project your HD production. TriCaster
TCXD300 even includes NewTek’s revolutionary LiveSet™ system to provide you with network
quality virtual sets, for ‘bigger than life’ production capabilities.
TriCaster thus sets a new benchmark for “portable live production”. It is the most complete,
reliable and efficient system available for live production and web streaming. Its small footprint
makes it possible to broadcast from almost anywhere, and it requires just one person to operate.
No matter what your live broadcast ambitions are, TriCaster can help you fulfill them.
With TriCaster you can produce and distribute live video programs (in both Standard and High
Definition) from diverse sources and materials – use multiple cameras, recorded digital video,
PowerPoint™ presentations on networked laptops, live web pages, digital photos and graphics,
and much more. Your presentations can be simultaneously displayed by video projectors,
television monitors and streamed in high quality on the Internet.
2.2 STARTUP SCREEN
When you power up TriCaster the Startup Screen appears. This is your command center for
initiating most other operations.
Page | 5
22. Figure 1
The Startup Screen allows you to define and open sessions, each of which can be customized for
various productions or other purposes. Later, when you re-open a session, all of its assets and
settings are remembered.
Having created a session (or opened an existing one), you proceed to the similar Sessions screen.
Here you can launch the Live Desktop (for live production), or perhaps choose to Edit, prepare
Graphics (title pages), or Manage content from the rotating function selector allow.
2.3 LIVE DESKTOP
TriCaster’s live production features are all available from its unique Live Desktop, which in large
measure mimics familiar production equipment. That said, the Live Desktop provides a great
deal more functionality than that of similar single-purpose devices.
The various features, controls and modules comprising TriCaster’s Live Desktop are essentially
laid out in three horizontal bands, as seen in Figure 2.
Page | 6
23. MONITORING
LIVE CONTROL
TABBED MODULES
Figure 2
The uppermost area is devoted to monitoring. The Switcher is centrally located, and is also
home to the Transition and Overlay controls. The bottom-most section of the Live Desktop
holds side-by-side tabbed panels featuring media players (DDR, Stills and Titles), Virtual Input
setup, and the Audio Mixer.
2.4 FEATURES
Here’s a brief overview of just some of TriCaster’s key features:
2.4.1 A/V INPUT AND OUTPUT
Live switch between three SDI and/or analog HD or SD cameras.
Professional BNC video connectors provide increased durability and reliability for
camera connections.
Input and output 4:3 or 16:9 widescreen formats.
Freely mix SD and HD sources in both HD and SD sessions.
Page | 7
24. Output SD and HD simultaneously.
Integrated DDR and Stills modules allow you to insert pre-recorded video, sounds or
imagery into your live presentations.
Select Microsoft Windows™ or Apple MacIntosh™ computers on the same network ™ as
Switcher inputs for your live productions using NewTek's iVGA client.
Mix internal and external audio sources.
Supply external audio via analog, AES/EBU (AES3) or SDI Embedded audio.
Balanced XLR and ¼ phone jack audio connectors.
Send output to a video to a projection system (or secondary monitor), up to WUXGA
(1920x1200) resolution.
2.4.2 MONITORING
Figure 3
TriCaster’s Live Desktop includes a large Program output monitor with associated controls. Also,
freely toggle between viewing:
All Monitors - ISO monitors for all sources (Figure 3)
Switcher Monitors - Preview and Effects row selections ( )
Preview Scopes - Waveform and Vectorscope monitors, along with the Preview row
selection
Plentiful second monitor output options including:
o All ISOs plus Preview, Program and clock
o Waveform + Vectorscope + Preview
o More …
Page | 8
25. 2.4.3 MULTIPLE PROC AMPS
Separate control over the Brightness, Contrast, Hue and Saturation for each video
input.
Separate Proc Amp control over Program output and VGA (projector) output.
2.4.4 THE SWITCHER
Figure 4
The three row Switcher allows you to freely hot-punch between external (Camera and Network),
internal (DDR, Stills and Titles) and Virtual Inputs, or Take/Transition between Preview and
Program row selections. The Effects row allows you to choose a third source for use in Overlay
channels or Virtual Inputs.
2.4.5 TRANSITIONS
Figure 5
Page | 9
26. One-click FTB (Fade to Black), Take or Transition.
Traditional T-bar transition controller.
Reverse switch.
Ping Pong – automatically cycle the direction of transitions.
Transition Speed presets and variable timing.
2.4.6 OVERLAY
TriCaster’s Overlay section provides dual-channel
downstream keying, allowing you to assign any switcher
source to either channel. Overlay channels can be displayed
(and removed) in tandem or independently.
You might use the Stills, Titles and DDR modules to overlay
graphics and text, including scrolls, crawls and motion
lower-thirds -- but there’s nothing preventing you from
assigning a Camera input or Network source as an overlay
using the Overlay section’s source selector buttons.
Figure 6
Independent Position and Scale controls for each overlay channel permit you (for example) to
configure two live sources as ‘Picture in Picture’ elements using the Overlay channels, freely
switching them on and off (with or without individual custom effects), all without using the main
Switcher rows and Transitions section (which thus remain free for other duties).
2.4.7 RECORD AND STREAM
Record your live-switched production at full resolution to a multi-platform compatible
format, or archive your Internet stream.
Simultaneous output for broadcast, projector and live web stream to in-house and
remote audiences.
Use either Windows Media™ or Flash Media™ streaming.
Store over 18 hours of HD video.
Page | 10
27. 2.4.8 AUDIO MIXER
Figure 7
TriCaster provides extensive multi-channel audio control and management. Adjust individual
audio sources (internal and external) and introduce them into your program manually or
automatically. Control output levels for program, headphones, auxiliary output and stream
separately. Presets allow single-click access to prepared mixer setups.
2.4.9 INTEGRATED MEDIA PLAYERS
TriCaster’s media players and title system serve up graphics and titles during your live
productions quickly and easily.
Add a/v clips, sound files or still image files to the DDR (Stills supports image files,
sounds and title pages).
Trim and re-order playlist entries.
Store playlists as presets for easy recall.
Flexible playback controls include variable Speed and Loop options.
Page | 11
28. Figure 8
Start and stop playback manually or automatically.
Use two media players (DDR, Stills or Titles) to create automated ‘slide-shows’,
complete with transitions.
Assign titles, graphics or a/v clips to multiple Overlay channels.
2.4.10 KEYING, VIRTUAL SETS AND VIRTUAL INPUTS
Use LiveMatte™ realtime keying technology for green/blue screen effects.
Apply independent LiveMatte settings to all video sources.
Achieve the look of a sophisticated studio setting in a very small space with NewTek’s
LiveSet™ virtual set technology.
Page | 12
29. Figure 9
Zoom in/out on LiveSets during your live productions right from the Live Desktop.
Virtual Inputs (Figure 9) permit M/E (Mix/Effect) style compositions of two primary
switcher sources, with convenient scale and position controls.
Virtual Inputs also sport an integrated overlay channel, selected from any switcher
source, with its own scale and position controls.
Module presets allow single-click access to prepared playlists for DDR, Stills and Titles,
as well as pre-configured Virtual Input setups.
2.4.11 GRAPHICS
Also part of TriCaster’s integrated software suite is LiveText, NewTek’s professional titling and
graphics application. LiveText allows you to create your own custom title pages and motion
graphics, including scrolls and crawls.
2.4.12 EDIT
The full version of NewTek’s popular and versatile non-linear video editing program SpeedEDIT™
is included as well. SpeedEDIT provides powerful tools to let you prepare movies for insertion
into your live productions, or perform broadcast quality post production work on recorded
programs.
Edit, import and export in full HD resolution.
Page | 13
30. Realtime external hardware project preview in HD or SD.
Import and export file format support includes MPEG2 and QuickTime for versatility in
program delivery.
In summary, TriCaster gives you the power of a network control room and post production
facility in one simple to use broadcast appliance. Let’s jump in now. First, we’ll get you
connected; then we’ll explore TriCaster’s most important features.
Page | 14
31. 3 SETTING UP
This chapter explains how to properly connect power, external
control devices, monitors and audio visual sources to your NewTek
TriCaster system.
It also reviews registration for warranty purposes and technical
support. After completing this short section, you’ll be all set to
continue into the Quick Start chapter that follows it.
To begin, let’s review ‘what came in the box’:
1. TriCaster TCXD300
2. Keyboard and Mouse
3. A/C power cord
4. DVI->VGA adapter, DVI->HDMI cable and BNC->RCA adapters
5. TriCaster / 3PLAY First Look DVD
6. Getting Started DVD
7. XD300 Quick Start Guide
8. Registration reminder card
3.1 COMMAND AND CONTROL
1. Connect an external computer monitor to a port appropriate for your monitor
connection (DVI or VGA) on TriCaster’s backplate – use an adapter if necessary.
Note: TriCaster’s user interface requires a minimum screen resolution of 1280 x 1024 for 4:3, or
1440 x 900 for 16:9.
2. Connect the mouse and keyboard to USB ports on TriCaster.
3. Connect the A/C power cord from the three-prong connection on TriCaster’s backplate
to an external power receptacle (see Hint below).
4. Turn on the computer monitor.
5. Press the Power switch located on TriCaster’s faceplate.
Page | 15
32. At this point, the blue Power LED will illuminate, and the adjacent hard drive activity light should
flicker as the device boots up. (If this does not happen, check your connections and retry).
Hint: Though not required for TriCaster to function, it is always wise to use an uninterruptable
power supply (UPS) for any ‘mission critical’ system. Likewise, consider A/C “power conditioning”,
especially in situations where local power is unreliable or ‘noisy’.
Power conditioning can reduce wear on power supplies and other electronics, and also provide a
measure of protection from surges, spikes, lightning and high voltage.
3.2 ACTIVATING & AUTHORIZING WINDOWS™
(Your dealer may have performed this operation for you as part of his pre-delivery service.)
When you see the ‘Welcome to Windows’ screen:
1. Click Next at lower right.
2. Choose your time zone.
3. Accept the license agreement.
4. Enter your 25-digit key.
5. Decline automatic updates (by clicking “not right now”).
6. Give TriCaster a distinct computer name for networking.
You can authorize your Windows installation by network or by telephone. Assuming you have an
Internet connection available, and have connected TriCaster to it with an Ethernet cable, the
Internet is the fastest method of activation. (See Section 3.13 for more on network connections.)
7. Click ‘Obtain IP and DNS automatically’.
8. Agree to activate Windows. This activation is permanent, and you won’t see these
screens again. (Registration with Microsoft is optional).
9. Assign a name to the administrator account. You may type your name, company, or
perhaps simply “TCXD”.
10. Click Finish, and you system will re-start.
After restarting and accepting NewTek’s User Agreement, the interface will load automatically.
Page | 16
33. 3.3 TRICASTER LICENSE AND REGISTRATION
On launch, TriCaster presents an End User License Agreement dialog. After you accept this, the
Registration dialog shown in Figure 10 is presented. It provides the unique Product ID you need
to register your system. A 90 day period is allowed for your TriCaster to be registered and
‘unlocked’ (by entering the registration code in the space provided.)
Figure 10
You can register and obtain your registration code either by telephone, or online (directly from
TriCaster or from another system connected to the Internet) as described next.
3.3.1 ONLINE REGISTRATION
If you have connected your TriCaster to the Internet, simply click the button under Step 2 in the
registration dialog. This will take you to the Registration page (http://register.newtek.com) in
the Customer Care section of NewTek’s website where you will find further directions.
Hint: More information on connecting TriCaster to a network can be found in Section 3.13
Otherwise, you can visit the registration webpage from another system with Internet access. In
either case, after registering on the website, enter the resulting registration code into the field
provided at Step 3 of the dialog. (You’ll want to record the login name and password you choose
when creating your website profile, and check your personal area of the site from time to time
Page | 17
34. afterward. Among other things, you’ll be able to download any software updates that are made
available.)
3.3.2 REGISTERING BY TELEPHONE
NewTek’s Customer Care center can also handle registration requests by telephone, if that is
more convenient (when opportunity permits, you should still visit the website as discussed above
to gain access to software updates). Please have your Product ID (from the Registration dialog
mentioned earlier) handy when you call.
The phone numbers for Customer Service follow:
Telephone: (US) 1-800-862-7837
(Outside US) +1-210-370-8000
Fax: 210-370-8001
Note: For Technical Support contact information, please see Section A.6.2.
3.4 INPUT CONNECTIONS
3.4.1 CONNECT A/V SOURCES
Three external audio and video sources can be added to the input connectors on TriCaster’s
front panel.
Figure 11
Page | 18
35. 1. Connect video sources to the appropriate connectors in the VIDEO IN section, whether
SDI, Component, Y/C (S-Video) or Composite (may require RCA to BNC adapter)
a. SDI – Attach the SDI source connectors to BNC connectors marked SDI in the
Video In group.
Hint: If your equipment supports SDI, this is your best quality I/O option.
b. Component – Attach the appropriate BNC connectors from your sources to the
second, third and fourth BNC connectors (labeled Y, Pb and Pr) in each row in
the Video In group.
c. Y/C – If your S-Video equipment and cabling has the usual 4-pin mini-DIN
connectors, you will need an S-Video to dual BNC adapter. To connect Y/C
sources, attach the Y (luma) connector of your source to the third of four BNC
connectors (labeled Pb). Attach the source’s C (chroma) connector to the
fourth connector (labeled Pr).
d. Composite - Attach the composite source’s connector (may require an RCA to
BNC adapter) to the second connector (labeled Y).
Note: The video broadcast standard (such as NTSC, NTSC-J or PAL) of all video sources
connected for a given session must be the same.
2. To input analog audio* along with the video, connect the external audio sources to the
XLR or 1/4 inch (6.3mm) phone jacks provided beside each video input section.
* Note: SDI video sources with embedded audio do not need a separate audio
connection. Use the BNC connectors in the Digital Audio sections if required to connect
AES/EBU audio sources.
Page | 19
36. 3.5 GENLOCK CONNECTION
3.5.1 GENLOCK CONNECTION
The Genlock input on TriCaster’s front panel (Figure 12) is for connection of a ‘house sync’ or
reference signal (often a ‘black burst’ signal intended specifically for this purpose). Many studios
use this method to synchronize equipment in the video chain.
Figure 12
Genlocking is commonplace in higher end environments, and genlock connections are usually
found on professional gear. If your equipment allows you to do so, you should genlock all
cameras supplying TriCaster, and TriCaster itself. To genlock TriCaster, supply the reference
signal from the ‘house sync generator’ to TriCaster’s Genlock connector.
(If you haven’t already done so, genlock all cameras connected to TriCaster inputs to the same
reference signal – see your camera manual for details.)
IMPORTANT Note: Digital audio is less forgiving in certain respects than analog. To avoid
occasional audio glitches when mixing digital audio (whether for recording or live production) you
must ensure that the timing for all digital audio sources is synchronized.
This means that for digital audio, you must do one of the following: 1) genlock all digital audio
sources and TriCaster to a house reference signal, or 2) genlock the cameras directly to the XD
output.
Page | 20
37. 3.6 OUTPUT CONNECTIONS
Next we’ll discuss the vital external audio
and video connectors, and relevant
settings.
We’ll start with output connections, not
only so you can view your results, but
because some aspects are best considered
before even beginning a TriCaster session.
Figure 13
3.6.1 A/V OUTPUT
TriCaster provides three separate video and audio output connector groups, and very flexible
options for display of your live and recorded video streams. Here are some of your options:
Figure 14
Simultaneously send program output to both Standard and High Definition devices.
Simultaneously send program output to both Analog and Digital devices.
Send program output to a secondary monitor or projector.
Stream program output to the Internet via a suitable network connection.
Page | 21
38. 3.6.2 HD AND SD
As mentioned above, TriCaster supports simultaneous output of both SD (Standard Definition)
and HD (High Definition) video. Flexible video output is conveniently presented on TriCaster’s
faceplate. The Video Output section provides three rows of BNC connectors which offer the
following connection possibilities for live production:
Row 1 and 2 output format is determined by the session (see Section 5.1)
o When the session is SD (4:3 or 16:9), output is SD (4:3 or 16:9).
o When the session is HD, output is HD.
Row 3 always outputs video in SD format. If the session is 16:9, output from Row 3 is
also 16:9, and output will likewise match SD 4:3 sessions.
3.6.3 CONNECTING DEVICES
1. Connect downstream video devices to the appropriate output connectors in the VIDEO
OUT section, whether SDI, Component, Y/C (BNC) or Composite. Please note that the
latter two formats may require RCA (cinch type) or S-video (4 pin mini-DIN) to BNC
adapters, and also that both of these connection options support output at SD
resolution only.
a. SDI – Attach SDI connectors to the BNC connectors marked SDI.
Hint: If your equipment supports SDI connections, this is your best quality option.
b. Component – Attach your device to the second, third and fourth BNC
connectors (labeled Y, Pb and Pr).
c. Y/C – If your S-Video equipment and cabling has the usual 4-pin mini-DIN
connectors, you will need an ‘S-Video to dual BNC’ adapter. Attach the Y
(luma) connector of your device to the third BNC connector (labeled Pb).
Attach the C (chroma) connector to the fourth connector (labeled Pr).
d. Composite - Attach the device’s connector to the second connector (labeled Y).
Page | 22
39. 2. Connect TriCaster’s audio outputs:
a. Analog audio – connect external audio devices to the ¼” phone jacks in the
ANALOG AUDIO OUT section.
b. Digital audio - a separate audio connection is not necessary for SDI output with
embedded audio. Use the BNC connectors in the DIGITAL AUDIO OUT section
to connect downstream AES/EBU (AES3) audio devices.
Hint: TriCaster’s SDI and analog output sections can be used simultaneously. For example, you
could use the Composite output to view your program on a local composite monitor at the same
time as you use the SDI connection to supply broadcast equipment.
3.6.4 VGA OUTPUT
A secondary monitor (or projection device) can be connected to TriCaster and used for a variety
of purpose ranging from program output for IMAG (Image Magnification) installations or local
monitoring for the convenience of the operator.
Figure 15
Page | 23
40. Simply connect the secondary device to the unused video output connector (DVI or VGA) on
TriCaster’s backplane before powering up. The new device should be recognized and enabled by
the system automatically, and you can configure it using settings in TriCaster’s Live Desktop
(after creating a session).
Note: Physical ports may vary from Figure 15. Depending on the type of connection your external
device supports, you may need an adapter to connect it. Also, it is important to configure VGA
Output to the native resolution of the external display (monitor or projector) for best results.
3.7 TALLY LIGHTS
TriCaster’s Tally Light support includes Program and Preview row selections (and both). The
current Program row selection is indicated by a red LED. The Preview row selection is indicated
by a green LED. When an input is selected for both Program and Preview, the tally light will be
amber. For Virtual Inputs, the LED will light up when the source assigned to Input A is selected
(on Program or Preview).
3.7.1 EXTERNAL CONNECTIONS
TriCaster provides 1.8” (3.5mm) female jacks next to each of the
LEDs on its faceplate. These are located just left of the SDI
connectors (under the column heading, Tally).
The jacks accept a standard 1.8” (3.5mm) male TRS plug. The
Figure 16
‘TRS’ designation refers to "tip", "ring" and "sleeve", describing
the 3 contacts on the 3 plug (Figure 16).
The tip and ring contacts supply a ‘logic low’ signal when the corresponding tally light is
not lit, and ‘logic high’ when it is.
An external LED may be directly driven by connecting it across either the tip and sleeve,
or the ring and sleeve. The LED anode should be connected to the tip or ring, and its
cathode to the sleeve.
Page | 24
41. The tip-sleeve contact state is controlled by the Program row selection, corresponding
to the red Tally Light on TriCaster’s faceplate.
The ring-sleeve contact state is controlled by the Preview row selection, corresponding
to a green Tally Light on TriCaster’s faceplate.
When an input is selected on both Program and Preview, the faceplate Tally Light will
glow amber.
Note: To prevent damage to TriCaster’s components when making external connections to the
tally light jacks, care should be taken that connection to the sleeve is always at ground potential.
3.8 STARTING A SESSION
If TriCaster is not already running, power it up now to reveal the Startup Screen. If TriCaster was
already running, and is in the Live Desktop or another area of the interface, you may need to
click the small [x] button at upper-right to exit; click the Back arrow at upper-left in the Session
Page to return to the Home Page.
The Startup Screen consists of two similar interface pages – Home and Session. Among other
things, the Home page is where you choose basic TriCaster session settings.
THE HOME PAGE
When no previously created sessions exist, the function selector ring dominating the Home page
defaults to the New icon, inviting you to create a new session. A default name for the new
sessions is listed at the top of the right-hand pane. Initially, the suggested name will be the
current date. Click in this area to modify the name using the keyboard if you like.
Page | 25
42. Figure 17
Continue with session creation by designating the Video Standard used in your locale
(International models only). For the moment, let’s choose HD1080i for Resolution (even if the
cameras you plan to connect are SD 4:3), then click the Start Session link below.
Note: TriCaster supports a variety of optional session configurations for live production. You can
choose either HD (High Definition) or SD (Standard Definition) operating modes. For SD mode,
select between 4:3 and 16:9 image aspect. TriCaster International models permit you to select
from three video standards according to your locale – NSTC, NTSC-J (Japan) or PAL.
THE SESSION PAGE
Clicking Start Session will take you to the Session Page.
As our intention is to configure our connections (done in TriCaster’s Live Desktop), click the Live
icon on the rotating function selector, and then click the link Start Live Production.
Page | 26
43. Figure 18
This will launch the Live Desktop, which is likely the place where you will spend most of your
time working with TriCaster.
THE LIVE DESKTOP
Figure 19
Page | 27
44. Initially, as you have yet to configure input devices or add content, the Live Desktop will look a
bit barren (Figure 19).
Take a quick look around, but then let’s continue to configure your devices. We had a brief
glimpse of the Live Desktop back in section 2.3, but we’ll examine it more closely in Chapter 4,
Live Production – coming up soon.
3.9 CONFIGURE VIDEO OUTPUT
TriCaster provides complete video input monitoring right on the Live Desktop. This allows you to
operate it without even connecting downstream video monitors or devices. You might do just
that in the case of productions intended primarily for live streaming.
Figure 20
In other cases, however, you will likely connect external monitors to the VIDEO OUT connectors
on TriCaster’s faceplate (see Section 3.6). High definition monitors will be connected to either
SDI or Component connections on the faceplate.
3.9.1 SD ANALOG CONFIGURAT ION
For standard definition monitoring, however, several types of analog connections are currently in
popular use. These include Composite, Y/C (also known as S-Video) and – at the upper end of
the analog quality range – Component. To connect an analog standard definition monitor for
use in live production*, you must specify the connection type in the Output Configuration panel.
Page | 28
45. *Note: Analog connections for SpeedEDIT™ and LiveText™ output are pre-defined, and cannot be
user-modified. Please see Chapter 17 for details.
Figure 21
1. Move your mouse pointer over the large Program Output monitor on the Live Desktop.
2. Click the Configure button (gear) that appears above its top-right corner (Figure 21) to
open the Output Configuration panel.
The first tab in this panel is labeled Program. Optional settings for SD Analog Connections are
located in the lower part of this pane (Figure 22).
Figure 22
Two options are available below for each Hardware Row:
Page | 29
46. Composite + Y/C
Component
If you select the first option for either row, composite video output is provided on the second
BNC connector in VIDEO OUTPUT (labeled Y), and Y/C is placed on the third and fourth
connectors (labeled Pb and Pr, respectively).
Note: during HD sessions, Row 2 output is always HD. As HD analog monitors always use
Component connections, the controls for Row 2 are locked during HD sessions.
3.9.2 CONFIGURE VGA OUTPUT
Figure 23
The Display Mode section of the next (VGA) tab in Output Configuration determines what is
displayed on TriCaster’s secondary video output, and the resolution of that display. You could
use this output to supply a video projection system or a subsidiary monitor.
The Screen Layout drop-down menu provides numerous optional displays, including Program,
Preview or Effects monitors, an All Sources (ISO monitors for all Switcher sources, plus a clock)
option, and more.
Set the VGA Output Resolution to the native resolution of your external device, and try the
various display options to find the one that best suits you current need.
Page | 30
47. 3.10 CONFIGURE VIDEO INPUT
Let’s continue by configuring the video sources you connected earlier (Section 3.4):
1. Click the All Monitors tab at upper-left on the Live Desktop.
2. Move your mouse back and forth over the preview monitors labeled Inputs 1-3.
3. Notice that a Configure button (gear icon) appears above the top-right corner of the
preview monitors as you do so.
Figure 24
4. Click the Configuration button to open a tabbed settings panel for Camera 1 (Figure 24).
5. Click the Connection Type button to reveal a drop-down menu listing a variety of
connection types. Select the correct format, such as 720p (Component), or 1080i (SDI),
for the video source you plan to connect to this input.
6. Close the Configuration panel for now (note that you can click the Close button or
simply ‘click outside’ the panel to close it).
Page | 31
48. 7. Continue to configure all external video sources in the same manner.
We’ll look at the other options and settings in the Configuration panel later (see Section 8.2), but
at this point you should be able to view the video inputs you have configured on their respective
preview monitors.
3.11 CONFIGURE AUDIO
Click the Audio tab in the lower third of the Live Desktop to reveal audio set up and control
features.
Figure 25
The tab houses individual control panels providing control for:
Inputs 1-3 - the three rows of external audio inputs on TriCaster’s faceplate.
DDR, Stills – internal audio sources (the DDR and Stills modules can both play sound
files).
Aux –auxiliary output to the AUX section of TriCaster’s faceplate.
Stream – network streaming audio.
Master – primary program output through the PGM output connectors.
Page | 32
49. Figure 26
There is a source Type selector drop-down at the top of the control panels for Inputs 1-3.
Clicking it opens the list of connection types.
The Type options for Input 1 are slightly different, including two Mic options (with and without
phantom power). This is because the faceplate provides two combination XLR/Phone connectors
in the analog portion of the row labeled Input 1, while Inputs 2 and 3 each contain four phone
jacks instead.
After connecting audio sources to the input connectors (see also Section 3.4.1), the first thing to
do is set the correct Type using the drop-down menu. Select Mic for professional grade
microphones or other low impedance connections, Mic + Phantom for condenser microphones
requiring supplementary power, Line for higher impedance device connections (such as a CD
player, computer audio output or VCR), and AES/EBU* or SDI Embedded* as required to connect
a digital audio source.
* (see important note about synchronizing digital audio sources in Section 3.5.1)
Note: Analog levels conform to SMPTE RP-155. The maximum input/output level is +24 dBu,
nominal input level +4 dBu (-20dBFS), and the sample rate is 48 kHz.
The Gain sliders next to the VU meters for Inputs 1-3 default to their lowest setting on first
launch. After adding audio sources, slowly bring these sliders up to pass their signals through the
system. The 0dB position represents unity gain – that is, the (post-Trim) signal is passed through
as-is, without increase or decrease.
Figure 27
Hint: As for most numeric controls in TriCaster, Shift + double-click control knobs to reset them to
their default (0dB for Gain sliders).
Page | 33
50. Some variation exists as respects the signal levels of low impedance sources. For Mic (and Mic +
Phantom) connection types, the Trim controls (Figure 27) provide a preliminary adjustment to
allow you to match the input level. Use Trim to bring the levels for microphone and similar
sources into a useful range on the VU meter.
Note: The top of the VU scale represents 0dB FS (decibels, Full Scale). Input signal levels above
this point cannot be correctly transmitted or recorded by TriCaster. For this reason, the level
display on the VU meter is drawn in red well below this limit.
To be safe, avoid recording signals that exceed-14dB FS. As in any digital system, signal levels
that would exceed the maximum are ‘clipped’ (uniformly assigned the maximum level value),
inevitably entailing losses and possibly audible glitching. Use Trim and Gain judiciously to ensure
strong signal levels without over-modulation.
3.12 CONFIGURE GENLOCK
1. If necessary, open a TriCaster session from the Startup Screen, and access the Output
Configuration panel by clicking the Configure button (the small ‘gear’ icon) that appears
at upper-right when you move the mouse over the main Program Output monitor on
the Live Desktop).
2. Click the Genlock tab in the Output Configuration panel.
Page | 34
51. Figure 28
3. The default Reference Type in the Genlock settings is SD (Bi-level), as this is by far the
most common reference signal type. However, if you supply an HD reference signal to
the Genlock input, change the setting to HD (Tri-level).
4. With the aid of downstream Waveform and Vector Scopes, adjust TriCaster’s Horizontal
and Vertical Position and Phase settings in the Genlock section of the I/O Configuration
panel.
Again, ideally both the cameras and the TriCaster should be genlocked. If they are not genlocked
to the same reference signal as the TriCaster output, a TBC (Time Base Correction) operation is
applied. Time Base Correction may drop or insert frames as necessary to maintain sync, hence it
is a less desirable approach.
Note: For a deeper explanation of genlocking, please see Section 8.1.5.
Page | 35
52. 3.13 NETWORKING
TriCaster is capable of displaying screens from networked computers running NewTek’s iVGA™
client software, or output from other supported applications (such as NewTek’s own LiveText™).
Connecting TriCaster to a local area network (LAN) may require additional steps beyond those
mentioned back when we discussed Microsoft Windows ™ activation (Section 3.2). Here is the
basic procedure involved in joining a workgroup:
1. Connect an Ethernet cable from the port on TriCaster’s back plate to your external
network.
2. (If necessary) – close the Live Desktop, go to the Home Page and click Shutdown, then
select Exit to Windows at right to access the operating system’s own desktop.
3. Right-click on the My Computer icon, and select Properties.
4. Scroll down in the right hand pane of the System panel that opens to find the Computer
name, domain and workgroups settings area.
5. Click the Change Settings link at right.
6. Click the Computer Name tab of the System Properties panel that opens.
7. Click the Change button, and enter the name of your local workgroup, as provided by
your system administrator.
8. Close the OK button.
9. Close the System control panel.
10. At this point, the network connection should be functional. If further help connecting is
required, please consult your system administrator.
The next section (Chapter 4, Live Production Walkthrough) will guide you through your first
experience using TriCaster.
Page | 36
53. 4 LIVE PRODUCTION WALKTHROUGH
This chapter provides a quick hands-on tour of the major
components and functions of your NewTek TriCaster. In a very
short time, these basics will be second nature to you.
More detailed reference material on all aspects of TriCaster follows
in Part II (Reference).
Having made the essential external connections in the previous section, let’s start your first
TriCaster session, and skim through the fundamentals:
Startup and Import
Monitoring and related features.
Network sources.
Switching between video sources and using transitions.
Mixing audio (and the Audio Follow feature).
Recording a/v clips and Program Output.
Playing stored clips using the DDR (‘Digital Disk Recorder’) .
Adding (and editing) title pages and graphics.
Using LiveMatte to create a simple chromakey effect.
PiP (Picture in Picture) effects – superimposing one video source on top of another.
Creating a LiveSet (virtual set) shot.
Using Virtual Inputs.
Streaming your program to the Internet (and recording the stream).
4.1 CREATING A SESSION
We ran through the basics of starting new sessions and configuring devices back in sections 3.8
though 3.12. If you need to review this information, go ahead and do so now. We’ll look at
these items individually again later in Part II (Reference), too.
1. In the initial Startup Screen, create a new 1080i session - name it “Practice Session”.
Page | 37
54. 2. The Sessions page of the Startup Screen will appear when you click Start Session.
3. Click the Manage icon on the function selector ring (Figure 29).
Figure 29
4.2 IMPORTING CONTENT
4. Click the Import Media button at lower-right.
5. Navigate to C:TriCasterDocumentationWalkthrough Content.
6. Click in the file pane in the system File Explorer that opens, and press Ctrl + a to select
everything – then click Open.
7. You’ll see several new file windows pop up, each showing the content you imported in
its new location. Notice that different media types are automatically sorted into their
respective destination folders (we’ll use these files later).
8. Close the file windows, click the Live icon on the selector ring, and then click Start Live
Production at right.
Page | 38
55. Although you might well never even notice, a two minute initialization period begins after you
start (or re-start) TriCaster. This ‘warm-up’ period allows the system to stabilize, ensuring
consistent performance of various components (for example, video clips playing in the DDR
before the end of initialization could skip some frames). See Section 6.4.1 for more information.
At this time, though, we want to begin our tour of the Live Desktop with consideration of the
monitoring features and options it provides.
4.3 MONITORING
4.3.1 PROGRAM OUTPUT
Inevitably, you’ll be paying a lot of attention to the main Program Output monitor (Figure 30),
found at the right side of the Live Desktop in the upper (monitoring) section. This display shows
you what you are sending to downstream devices – and your viewing audience.
Situated beneath the monitor itself are Stream, Record and Grab buttons, their respective
Configuration buttons and time/counter fields (we’ll look at those features later).
Figure 30
Page | 39
56. Hint: Move your mouse over Program Output, then click the Configure button (gear) that
appears above it to open a tabbed panel containing Proc Amp and Genlock settings.
4.3.2 ALL MONITORS
Click the All Monitors tab at upper left to view dedicated (ISO) monitors for all three main video
inputs, along with an array of other previews.
These include monitors showing the current playlist items in the DDR, Still and Titles modules,
and the Network source – such as an iVGA input or LiveText™ title from another computer on
the network.
Figure 31
The source currently selected on the Program row is highlighted in red. The current Preview row
selection has a green highlight, while the Effects row border selection is tinted blue.
Note that the ISO monitors are interactive:
9. Click a monitor once to select the corresponding source on the Switcher’s Preview row.
10. Click the Preview monitor again to perform a Take (swap) between the Program and
Preview row sources on output.
11. Double-click any monitor to send that source immediately to Program output.
Page | 40
57. And, as discussed in Section 3.10, the Camera 1-3, Effects and Preview monitors display a
Configuration button allowing input type selection and more, including Proc Amp (see Section
8.2.2) and LiveMatte controls (see Section 4.10).
Figure 32
Further, ISO monitors provide popup contextual controls including things like Play or Stop
(Freeze), and Network source selection (see Section 7.2.1).
4.3.3 SWITCHER MONITORS
Figure 33
In this configuration, the left section of the Live Desktop’s monitoring section displays two larger
preview panes. These show just the video sources currently selected on the Effects and Preview
row in the Switcher.
You can use these larger monitors to sample the video feed from any source by selecting them
one at a time on Preview or Effects, but they are handy in other ways too. Among other things,
Page | 41
58. they provide a convenient view for adjusting LiveMatte or LiveSet effects. Hover the mouse over
the Preview or Effects monitor, then click the Configure button (gear) above to display the
settings for the current video source (i.e., the one selected on the corresponding Switcher row.)
Hint: Unlike the ISO monitors, these monitors do not feature interactive switching functions, nor
of course are colored borders required to indicate their Switcher selection status.
4.4 AUDIO MIXER
Having previously connected and configured your audio inputs, let’s explore a few of the other
features in the Audio tab. You will need to have speakers connected to (at least) the first two
connectors (channel 1 and 2) in the PGM row of TriCaster’s Analog Audio Out section (even
better, if you have them handy, connect a pair of stereo headphones and put them on).
4.4.1 MUTE, MONO AND BALAN CE
1. Click the DDR tab
2. Click the Add button in the DDR pane
3. Click the Practice Session entry under the heading Audio (in the Location list at left).
Figure 34
Page | 42
59. 4. Find the icon named “3tone_quad.WAV” in the file pane. This is a four channel audio
file, with a mid-range tone on channel 1, a higher tone on channel 2, while both
channels 3 and 4 both carry a lower tone.
5. Select the icon for this file, and click OK to add this sound file to the DDR playlist.
6. Turn on both Single and Loop for the DDR, then turn Follow off for the DDR
7. Click the Audio tab, and Mute Inputs 1-3 (click the speaker icons at upper-right in each
input control panel, so they show a red stroke through them).
Figure 35
8. Make sure DDR audio is not muted (Figure 35).
9. Set the DDR’s Gain slider to 0dB (you can do this quickly by holding down the keyboard
Shift key while double-clicking the Gain knob.)
Figure 36
Page | 43
60. 10. Click the DDR’s Play button.
If you have stereo speakers or headphones connected, you should now hear two distinct
tones – a mid-range tone from the left speaker (connected to Output CH1) and a higher
pitched tone from the right speaker (connected to Output CH2).
Hint: If you happen to have a ‘surround sound’ speaker setup with front and rear
speakers, you will also hear another even lower tone coming from the rear speakers.
You can also observe that the VU meter shows matching levels for all four input
channels (Figure 36).
11. Next, drag the Balance slider all the way to the left. As you do so, observe that the level
on channels 2 and 4 are gradually reduced. At the extreme left position, these two
channels are completely silent. Only the mid-range tone (on channel 1) is heard, and
only from the left speaker at that – see Figure 37.
Figure 37
12. Moving the slider to the right (of center) has the opposite effect, reducing channels 1
and 3 – doing so without any effect on the other 2 channels. At the extreme right
position, only the mid-range tone from the DDR file is audible (and only from the right
speaker).
The lesson here is that – unlike Mono, considered shortly, or Pan – Balance does not ‘move’
audio from one channel to another. You cannot use it to ‘blend’ channel 1 with channel 2, for
Page | 44
61. example. Balance regulates the levels for one pair of channels (1 and 3, or 2 4) at a time, and
does not affect the other pair in doing so.
Let’s consider the effect of the Mono switch next:
13. Center the Balance control once again, so that you hear the mid-tone exclusively from
the left speaker, and higher tone from the right only.
14. Click the Mono switch. Notice that now a blend of the (channel 1) mid-range tone and
(channel 2) higher tone issue from both speakers.
15. To confirm that for yourself, slide the Balance knob to the extreme left. Although sound
is now issuing only from the left speaker, you can hear both tones.
16. Click Stop in the DDR
Note: the Mono switch has no effect on channels 3 and 4. These two channels are
never blended with channels 1 and 2 on output.
4.4.2 PAN
The Pan control looks much like the Balance slider, but has special abilities. Pan is uniquely
available for Input 1, and even then only appears when one of the two Mic input Types is
chosen.
Pan
Figure 38
A Pan slider is provided for each of the two channels in the Input 1 section (when Mic is
selected). Sliding the Pan knob left or right actually moves (or ‘pans’) the audio from its original
channel onto its neighbor.
Page | 45
62. For example, when the Pan knob for Mic 2 is at the extreme right, all of the sound from that
source is sent to output channel 2. Moving the slider leftward places an increasing amount of
the sound from Mic 2 on output channel 1. When the slider reaches the extreme left position,
the sound from Mic 2 is now entirely sent to output channel 1.
Hint: In their default center position, the two Pan controls have exactly the same effect as clicking
Mono. Actually, this is why a Mono is not needed in this case.
Pan thus provides precise control over where the audio from either Mic input is heard – whether
exclusively on output channel 1, 2, or whether differing levels from either source is sent to both
outputs.
4.4.3 TALK
17. Start the DDR playing the audio tone file again.
18. Enable the Talk switch in Input 1, but watch the DDR VU meter as you do so.
Talk is an abbreviation of “Talk Over”. Enabling it causes the level for all other audio sources to
drop off by 20dB, allowing Mic 1 and 2 to dominate output. This is very useful for public address
announcements, which is principal purpose.
4.4.4 FOLLOW
Figure 39
19. Connect cameras to both Video In rows 1 and 2.
20. Connect two (audibly different) active audio sources to Audio In rows 1 and 2.
21. Enable the Follow switch in the Audio Mixer for both Input 1 and Input 2.
22. Select the button for video Input 1 on the Switcher’s Program row.
23. Select the button for video Input 2 on the Switcher’s Preview row.
24. Click the Audio Mixer tab.
25. Click the Switcher’s Take button
Page | 46
63. Notice that when the video source assigned to Input 1 is on output, you hear its associated audio
input. When you perform a Take placing Input 2 on output, the audio source connected to row 2
in the Audio In section is heard.
When Follow is enabled for an audio source, its sound is automatically sent to output whenever
the associated video source is displayed on output. In this case, the levels shown in the VU
meter for that audio source are drawn in color. When you switch away from that video source,
the VU meter still shows audio levels, but the graph is drawn in black and white (providing
confirmation that audio is present even before you switch).
Hint: Follow even works when the associated video source is displayed on Output as an Overlay or
Virtual Input source.
4.5 NETWORK SOURCES
Perhaps you’d like to be able to add Microsoft PowerPoint® output, web pages, Skype™ video
calls, application displays, titles and graphics from NewTek’s LiveText™ or other exotic content to
your productions. TriCaster supports all such displays as Switcher sources from computers on
the same network via the supplied iVGA™ client application (not required for LiveText).
4.5.1 IVGA CLIENTS
1. For a Microsoft Windows® client, copy the iVGA program from the TriCaster iVGA
folder (inside C:TriCaster) to the sending computer.
For OS X client systems, copy the file iVGA.dmg.zip from the same folder to the Mac.
Unzip it by double-clicking it; mount the disk image (.dmg file) in the same manner, then
drag the iVGA program icon into Applications. (See Section 9.1 for more detail).
2. Connect TriCaster to the client computer via the local network. (For computer-to-
computer connections, use the supplied crossover cable to connect directly to
TriCaster).
3. Double-click the iVGA icon on the second computer.
Page | 47