MONA 98765-12871 CALL GIRLS IN LUDHIANA LUDHIANA CALL GIRL
Hybrid solar and wind street light
1. Hybrid Solar & Wind Street Led Light
A hybrid solar & wind street light system included : solar panel, wind turbins,LED Light source,
battery, controller, pole, frame, battery box, etc.
2. Street Led Light 2*28W
A. LED light source luminous flux:
Our LED chip is American Bridgelux 140LM/W, but usually it’s
only 80~90lumens in the market. For example, our 60W light,
totally 7200LM (60W*120LM/W=7200LM ), can get same
brightness as 90W from other supplier. ( 90W*80LM/W=7200LM )
That is to say, if same brightness, our light power is at least 30%
lower than other manufactures, so for solar light, it will directly
lower the configuration of whole system, and finally to save more
money for clients!
B. Spec. in details:
Total
Rated Led Color Power Lamp’s
Led Chip Input Frequency Harmonic IP Grade
Power Quantity Temperature Factor Efficiency
Distance
Brightlux
56W 28 5000-5500K DC 24V 50-60Hz >0.97 < 15% >92% IP65
1W/pc
Central Pole to Lamp Net
Life Time Environment Material Pole Height Size(mm) Gross
Illumination Pole Base Weight
>50000Hrs -30 ~ 65 Alloy 8m 30lux(8m) 35m E40 1450*60*45 10kgs 11.5kgs
C. More Pic for reference:
1
3. LED street light controller with RS232 connector
Features:
1. Independent Boost Circuit: Solved the
charging efficiency of the low-power vertical
wind generator.
2. MPPT charging way, make sure power max.
input to battery and high charging efficiency
obtained
3. 12V/24V System Automatic Recognition function.
4. Data communication with computer, we would offer software as your demands,
5. Install Remote Meter (purchased separately ) and data-communication wire if required.
Refer to the instructions provided for detailed installation procedures.
2
5. 12V 200Ah Battery ( Spec.)
1. The positive grid is made of special multi[grid alloy,which
can effectively prevent the loss of early battery
capacity,standby use the recycling with longer life.
2. To use the high purity of raw and supplementary materials,
special manufacturing process, which make product
self-discharge rate very low, with stable performance, good resistance to deep discharge.
3. Formula of special active substance and copper circular terminal structure, the battery can be
applied to the operating requirement of high-current discharge.
4. Formula of unique high and low temperature lead paste which make good charge acceptance.
5. By controlling the process of raw material and special craft, the batteries have same good
performance, stable performance, which can be used in the voltage of 48V,220V,220V,380W or
any voltages.
Specification type and Outside dimension
Outside dimension(mm)
Rated Rated Capacity Weight
Type
voltage (kg)
L W H Hmax
C20 hr C10 hr
6-FM-200 12V 214 200 522 240 218 224 64.10
Each performance parameter
Discharging Temperature -35~55℃
Charging Temperature 0~40℃
Temperature
Storage Temperature -20~40℃
Working Condition -10~40℃
Charging Mode
Charging Factor of
Applied Max.Charging Charging Time
Charging Mode Voltage temperature
Range Current (25℃)
(25℃) compensation
Standby Constant 100% 50%
13.5-13.8V -18mV/℃ 60A
Use voltage charging charging
Constant-current 24h 12h
Cycle
limited voltage 14.4-14.7V -30mV/℃ 60A
Use 16h 8h
charge
4
6. Mono Solar Panel 180W *2
Electrical Characteristics
Module Type JMSP NES72-180M
Max.poweratt(Peak) Pm(W) 180
Power tolerance (%) 0~3%
Max.system voltage (VDC) 1000
Max.power voltage Vmp (V) 36.10
Max.power current Imp(A) 4.99
Open circuit voltage Voc(V) 45.10
Short circuit current Isc(A) 5.35
Mechanical Characteristics
Number,type,and
72pcs. Monocrystalline silicon (6×12)
arrangement of cells
Cell Size mm 125×125
Dimensions:
mm 1580×808×45
Length*Width*Height
Weight Kg 15.5
Cable type, Diameter and Copper core cable, 4mm2,TUV
Length certified,900mm
Frame(type, material) Aluminum Alloy
High Transmission, Low Iron, Tempered
Front glass
Glass,3.2mm
5