1. SPECIAL APPLICATION PRODUCTS
Tire Handling
Designed to handle tires ranging from passenger car sizes to large mining truck wheels.
These attachments offer a safe, practical and economically method for handling tires in
various applications from warehousing to wheel replacement. This type of attachment can
be offered in a few different ways described below. As with all special application designed
units, detailed load information is required to determine the features for each attachment.
1. Dedicated Tire Manipulator DTI-Series
Integral on Pin mounting
Frame and arms dedicated for handling tires only
Designed to handle large heavy tires with rim.
Four function attachment, Clamp, Sideshift,
Frame Rotate, and Contact Pad Rotation.
Optional joystick electronic controls.
Various capacities and tire size ranges.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
2. SPECIAL APPLICATION PRODUCTS
Tire Handling
2. Fork Clamp with Tire Tipping Pads
Based on standard Fork Clamp.
ITA Class III and IV mounting
Slip On fork mounted arms with
powered 90 degree tipping pads to
handle a single tire.
Slip on arms require single function
and are supplied with QD hydraulic
hose couplers.
Tire capacities up to 5,500 lbs. and
diameters up to 85 inches.
Typically for trucks 8,000 lbs to
15,000 lbs Capacity
Can be offered as sideshifting or
with 360 degree frame rotation.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
3. SPECIAL APPLICATION PRODUCTS
Tire Handling
3. Roll Clamp Design
ITA hook mounting.
Based on standard Pivot Arm Roll Clamp
with special contact pads.
360 degrees frame rotation. 180 degree
stop group is available.
Two function attachment, clamp and
rotate.
Various size contact pads, capacities and
diameter ranges available.
Designed to handle stack of tires for
warehousing and transport applications.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
4. SPECIAL APPLICATION PRODUCTS
Tire Handling
4. Tire Stack Handler 50D-TSH-SP
Specially designed to grab and compress stack of tires for loading transport trailers.
Compressing the stack to fit into the trailer, allows more tires to be shipped.
Unit includes a specially designed mast with mounting brackets to fit truck.
Consists of two independent top and bottom clamping frames.
Bottom clamp based on 50D series bale clamp. Top clamp is specially modified bale clamp.
Designed to fit 6,000 lbs capacity lift trucks.
This is a four function unit. Top and bottom clamps are operated (raise/lower & open/close)
independently as required to handle the stack of tires.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
5. SPECIAL APPLICATION PRODUCTS
Tire Handling
5. Hydraulic Turnafork Clamp
This type of attachment offers the versatility of a clamp arm and fork positioner all in one.
The fork tines can be hydraulically rotated 90 degrees from a vertical to horizontal position
and vice versa as required.
With the tines in the horizontal position, the unit can be utilized as a fork positioner to
easily carry palletized loads. With the tines rotated to the vertical position, this unit can
clamp large tires easily.
These are typically two function attachments
(clamp and arm rotation) but sideshifting feature
can be offered. A solenoid valve is normally used
when sideshift feature is needed.
The fork tines can be offered with smooth facing
or various other facings. Rigid tines or
articulating are available to suit the application.
Models available from 4,000 lbs. to 8,000 lbs.
capacity.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785
6. SPECIAL APPLICATION PRODUCTS
Tire Handling
6. Tire Chamfered Forks
Based on a standard fork clamp with special forks.
Forks have the top inside corners specially chamfered to handle tires. This type of chamfer
allows the forks to easily slide under the tire.
Typically available in a 50D-CFS series, but various capacities and opening ranges and fork
sizes are available to suit a specific application.
7. Slip On Tire Pads
Designed as a simple low cost alternative to handle
single or stack of tires.
Must be used with a fork clamp attachment.
Clamp forks need to have a hole drilled to secure
pads with locking pin.
Various pad sizes available to suit application.
______________________________________________________________
Cascade Canada Ltd. Jan. 2012
5570 Timberlea Blvd., Mississauga, Ontario
Tel. 905-629-7777 Toll Free 1-800-380-2272 Fax. 905-629-7785