1. www.acornfiresecurity.com
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ VESDA LCD Programmer
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Listings/Approvals:
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
FM, LPC, SSL, UL, ULC, VdS
Description threshold setting (day, night, weekend),
initiation of AutoLearn, wiring order, relay
The Programmer Module allows direct testing and event log review.
access to all VESDAnet devices on a VESDA
smoke detection system. It allows configu- Up to 14 assigned Users or Administrators
FEATURES ration and status reporting of detectors, with an individual 4 digit Personal Identifi-
displays and interfaces and is required when cation Number (PIN), and one Distributor,
◗
User Friendly Menu System installing, commissioning and maintaining can log onto a VESDAnet system under one
◗ a VESDA network. By incorporating a user of three levels of access which are password
Supports Multiple friendly menu, navigation through the protected:
Languages
comprehensive features of VESDAnet is
◗
Single Point Access to convenient and simple. User (USR) is only able to view parameters,
Entire VESDAnet System check status, alarms and reset the system.
◗
Alarm and Fault Simulation The programmer module is available as a
◗ hand-held device or can be mounted into Administrator (ADM) has access to most
Shows Wiring Order a LaserPLUS or LaserSCANNER detector, a commands and programming parameters.
◗
Locates Communications remote mounting box or a 19in sub rack.
Failures Distributor (DST) is the topmost level and
◗
Password Security The two rows of large push buttons has unlimited access to all commands and
◗ enable the user to log ON and navigate parameters in the system.
Hand Held or Remote through the menu trees to the various
Mounting command and parameter setting functions. Lost PIN numbers can be overcome by
◗
Automatic Logoff when The top row of keys are called "Soft Keys" obtaining a once only pass number from
Inactive and are assigned programming options your VESDA dealer.
◗
Backlit LCD Screen
appropriate to the screen being viewed.
The programmer automatically logs OFF
Some of the parameters that can be when not in use for more than 10 minutes.
accessed via the programmer include de- The user is prompted with a beeping sound
vice status reporting, zone number and at 1 minute and at 15 seconds before log
name allocation, flow normalisation, alarm OFF Any key may be pressed to cancel the
.
automatic log OFF process.
Programming Functions
◗
System Configuration
◗
Detector Zone Configuration and set up
◗
Detector Zone Control
◗
System Status
◗
Smoke Threshold and Detector
Sensitivity Settings
◗
Event Log Interrogation
◗
Commissioning and Testing
◗
Set Date and Time
◗
Referencing
◗
AutoLearn™
◗
Passwords and User Configuration
◗
System Fault Diagnostic
www.acornfiresecurity.com