We specialise in brick pavers, house bricks, retaining and garden wall blocks, stone and limestone products and building masonry block. For your convenience, we’re open 7 days a week. We have a number of spectacular display locations all local to you! At the Australian Paving Centre we have FREE product information packs; so please ask for one when you contact our stores.

1. Architectural
Architectural Masonry - Ref: CM.AM.0606
CM0506_K2094
Melbourne - Essendon (Head Office)
264 Keilor Road North Essendon, VIC 3041
phone: 03) 9375 8500 I fax: 03) 9374 4736
Bendigo
69 Collins Street Kangaroo Flat, VIC 3555
phone: 03) 5447 8866 I fax: 03) 5447 0399
Newcastle
Old Maitland Road Sandgate, NSW 2304
phone: 02) 4967 3611 I fax: 02) 4960 1187
South Australia
Cnr Grand Junction & Blakeney Rds Ottoway, SA 5013
phone: 08) 8304 2323 I fax: 08) 8341 1101
C&M Brick Pty Ltd
ABN: 14 055 701 034
Canberra
6 Tennant Street Fyshwick, ACT 2609
phone: 02) 6239 1255 I fax: 02) 6280 7284
Nowra
270-274 Princes Hwy South Nowra, NSW 2541
phone: 02) 4421 3500 I fax: 02) 4421 3082
Sydney
20 Kelso Crescent Moorebank, NSW 2170
phone: 02) 9822 6822 I fax: 02) 9601 7446
www.cmbrick.com.au
Melbourne - Campbellfield
194 Northbourne Road Campbellfield, VIC 3061
phone: 03) 9305 0900 I fax: 03) 9303 9035

2. Architectural Masonry
C&M’s diverse range of architectural masonry products offers the architect and designer
a variety of colour, style and texture providing an ideal and distinctive choice for both
residential and commercial application.
Styles and colours have been carefully selected to meet both traditional and modern design.
With 2 standard aggregate bases, 8 colours and 5 finishes, it is possible to specify up to
80 combinations of colour, aggregate and surface texture.
Smooth Stone
Coloured blocks in their natural
moulded state.
Sandhurst Stone
Coloured blocks with a split texture.
Pitched Stone
Coloured blocks with a pitched texture.
Macquarie Stone
Large coloured blocks with a pitched
or split texture.
Oatmeal Honed Designer Masonry
Designer Masonry Honed
Coloured blocks with a honed finish.
C&M believes quality is paramount to achieving
a successful product. Accordingly, all C&M
Architectural Masonry products are manufactured
Designer Masonry Shot-blast
with efflorescence inhibitors and colour fastening
Coloured blocks with a shot-blasted
finish.
agents. These additives ensure reduced water
absorption, minimisation of efflorescence,
reduced mould and water staining and continued
front cover image: Oatmeal Sandhurst Stone & Oatmeal Honed Designer Masonry
colour vibrancy.

3. SUNSTONE
DEEP TAUPE
OATMEAL
SUNSTONE
DEEP TAUPE
IVORY
OATMEAL
SUNSTONE
DEEP TAUPE
Designer Masonry Honed River Gravel
OATMEAL
IVORY
Smooth Stone
Designer Masonry Honed Golden Glaze
IVORY
Sandhurst, Pitched or Macquarie Stone
Smooth Stone
Colour Chart
IVORY
OATMEAL
SUNSTONE
DEEP TAUPE
FOSSIL
FOSSIL
FOSSIL
FOSSIL
STEEL
STEEL
STEEL
STEEL
EBONY
EBONY
EBONY
EBONY
Sunstone Smooth Stone
*All Smooth Stone colours are
also available in shot-blast finish.
BONDI BLEND
Technical Information
Standards:
All C&M Architectural Masonry products are manufactured to
Australian Standards AS 4455 Masonry Units and Segmental
Pavers and tested for compliance with AS 4456 Masonry Units
and Segmental Pavers – Methods of Test. Mortar should be
accurately batched and conform to AS3700.
Control Joints:
Should extend for the full height of the wall and be spaced
at a maximum distance of 6 metres apart where walls are
not interrupted by full height doorways or window openings
(refer Australian Standards).
Joint Reinforcement:
Masonry mesh is recommended at height intervals of 600mm,
and in the two courses above and below all openings. Lap mesh
at least 150mm at all joints and intersections, except at control
joints where a slip joint must be provided. For 90mm walling
use 50mm reinforcement mesh and for 190mm walling use 150mm
reinforcement mesh.
General Guidelines:
All C&M Architectural Masonry products should be laid dry,
so covering on site is recommended. Whenever work is stopped,
the tops of walls should be covered to protect from moisture during
construction. All mortar joints should be allowed to set to ‘thumb
print’ hardness before tooling. Brush away excess mortar with
a semi-stiff brush at the end of each day’s work.
Sound Transmission:
The statutory requirements for sound attenuation are contained
in the Building Code of Australia (BCA) which requires that some
walls of some buildings be capable of preventing a large proportion
of incident sound from passing from one wall side to the other.
These requirements are set out in Section F5 of the BCA. Refer
to C&M Fire and Sound brochure for more information.
Cleaning:
Care should be taken to keep stone as clean as possible during
laying. C&M recommend the guidelines within CMAA document
MA41 Cleaning and Maintenance of Concrete Masonry Structures.
Ordering:
C&M Architectural Masonry products are manufactured from
natural materials and will vary in colour and texture from batch
to batch. All products must be ordered at the one time to ensure
that they are supplied from the same batch. Product should be
blended from different pallets to ensure an even mix of colour
throughout any given wall.
Fire Resistance:
Australian Standard AS 3700 Masonry Structures sets out the
method for determining fire resistance to walls. The Building Code
of Australia requires walls to be designed for insulation, integrity
& structural adequacy. C&M have had extensive CSIRO testing
for FRL and subsequently have a large range of masonry products
meeting the requirements of the building code. Refer to the C&M Fire
and Sound brochure.
Claims:
All product must be inspected prior to installation to ensure
satisfaction of colour and texture. No claims will be accepted once
product has been installed.
Sunstone Smooth Stone
C&M’s Smooth Stone offers a modern and
creative alternative to standard masonry
in a large format module.
Create subtle textures and stunning effects by using
C&M’s Smooth Stone either on its own or combined
Oatmeal Smooth Stone
with other stone textures.

4. Sandhurst Stone
Sunstone Sandhurst Stone
Sandhurst Stone is a versatile masonry product lending itself to the design of both contemporary
and traditional buildings.
Sandhurst Stone is made by manufacturing larger solid units and then splitting into two to create a natural ‘split stone’
appearance. Exposing the natural aggregates, Sandhurst Stone is supplied in a variety of colours and an innovative
range of product shapes and sizes. Sandhurst Stone may be used alone or combined with C&M’s many other finishes.

5. Macquarie Stone
Ivory Sandhurst Stone & Ivory Honed Designer Masonry
Oatmeal Sandhurst Stone
Full & Half Blocks in Bondi Blend
Bondi Blend Macquarie Stone with Smooth Bevelled Cornerstones
Macquarie Stone is the largest module masonry stone product available
Equivalent to two standard bricks in length and three standard bricks in height and manufactured with
complimentary components in split, pitched and smooth bevelled surface finishes, Macquarie Stone is the
Smooth Bevelled Cornerstones
ultimate block for buildings reminiscent of the past whilst providing inspiration for designers of today.
Oatmeal Sandhurst Stone Townhouse & Oatmeal Honed Designer Masonry fence

6. Pitched Stone
Oatmeal Pitched Stone with Oatmeal Smooth Stone and Ebony Honed Designer Masonry
Sunstone Pitched Stone
Flame (custom colour) Pitched Stone with Flame (custom colour) Smooth Stone as quoining and Ebony Honed Designer Masonry

7. Pitched Stone
Oatmeal Pitched Stone with Oatmeal Smooth Stone and Ebony Honed Designer Masonry
Sunstone Pitched Stone
Sunstone Pitched Stone with Smooth Stone corners
Pitched Stone is formed as per Sandhurst Stone but is then pitched from the sides to give a three
dimensional look and feel to the face of the product. The result being that each piece gains its own
unique appearance.
Used in both contemporary and traditional projects with stunning effect, pitched stone can be used on its own or combined
with C&M’s Smooth Stone or Designer Masonry for a truly distinctive finish.
Flame (custom colour) Pitched Stone with Flame (custom colour) Smooth Stone as quoining and Ebony Honed Designer Masonry

8. Macquarie Stone
Full & Half Blocks in Bondi Blend
Bondi Blend Macquarie Stone with Smooth Bevelled Cornerstones
Macquarie Stone is the largest module masonry stone product available
Equivalent to two standard bricks in length and three standard bricks in height and manufactured with
complimentary components in split, pitched and smooth bevelled surface finishes, Macquarie Stone is the
Smooth Bevelled Cornerstones
ultimate block for buildings reminiscent of the past whilst providing inspiration for designers of today.

9. Sandhurst Stone
Designer Masonry
Ebony Honed Designer Masonry with Golden Glaze Aggregate
All C&M Smooth Stone products can undergo
additional value-added manufacturing processes to
expose the stone aggregates with alternative textures.
Textures available in Designer Masonry are:
Honed
The face of the product is ground to give a sharp look and feel
while exposing the aggregate matrix.
Shot-Blast
The face of the product is shot-blasted creating a textured finish
with a subtle hint of exposed aggregate.
Ivory Honed Macquarie Stone with Golden Glaze Aggregate
Sunstone Sandhurst Stone
Sandhurst Stone is a versatile masonry product lending itself to the design of both contemporary
and traditional buildings.
Sandhurst Stone is made by manufacturing larger solid units and then splitting into two to create a natural ‘split stone’
appearance. Exposing the natural aggregates, Sandhurst Stone is supplied in a variety of colours and an innovative
range of product shapes and sizes. Sandhurst Stone may be used alone or combined with C&M’s many other finishes.
Sunstone Honed Designer Masonry with Golden Glaze Aggregate

10. SUNSTONE
DEEP TAUPE
OATMEAL
SUNSTONE
DEEP TAUPE
IVORY
OATMEAL
SUNSTONE
DEEP TAUPE
Designer Masonry Honed River Gravel
OATMEAL
IVORY
Designer Masonry Honed Golden Glaze
IVORY
Sandhurst, Pitched or Macquarie Stone
Smooth Stone
Colour Chart
IVORY
OATMEAL
SUNSTONE
DEEP TAUPE
FOSSIL
FOSSIL
FOSSIL
FOSSIL
STEEL
STEEL
STEEL
STEEL
EBONY
EBONY
EBONY
EBONY
*All Smooth Stone colours are
also available in shot-blast finish.
BONDI BLEND
Technical Information
Standards:
All C&M Architectural Masonry products are manufactured to
Australian Standards AS 4455 Masonry Units and Segmental
Pavers and tested for compliance with AS 4456 Masonry Units
and Segmental Pavers – Methods of Test. Mortar should be
accurately batched and conform to AS3700.
Control Joints:
Should extend for the full height of the wall and be spaced
at a maximum distance of 6 metres apart where walls are
not interrupted by full height doorways or window openings
(refer Australian Standards).
Joint Reinforcement:
Masonry mesh is recommended at height intervals of 600mm,
and in the two courses above and below all openings. Lap mesh
at least 150mm at all joints and intersections, except at control
joints where a slip joint must be provided. For 90mm walling
use 50mm reinforcement mesh and for 190mm walling use 150mm
reinforcement mesh.
General Guidelines:
All C&M Architectural Masonry products should be laid dry,
so covering on site is recommended. Whenever work is stopped,
the tops of walls should be covered to protect from moisture during
construction. All mortar joints should be allowed to set to ‘thumb
print’ hardness before tooling. Brush away excess mortar with
a semi-stiff brush at the end of each day’s work.
Sound Transmission:
The statutory requirements for sound attenuation are contained
in the Building Code of Australia (BCA) which requires that some
walls of some buildings be capable of preventing a large proportion
of incident sound from passing from one wall side to the other.
These requirements are set out in Section F5 of the BCA. Refer
to C&M Fire and Sound brochure for more information.
Cleaning:
Care should be taken to keep stone as clean as possible during
laying. C&M recommend the guidelines within CMAA document
MA41 Cleaning and Maintenance of Concrete Masonry Structures.
Ordering:
C&M Architectural Masonry products are manufactured from
natural materials and will vary in colour and texture from batch
to batch. All products must be ordered at the one time to ensure
that they are supplied from the same batch. Product should be
blended from different pallets to ensure an even mix of colour
throughout any given wall.
Fire Resistance:
Australian Standard AS 3700 Masonry Structures sets out the
method for determining fire resistance to walls. The Building Code
of Australia requires walls to be designed for insulation, integrity
& structural adequacy. C&M have had extensive CSIRO testing
for FRL and subsequently have a large range of masonry products
meeting the requirements of the building code. Refer to the C&M Fire
and Sound brochure.
Claims:
All product must be inspected prior to installation to ensure
satisfaction of colour and texture. No claims will be accepted once
product has been installed.

11. Architectural Masonry
Dimensions (mm)
LxHxW
The Range
Honed
Shot Blasted
90
•
•
•
190 x 190 x
90
•
•
•
1/4 Length Hollow (Vic only)
90 x 190 x
90
•
•
•
10.31
Full Length Solid*
390 x 190 x
90
•
•
•
10.33
1/2 Length Solid (Vic only)
190 x 190 x
90
•
•
•
15.01
Full Length Hollow
390 x 190 x 140
•
•
•
15.22
Corner Hollow
340 x 190 x 140
•
•
•
15.03
1/2 Length Hollow (Vic only)
190 x 190 x 140
•
•
•
Smooth Stone
20.01
Full Length Hollow
390 x 190 x 190
•
•
•
Coloured blocks in their natural
moulded state.
20.03
1/2 Length Hollow (Vic only)
190 x 190 x 190
•
•
•
10.101
Full Length*
390 x 190 x
90
10.103
1/2 Length (Vic only)
190 x 190 x
90
90
10.01
Full Length Hollow
390 x 190 x
90
10.02
3/4 Length Hollow (Vic only)
290 x 190 x
C&M’s diverse range of architectural masonry products offers the architect and designer
a variety of colour, style and texture providing an ideal and distinctive choice for both
residential and commercial application.
10.03
1/2 Length Hollow (Vic only)
10.04
Styles and colours have been carefully selected to meet both traditional and modern design.
With 2 standard aggregate bases, 8 colours and 5 finishes, it is possible to specify up to
80 combinations of colour, aggregate and surface texture.
Sandhurst Stone
10.109
1/2 Height
390 x
Sandhurst Stone
15.101
Full Length
Coloured blocks with a split texture.
20.101
12.5
12.5
12.5
12.5
Pitched
•
Smooth Stone
Split
Smooth
•
Description
•
Type
12.5
Product
No per m2
Textures
•
•
390 x 190 x 140
12.5
390 x 190 x 190
12.5
•
20.103
1/2 Length (Vic only)
190 x 190 x 190
10.111
Full Length*
390 x 190 x
90
Pitched Stone
10.113
1/2 Length
190 x 190 x
90
Coloured blocks with a pitched texture.
20.111
Full Length
390 x 190 x 190
20.113
1/2 Length
190 x 190 x 190
10.LQ
Cornerstone
390 x 190 x 190 x 90
10.LQS
Cornerstone
390 x 190 x 190 x 90
10.LQP
Cornerstone
390 x 190 x 190 x 90
20.105
Cornerstone (n/a in Vic)
390 x 190 x 190
20.115
Cornerstone (n/a in Vic)
390 x 190 x 190
10.39
Sill Block
190 x 190 x
90
•
20.39
Sill Block
190 x 190 x 190
•
10.248
Full Length
470 x 248 x 105
10.249
Cornerstone
10.250
• C&M Designer Masonry requires
a secondary manufacturing process
that requires additional lead time
to C&M’s other Architectural
Masonry products.
•
Full Length
• C&M Architectural Masonry is made
to order, please remember to check
lead times when placing your order.
• Quantities per pallet may vary
from state to state, please refer
to your C&M representative for
further details.
•
25
Notes
Pitched Stone
Cornerstones
Macquarie Stone
Large coloured blocks with a pitched
or split texture.
Oatmeal Honed Designer Masonry
Designer Masonry Honed
Coloured blocks with a honed finish.
C&M believes quality is paramount to achieving
Sill Blocks
Macquarie Stone
90 x
•
12.5
•
•
12.5
• Custom colours and/or aggregates
may be available on request. Please
consult your C&M representative.
•
•
•
•
•
•
•
•
•
•
•
335 x 248 x 105
•
•
1/2 Length
230 x 248 x 105
•
•
10.252
Full Length Bevelled
470 x 248 x 105
absorption, minimisation of efflorescence,
10.253
1/2 Length Bevelled
reduced mould and water staining and continued
10.620
Bevelled Cornerstone
a successful product. Accordingly, all C&M
Architectural Masonry products are manufactured
Designer Masonry Shot-blast
with efflorescence inhibitors and colour fastening
Coloured blocks with a shot-blasted
finish.
agents. These additives ensure reduced water
front cover image: Oatmeal Sandhurst Stone & Oatmeal Honed Designer Masonry
• Additional fractions can be made
by cutting, splitting or bolstering
blocks on site, which minimises
batch variation.
colour vibrancy.
*1 in 8 is a universal block for fractions
8
•
** **
230 x 248 x 105
•
** **
470 x 248 x 235 x105
•
8
** Secondary process is applied to the reverse side of these blocks

12. Architectural
Architectural Masonry - Ref: CM.AM.0606
CM0506_K2094
Melbourne - Essendon (Head Office)
264 Keilor Road North Essendon, VIC 3041
phone: 03) 9375 8500 I fax: 03) 9374 4736
Bendigo
69 Collins Street Kangaroo Flat, VIC 3555
phone: 03) 5447 8866 I fax: 03) 5447 0399
Newcastle
Old Maitland Road Sandgate, NSW 2304
phone: 02) 4967 3611 I fax: 02) 4960 1187
South Australia
Cnr Grand Junction & Blakeney Rds Ottoway, SA 5013
phone: 08) 8304 2323 I fax: 08) 8341 1101
C&M Brick Pty Ltd
ABN: 14 055 701 034
Canberra
6 Tennant Street Fyshwick, ACT 2609
phone: 02) 6239 1255 I fax: 02) 6280 7284
Nowra
270-274 Princes Hwy South Nowra, NSW 2541
phone: 02) 4421 3500 I fax: 02) 4421 3082
Sydney
20 Kelso Crescent Moorebank, NSW 2170
phone: 02) 9822 6822 I fax: 02) 9601 7446
www.cmbrick.com.au
Melbourne - Campbellfield
194 Northbourne Road Campbellfield, VIC 3061
phone: 03) 9305 0900 I fax: 03) 9303 9035